Cisco Carrier Routing System Hardware
Documentation Revision Roadmap
Last Update: September 3, 2013
This document provides the latest revision information for the documents available on the Cisco Carrier
Routing System Install and Upgrade Guides product support page, located at:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
See the following links for details of the Cisco Carrier Routing System Install and Upgrade Guides,
listed by product and title:
•
Cisco CRS 4-Slot Line Card Chassis, page 2
•
Cisco CRS 8-Slot Line Card Chassis, page 3
•
Cisco CRS 8-Slot Line Card Chassis Enhanced Router, page 5
•
Cisco CRS 16-Slot Line Card Chassis, page 9
•
Cisco CRS 16-Slot Line Card Chassis Enhanced Router, page 10
•
Cisco CRS PLIMs, page 12
•
Cisco CRS SIP and SPA Hardware Installation Guide, page 14
•
Regulatory Compliance and Safety Information, page 15
•
Cisco CRS Fabric Card Chassis, page 16
•
Cisco CRS FRUs, page 17
•
Cisco CRS Multishelf System, page 19
•
Cisco CRS-3 Multishelf System, page 21
Cisco Systems, Inc.
www.cisco.com
Cisco CRS 4-Slot Line Card Chassis
Cisco CRS 4-Slot Line Card Chassis
The following sections provide a description, current revision number and publication date, and a
summary of changes for each of the Cisco CRS 4-Slot documents:
•
Installation Guide, page 2
•
Site Planning Guide, page 2
•
System Description, page 3
•
Unpacking, Moving, and Securing Guide, page 3
Installation Guide
Describes the installation and removal of the hardware components that make up the system and includes
details on the installation and removal of all field-replaceable unit hardware, including the power
modules, fan trays, system cards, and other components.
Table 1 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line
Card Chassis Installation Guide.
Table 1
Cisco CRS 4-Slot Line Card Chassis Installation Guide
Current Revision
Publish Date
Change Summary
OL-10971-10
July 2011
Added information about new CRS-LSP Label Switch
Processor (LSP) card to the following chapters:
•
Chapter 1 “Overview”
•
Chapter 4 “Installing and Removing SFCs, RPs, MSCs,
FPs, LSPs, PLIMs, and Associated Components”
Site Planning Guide
Describes the planning steps that one must take before unpacking, moving, and securing the chassis or
system. Also includes details on the space, power, and cooling requirements that need to be planned for
before installing the chassis or system.
Table 2 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line
Card Chassis Site Planning Guide.
Table 2
Cisco CRS 4-Slot Line Card Chassis Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-10804-06
August 2011
Minor editorial change to Figure 1-1 to correct a caveat.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
2
OL-26753-01
Cisco CRS 8-Slot Line Card Chassis
System Description
Describes the Cisco CRS 4-Slot Line Card Chassis from a system point of view. Also focuses on
hardware elements, including descriptions of most of the major assemblies, such as the power and
cooling systems, the switch fabric, route processor, and modular services cards. Provides background
information and the basic theory of operation for this routing system.
The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related
software documents.
Table 3 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line
Card Chassis Enhanced Router System Description.
Table 3
Cisco CRS 4-Slot Line Card Chassis System Description
Current Revision
Publish Date
Change Summary
OL-10805-10
April 2012
Added “Alarm Port” section with pin outs to Chapter 6 to fix
caveat.
Unpacking, Moving, and Securing Guide
Describes how to unpack the chassis and prepare it for placement at the installation site. Also describes
how to move the chassis from the loading dock to the installation site and how to mount it in a rack.
Table 4 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line
Card Chassis Site Planning Guide.
Table 4
Cisco CRS 4-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
Current Revision
Publish Date
Change Summary
78-17820-06
April 2011
Added information about new performance route processor
(PRP) cards (Cisco product IDs: CRS-8-PRP-6G,
CRS-8-PRP-12G). Minor editorial changes were also made.
Cisco CRS 8-Slot Line Card Chassis
The following sections provide document descriptions, current revision number and publication date,
and a summary of changes for the Cisco CRS 8-Slot Line Card Chassis documentation:
•
Installation Guide, page 4
•
Site Planning Guide, page 4
•
System Description, page 4
•
Unpacking, Moving, and Securing Guide, page 5
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
3
Cisco CRS 8-Slot Line Card Chassis
Installation Guide
Describes the installation and removal of the hardware components that make up the system and includes
details on the installation and removal of all field-replaceable unit hardware, including the power
modules, fan trays, system cards, and other components.
Table 5 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Installation Guide.
Table 5
Cisco CRS 8-Slot Line Card Chassis Installation Guide
Current Revision
Publish Date
Change Summary
OL-6256-16
June 2013
Added information about how to replace a SFP on a line card
that uses an articulated bracket.
Site Planning Guide
Describes the planning steps that need to be taken before unpacking, moving, and securing the chassis
or system and includes details on the space, power, and cooling requirements that should be planned for
prior to installing the chassis or system.
Table 6 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Site Planning Guide.
Table 6
Cisco CRS 8-Slot Line Card Chassis Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-5802-09
April 2011
Added information about new CRS-8-PRP-6G and
CRS-8-PRP-12G Performance Route Processor (PRP) cards.
Technical updates and minor editorial changes were also made.
System Description
Describes the Cisco CRS 8-Slot Line Card Chassis from a system point of view. The guide focuses on
the hardware elements, including descriptions of most of the major assemblies, such as the power and
cooling systems, the switch fabric, route processor, and modular services cards. It also provides
background information and the basic theory of operation for this routing system.
The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related
software documents.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
4
OL-26753-01
Cisco CRS 8-Slot Line Card Chassis Enhanced Router
Table 7 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Enhanced Router System Description.
Table 7
Cisco CRS 8-Slot Line Card Chassis System Description
Current Revision
Publish Date
Change Summary
OL-6345-15
April 2012
Added “Alarm Port” section with pin outs to Chapter 6 to fix
caveat.
Unpacking, Moving, and Securing Guide
Describes how to unpack the chassis and prepare it for placement at the installation site, as well as how
to move the chassis from the loading dock to the installation site and how to mount it in a rack.
Table 8 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Unpacking, Moving, and Securing Guide.
Table 8
Cisco CRS 8-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
Current Revision
Publish Date
Change Summary
78-17615-07
April 2011
Added performance route processor (PRP) card to the pallet
contents listed in the “Chassis Packaging” section.
Cisco CRS 8-Slot Line Card Chassis Enhanced Router
The following sections provide the latest revision number, publication date, and a summary of changes
for the following Cisco CRS Line Card Chassis Enhanced router documents:
•
Installation Guide, page 6
•
Site Planning Guide, page 6
•
System Description, page 7
•
Unpacking, Moving, and Securing Guide, page 8
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
5
Cisco CRS 8-Slot Line Card Chassis Enhanced Router
Installation Guide
Describes how to install power, air circulation, line card, and exterior components into and remove them
from a Cisco CRS 8-Slot Line Card Chassis Enhanced router. This installation guide does not provide
background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS
8-Slot Line Card Chassis Enhanced router.
Table 9 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Enhanced Router Installation Guide.
Table 9
Cisco CRS 8-Slot Line Card Chassis Enhanced Router Installation Guide
Current Revision
Publish Date
Change Summary
OL-25852-04
Sept 2013
Added updates to support new fan tray (CRS-8-FANTRAY-B).
OL-25852-03
June 2013
Added information about how to replace a SFP on a line card
that uses an articulated bracket.
Site Planning Guide
Describes how to plan and prepare your site facilities for the installation of a Cisco CRS Carrier Routing
System 8-slot Line Card Chassis Enhanced router (also referred to as the “Cisco CRS 8-slot LCC
Enhanced router”). The guide provides a brief description of the chassis and its components, and basic
site facilities requirements.
The guide also describes all power, cooling, and environmental specifications to consider before
ordering and installing the Cisco CRS 8-slot LCC Enhanced router and describes site facilities
requirements, such as floor space, weight requirements, receiving and staging, and installation
information to help you plan the site where the routing system will be installed.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
6
OL-26753-01
Cisco CRS 8-Slot Line Card Chassis Enhanced Router
Table 10 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Enhanced Router Site Planning Guide.
Table 10
Cisco CRS 8-Slot Line Card Chassis Enhanced Router Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-25853-02
Sept 2013
Added updates to support new fan tray (CRS-8-FANTRAY-B).
OL-25853-01
Jan 2012
Initial release of this document.
This document introduces the Cisco CRS 8-Slot Line Card
Chassis Enhanced router. The Cisco CRS 8-Slot Line Card
Chassis Enhanced router includes the following new features:
•
The mid plane on the enhanced router is redesigned to
support 400G per slot.
•
The enhanced router has its own power and cooling
subsystems.
•
A new power shelf with an upgraded 70 Amp circuit
breaker is introduced for the new Cisco CRS 8-Slot Line
Card Chassis Enhanced router.
•
The enhanced router removes the zone circuit breaker and
thus, eliminates the need to configure power-zoning.
System Description
Describes the Cisco CRS 8-Slot Line Card Chassis Enhanced router from a system point of view. The
guide focuses on the hardware elements, including descriptions of most of the major assemblies, such as
the power and cooling systems, the switch fabric, route processor, and modular services cards. It also
provides background information and the basic theory of operation for this routing system.
The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related
software documents.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
7
Cisco CRS 8-Slot Line Card Chassis Enhanced Router
Table 11 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Enhanced Router System Description.
Table 11
Cisco CRS 8-Slot Line Card Chassis Enhanced Router System Description
Current Revision
Publish Date
Change Summary
OL-25854-02
Sept 2013
Added updates to support new fan tray (CRS-8-FANTRAY-B).
OL-25854-01
Jan 2012
Initial release of this document.
This document introduces the Cisco CRS 8-Slot Line Card
Chassis Enhanced router. The Cisco CRS 8-Slot Line Card
Chassis Enhanced router includes the following new features:
•
The midplane on the enhanced router is redesigned to
support 400G per slot.
•
The enhanced router has its own power and cooling
subsystems.
•
A new power shelf with an upgraded 70 Amp circuit
breaker has been introduced for the new Cisco CRS 8-Slot
Line Card Chassis Enhanced router.
•
The Cisco CRS 8-Slot Line Card Chassis Enhanced router
removes the zone circuit breaker and thus, eliminates
power-zoning.
Unpacking, Moving, and Securing Guide
Provides instructions for unpacking the Cisco CRS 8-slot LCC Enhanced router and its components,
attaching the dolly, moving the chassis safely to its final location, and installing the chassis in a rack.
The document does not provide background information and basic theory-of-operation for anyone
wanting to understand the Cisco CRS Carrier Routing System.
Table 12 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line
Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide.
Table 12
Cisco CRS 8-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and
Securing Guide
Current Revision
Publish Date
Change Summary
OL-25855-01
Jan 2012
Initial release of this document. This document introduces the
Cisco CRS 8-Slot Line Card Chassis Enhanced router. The
Cisco CRS 8-Slot Line Card Chassis Enhanced router includes
the following new features:
•
The midplane on the enhanced router is redesigned to
support 400G per slot.
•
The router has its own power and cooling subsystems.
•
A new power shelf with an upgraded 70 Amp circuit
breaker has been introduced for the new Cisco CRS 8-Slot
Line Card Chassis Enhanced router.
•
The enhanced router removes the zone circuit breaker and
thus, eliminates power-zoning.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
8
OL-26753-01
Cisco CRS 16-Slot Line Card Chassis
Cisco CRS 16-Slot Line Card Chassis
The following sections provide the latest revision number, publication date, and a summary of changes
for the following Cisco CRS 16-Slot Line Card Chassis documents:
•
Installation Guide, page 9
•
Site Planning Guide, page 9
•
System Description, page 10
•
Unpacking, Moving, and Securing Guide, page 10
Installation Guide
Describes the installation and removal of the hardware components that make up the system and includes
details on the installation and removal of all field-replaceable unit hardware, including the power
modules, fan trays, system cards, and other components.
Table 13 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Installation Guide.
Table 13
Cisco CRS 16-Slot Line Card Chassis Installation Guide
Current Revision
Publish Date
Change Summary
OL-4594-15
Nov 2011
Added new procedures for installing and removing modular
configuration power module slot covers to Chapter 2 “Installing
and Removing Power Components.”
Site Planning Guide
Describes the planning steps that need to be taken before unpacking, moving, and securing the chassis
or system and includes details on the space, power, and cooling requirements that should be planned for
prior to installing the chassis or system.
Table 14 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Site Planning Guide.
Table 14
Cisco CRS 16-Slot Line Card Chassis Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-6326-13
Sept 2011
Updated Appendix A, “Product IDs” and Appendix C, “Cisco
CRS Series Carrier Routing System 16-Slot Line Card Chassis
Specifications.”
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
9
Cisco CRS 16-Slot Line Card Chassis Enhanced Router
System Description
Describes the hardware components that make up the chassis or system and includes details on the
chassis enclosure, power and cooling systems, and all system cards. The system description is a
reference publication that contains no procedural steps.
Table 15 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis System Description.
Table 15
Cisco CRS 16-Slot Line Card Chassis System Description
Current Revision
Publish Date
Change Summary
OL-4624-13
Jan 2012
Corrected weight of the Performance Route Processor (PRP) in
Chapter 6 “Route Processor.’
Unpacking, Moving, and Securing Guide
Describes how to unpack the chassis and prepare it for placement at the installation site, as well as how
to move the chassis from the loading dock to the installation site and how to mount it in a rack.
Table 16 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Unpacking, Moving, and Securing Guide.
Table 16
Cisco CRS 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
Current Revision
Publish Date
Change Summary
78-17535-10
August 2011
Updated this document with minor editorial changes.
Cisco CRS 16-Slot Line Card Chassis Enhanced Router
The following sections provide the latest revision number, publication date, and a summary of changes
for the following Cisco CRS 16-Slot Line Card Chassis Enhanced router documents:
•
Installation Guide, page 11
•
Site Planning Guide, page 11
•
System Description, page 11
•
Unpacking, Moving, and Securing Guide, page 12
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
10
OL-26753-01
Cisco CRS 16-Slot Line Card Chassis Enhanced Router
Installation Guide
Describes how to install components into and remove them from a line card chassis. The installation
guide does not provide background information and basic theory-of-operation for anyone wanting to
understand the Cisco CRS Series Enhanced 16-Slot Line Card Chassis.
Table 17 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Enhanced Router Installation Guide.
Table 17
Cisco CRS 16-Slot Line Card Chassis Enhanced Router Installation Guide
Current Revision
Publish Date
Change Summary
OL-25576-02
May 2012
Updates to procedures, specifications, and illustrations.
Site Planning Guide
Describes the basic facility requirements, such as floor space, power requirements, and environmental
requirements, for the Cisco CRS 16-Slot Line Card Chassis Enhanced router. The guide is intended to
help you plan the sites where the chassis will be installed. You should use this guide with Cisco site
planning coordinators and site inspectors, well in advance of the delivery of the chassis.
Table 18 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Enhanced Router Site Planning Guide.
Table 18
Cisco CRS 16-Slot Line Card Chassis Enhanced Router Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-25577-02
May 2012
Minor text, illustration, and specification updates.
System Description
Describes the Cisco CRS 16-Slot Line Card Chassis Enhanced router from a high level. It provides
background information and basic theory of operation for anyone wanting to understand the routing
system. It describes the major assemblies that comprise the routing system. It can be read as a
supplement to the site planning guide, installation documents, and software documents. This system
description focuses on the hardware elements of the routing system.
Table 19 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Enhanced Router System Description.
Table 19
Cisco CRS 16-Slot Line Card Chassis Enhanced Router System Description
Current Revision
Publish Date
Change Summary
OL-25578-02
May 2012
Minor updates to Route Processor dimensions and product
specifications.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
11
Cisco CRS PLIMs
Unpacking, Moving, and Securing Guide
Provides instructions for unpacking the Cisco CRS Series 16-Slot Line Card Chassis Enhanced router
and its components, attaching the dolly, moving the chassis safely, and securing the chassis to the floor.
This document does not provide background information and basic theory-of-operation for anyone
wanting to understand the Cisco CRS Carrier Routing System.
Table 20 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line
Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide.
Table 20
Cisco CRS 16-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and
Securing Guide
Current Revision
Publish Date
Change Summary
OL-25575-02
May 2012
Updates to dolly procedures and illustrations, and minor text
corrections.
Cisco CRS PLIMs
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS Physical Layer Interface Module (PLIM) documents:
•
Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note,
page 12
•
Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module
Installation Note, page 13
•
Cisco CRS 20 Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation
Note, page 13
Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note
Describes the Ethernet PLIMs used in the Cisco CRS router Carrier Routing System 16-slot, 8-slot, and
4-slot line card chassis (LCC). This document also provides an overview of the different Ethernet PLIMs
and provides instructions on how to remove and install a PLIM and its associated components.
Table 21 lists details of the most current release of the Cisco CRS Carrier Routing System Ethernet
Physical Layer Interface Module Installation Note.
Table 21
Cisco CRS Ethernet Physical Layer Interface Module Installation Note
Current Revision
Publish Date
Change Summary
OL-6437-13
June 2013
Added information about how to replace a SFP on a line card that
uses an articulated bracket.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
12
OL-26753-01
Cisco CRS PLIMs
Table 21
Cisco CRS Ethernet Physical Layer Interface Module Installation Note
Current Revision
Publish Date
Change Summary
OL-6347-11
May 2012
Added information about the CFP-100G-SR10 optical module on
the Cisco CRS-3 Series Router platform.
This CFP-100G-SR10 optical module enables connection to the
Cisco CRS-3 Series Router 1-port 100-GE PLIM using
multimode fiber rather than only single mode fiber.
OL-6347-10
February 2012 Added information about the articulated cable bracket for the
20-port 1-GE FLEX PLIM and the 42-port 1-GE XFP PLIM to
the “Removing a PLIM Cable Management Bracket” section and
the “Installing a PLIM Cable Management Bracket” section.
Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module
Installation Note
Describes the Packet-over-SONET/SDH (POS) physical layer interface modules (PLIMs) used in the
Cisco CRS Carrier Routing System 16-slot and 8-slot line card chassis (LCC). This document also
provides an overview of the different POS PLIMs and provides instructions on how to remove and install
a PLIM and its associated components.
Table 22 lists details of the most current release of the Cisco CRS Carrier Routing System
Packet-over-SONET/SDH Physical Layer Interface Module Installation Note.
Table 22
Cisco CRS Packet-over-SONET/SDH Physical Layer Interface Module Installation Note
Current Revision
Publish Date
Change Summary
OL-6437-03
Nov 2006
Added information about the 1-port OC-768c/STM-256c
WDMPOS PLIM to the “OC-768c/STM-256c WDMPOS
PLIM” section.
Added cable management information to the “How to Remove
or Install a PLIM Cable Management Bracket” section.
Added optics information for the 1-port OC-768c/STM-256c
WDMPOS PLIM to the “OC-768c/STM-256c WDMPOS
PLIM Interfaces” section.
Cisco CRS 20 Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note
Describes the 20 Gbps Carrier Grade Services Engine physical layer interface module (PLIM) used in
the Cisco CRS-1 router 16-slot, 8-slot, and 4-slot line card chassis (LCC). This document also provides
an overview of the PLIM and provides instructions on how to remove and install a PLIM and its
associated components.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
13
Cisco CRS SIP and SPA Hardware Installation Guide
Table 23 lists details of the most current release of the Cisco CRS Gbps Carrier Grade Services Engine
Physical Layer Interface Module Installation Note.
Table 23
Cisco CRS Gbps Carrier Grade Services Engine Physical Layer Interface Module
Installation Note
Current Revision
Publish Date
Change Summary
OL-17454-02
June 2010
Added new information about troubleshooting and configuring
the 20 Gbps Carrier Grade Services Engine PLIM.
Cisco CRS SIP and SPA Hardware Installation Guide
Describes the SIPs and SPAs that are supported on the Cisco CRS-1 Carrier Routing System. This
document also describes how to install the supported SIPs and SPAs and how to troubleshoot the
installation.
Table 24 lists details of the most current release of the Cisco CRS SIP and SPA Hardware Installation
Note.
Table 24
Cisco CRS SIP and SPA Hardware Installation Note
Current Revision
Publish Date
Change Summary
OL-17439-04
Sept 2013
Information was added to Chapter 4, “Overview: Cisco CRS
Shared Port Adapters,” about the following SPAs:
• 2-Port OC-48c/STM-16 POS SPA
• 4-Port OC-3c/STM-1 POS SPA
• 1-Port 10-Gigabit Ethernet SPA
• 10-Port Gigabit Ethernet SPA
These SPAs are now supported on the Cisco CRS-3 Flexible
PLIM.
OL-17439-03
May 2013
Information was added to Chapter 4, “Overview: Cisco CRS
Shared Port Adapters,” about the following SPAs:
• 4-Port OC-12c/STM-4 POS SPA
• 8-Port OC-3c/STM-1 POS SPA
The 4-Port and 8-Port OC-3c/STM-1 POS SPA and the 4-Port
and 8-Port OC-12c/STM-4 POS SPA are now supported on the
Cisco CRS-3 Flexible PLIM.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
14
OL-26753-01
Regulatory Compliance and Safety Information
Table 24
Cisco CRS SIP and SPA Hardware Installation Note
Current Revision
Publish Date
Change Summary
OL-17439-02
December 2012
Information about the new Cisco CRS-3 Flexible PLIM was
added, and a new chapter, Chapter 3, “Overview: Cisco CRS-3
Flexible PLIM” was created. Supported SPA types were added
to Chapter 4, “Overview: Cisco CRS Shared Port Adapters.”
OL-17439-01
March 2009
Added information about the 1-Port Clear Channel OC-3 ATM
SPA to Chapter 1, “SIP and SPA Product Overview” and
Chapter 3, “Overview: Cisco CRS-1 Shared Port Adapters.”
Added information about Dynamic Packet Transport (DPT)
support for 2-Port and 4-Port OC-48c/STM-16 POS SPA and
1-Port OC-192c/STM-64 POS/RPR XFP SPA to Chapter 3,
“Overview: Cisco CRS-1 Shared Port Adapters.”
Regulatory Compliance and Safety Information
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS Carrier Routing System Regulatory Compliance and
Safety Information (RCSI) documents:
•
RSCI for the Cisco CRS Carrier Routing System, page 16
•
RSCI for the Cisco CRS Power Distribution Unit, page 16
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
15
Cisco CRS Fabric Card Chassis
RSCI for the Cisco CRS Carrier Routing System
Describes the international agency compliance, safety, and statutory information that applies to all Cisco
CRS Carrier Routing Systems and their associated devices. This document also includes translations of
the safety warnings that appear in Cisco CRS Carrier Routing System publications.
Table 25 lists details of the most current release of the Regulatory Compliance and Safety Information
for the Cisco CRS Carrier Routing System.
Table 25
Regulatory Compliance and Safety Information for the Cisco CRS Router
Current Revision
Publish Date
Change Summary
78-16150-10
October 2010
Added Cisco CRS-3 description. Updated “Statement
191—VCCI Class A Warning for Japan.”
RSCI for the Cisco CRS Power Distribution Unit
Provides regulatory compliance and safety information for the Cisco CRS Power Distribution
Unit (PDU).
Table 26 lists details of the most current release of the Regulatory Compliance and Safety Information
for the Cisco CRS Power Distribution Unit.
Table 26
Regulatory Compliance and Safety Information for the Cisco CRS PDU
Current Revision
Publish Date
Change Summary
78-19561-02
Sept 2010
Technical change made.
Cisco CRS Fabric Card Chassis
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS Fabric Card Chassis documents:
•
Unpacking, Moving, and Securing Guide, page 16
•
Installation Guide, page 17
•
Integrated Switch Controller Card Installation Tasks, page 17
Unpacking, Moving, and Securing Guide
Provides instructions for unpacking the Cisco CRS Fabric Card Chassis (FCC) and its components,
moving the chassis to its permanent location, and mounting and securing the chassis. The companion
document to this guide is Cisco CRS Carrier Routing System Multishelf System Site Planning Guide,
which describes how to plan and prepare your site facilities for the installation of a switch fabric card
chassis.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
16
OL-26753-01
Cisco CRS FRUs
Table 27 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card
Chassis Unpacking, Moving, and Securing Guide.
Table 27
Cisco CRS Fabric Card Chassis Unpacking, Moving, and Securing Guide
Current Revision
Publish Date
Change Summary
78-17535-10
August 2011
Updated this document with minor editorial changes.
Installation Guide
Describes how to install components into and remove them from a Fabric Card Chassis (FCC). This
installation guide does not provide background information and basic theory-of-operation for anyone
wanting to understand the Cisco CRS Carrier Routing System.
Table 28 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card
Chassis Installation Guide.
Table 28
Cisco CRS Fabric Card Chassis Installation Guide
Current Revision
Publish Date
Change Summary
OL-4603-14
February 2012
Added a note to the procedure “Powering Up and Down a
Chassis with Fixed Configuration DC Power” section.
Integrated Switch Controller Card Installation Tasks
Explains how to verify the formatting on a new switch controller card hard disk, and how to correct the
formatting if necessary.
Note
For the majority of customers, the new switch controller card hard disk is shipped with the
correct formatting and no further action is required.
Table 29 lists details of the most current release of the Cisco CRS Fabric Chassis Integrated Switch
Controller Card Installation Tasks.
Table 29
Cisco CRS Fabric Chassis Integrated Switch Controller Card Installation Tasks
Current Revision
Publish Date
Change Summary
OL-22932-01
June 2010
Initial draft of this document.
Cisco CRS FRUs
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS Field-Replaceable Unit (FRU) documents:
•
Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide, page 18
•
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide,
page 18
•
CRS-PRP Routing Processor Migration, page 19
•
Flash Disk Upgrade Tasks, page 19
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
17
Cisco CRS FRUs
Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide
Describes the various Cisco CRS Power Distribution Unit (PDU) kits, including safety warnings and
general power and grounding requirements. This document also describes how to install and remove a
PDU.
Table 30 lists details of the most current release of the Cisco CRS 3-Phase AC Power Distribution Unit
Installation Guide.
Table 30
Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide
Current Revision
Publish Date
Change Summary
OL-23476-03
July 2011
Added technical information and new procedures for installing
and removing a Cisco CRS PDU kit on a Cisco CRS fabric card
chassis. New AC cord clamp information was added. Minor
technical and editorial updates were made.
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
Describes how to upgrade a Cisco CRS-1 Carrier Routing System to a Cisco CRS-3 Carrier Routing
System and downgrade your Cisco CRS-3 Carrier Routing System back to a Cisco CRS-1 Carrier
Routing System for each chassis type:
Table 31 lists details of the most current release of the Cisco CRS-1 Carrier Routing System to Cisco
CRS-3 Carrier Routing System Migration Guide.
Table 31
Cisco CRS-1 to Cisco CRS-3 Migration Guide
Current Revision
Publish Date
Change Summary
OL-13669-03
April 2011
Adds CRS-3 multishelf support.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
18
OL-26753-01
Cisco CRS Multishelf System
CRS-PRP Routing Processor Migration
Describes three methods available to migrate from the Cisco RP-A or RP-B Routing Processor to the
new Cisco CRS-PRP Routing Processor.
Table 32 lists details of the most current release of the CRS-PRP Processor Migration.
Table 32
CRS-PRP Routing Processor Migration
Current
Revision
Publish Date
Change Summary
OL-24839-01
Initial release.
Flash Disk Upgrade Tasks
Describes managing the flash disk of the Cisco XR 12000 Series Router of the Cisco CRS-1 Router,
including resolving flash disk space shortage, upgrading a flash disk, and downgrading a flash disk.
Table 33 lists details of the most current release of the Flash Disk Upgrade Tasks.
Table 33
Flash Disk Upgrade Tasks
Current Revision
Publish Date
Change Summary
Release 3.8.1
OL-17437-01
March 2011
Added flash disk upgrade procedure for Cisco IOS XR 3.6 or
3.7 (4G FAT16) to 3.8 (4G FAT32) software.
Added flash disk downgrade procedure for Cisco IOS XR 3.8
(4G FAT32) to 3.7 or 3.6 (4G FAT16) software.
CRS DRR DIMM Memory Upgrade
Describes procedures for upgrading or replacing DIMM memory on the Cisco CRS routers.
Table 34 lists details of the most current release of the Cisco CRS Router Memory Replacement
Instructions.
Table 34
Cisco CRS Router Memory Replacement Instructions
Current Revision
Publish Date
OL-26710-01
Change Summary
Initial release.
Cisco CRS Multishelf System
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS Multishelf System documents:
•
Interconnection and Cabling Guide, page 20
•
Site Planning Guide, page 20
•
System Description, page 20
•
Installation Guide, page 21
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
19
Cisco CRS Multishelf System
Interconnection and Cabling Guide
Describes how to interconnect the switch fabric cards of the chassis that comprise the Cisco CRS Carrier
Routing System Multishelf System. This cabling guide supplements other multishelf system
documentation, such as the site planning guide, installation documents, and software documents.
Table 35 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf
System Interconnection and Cabling Guide.
Table 35
Cisco CRS Multishelf System Interconnection and Cabling Guide
Current Revision
Publish Date
Change Summary
OL-7157-09
August 2011
Added horizontal cabling descriptions and cabling plans,
corrected illustrations and tables, and removed references to
eight Fabric Card Chassis (FCC) throughout.
Site Planning Guide
Describes the basic facility requirements, such as floor space, power requirements, environmental
requirements, for the FCC and the multishelf system. This guide is intended to help you plan the sites
where the chassis will be installed. It should be used with Cisco site planning coordinators and site
inspectors, well in advance of the delivery of the chassis.
Table 36 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf
System Site Planning Guide.
Table 36
Cisco CRS Multishelf System Site Planning Guide
Current Revision
Publish Date
Change Summary
OL-7422-06
October 2011
Updated information about fixed and modular configuration
AC and DC power systems. Added new modular configuration
AC cord clamp. Technical and editorial updates were made.
System Description
Provides an overview of the multishelf system, including a detailed physical description of the FCC DC
and AC power systems, the chassis cooling system.
This document also provides an overview of the shelf controller Gigabit Ethernet card and the optical
interfaces and connection monitoring card installed in the FCC.
Table 37 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf
System Description.
Table 37
Cisco CRS Multishelf System Description
Current Revision
Publish Date
Change Summary
OL-7071-07
March 2011
Updated document to include AC modular configuration power
solution and the CRS-FCC-SFC-140 for the 140G CRS-3
system.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
20
OL-26753-01
Cisco CRS-3 Multishelf System
Installation Guide
Describes how to install components into and remove them from a Fabric Card Chassis (FCC). This
installation guide does not provide background information and basic theory-of-operation for anyone
wanting to understand the Cisco CRS Carrier Routing System.
Table 38 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card
Chassis Installation Guide.
Table 38
Cisco CRS Fabric Card Chassis Installation Guide
Current Revision
Publish Date
Change Summary
OL-4603-14
Jan 2010
Added new fiber cable trough, to the “Installing the New CRS-1
Fabric Card Chassis Fiber Guide and Cutout Assembly”
section.
Cisco CRS-3 Multishelf System
The following sections provide a description, current revision number and publication date, and a
summary of changes for the following Cisco CRS-3 Multishelf System documents:
•
Interconnection and Cabling Guide, page 20
•
Site Planning Guide, page 20
16-Slot Back-to-Back Cabling and Upgrade Guide
Describes how to interconnect the two 16-slot chassis that comprise the CRS-3 Back-to-Back System.
This cabling guide supplements other multishelf system documentation, such as the site planning guide,
installation documents, and software documents.
Table 39 lists details of the most current release of the Cisco CRS-3 Carrier Routing System 16-Slot
Back-to-Back Cabling and Upgrade Guide.
Table 39
Cisco CRS-3 Carrier Routing System 16-Slot Back-to-Back Cabling and Upgrade Guide
Current Revision
Publish Date
Change Summary
OL-26705-01
June 2012
Initial release.
8-Slot Back-to-Back Cabling and Upgrade Guide
Describes how to interconnect the two 8-slot chassis that comprise the CRS-3 Back-to-Back System.
This cabling guide supplements other multishelf system documentation, such as the site planning guide,
installation documents, and software documents.
Table 40 lists details of the most current release of the Cisco CRS-3 Carrier Routing System 8-Slot
Back-to-Back Cabling and Upgrade Guide.
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
OL-26753-01
21
Obtaining Documentation and Submitting a Service Request
Table 40
Cisco CRS-3 Carrier Routing System 8-Slot Back-to-Back Cabling and Upgrade Guide
Current Revision
Publish Date
Change Summary
OL-28921-01
May 2013
Initial release.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Cisco Carrier Routing System Hardware Documentation Revision Roadmap
22
OL-26753-01