ReadMe for Cisco Unified Communications
Manager Release 11.0(1a)SU1
Revision 1
Updated November 5, 2015
This ReadMe file discusses the following topics:
•
Introduction, page 2
•
System Requirements, page 2
•
Version and Description, page 2
•
Important Notes, page 3
•
Firmware Upgrade Issues, page 3
•
Related Documentation, page 3
•
Before You Begin, page 3
•
Installation Instructions, page 4
•
Reverting to a Previous Version, page 5
•
Caveats, page 5
•
Obtaining Documentation and Submitting a Service Request, page 11
Note
To view the release notes for previous versions of Cisco Unified Communications Manager, choose the
Cisco Unified Communications Manager version from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_release_notes_list.html
Note
Please review all sections in this document pertaining to installation before you install this Service
Update (SU). Failure to install this SU as described may result in inconsistent Cisco Unified
Communications Manager behavior.
Before you install Cisco Unified Communications Manager, Cisco recommends that you review the
“Important Notes” section on page 3 for information about issues that may affect your system.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Introduction
Introduction
This 11.0(1a)SU1 ReadMe file contains important information about installation procedures and
resolved caveats for Cisco Unified Communications Manager release 11.0(1a)SU1. This SU can be
applied to Cisco Unified Communications Manager, Business Edition 6000, Session Management Edition,
and Cisco Unity Connection.
System Requirements
The following sections comprise the system requirements for this release.
Server Support
In this release, you cannot install or run Cisco Unified Communications Manager on server hardware;
you must run these applications on virtual machines. Please refer to the “Platform requirements” section
of the Uprade Guide for Cisco Unified Communications Manager, Release 11.0(1). for additional
details:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_0_1/CUCM_BK_U97537E5_0
0_upgrade-guide-cucm_1101/Upgrade_planning.html
Uninterruptible Power Supply
Ensure that you connect each node to an uninterruptible power supply (UPS) to provide backup power
and protect your system.
Caution
Failure to connect the Cisco Unified Communication Manager nodes to a UPS may result in damage to
physical media and require a new installation of Cisco Unified CM.
Version and Description
This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified
Communications Manager 11.0(1) and 11.0(1a) along with additional changes that are specific to this
SU.
Note
You can only install this SU on Cisco Unified Communications Manager Release 6.1(4x), 6.1(5x),
7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), 9.0(x), 9.1(x), 10.0(1), 10.5(x), 11.0(1), 11.0(1a), or any
11.0(1)ES from 11.0.1.11001-1 to 11.0.1.21009-1. Upgrades from 6x through 10x need to be requested
via PUT (www.cisco.com/upgrade) to obtain the necessary license. This SU should not be installed on a
Business Edition 3000 server.
See the Compatibility Matrix for further details:
http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-call
manager/products-device-support-tables-list.html
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
2
Important Notes
Important Notes
SUs do not impact system compatibility unless specifically stated.
Cisco provides the following guidance to help you successfully upgrade Cisco Unified Communications
Manager software:
•
To minimize call-processing interruptions during the upgrade process, register all devices to servers
that are running the same version of Cisco Unified Communications Manager software. Make sure
that you register all devices to the backup Cisco Unified Communications Manager server or to the
primary Cisco Unified Communications Manager server, but not to both the backup and primary
servers.
Firmware Upgrade Issues
For all SCCP and SIP firmware upgrades from firmware release versions earlier than 8.3(3) to version
8.5(2)SR1 or greater, you must first upgrade your firmware to version 8.5(2). Once you have upgraded
to version 8.5(2), you can upgrade your IP Phone to version 8.5(2)SR1 or later. Refer to the Firmware
Versions in this Release section of this document to determine the firmware load provided in this SU.
For additional details, Firmware Upgrade Instructions, and Firmware Download locations please see:
SCCP
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_
852SR1.html#wp57602
SIP
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_
852SR1.html#wp147343
Related Documentation
To view documentation that supports Cisco Unified CM Release 11.0(x), go to:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/docguide/11_0_1/CUCM_BK_C345DB0C
_00_cucm-documentation-guide-1101.html
Before You Begin
Before you upgrade the software version of Cisco Unified Communications Manager, verify your
current software version.
To do that, open Cisco Unified Communications Manager Administration. The following information
displays:
•
Cisco Unified Communications Manager Administration System version
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
3
Installation Instructions
Installation Instructions
Note
Apply this SU to all of your Cisco Unified Communications Manager servers, beginning with the
publisher server and TFTP server.
Refer to the Uprade Guide for Cisco Unified Communications Manager, Release 11.0(1) for detailed
information about doing this upgrade:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_0_1/CUCM_BK_U97537E5_0
0_upgrade-guide-cucm_1101.html
Note
Because the 11.0.1.21900-11 build is a non-bootable ISO, it proves useful only for upgrades. You cannot use
it for new installations. You may however install with the base version 11.0.1.10000-10 or 11.0.1.20000-2
and apply 11.0.1.21900-11 as a patch during the installation.
Release 11.(x) is available in both restricted (which is the release type that has always been available from
Cisco) and unrestricted versions of software to comply with import / export restrictions to various countries. The unrestricted version is available in limited markets. Please refer to the “Export Unrestricted” section in the Upgrade Planning chapter, of the Uprade Guide for Cisco Unified Communications Manager,
Release 11.0(1) referenced above for a more detailed description.
Caution
For both restricted and unrestricted upgrades from an 8.5(x) or earlier release to a 11.(x) release, a patch
(COP file) must be applied prior to initiating the upgrade. Before you upgrade from compatible versions
of Unified CUCM, install the COP file named ciscocm.refresh_upgrade_v1.5.cop.sgn. Please refer to the
“Refresh Upgrades” section in the Upgrade overview chapter at the Uprade Guide for Cisco Unified
Communications Manager, Release 11.0(1) referenced earlier in this document for detailed installation
instructions and download location.
The file names and hash values you will use for this upgrade are:
•
UCSInstall_UCOS_11.0.1.21900-11.sgn.iso
The MD5 for the Restricted combined download is: 57bdeb7c3b540551892726466b33ae29
The SHA-512 for the Restricted combined download is:
3cc6d95e2c1a6742361795bf9e1f7aa1a6d14185e2dd301a97570b09edb5b31713de3db9099d83
7e98a8de8fb432122aa154109f0291364ad48489bedb7ec59d
Note
Once installed, UNRST releases can never be converted or upgraded to releases which support full
encryption capabilities
For the Unrestricted version:
•
UCSInstall_UCOS_UNRST_11.0.1.21900-11.sgn.iso
The MD5 for the Unrestricted combined download is: 41bbe768dbaac02a164e119544715587
The SHA-512 for the Unestricted combined download is:
391f1929e6af840f82c2169549a7b9da48a4e5d1a7f9566be228d6a007373f9d71008783c2ed116
00f369e075843c3c22ecc794bf8818108076f45d3e64e703b
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
4
Reverting to a Previous Version
Reverting to a Previous Version
Note
Revert the SU on all servers in the cluster in the same order in which you performed the installation.
Refer to the “Switch to previous version” section in the Upgrade Tasks chapter at Uprade Guide for
Cisco Unified Communications Manager, Release 11.0(1) for detailed instructions on “Reverting to a
Previous Version.”
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_0_1/CUCM_BK_U97537E5_
00_upgrade-guide-cucm_1101/Upgrade_tasks.html
Caveats
Caveats describe unexpected behavior on a Cisco Unified Communications server. The following
sections contain lists and descriptions of resolved and open caveats in this release.
Resolved Caveats
Resolved Caveats for Cisco Unified Communications Manager Release 11.0(1a)SU1 describes possible
unexpected behaviors in Cisco Unified Communications Manager Release 11.0(1) or 11.0(1a).
Resolved Caveats for Cisco Unified Communications Manager Release 11.0(1a)SU1
The following information comprises unexpected behavior that is addressed by this SU of Cisco Unified
Communications Manager.
Resolved CUCM Caveats in 11.0(1a)SU1
CSCuu63775 :
CSCuu81112 :
CSCuu24422 :
CSCuu65414 :
CSCuv48314 :
CSCuw36022 :
CSCuv17409 :
CSCuv80023 :
CSCuv86160 :
CSCuw02911 :
CSCuo58633 :
CSCuu49985 :
CSCuu99738 :
CSCuv07151 :
CSCuv82528 :
CSCuw22277 :
CSCus21121 :
CSCuu49260 :
CCM core due to allocation of memory with two extra bytes
CUCM upgrade to 10.5.1 fails if timezone set to Riyadh
IM&P repeatedly imports tomcat trust certificate
Interwork External Multicast MOH source to Unicast MOH
Invalid DN in database when certificate common name contains doublequote
UDS acts as case sensitive for user id.
Bulk loading 300 users fails to provision for certain users.
Downloaded packet capture data cannot be decrypted
Not able to erase CTIManager Logs on updating Trace Output Settings
De registration of endpoints using Mobility feature with MRA Devices
Route Plan Report shows Unmapped Exception error
TSP 8.5(1.15) Allows non admin users to change TAPI password
Phones reboot after uploading MultiSan Cert where case doesn't match CSR
Emport/export issue when BLF is configured on the phones
Translation Pattern Validation errors on valid patterns
cp mediacontrol timing issue passing OLC ack to SIP process
Corporate Directory entry order is not alphabetical
Bulk Admin Tool does not produce correct vendorConfig XML
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
5
Caveats
CSCuv01905 :
CSCuv26281 :
CSCuv34080 :
CSCuv57765 :
CSCuv65202 :
CSCuw17550 :
CSCut96327 :
CSCuv54501 :
CSCuv72326 :
CSCuv83074 :
CSCuw21441 :
CSCsy90529 :
CSCuu44936 :
CSCuu85257 :
CSCuv17758 :
CSCuv19736 :
CSCuv24353 :
CSCuv33290 :
CSCuv39301 :
CSCuv51764 :
CSCuv51863 :
CSCuv67610 :
CSCuv73283 :
CSCuv89821 :
CSCuv93165 :
CSCuw12991 :
selfcare - Wrong display direction (right to left) for es ar locale
Evaluation of ciscocm for OpenSSL July 2015 vulnerability
CUCM / SME not passing properly the ptime for G729
LDAP Connection Timeout can't be changed from 5 sec it won't take efect
Content ID sent by Communications Manager is not FRC2392 compliant
Access denied error CUCM 11.X on route group config page
ConferenceNow couldn't be synchronized when MOH value is set to None
CCM core dump when phone processing speed dial configuration
getPhone gives error sporadically if ikdevice_primaryphone is not null
Conference and MoH doesn't work if configured with server name
CAR Auto Purge MAX age below 34 days causes high memory usage in 11.0.1
CDR Load status shows Unsuccessful if it is interrupted by DRS backup
Line side config pulls over during device copy
After chaining two secure conferences,the final call is a non secure
CCM exhbits "IntentionalAbort" due to CCMDB mutex held by DMPropagation
Post Migration of CUCM DRF Backups fail
CUCM - Prefixes 00 when adding Directory Number Range with \+.
Fix usage of SSL in JAVA to address poodle vulnerability DirSync
CUCM migration to 10.x fails using PCD 11.0.1.10000 6
RTMT log collection fails for CUCM for AEST or AWST timezone
CUCM 10.5 & 11.0 RTMT - analyze call path error
Video set to 384 and Immersive bandwidth set to 2147483647
PacketCapture fails in downloading of key file in FIPs mode
Failed to download trace file from UCM with DimeGetFileService
HAProxy does not bind IPv6 address in 11.0
11.0(1a)su1 upgrade rules to prevent install over ineligible ES's
Resolved Cisco Unity Connection Caveats in 11.0(1a)SU1
CSCuv93175 :
CSCuw44868 :
CSCup92741 :
CSCuw53890 :
CSCtr50458 :
CSCuu32724 :
CSCuu40079 :
CSCuu40352 :
CSCuu63531 :
CSCuu68923 :
CSCuv11275 :
CSCuv16942 :
CSCuu85659 :
CSCuu89716 :
CSCuv04411 :
CSCuv23752 :
CSCuv31252 :
CSCuv34502 :
CSCuv63824 :
HTML Notification image not displayed when Alias created with %20
Switch version failed with KeyError 'MessageType'
Unity Connection Reflected Cross Site Scripting
Upgrade JDK for 11.0.1su1 Release
CuMixer Core Dumps during SRTP Decryption
Secure messages can't be played from relay address when recp is remote
Switch version failing due to constraint violation in tbl_timezone
Transfer loop after upgrade to CUC 10.5.2
Unity connection sending incorrect cseq in CANCEL messages
UC 10.5.1 - Corporate Email Fails to Sync When LDAP is Updated
Message is not marked read after deleting it during play through VVM
Re evaluate CuCsMgr Lock() Mechanism Implemented during previous fix.
Affected users during restore operation not displayed correctly
Notification mail do not reflect correct log path while restore fails.
Cannot edit extension for imported ldap users
Event type getting set to "All voice messages" when changing template
Upload of large voicemail wav file do not work on WebInbox in Firefox
'Max Message Count' field gets change automatically to '0' on CPCA
Multiple SQL injection vulnerabilities in Unity
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
6
Caveats
CSCuv73956 : Sender display name is junk characters for non unity subscriber
CSCuv82876 : SSL jetty is not enabled using CLI
Resolved CUCM Caveats in 11.0(2.21009-1); base ES for 11.0(1a)SU1
CSCuv99604 :
CSCuv82344 :
CSCuv44142 :
CSCuv29584 :
CSCuv23626 :
CSCuu47104 :
CSCuv76159 :
CSCuv64658 :
CSCuv19482 :
CSCuv13482 :
CSCuv79938 :
CSCuv57329 :
CSCuu71239 :
CSCuv19723 :
CSCuv62722 :
CSCuv52584 :
CSCuv33186 :
CSCuu00543 :
CSCuv02113 :
CSCuv64099 :
CSCuv52183 :
CSCuv40352 :
CSCuv34143 :
CSCuv22026 :
CSCuv21285 :
CSCuv06688 :
CSCuu74218 :
CSCuu69291 :
CSCuu67940 :
CSCuu63627 :
CSCuu39790 :
CSCuu59477 :
CSCuu76094 :
CSCuv29427 :
CSCuv13339 :
CSCuv02601 :
CSCuu58085 :
CSCur09534 :
CSCuv23627 :
CSCuu46978 :
CSCuv17829 :
CSCuv02929 :
CSCuv01313 :
9.4(2)SR2 SIP loads and support files for 8961/9951/9971 IP Phones
Add support for Extension Mobility Size Safe feature to 8845 phone
CVE-2015-4620abortDoS due to uninitialized value use in isselfsigned()
call rejected after receiving 422 response, not sending new invite
Unable to export large number of data in BAT.
Call manager service crashes due to issues in reaching IM&P server
UCCE Client Login Error 12005 with second line shared
Unable to restore if security password has changed
SIP 200 Ok with no SDP leaves SIP cdpc in reqOfferSent state
U1-upgrade is failing with "Critical error"
Adding DX series 10.2.5 QED parameters
ILS 10.5 cluster does not insert URIs received from 9.1.2 Cluster
addPhone request failes when ownerUserName has single character
Proxy TFTP return 503 service unavailable
extensionsInfo, primaryExtension & ipccExtension do not work properly
GK entry in device table is getting associated with common phone profile
updateGatewaySccpEndpoints-throws error if request in based on UUID
Fax call from H.323 to SIP with MTP fails
BAT issue after exporting UDP, it skips Busy Lamp field 1
9.4(1)SR2 SCCP/SIP firmware files for 6921/41/61/45 IP Phones
SSL_ERROR_SSL handling in SdlSSLTCPConnection
Hunt Pilot not forwarding call when members are unregistered
SIPInterface leak in CCM for T38 fax to audio fallback calls.
CUCM does not forward call according to CFNC for calls using CTI RP/port
Recording Tone is always played for SNR calls
CUCM drops video-call after session refresh
GetGateway request error
CUCM will not handle IPV6 m line for Fax
CUCM sending UPDATE after 183 session progress
URI dialing with "Apostrophe (') fails.
DNA does not provide full call flow for E.164 patterns
SHA1 in CTL file with etoken is wrong if DER cert exceeds 2048 bytes
ATA1901.2.1 QED/Firmware DevPack check in
2911.5.0.98000-101 cc_mainline ( CCM ) Build Status Is FAILED
Port config problem ISR4351 SCCP
SIP Normalization doesn't work for 3rd Party SIP Phones also with UDP.
PMR 32360 227 000Database replication does not complete due to 195.
Utils dbreplication status should not proceed if there is no good Sub
Check in Firmware of 8845/8865 in 10.3.2 release
CUCM cores while handling CcInfoInd signal in stop_indication state
Upgrade rules to prevent 11.0(1) Respins from installing over ES's
Stunnel Multiple Vulnerabilities (CVE-2013-1762) for CUCM
DVOR over edge needs a BYE from CUCM if call is not anchored
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
7
Caveats
CSCuu92481 :
CSCuu77145 :
CSCuu64781 :
CSCuu58142 :
CSCuu21545 :
Cisco Unified Communications Manager Multiple CUPS Vulnerabilities
Similarity on CUP and CUCM IP causing ILS replication problems.
MTP leaking DTMF digits RFC2833 to OOB for SIP to CTI calls
CallsInProgress leaks when Incoming SNRD call is Rejected
User Ctrl VMA call is not working when DTMF signaling is set 'No Pref'
Resolved Cisco Unity Connection Caveats in 11.0(1)ES9; base ES for 11.0(1a)SU1
CSCuv46838 :
CSCuv23241 :
CSCuu97867 :
CSCuv32098 :
CSCuv21270 :
Unable to add multiple comma-seperated SMTP addresses via VMrest API
Media Master support on Java 1.8
Ldap Integrate/Do not integrate do not work via CUPI
Core on Secondary UC Server with 11.0.1.10000-10 installed
Improper AXL Message While connecting to latest CUC
Open Caveats
Open Caveats for Cisco Unified Communications Manager Release 11.0(1a)SU1 describes a few of the
possible unexpected behaviors still remaining in Cisco Unified Communications Manager Release
11.0(1a)SU1. For a complete list of open caveats please access the bug toolkit located at:
https://tools.cisco.com/bugsearch?referring_site=btk
Tip
For more information about an individual defect, click the associated Identifier in the to access the online
record for that defect, including workarounds.
Open Caveats
CSCux01837 : TCT device does not take -Cisco Support Field- settings
CSCuu34247 : FA mid call features are failing over SIP ICT w/ No Prefer DTM
CSCuh74114 : U1 failed with "Unable to install patch(s)" message
Firmware / Device Loads
SUs contain firmware loads, however, Cisco recommends that you always download the latest firmware load
from the Voice Software Download Center.
Phone Firmware
To download phone firmware, follow this procedure:
Step 1 Go http://www.cisco.com/cisco/software/navigator.html?mdfid=278875240&i=rp
Step 2 Select Collaboration Endpoints in the center column
Step 3 Select IP Phones in the right most column
Step 4 Select the desired phone series in the right most column
Step 5 Select the desired phone model in the right most column
Step 6 From the options that display, select the desired software type for your deployment.
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
8
Caveats
Device Packages
Firmware upgrades not explicitly addressed in the Phone Firmware section can be obtained via Dev Packs.
To download Dev Packs for this release, follow this procedure:
Step 1 Go http://www.cisco.com/cisco/software/navigator.html?mdfid=278875240&i=rp
Step 2 Select Call Control in the right most column
Step 3 Select Unified Communications Manager (CallManager) in the right most column
Step 4 Select Unified Communications Manager Version 11.0 in the right most column
Step 5 From the options that display, select Unified Communications Manager/CallManager Device
Packages
Step 6 From the options that display, select the desired release for your deployment.
Firmware Versions in this Release
Device type
Load name
Version
-------------------------------- ------------------------------------- ---------3905
3911_3951-sip
6608
6608cfb
6608mtp
6624
6901-sccp
6901-sip
6911-sccp
6911-sip
6945-SCCP
6945-SIP
69xx-SCCP
69xx-SIP
78xx
7902
7905
7905
7910
7911_7906-sccp
7911_7906-sip
7912
7912
7914-sccp
7915
7916
7920-sccp
7921-sccp
7925-sccp
3905.9-4-1SR1-3
3911_3951-sip.8-1-4a
6608-4.0.0.32-mgcp
6608cfb-4.0.0.03-sccp
6608mtp-4.0.0.06-sccp
6624-4.0.0.13-mgcp
6901-sccp.9-3-1-SR2-2
6901-sip.9-3-1-SR2-3
6911-sccp.9-3-1-SR2-3
6911-sip.9-3-1-SR2-4
6945-SCCP-9-4-1-3SR2
6945-SIP-9-4-1-3SR2
69xx-SCCP-9-4-1-3SR2
69xx-SIP-9-4-1-3SR2
78xx.10-3-1-12
7902-8.0.2-sccp
7905-8.0.1.1-sip
7905-8.0.3-sccp
7910-5.0.7.0-sccp
7911_7906-sccp.9-4-2SR1-1
7911_7906-sip.9-4-2SR1-1
7912-8.0.1.1-sip
7912-8.0.4-sccp
7914-sccp.5-0-4
7915.1-0-4-2
7916.1-0-4-2
7920-sccp.3-0-2
7921-sccp.1-4-6-3
7925-sccp.1-4-7-3.k3
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
9
9.4(1SR1.3)
8.1(4.0)
4.0(0.32)
4.0(0.3)
4.0(0.6)
4.0(0.13)
9.3(1.0)
9.3(1.0)
9.3(1.0)
9.3(1.0)
9.4(1.3)
9.4(1.3)
9.4(1.3)
9.4(1.3)
10.3(1.12)
8.0(2.0)
8.0(1.1)
8.0(3.0)
5.0(7.0)
9.4(2SR1.1)
9.4(2SR1.1)
8.0(1.1)
8.0(4.0)
5.0(4.0)
1.0(4.2)
1.0(4.2)
3.0(2.0)
1.4(6.3)
1.4(7.3)
Caveats
7926-sccp
7931-sccp
7931-sip
7935-sccp
7936-sccp
7937
7937
7940-7960
7940-7960-sccp
7941_7961-sccp
7941_7961-sip
7942_7962-sccp
7942_7962-sip
7945_7965-sccp
7945_7965-sip
7970_7971-sccp
7970_7971-sip
7975-sccp
7975-sip
7985
8831-sip
8845_65-sip
88xx-sip
894x-sccp
894x-sip
8961
9951
9971
ata
ata187
ata190
7926-sccp.1-4-7-3.k3
7931-sccp.9-4-2SR1-1
7931-sip.9-4-2SR1-1
7935-sccp.3-2-19
7936-sccp.3-3-21
7937-1-4-4-SCCP
7937-1-4-5-7-SCCP
7940-7960-8.12.00-sip
7940-7960-sccp.8-1-2SR2
7941_7961-sccp.9-4-2SR1-1
7941_7961-sip.9-4-2SR1-1
7942_7962-sccp.9-4-2SR1-1
7942_7962-sip.9-4-2SR1-1
7945_7965-sccp.9-4-2SR1-1
7945_7965-sip.9-4-2SR1-1
7970_7971-sccp.9-4-2SR1-1
7970_7971-sip.9-4-2SR1-1
7975-sccp.9-4-2SR1-1
7975-sip.9-4-2SR1-1
7985-4-1-7-0-sccp
8831-sip.10-3-1-16
8845_65-sip.10-3-2-16.k3
88xx-sip.10-3-1-20
894x-sccp.9-4-2SR1-2
894x-sip.9-4-2SR1-2
8961.9-4-2SR2-2
9951.9-4-2SR2-2
9971.9-4-2SR2-2
ata-3.2.4-sccp
ata187.9-2-3-1
ata190.1-2-1-004
Cisco Unity Connection RPMs
CCM Reference Build: 11.0.1.21900-11
Cisco Unity RPMs:
BuiltRPMsList
NRec-10.2.6-14289.x86_64.rpm
NRec-en-US-10.0.0-10.0.0-12059.i686-linux.rpm
NSS-6.2.7-14290.i686.rpm
Nuance-Common-10.2.7-14289.i686.rpm
Nuance-Common64-10.2.7-14289.x86_64.rpm
Nuance-NRS64-10.2.7-14289.x86_64.rpm
Nuance-OAM-10.2.7-14289.i686.rpm
cuc-11.0.1.21900-708.i386.rpm
cuc-base-11.0.1.21900-708.i386.rpm
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
10
1.4(7.3)
9.4(2SR1.1)
9.4(2SR1.1)
3.2(19.0)
3.3(21.0)
1.4(4.0)
1.4(5.7)
8.12(00.0)
8.1(2SR2.0)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
9.4(2SR1.1)
4.1(7.0)
10.3(1.16)
10.3(2.16)
10.3(1.20)
9.4(2SR1.2)
9.4(2SR1.2)
9.4(2SR2.2)
9.4(2SR2.2)
9.4(2SR2.2)
3.2(4.0)
9.2(3.1)
1.2(1.45)
Obtaining Documentation and Submitting a Service Request
cuc-bin-11.0.1.21900-708.i386.rpm
cuc-etc-11.0.1.21900-708.i386.rpm
cuc-install-11.0.1.21900-708.i386.rpm
cuc-jetty-11.0.1.21900-708.i386.rpm
cuc-languagepack-enu-11.0.1.21900-708.i386.rpm
cuc-lib-ext-11.0.1.21900-708.i386.rpm
cuc-lib-jar-11.0.1.21900-708.i386.rpm
cuc-lib-so-11.0.1.21900-708.i386.rpm
cuc-links-11.0.1.21900-708.i386.rpm
cuc-productid-11.0.1.21900-708.i386.rpm
cuc-python-11.0.1.21900-708.i386.rpm
cuc-python-site-11.0.1.21900-708.i386.rpm
cuc-selinux-11.0.1.21900-708.i386.rpm
cuc-share-11.0.1.21900-708.i386.rpm
nve-api-6.0.2-14049.i686.rpm
nve-en-US-Samantha-bet1-6.0.1-13043.i686.rpm
openssl097a-0.9.7a-9.el5_4.2.i386.rpm
Plug-In Report
-----------------------------------------cm-taps-plugin-7.0.2.0-1.i386.rpm
cm-axlsqltoolkit-plugin-1.1.0.0-1.i386.rpm
cm-tsp-plugin-11.0.1.2-0.i386.rpm
cm-ctlc-plugin-6.0.0.1-1.i386.rpm
cm-jtapi-plugin-11.0.1.10000-3.i386.rpm
cm-rtmt-client-plugin-11.0.0.0-0.i386.rpm
TZDATA file
------------------------------------------
Version
platform-tzdata-2015a-1.el6.i386.rpm
2015-a
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
11
Obtaining Documentation and Submitting a Service Request
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks
can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only.
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2015 Cisco Systems, Inc. All rights reserved.
ReadMe for Cisco Unified Communications Manager Release 11.0(1a)SU1
12