Activation
1. Once the device boots up, use the LCD menu to view the Internet status to verify that the gateway is connected to the Internet
as follows:
Quick Reference Guide
• Wave your hand over the LCD.
• Tap the up or down arrows repeatedly until the Internet Status icon is highlighted.
• Tap the right arrow. The Internet status page appears.
Cisco Model TES301 IP Managed Services
Home Gateway
The top panel of your TES301 provides a liquid crystal display
(LCD) screen for easy setup and configuration. Use the touch
sensitive arrow keys to navigate through the menu options. The
top panel also provides light-emitting diode (LED) status icons
that indicate the operational state of your gateway.
1 Power (Green/Red)—The Power LED lights up when the
TES301 is powered on. The LED becomes red during a
malfunction.
2. Tap the left arrow to exit this view.
3. To verify that your phone connection is set up properly, verify that the blue LED light on the top panel of the gateway is lit.
4. Follow the instructions in your owner’s manual for your computer or other wireless device to activate the wireless connection.
2 WPS Touch-Sensitive Key (Amber)—Touch for 3 seconds to
initiate pairing with Wi-Fi devices.
Note: A wireless connection requires a wireless-enabled device with an 802.11b/g/n wireless network adapter installed.
ON/OFF
PHONE 2
PHONE 1
INTERNET
4
3 ETHERNET
2
1
3 LCD with Touch-Sensitive Keys—The LCD screen lights
up with the wave of your hand to display menu options
for common setup and configuration functions. The touch
sensitive keys, indicated by the up, down, left, and right
arrows, help you navigate through the menus.
USB
RESET
12V DC IN
Phone
PC
1
4 Phone 1-2 (Blue)—The LED lights up blue when it is
registered with the SIP server. It flashes to indicate voice mail
messages have been received.
2
Safety First
802.11b/g/n
Wireless
Laptop
1 2
SIG
HD
WIRELESS
TEL1
SETUP
4
LINK
3
2
T14939
TEL2
ETHERNET
ONLINE
US
DS
REC
1
4
IPTV
Set-Top Box
Modem
POWER
3
Your gateway comes with a CD that contains a user guide with
important safety information. Before installing this gateway, read
the Important Safety Instructions provided in the user guide.
EPC2425
T14910
5. You are now ready to configure your gateway. Refer to the Cisco Model TES301 IP Managed Services Home Gateway User
Guide for instructions to complete the setup of your gateway.
Americas Headquarters
Cisco Systems, Inc.
San Jose, CA
Asia Pacific Headquarters
Cisco Systems (USA) Pte. Ltd.
Singapore
Europe Headquarters
Cisco Systems International BV Amsterdam,
The Netherlands
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at
www.cisco.com/go/trademarks. Wi-Fi Protected Setup is a trademark of the Wi-Fi Alliance. Other third party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1009R)
April 2011
Part Number 4038300 Rev A
Installation
5. (Optional) You can connect the PHONE 2 port to a second analog telephone or a fax machine.
1. Make sure the power switch is in the Off position. Power down all devices that you will connect to the gateway.
2. Insert a standard RJ-45 Ethernet cable (included) into the INTERNET port on the gateway and connect the other end to your
broadband network termination device, such as a modem, router, GPON, or similar device.
Note: The illustrations in this guide show a modem connection as an example.
ON/OFF
PHONE 2
PHONE 1
INTERNET
4
3 ETHERNET
2
1
Note: To prevent an invalid connection to the circuit-switched Telco network, do not connect an RJ-11 telephone cable from the
PHONE 1 (or PHONE 2) port on the TES301 to a telephone wall jack.
6. (Optional) Connect additional PCs, or other Ethernet devices, such as a set-top, to an ETHERNET port using a standard RJ-45
Ethernet cable.
USB
ON/OFF
PHONE 2
PHONE 1
INTERNET
4
3 ETHERNET
2
1
USB
RESET
RESET
12V DC IN
12V DC IN
Phone
WIRELESS
TEL2
TEL1
PC
SETUP
US
ONLINE
ETHERNET
4
LINK
3
2
1
DS
POWER
Modem
EPC2425
T14905
3. Insert a standard RJ-45 Ethernet cable into an Ethernet port on the gateway and connect the other end to your PC.
1
IPTV
Set-Top Box
Modem
USB
POWER
RESET
WIRELESS
2
TEL2
3 ETHERNET
TEL1
4
ETHERNET
INTERNET
ONLINE
PHONE 1
US
PHONE 2
DS
ON/OFF
SIG
HD
SETUP
4
LINK
3
2
1
REC
T14908
EPC2425
12V DC IN
Note: The power adapter that shipped with your device may differ from the illustration below.
WIRELESS
TEL1
SETUP
LINK
3
4
TEL2
ETHERNET
ONLINE
US
7. Connect the included power adapter to the TES301 power port, and then plug the power adapter into an electrical outlet.
2
DS
1
POWER
Modem
EPC2425
PC
ON/OFF
PHONE 2
PHONE 1
INTERNET
4
3 ETHERNET
2
1
USB
RESET
12V DC IN
T14906
4. Insert a standard RJ-11 telephone cable into the PHONE 1 port and connect the other end to an analog telephone, cordless
phone base station, or fax machine.
ON/OFF
PHONE 2
PHONE 1
INTERNET
4
3 ETHERNET
2
1
USB
T14909
RESET
12V DC IN
8. Use the power switch on the back panel to power on the TES301. The power LED on the front panel will light up as soon as
the device powers on. The LCD will light up with a message that the device is booting up.
Phone
PC
WIRELESS
TEL1
SETUP
LINK
3
4
TEL2
ETHERNET
2
1
ONLINE
US
DS
POWER
Modem
EPC2425
T14907