Quick Install Guide for
Cisco LCD Professional Series Displays
Including all 100L, 110L, and 110Q models
Revised: February 20, 2011
Tip
This guide might be updated at any time and for any reason. The newest revision is available on
Cisco.com. If your copy of this guide is more than a few days old, we recommend that you check
Cisco.com for any newer version.
zhT
‫ݺ‬ଚ‫ױ‬౨ᙟழ‫ޓ‬ᄅ‫ם֫ء‬Δ່ᄅठ‫ء‬ᓮ೶‫!ە‬Djtdp/dpnΖ!
zhS
៥Ӏৃ㛑䱣ᯊ᳈ᮄᴀ᠟‫ˈݠ‬᳔ᮄ⠜ᴀ䇋খ㗗&LVFRFRPDŽ
JA
情報をあなたの印刷されたマニュアルでタイムリーです
か？ Cisco.comを確認してください。
KO
㢨⬘⎨㛰㡴ⷴᷱ╔㍌㢼㏩⏼␘.㺐㐔ᵐ㥉⸬㡴Cisco.com㜄㉐䞉㢬䚌㐡㐐㟈.
You can help us to improve this document.
Please submit review comments from the Feedback form for this document on Cisco.com.
zhT
ᦟ०൞ऱრߠࡉ֘墅Ζᓮࠌ‫!ش‬Djtdp/dpn!Ղऱ֘墅।Ζ‫ݺ‬ଚ‫ط‬಑ऱტ᝔൞ऱრߠΖ
zhS
⃶䖢ᙼⱘᛣ㾕੠ড作DŽ䇋Փ⫼&LVFRFRPϞⱘড作㸼DŽ៥Ӏ⬅㹋ⱘᛳ䇶ᙼⱘᛣ㾕DŽ
JA
あなたは賞賛したい情報や、このマニュアルを批判する
か？Cisco.com上のフィードバックフォームを使用してく
ださい。我々は、尊重し、ご意見を感謝しています。
KO
㢨⬘⎨㛰㡸ᵐ㉔䚌⏈⒤␭㐔㢌⓸㟴㢨䙸㟈䚝⏼␘.Cisco.com㜄㢼⏈䙰☐ⵥ㛅㐑㡸㇠㟝䚨
㨰㐡㐐㟈.Ỵ䚌㢌㢌ᷠ㡸㦨㩅䚌⮤ᵄ㇠☐⫱⏼␘.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Table of Contents
Table of Contents
•
Important Safety Warnings, page 2
•
Plan and Prepare, page 4
•
Physical Interfaces, page 10
•
Connect a DMP, page 11
•
Connect Speakers, page 13
•
Connect a Stand, page 15
•
Reference, page 20
•
Learn More, page 21
Important Safety Warnings
Do not mishandle this product, its accessories, or its packaging. Otherwise, you might risk fire,
personal injury, electric shocks, or other preventable hazards.
Warning
Keep away from heat sources, including heaters and candles.
Keep packing material, including vinyl and anti-moisture material, out of the reach of children.
Never drop this product, handle it roughly, or allow it to fall.
Transport, install, use, clean, and maintain this product according to Cisco instructions.
OFF
Before moving this product, turn its power Off and disconnect all cables.
• The fluorescent lamp in this product contains a small amount of mercury.
• Do not dispose of this product with general household waste.
• Dispose of this product in accordance with your local regulations.
Quick Install Guide for Cisco LCD Professional Series Displays
2
78-19168-01 -C0
Important Safety Warnings
Breakable
Do Not Drop
zhT
683:5794
zhS
JA 壊れやすい。削除しないでください。
KO ᾜ㫼㍌㢼㡰⏼⛜㛨⡜⫠㫴⫼㐡㐐㟈.
Do Not Allow to Fall
zhT
+(*)'
zhS
JA 落ちるようにしてください。
KO ὤ㟬㢨㫴⫼㐡㐐㟈.
Avoid Impact
zhT 避免撞擊。
zhS 避免撞
JA 避け影響。
KO 㻝ᷝ㡸㨰㫴⫼㐡㐐㟈.
Do Not Stack or Clamp
zhT
<?@>=BA;
zhS
JA スタックまたはクランプしないでください。
KO 㤵㣠䚌㫴⫼㐡㐐㟈.
Keep Upright
zhT 保持直立。
zhS 保持直立。
JA 直立してください。
KO ❅ⵈ⦐⸨Ḵ䚝⏼␘.
Heavy
Avoid Injury
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
3
Plan and Prepare
Plan and Prepare
•
Unpack, page 4
•
Check Package Contents, page 5
•
Start Keeping Records Now, page 5
•
Qualify a Location for Setup, page 5
•
Environmental Conditions, page 7
•
Rotation, page 8
Unpack
Quick Install Guide for Cisco LCD Professional Series Displays
4
78-19168-01 -C0
Plan and Prepare
Check Package Contents
The shipping container that you received contains your equipment product kit. The kit contains a printed
packing list. Compare the packing list to the kit. The packing list tells you how to request a replacement
if anything is missing, defective, or damaged.
Note
Do not discard or recycle the printed packing list. You will use it.
zhT 不要丟棄或回收打印裝箱單。你會使用它。
zhS 不要
JA 破棄または印刷された梱包リストを再利用しないでくださ
い。あなたはそれを使用します。
KO 㥐ḩ═䔠㣙⯝⦑㡸ⶸ⫠ᶤ⇌㣠䞐㟝䚌㫴⫼㐡㐐㟈.
Start Keeping Records Now
Before you recycle or discard the shipping container that you received, examine it. Then, write down or
photograph any important information that is:
•
Printed directly on the shipping container.
•
Printed on any material that is affixed or fastened to the shipping container.
This information might help you to obtain warranty service, replacement parts, or technical support if
you ever need them.
zhT 檢
zhS JA 調べ輸送用コンテナ。写真のラベルとマーキング。後でこ
の情報が必要な場合があります。
KO ㉔㤵═䀜䊀㢨∼⪰ⶸ⫠ᶤ⇌㣠䞐㟝䚌ὤ㤸㜄㩅㟈䚐㥉⸨ᴴ㢼␘⮨㤵㛨⋇ᶤ⇌,㇠㫸㡸㵁ὤ
ⵈ⣁⏼␘.㢨ᶷ㡴⇌㩅㜄㉐⽸㏘⇌⺴䖼㍌⫠,ὤ㍔㫴㠄㡸ⵏ⏈⒤⓸㟴㢨╔㍌⓸㢼㏩⏼␘.
Qualify a Location for Setup
This is a Class B ( B) product. You can use it inside or near a small office or residence.
Install and use this equipment indoors only.
zhT
安裝和使用該設備只能在室內。
zhS
安装和使用
JA
インストールにのみ、この機器の室内を使用しています。
KO
㐘⇨㜄㉐⬀㉘㾌䚌㐐Ḕ㇠㟝ⵈ⣁⏼␘.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
5
Plan and Prepare
Install and use this equipment where its power cord can reach an AC electrical socket.
Do not substitute a longer power cord.
Do not use an extension cord.
🔟
zhT
!!
!
zhS
!
!
JA
インストールとその電源コードがコンセントのACを達す
ることができるこの装置を使用しています。長い電源コー
ドを代用しないでください。延長コードを使用しないでく
ださい。
KO
㤸㠄䂈☐ᴴ㤸ὤ㋀䁇㜄⓸␠䚔㍌㢼⏈㠸㾌㜄㉐㉘㾌ⵃ㇠㟝䚌㐐ὤⵈ⣁⏼␘.
Ὠ㤸㠄䂈☐⦐␴㷨䚌㫴⫼㐡㐐㟈.
㜤㣙䂈☐⪰㇠㟝䚌㫴⫼㐡㐐㟈.
A datasheet on Cisco.com states what AC voltage range this equipment supports. Within the supported range,
choose a standard voltage for your locale.
zhT
"
#
$!#
zhS
&LVFRFRP㔥キϞ䰜䗄њᴀ䆒໛ᬃᣕⱘѸ⌕⬉य़㣗ೈDŽ
ᬃᣕⱘ㣗ೈˈ䇋䗝ᢽԴऎඳⱘᷛ‫⬉ޚ‬य़DŽ
JA
Cisco.comの状態に関するデータシートは、この装置がサ
ポートされているAC電圧範囲。サポートされている範囲
内では、ロケールの標準的な電圧を選択してください。
KO
Cisco.com㜄㢼⏈⒤㢨䉤㐐䏬㜄㉐㢨㣙⽸ᴴ㫴㠄䚌⏈Ẅ⪌㤸㚉ⷈ㠸⪰䞉㢬䚔㍌㢼㏩⏼␘.
㫴㠄䚌⏈ⷈ㠸⇨㜄㉐䖐㨴㤸㚉㡸㉔䈑䚌㐐ὤⵈ⣁⏼␘.
Quick Install Guide for Cisco LCD Professional Series Displays
6
78-19168-01 -C0
Plan and Prepare
Environmental Conditions
Table 1
Environmental Tolerance Ranges
Measurable Condition
Device State
Min.
Max.
Temperature (Ambient)
ON
On (Operating — long-term or short-term)
32°F (0°C)
104°F (40°C)
– 4°F (–20°C)
140°F (60°C)
OFF
Off (Nonoperating or storage)
Relative Humidity (Noncondensing; Ambient)
ON
On (Operating — long-term or short-term
10%
80%
5%
90%
OFF
Off (Nonoperating or storage)
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
7
Plan and Prepare
Rotation
You can mount your LCD display at 0° or 90°. Do not use any other angle!
270
180
0
90
Electrical Specifications
32
42
47
55
Rated Voltage
•
AC 100-240V ~
50/60 Hz
1.5A
•
AC 100-240V ~
50/60 Hz
2.3A
•
AC 100-240V ~
50/60 Hz
3.0A
•
AC 100-240V ~
50/60 Hz
3.0A
Typical Power
Consumption
•
On: 145W
Sleep: ≤ 4W
Off: ≤1W
•
On: 200W
Sleep: ≤ 2W
Off: ≤0.5W
•
On: 260W
Sleep: ≤ 2W
Off: ≤0.5W
•
On: 350W
Sleep: ≤ 1W
Off: ≤1W
Quick Install Guide for Cisco LCD Professional Series Displays
8
78-19168-01 -C0
Plan and Prepare
Dimensions and Weight
Measurements are approximate and subject to change without notice.
32-inch units
W
H
D
Display
42-inch units
31.61 in
80.29 cm
19.41 in
49.30 cm
03.93 in
09.98 cm
W
H
D
31.70 lb
Speakers
W
H
D
31.61 in
80.29 cm
21.26 in
54.00 cm
07.58 in
96.70 cm
22.03 in
55.98 cm
04.87 in
12.37 cm
47-inch units
W
H
D
41.00 lb
14.38 kg
Stand
38.07 in
H
D
38.07 in
96.70 cm
24.99 in
63.50 cm
10.18 in
24.59 in
62.46 cm
04.83 in
12.29 cm
H
D
H
D
42.50 in
107.95 cm
27.46 in
69.77 cm
11.74 in
4.80 in
12.18 cm
26.40 kg
W
H
D
48.84 in
124.06 cm
30.44 in
77.32 cm
15.95 in
19.25 cm
Speakers
37.08 lb
43.92 lb
52.02 lb
85.1 lb
Stand
16.82 kg
19.92 kg
23.60 kg
38.70 kg
W
H
D
Display
31.61 in
80.29 cm
19.41 in
49.30 cm
03.93 in
09.98 cm
W
H
D
38.07 in
96.70 cm
22.03 in
55.98 cm
04.87 in
12.37 cm
W
H
D
29.83 cm
28.01 in
71.14 cm
58.10 lb
22.20 kg
W
48.84 in
124.06 cm
Display
25.86 cm
107.95 cm
55-inch units1
W
48.94 lb
18.64 kg
W
42.50 in
42.50 in
107.95 cm
24.59 in
62.46 cm
05.08 in
12.92 cm
Speakers1
33.42 lb
42.73 lb
50.70 lb
Stand
15.16 kg
19.38 kg
23.00 kg
31.61 in
38.07 in
42.50 in
W
H
Display
D
80.29 cm
21.26 in
54.00 cm
07.58 in
19.25 cm
W
H
D
96.70 cm
24.99 in
63.50 cm
10.18 in
25.86 cm
W
H
D
107.95 cm
27.46 in
69.77 cm
11.74 in
29.83 cm
40.51 cm
W
H
N.A.1
D
W
H
D
48.84 in
124.06 cm
30.44 in
77.32 cm
15.95 in
40.51 cm
Speakers1
38.80 lb
45.55 lb
53.79 lb
85.1 lb
Stand
17.60 kg
20.66 kg
24.40 kg
38.70 kg
1. We do not sell optional speakers for 55-inch displays. Their speakers are already built-in.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
9
Physical Interfaces
Physical Interfaces
Socket
General Appearance
Electrical Power
AC IN
Administration and Security
Kensington security connector1
REMOTE CONTROL IN
RS-232C
Media Playback
AUDIO (RGB DVI)
AV
COMPONENT IN
DVD/HD IN
Y
Cb/Pb
Cr/Pr
HDMI2
DVI-D3 (dual link)
Quick Install Guide for Cisco LCD Professional Series Displays
10
78-19168-01 -C0
Connect a DMP
Socket
General Appearance
D-SUB/RGB
SPEAKER terminals (8 )
1.
http://www.kensington.com.
2. HDMITM , the HDMI logo, and High Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing, LLC.
3. Not present on all models.
Connect a DMP
Caution
TURN OFF ALL EQUIPMENT until all connections are in place.
OFF
Before You Begin
•
Do you have a DMP?
•
Do you have signal cables?
•
Do you have signal cable adapters?
Procedure
zhT
手續
zhS
手續
手続
JA
KO
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
11
Connect a DMP
Step 1
HDMI or DVI?
http://www.cisco.com/go/dms/dmp/install.
HDMI —> DVI
HDMI
Y
Cb/Pb
Cr/Pr
Step 2
RS-232
Step 3
Step 4
ON
Input > (
/
) > HDMI/DVI > Auto/Set.
Step 5
Quick Install Guide for Cisco LCD Professional Series Displays
12
78-19168-01 -C0
Connect Speakers
Connect Speakers
42
32
47
55
Procedure
zhT
zhS
JA
KO
‫ڜ‬ᇘ࿓‫!ݧ‬
ᅝ㺙⿟ᑣ
手続
Step 1
Put speakers in position.
Step 2
Screw in place.
Step 3
Remove paper backing from cable organizers.
Step 4
Affix cable organizers. Then, run speaker cables
through them.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
13
Connect Speakers
Step 5
Use cable ties to gather slack.
Step 6
Plug cable jacks into color-matched terminals.
Step 7
Quick Install Guide for Cisco LCD Professional Series Displays
14
78-19168-01 -C0
Connect a Stand
Connect a Stand
42
32
47
55
Before You Begin
•
Find a large, sturdy table.
•
Find a large towel or other soft fabric.
•
Check package contents.
Procedure
zhT
zhS
JA
KO
‫ڜ‬ᇘ࿓‫!ݧ‬
ᅝ㺙⿟ᑣ
手続
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
15
Maintain a UK Power Cord Assembly
Step 1
Place soft fabric on table.
Step 2
Place display on towel, facing downward.
Step 3
Put the stand in place, as illustrated.
Step 4
Screw the stand securely into place.
Step 5
Snap the cover securely into place.
Step 6
Maintain a UK Power Cord Assembly
UK
When you purchase this product for use in the United Kingdom, the supplied power cord assembly
complies with a residential electrical wiring standard called BS 1363. The power cord is equipped with
a moulded and fitted “mains” plug that is field-replaceable. In turn, this plug contains a separately
field-repeatable fuse whose standard is called BS 1362.
•
Replace the Fuse in a UK Mains Power Plug, page 17
•
Replace an Unsuitable Mains Plug, page 18
Quick Install Guide for Cisco LCD Professional Series Displays
16
78-19168-01 -C0
Maintain a UK Power Cord Assembly
Replace the Fuse in a UK Mains Power Plug
The small, glass cartridge fuse inside a mains plug acts as a safety mechanism. When the plug is
connected to an overheated electrical circuit, the filament inside the fuse weakens and begins to melt.
Then, it snaps in two. This behavior severs the connection between the opposing metal terminals at either
end of the fuse and, thus, disconnects the product from its power source. The benefit is lowered risk of
an electrical fire. However, the product will not work again until you replace the damaged fuse inside
the mains plug.
Procedure
zhT
zhS
JA
KO
Step 1
‫ڜ‬ᇘ࿓‫!ݧ‬
ᅝ㺙⿟ᑣ
手続
Unplug the power cord at both ends.
Do not connect the cord to any socket or any product until you finish the minor repair that this simple
walkthrough describes.
Step 2
Obtain a suitable new cartridge fuse to replace the damaged one.
You will need a 13A fuse, rated at 250V. Generally, this type of fuse is colored brown. Also, verify that
you see either the ASTA mark ( ) or the BSI mark ( ) somewhere on the fuse body.
Step 3
Caution
Step 4
Use a slotted screwdriver blade to lift the fuse cover from the mains plug and reveal the damaged fuse.
Do not misplace or discard the fuse cover! You must not use the power cord again until this cover is in place.
Grip the damaged fuse by its terminals and gently pull it straight out.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
17
Maintain a UK Power Cord Assembly
Step 5
Push the new fuse into place, and then push the fuse cover back in place.
Step 6
Replace an Unsuitable Mains Plug
Is the fitted plug suitable for the mains socket where you will use this product? If not, you must remove
the fitted plug and replace it with a suitable one.
Caution
This product must be grounded (earthed).
Procedure
zhT
zhS
JA
KO
Step 1
‫ڜ‬ᇘ࿓‫!ݧ‬
ᅝ㺙⿟ᑣ
手続
Unplug the power cord at both ends.
Do not connect the cord to any socket or product until you finish the repair that this
walkthrough describes.
Step 2
Unscrew and remove the plug cover.
Step 3
Loosen the screws at each terminal, and then free any wires as needed.
Step 4
Remove the now-disconnected plug and steady the new plug that will replace it.
Quick Install Guide for Cisco LCD Professional Series Displays
18
78-19168-01 -C0
Maintain a UK Power Cord Assembly
Although the wires in our power cord use up-to-date color coding, a plug that you obtain separately
might use other codes to distinguish among its terminals. This figure illustrates our color coding.
Green /
Yellow
Brown
Blue
Our power cord
Earth
Neutral
Live
green/yellow stripes
solid blue
solid brown
Older wiring
•
green/yellow stripes
•
solid blue
•
solid brown
•
solid green
•
solid black
•
solid red
•
the letter E
•
the letter N
•
the letter L
•
the Earth symbol ( )
Step 5
Connect the wires from our power cord to their corresponding terminals in your new plug.
Step 6
Clamp the cable grip securely over the outer insulation of the lead, and not merely over the three wires.
Step 7
Replace the plug cover.
Step 8
Warning
Tip
Destroy and discard the severed plug. A plug with bare wires can be a dangerous shock hazard.
Hire a licensed electrician to complete this hazardous work safely and correctly on your behalf.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
19
Reference
Reference
•
Specifications, page 20
•
Optional Speakers, page 20
Specifications
Optional Speakers
32
42
•
Electrical Output — 10W (RMS).
•
RoHS — Compliant.
•
Audio cables — Included.
•
Impedance — 8 Ω
•
Color — Black.
•
Weight — 0.8 lbs (each).
•
Width — 2.9 in.
•
Height — 13.7 in.
•
Depth — 2.2 in.
47
55
Quick Install Guide for Cisco LCD Professional Series Displays
20
78-19168-01 -C0
Learn More
Learn More
To Learn About
Go To
Cisco DMS Components
Cisco DMS products and technologies
http://cisco.com/go/dms
Cisco DMS technical documentation
http://cisco.com/go/dms/docroadmap
Cisco DMS APIs
http://developer.cisco.com/web/dms
Cisco DMS MIB (SNMP)
http://cisco.com/go/dms/mib
Cisco DMS Services
Cisco Academy of Digital Signage
http://cisco.com/go/dms/ads
Cisco Digital Media Creative Services
http://cisco.com/go/dmcs
Cisco
Service contracts
http://cisco.com/go/cscc
Standard warranties
http://cisco.com/go/warranty 1
Technical support
http://cisco.com/go/support
Technical documentation
http://cisco.com/go/techdocs
Product security
http://cisco.com/go/psirt
Sales
http://cisco.com/go/ordering
Obtaining Documentation or Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the
monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation,
at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be
delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports
RSS Version 2.0.
1. Then, for this product, click the Solution and Segment Warranties tab and, then, click Cisco 3-Year Limited Hardware Warranty Terms.
CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase,
Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good,
Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks;
Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card,
and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA,
CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus,
Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast,
EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream,
Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV,
PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are
registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. (0910R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only.
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.
Quick Install Guide for Cisco LCD Professional Series Displays
78-19168-01 -C0
21
Learn More
Printed in Mexico
Quick Install Guide for Cisco LCD Professional Series Displays
22
78-19168-01 -C0