ME 360 – H02
Name _________________________
1) Norton text problem 5-42. See Section 4.17 in Norton for help with thin wall pressure
vessels.
2) Norton text problem 5-68. HOWEVER - use 1045 cold rolled steel fully keyed shaft
available from McMaster-Carr www.mcmaster.com . Do not include stress concentrations for
the keyway. What is the cost for a two foot length of this shaft? What is the standard size
keyway used for your shaft?
ME 360 – H02
Name _________________________
3) Norton text problem 5-73. HOWEVER - use 0.5 inch thick 1018 cold rolled steel square or
flat bar stock available from Online Metals www.onlinemetals.com . Do not include stress
concentrations for connections at A and B. Material properties are available at
http://www.onlinemetals.com/productguides/steelguide.cfm What is the cost and weight of one
bar?
4) Norton text problem 5-73. HOWEVER - use 0.5 inch thick standard size 6061-T6511 (or
6061-T6) aluminum square or flat bar stock available from Online Metals
www.onlinemetals.com . Do not include stress concentrations for connections at A and B.
Material properties are available at
https://www.onlinemetals.com/productguides/aluminumguide.cfm What is the cost and weight
of one bar?
5) Is steel or aluminum preferrable for the connecting rod in Norton text problem 5-73? Explain
your choice and be explicit about your decision process.