New and Changed Commands
This list summarizes the commands which were newly added and changed in Cisco IOS XR Software, Release
5.2.x, and gives you the location where the commands are documented.
To read additional information about Cisco IOS XR Software features, see the Release Notes:
Release Notes
The latest versions of Cisco IOS XR Software documents are available at:
Cisco IOS XR Software Documents
Configuration Guides
Command References
• Commands Newly Added and Changed in Release 5.2.x, page 1
Commands Newly Added and Changed in Release 5.2.x
Command History
Table 1: Commands newly added and changed for Cisco ASR 9000 Series Routers
Command
Change Description
Release 5.2.2
match (class-map)
The command was modified to add new keyword,
service-name.
initiator unclassified-ip
This command was introduced.
ipsubscriber routed
Initiator unclassified-ip was added for the support of
packet-triggered IPv4 or IPv6 routed subscriber
sessions.
access-tracking
This command was introduced.
accounting interim variation
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
1
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
core-tracking
This command was introduced.
disable (subscriber redundancy)
This command was introduced.
hold-timer (subscriber redundancy)
This command was introduced.
interface-list
This command was introduced.
preferred-role
This command was introduced.
source-interface (subscriber redundancy)
This command was introduced.
subscriber redundancy
This command was introduced.
subscriber redundancy group
This command was introduced.
subscriber redundancy switchover
This command was introduced.
subscriber redundancy synchronize
This command was introduced.
tracking-disable
This command was introduced.
virtual-mac
This command was introduced.
virtual-mac-disable
This command was introduced.
virtual-mac-prefix
This command was introduced.
show subscriber redundancy group
This command was introduced.
show subscriber redundancy summary
This command was introduced.
lpts pifib hardware police
The acl and vrf keywords were added as part of ACL
based policer feature.
show lpts pifib hardware entry
The show command output was updated to display
LPTS mapped to an ACL.
bootfile
This command is supported in DHCPv4 server profile
class sub-mode.
database (DHCPv6 Binding)
The relay keyword was added and the command was
supported under DHCP IPv6 profile relay
configuration mode.
default-router
This command is supported in DHCPv4 server profile
class sub-mode.
dns-server
This command was introduced.
domain-name
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
2
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
helper-address
This command is supported in DHCPv6 profile relay
configuration submode.
iana-route-add
This command was introduced.
interface (DHCP)
Support for DHCP IPv6 relay was added.
netbios-name-server
This command is supported in DHCPv4 server profile
class sub-mode.
netbios-node-type
This command is supported in DHCPv4 server profile
class sub-mode.
option
This command is supported in DHCPv4 server profile
class sub-mode.
profile (DHCP)
The support for DHCP IPv6 relay was added.
subnet-mask
This command was introduced.
show dhcp ipv6 relay binding
This command was introduced.
show dhcp ipv6 relay statistics
This command was introduced.
clear dhcp ipv6 binding
This command was introduced.
clear dhcp ipv6 relay statistics
This command was introduced.
address (pmipv6)
This command was introduced.
auth-option
This command was introduced.
bce
This command was introduced.
bri
This command was introduced.
clear ipv6 mobile pmipv6 lma binding
This command was introduced.
clear ipv6 mobile pmipv6 lma stats
This command was introduced.
default profile
This command was introduced.
dynamic mag learning
This command was introduced.
hnp
This command was introduced.
ipv6 mobile pmipv6-domain
This command was introduced.
ipv6 mobile pmipv6-lma
This command was introduced.
ipv4-address
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
3
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
ipv6-address
This command was introduced.
lma
This command was introduced.
mag
This command was introduced.
network
This command was introduced.
nai (pmipv6-domain)
This command was introduced.
pool
This command was introduced.
replay-protection
This command was introduced.
show ipv6 mobile pmipv6 lma binding
This command was introduced.
show ipv6 mobile pmipv6 lma globals
This command was introduced.
show ipv6 mobile pmipv6 lma stats
This command was introduced.
tunnel destination
The tunnel destination can be an IPv6 address.
tunnel mode
Support for GRE tunnel on an IPv6 transport network.
tunnel source
The tunnel source can be an IPv6 address.
affinity
Support was added to start a 5 minute timer when
affinity failure occurs.
match mpls disposition
This command was introduced.
set destination-address
This command was introduced.
show igmp nsr
This command was introduced.
show msdp nsr
This command was introduced.
nv satellite offload ipv4 multicast enable
This command was introduced.
show mrib nsr end
This command was introduced.
show mrib platform trace location standby
This command was introduced.
show igmp snooping bridge-domain
The command output was enhanced to include the
Multicast Offload information.
show igmp snooping group
The Bidirectional IGMP Snoop Sync feature
enhancement enables the command to be run on both
active and standby nodes.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
4
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
show igmp snooping redundancy
The Bidirectional IGMP Snoop Sync feature
enhancement enables the command to be run on both
active and standby hosts.
show l2vpn forwarding bridge-domain mroute
The show output command was enhanced to include
the satellite multicast offload information.
show l2vpn forwarding bridge-domain mroute detail The show output command was enhanced to include
the satellite multicast offload information.
show l2vpn forwarding bridge-domain mroute
hardware ingress detail
The show output command was enhanced to include
the satellite multicast offload information.
show pim nsr
This command was introduced.
show nv satellite status
This command was updated to display nV optical
shelf system information.
show nv satellite optical applications
This command was introduced.
show nv satellite optical inventory
This command was introduced.
show nv satellite optical schema
This command was introduced.
add cmd
This command was introduced.
bulkstat data
This command was introduced.
context
This command was introduced.
data-group
This command was introduced.
discard
This command was introduced.
enable
This command was introduced.
bulkstat filter
This command was introduction.
interval
This command was introduced.
object
This command was introduced.
process
This command was introduced.
bulkstat profile
This command was introduced.
range
This command was introduced.
repetition
This command was introduced.
show bulkstat data-group
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
5
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
show bulkstat profile
This command was introduced.
show dcm assa
This command was introduced.
show dcm client
This command was added.
show dcm data-providers
This command was introduced.
show dcm session
This command was introduced.
show snmp request incoming-queue detail
This command was introduced.
show snmp request type summary
This command was introduced.
show snmp request type detail
This command was introduced.
show snmp request drop summary
This command was introduced.
show snmp request overload stats
This command was introduced.
show snmp statistics oid group
This command was introduced.
show snmp statistics pdu
This command was introduced.
show snmp statistics slow oid
This command was introduced.
show snmp statistics poll oid all
This command was introduced.
Show snmp statistics poll oid nms
This command was introduced.
show snmp statistics slow oid [after/before] hh:mm:ss This command was introduced.
day mday year
show snmp mib ifmib general
This command was introduced.
show snmp mib ifmib cache
This command was introduced.
show snmp mib ifmib statsd
This command was introduced.
show snmp traps details
This command was introduced.
show snmp informs details
This command was introduced.
show logging onboard
The keyword common was added for the OBFL
generic message logging feature.
clear logging onboard
The keyword common was added for the OBFL
generic message logging feature.
ttcp receive
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
6
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
ttcp transmit
This command was introduced.
Release 5.2.0
event
The exception event was added for service rollback
failure due to multi-action CoA request failure.
encapsulation ambiguous dot1ad
The support for outer VLAN range was added in
BNG.
encapsulation ambiguous dot1q
The support for outer VLAN range was added in
BNG.
shape average (BNG)
$shape-rate =rate option was added to support QoS
shaper parameterization in BNG.
subscriber session limit
The session_limit was made an optional parameter
for the no form of this command.
show subscriber session
The output of show subscriber session all username
command was modified to display the fields,
Username , Interface , State and Subscriber IP Addr
, instead of Type , Interface , State and Username
bulk-port-alloc (NAT44)
The minimum size for bulk port allocation was
reduced to 8.
nat-mode
This command was introduced.
show cgn nat44 inside-vrf counters
Additional counters were introduced.
show cgn nat44 static-map
This command was introduced.
static-mapping-file direction
This command was introduced.
lanmode on
This command was introduced.
report sd-ber
This command was introduced.
report sf-ber disable
This command was introduced.
threshold sd-ber
This command was introduced.
threshold sf-ber
This command was introduced.
show dhcp ipv4 client
This command was introduced.
show dhcp ipv4 client statistics
This command was introduced.
clear dhcp ipv4 client
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
7
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
clear dhcp ipv4 client statistics
This command was introduced.
show tech support dhcp ipv4 client
This command was introduced.
tunnel vrf
This command was introduced.
interface nve
This command was introduced.
member
This command was introduced.
member vni
This command was introduced.
overlay-encapsulation
This command was introduced.
show nve interface
This command was introduced.
show nve peers
This command was introduced.
show nve vni
This command was introduced.
source-interface loopback
This command was introduced.
match dscp
The min-value and max-value variables were added.
match protocol
The min-value and max-value variables were added.
policy-map
The pbr keyword was added.
bidirectional
This command was introduced.
show mpls traffic-eng tunnels bidirectional-associated This command was introduced.
show mfib hardware route logical
This command was changed from show mfib hardware
route internal to show mfib hardware route logical.
options
This command was introduced.
address-family (BGP)
The following keywords were added: flowspec, vpnv4
multicast
bgp multipath as-path
This command was introduced.
next-hop-unchanged
The multipath keyword was added.
show bgp
The command output was modified to include the
following: Flowspec configuration information,
VPNv4 multicast prefixes
class-map type traffic (BGP-flowspec)
This command was introduced.
class type traffic
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
8
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
drop (BGP-flowspec)
This command was introduced.
flowspec
This command was introduced.
flowspec disable
This command was introduced.
local-install
This command was introduced.
match destination-address
This command was introduced.
match destination-port
The min-value and max-value variables were added.
match fragment-type
This command was introduced.
match icmp code
This command was introduced.
match icmp type
This command was introduced.
match packet length
This command was introduced.
match source-address
This command was introduced.
match source-port
The min-value and max-value variables were added.
match tcp flag
This command was introduced.
redirect (BGP Flowspec)
This command was introduced.
service-policy
This command was introduced.
show flowspec
This command was introduced.
show pbr internal
This command was introduced.
show pbr trace
This command was introduced.
bfd bundle per-member mode
This command was introduced.
bfd encap mode
This command was introduced.
bfd fast-detect (EIGRP)
This command was introduced.
bfd minimum-interval (EIGRP)
This command was introduced.
bfd multiplier (EIGRP)
This command was introduced.
show eigrp interfaces
The command output was modified to display BFD
information.
show eigrp neighbors
The command output was modified to display BFD
information.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
9
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
prefix-sid index
This command was introduced.
segment-routing
This command was introduced.
show isis database
The output of this command when verbose keyword
is used is modified to display adjacency prefix
segment IDs.
show isis route
The output of this command when detail keyword is
used is modified to display prefix segment ID index
values.
if route-aggregated
This command was introduced.
remove as-path private-as
This command was introduced.
rpl set-exit-as-abort
This command was introduced.
set administrative-distance
This command was introduced.
show openflow hardware capabilities
This command was introduced.
show openflow interface switch
This command was introduced.
show policy-map transient targets summary
This command was introduced.
show policy-map transient list type pbr
This command was introduced.
show policy-map transient type pbr pmap-name
This command was introduced.
show table-cap table-type
This command was introduced.
license smart enable
This command was introduced.
show license all
This command was introduced.
show license certificate
This command was introduced.
show license entitlement
This command was introduced.
show license features
This command was introduced.
show license ha
This command was introduced.
show license pool
This command was introduced.
show license register-status
This command was introduced.
show license scheduler
This command was introduced.
show license status
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
10
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
Command
Change Description
show license udi
This command was introduced.
show license version
This command was introduced.
hw-module cts-enable all
This command was introduced.
show controllers NP configSram
This command was introduced.
crypto ca trustpool import url
This command was introduced.
crypto ca trustpool policy
This command was introduced.
show crypto ca trustpool policy
This command was introduced.
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
11
New and Changed Commands
Commands Newly Added and Changed in Release 5.2.x
New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation
Services Routers
12