MARSEAL® Membranes
REPAIR PROCEDURE
For MARSEAL® 8000
1. Clean around damaged area. A light solvent (mineral spirits) wipe is recommended.
2. Cut a patch of Marseal® 8000 Sealing Strip to extend at least two inches beyond damaged area. The edges of the patch shall be rounded
to eliminate square corners.
3. Carefully hot-air weld around perimeter of patch and test welds in accordance with ASTM D 4437.
5020 Panther Parkway, Seville, Ohio 44273
Ph. 800-321-5583 • Fx. 330-769-9334
MARSEAL® 8000 Repair Procedure
www.marseal.com