NetFlow Dynamic Top Talkers CLI
The NetFlow Dynamic Top Talkers CLI feature gives you an overview of the highest volume traffic in
your network by aggregating flows on a common field. For example, you can aggregate all of the flows
for a destination network by aggregating them on the destination IP address prefix. There are over 20
fields from flows that you can aggregate the highest volume traffic on.
Configuration Information
Configuration information is included in the “Detecting and Analyzing Network Threats With NetFlow”
module in the “Configuring Advanced Use of NetFlow for Analyzing Network Traffic Data chapter” of
the Cisco IOS NetFlow Configuration Guide, Release 12.4T at the following URL:
•
http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/nf_detct_analy_thrts_ps6441_TS
D_Products_Configuration_Guide_Chapter.html
Command Reference Information
Command reference information is included in the Cisco IOS NetFlow Command Reference, at the
following URL:
•
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_book.html
New or Modified Commands
The following commands are new or modified for this feature:
•
show ip flow top
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands
List, Release 12.4T, at the following URL:
•
http://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_book.html
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS
Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands,
Release 12.4T, document at the following URL:
•
https://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_nml.html
1
NetFlow Dynamic Top Talkers CLI
2