Introduction
This document introduces the 9.1(1) release of the Cisco Unified Intelligence Center software.
This is a maintenance release that follows the 9.0(2) release in November 2012.
Release 9.1(1) is offered for new deployments and upgrades from Release 8.0(1), 8.0(2), 8.0(3), 8.0(4),
8.5(2), 8.5(3), 8.5(4), 9.0(1), and 9.0(2).
For detailed instructions for installing and upgrading to Cisco Unified Intelligence Center Release 9.1(1),
see the Cisco Unified Intelligence Center Installation and Upgrade Guide.
• Unified Intelligence Center User Documentation, page 1
• New and Changed Information, page 2
• System Requirements, page 3
• Important Notes, page 3
• Open Caveats in This Release, page 4
• Resolved Caveats in This Release, page 4
• Bug Search Tool, page 8
• Downloading the Unified Intelligence Center Installation File from the Cisco Website, page 8
• Documentation Feedback, page 8
Unified Intelligence Center User Documentation
In addition to the Release Notes and the Reporting Application and Administration online help, a list of all
product documentation for Cisco Unified Intelligence Center is available on the Cisco.com website.
Note
If you do not find a document for a specific release, use the document from the previous release. New
versions of documents are posted only when the content changes between releases.
• Cisco Unified Intelligence Center Installation and Upgrade Guide
• User Guide for the Cisco Unified Intelligence Center Reporting Application
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
1
Introduction
New and Changed Information
• Report Template Reference Guide for Cisco Unified Intelligence Center
• Administration Console User Guide for Cisco Unified Intelligence Center
• Hardware and System Software Specification (Bill of Materials) for Cisco Unified Intelligence Center
• Cisco Unified Intelligence Center Solution Reference Network Design (SRND)
• Cisco Unified Intelligence Center TCP and Port Usage
• Unified Intelligence Center Virtualization Wiki
• Online Troubleshooting Tips Wiki
New and Changed Information
Lock user accounts automatically after five unsuccessful login attempts
Unified Intelligence Center locks user accounts after five unsuccessful login attempts if users log in to
Unified Intelligence Center using the wrong credentials.
Alert the administrator if DRF backup schedule is not configured
Unified Intelligence Center alerts the administrator if the administrator does not have a Disaster Recovery
Framework (DRF) backup schedule configured.
Authenticate secured permalink
Unified Intelligence Center supports secured permalink. Permalink authentication ensures that permalink
is accessible only after the user is authenticated.
Include variable parameters to the existing permalink
Unified Intelligence Center supports inclusion of variable parameters to the existing permalink.
Show and hide the generated and filter information
Unified Intelligence Center supports showing and hiding the generated and filter information in the
report viewer.
Support for HTTPS and HTTP
Unified Intelligence Center supports both HTTPS and HTTP. You can ask the administrator to explicitly
enable support for HTTP.
Create new entities and to modify existing entities in a category
Unified Intelligence Center supports creation of new entities and modification of existing entities in a
category if you have write permission. Users with only execute permission on any dashboard category,
report definition category, and report category can no longer create new entities and cannot modify
existing entities within these categories. To create new entities and to modify existing entities, you
must have write permission for the corresponding category, which you can request from the administrator.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
2
Introduction
System Requirements
Access a report through the authorized permalink
Unified Intelligence Center supports access to a report through the authorized permalink. Users without
access to a category can now access a report through the authorized permalink if they have execute
permission for that report.
Performance optimization in Internet Explorer for loading collection values
Unified Intelligence Center now quickly loads a large number of collection values in Internet Explorer.
The browser does not repeatedly prompt you to load more values.
System Requirements
The Hardware and System Software Specification (Bill of Materials) for Cisco Unified Intelligence Center
is posted on the Cisco.com website. You can find the Cisco Unified Communications Compatibility Tool for
the various Cisco Unified Communications System (UCS) releases at:
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet.
Important Notes
Upgrading VMware Tools
This process of upgrading VMware tools is applicable only for Unified Intelligence Center Systems running
on Unified Communications System virtualized hardware. VMware Tools are specialized drivers for virtual
hardware that are installed in the Unified Communications (UC) applications when they are running in the
virtualized environment. The VMware tools version running in the UC application must be in sync with the
version of ESXi being used. The methods that the UC applications use to upgrade the VMware Tools are
given in the UCS Virtualization Wiki.
Cisco Unified Intelligence Center supports upgrading VMware Tools using the command: utils vmtools
upgrade.
To know more about the command syntax, see “Appendix A: Command Line Interface” in the Administration
Console User Guide for Cisco Unified Intelligence Center.
Reports for Non-Daylight savings time
In Unified Intelligence Center, if you execute a historical report during the daylight savings time period to
get data for a non-daylight savings time period, the report fields will display data that is early by an hour.
For example, if you execute a report on April 12, 2013 with date time filter set from 1:00:00 a.m. to 1:59:59
a.m., December 12, 2012, the report will display information from 12:00:00 a.m. to 12:59:59 a.m. on December
12 2012, that is one hour earlier.
You will notice the same behavior for the entire day when the daylight savings time is set back to the
non-daylight savings time period. The reports will have the correct date time range only from the day after
that midnight.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
3
Introduction
Open Caveats in This Release
Localization
The user interface is localized in the following languages: Simplified and Traditional Chinese, Danish, Dutch,
English, European and Canadian French, German, Italian, Japanese, Korean, Polish, Brazilian Portuguese,
Russian, Spanish, Swedish, Finnish, Norwegian, and Turkish.
Open Caveats in This Release
The following table lists open caveats in Unified Intelligence Center 10.0(1).
Table 1: Open Caveats for Unified Intelligence Center
Identifier
Severity
Component
Headline
CSCuh55831
4
documentation.srnd CUIC reports for a Non-DST time period return results
with 1 hour off
Identifier
Severity
Component
Headline
CSCuf20670
3
security
Encoding issue with user name starting with 'u' and 'x'
Resolved Caveats in This Release
The following table lists resolved caveats which may cause unexpected behavior in Unified Intelligence Center
9.1(1).
Table 2: Resolved Caveats for Unified Intelligence Center
Identifier
Severity
Component
Headline
CSCua46681
3
oamp
OAMP device control shows CUIC status as UNKNOWN
CSCub96205
2
serviceability
Set Cuic Trace CLI not working in CUIC 9.0(x)
CSCuc50263
3
install
Unable to install COP on CUIC 9.0(1)
CSCuc60161
3
serviceability
COP installation breaks continuously after upgrade is
cancelled once.
CSCuc76708
4
charts
Bar graph disappears when larger then range configured
CSCuc87951
6
oamp
Inadequate Account Lockout ::Authentication: Brute Force
CSCuc88665
6
doc
UCCX: CUIC Help Files Reference UCCE
CSCuc90001
4
i18n
JPN: CUIC: English strings on error message of Field
Formatting.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
4
Introduction
Resolved Caveats in This Release
Identifier
Severity
Component
Headline
CSCuc92766
4
i18n
Jpn: There is a mistranslation of "English (U.K.)" on login
page.
CSCuc93151
4
report-manager ALL-LANG: CUIC: Inconsistent name between field
name and error message.
CSCud04974
3
grid
CSCud05027
3
user-management Unable to validate incorrect and special char DS in VL
editor page
CSCud07956
3
report-viewers CUIC v8.5(4) Permalink report provides Error [10603]
CSCud09846
3
report-viewers Observed incorrect error msg, if launched report is deleted.
CSCud12122
4
localization
ALL-LANG: CUIS: Disrupted layout in Report Editor
CSCud12285
5
localization
ALL-LANG: CUIS: Hard-coded slash "\" char in button
on FR_FR and FR_CA
CSCud19392
3
security
Report "Save As" Fails When User is in Group With
Russian Characters.
CSCud19562
3
report-manager Row was updated or deleted by another transaction
CSCud22231
3
report-manager StaleObjectStateException when reports are
created/modified
CSCud23618
3
export-import
STOCK folder is not read-only. Users allowed to create
reports under it
CSCud27099
3
doc
Cuic Collection takes up to 50 characters. But this is
missing in the Doc
CSCud27452
3
templates_uccx CUIC reports shows blank data when TO and From field
has 12 to 1 PM
CSCud33365
2
report-viewers Unable to run Stock Reports
CSCud35355
3
user-management My Group (Group Name) is garbled if default group has
Non English names
CSCud38919
3
doc
Doc impacts of removing CREATE options for entities
that have EXEC perm
CSCud42969
3
install
COP doesn't gets installed on build 9.1.1
CSCud42982
3
templates_uccx Template help is grayed out for online help pointing to
"https" URL
Incorrect error message while validating Grid Field Width
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
5
Introduction
Resolved Caveats in This Release
Identifier
Severity
Component
CSCud43350
3
report-manager Unable to Create SQL query based Report Definition in
CUIC
CSCud44842
2
datasource_manager Unable to Save a new datasource
CSCud45597
4
scheduler
CSCud51925
3
report-manager Values not listed after refresh if the filter value string
overlapping
CSCud52139
3
report-manager Users with EXEC perm on a category should not be
allowed to import into it
CSCud52560
4
report-manager Sometimes two reports share the same default filter id
CSCud53254
3
report-viewers Found null in SQL query for Anonymous block with
parameter type DATE
CSCud58098
3
security
CSCud61624
3
report-viewers Found incorrect error msg in 2-node, if report is deleted
from 1-node
CSCud61667
3
doc
"CHANGEME Online Help" is coming as title name for
online help's
CSCud73840
3
oamp
RTMT counter doesn't populate in the tool UI
CSCud75118
4
ui_server
ReportsUsersLoggedIn counter leak
CSCud76425
3
export-import
Export of charts fail
CSCud81978
3
templates_icm Wrong % LogonDuration Summary value for "Agent Not
Ready" stock report
CSCud83053
3
i18n
CSCud95817
3
user-management Unable to modify user profile of a user created in CUIC
in double byte
CSCud96640
3
serviceability
Audit Trail report doesn't capture LOGIN operation of
LDAP users
CSCud97417
3
security
Rest URL if appended with / or /<str> are working without
authentication
CSCue05980
3
report-manager CUIC Importing Report that already exist causes report
to go missing.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
6
Headline
Directory path for Scheduler - SFTP requires "/" for
Windows SFTP server
Account Lockout not working for Administrator
Date Formats for different locales in CUIC
Introduction
Resolved Caveats in This Release
Identifier
Severity
Component
Headline
CSCue05992
3
user-management Collections are not getting automatically refreshed at
midnight
CSCue07091
3
i18n
User Groups - Duplicate groups error message is not
localized
CSCue07347
3
serviceability
RTMT shows incorrect values for few
ReportingEngineCounters
CSCue07395
3
dashboards
Secured Permalink from another CUIC doesn't get loaded
in CUIC dashboard
CSCue08003
4
ui_server
Views Editor: Links menu not disabled when none
selected
CSCue08090
3
report-manager relative date range feature not coming if display name has
extra spaces
CSCue17608
3
security
once logged in http then it will not allow you to login on
https
CSCue17643
3
security
Dashboard http secured permalink
CSCue18694
3
data-access-layer Can't login to CUIC admin page.
CSCue20326
3
report-viewers Permalink not getting loaded in CUIC
CSCue20925
3
scheduler
CSCue25539
3
data-access-layer Permalinks - Memory Leak in CUIC
CSCue26811
3
install
upgrade from 8.5x to 9.x should be possible with ESXi
4.x Version (Max5): 8.5(4)
CSCue32460
6
install
CUIC rpm name update
CSCue32871
6
scheduler
CUIC scheduler runs every time it is edited.
CSCue35428
3
security
Launch report, in next tab open same CUIC, observe error
in first CUIC.
CSCue35454
3
security
When login to CUIC, observed filter values instead of
CUIC page.
CSCue40638
3
security
IP should not be displayed in the about pop out.
CSCue40645
3
security
Security Editor Add Edit User List with a different User.
CSCue42644
3
export-import
Report Export Does Not Save Drill downs
Empty Schedule Saved And Fails To Run.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
7
Introduction
Bug Search Tool
Identifier
Severity
Component
Headline
CSCue48035
3
report-manager Users with EXEC perm on category should not be allowed
Save As to it
CSCue50622
3
report-manager Report fails to import if it has a drill down
CSCue61384
4
i18n
JPN: CUIC: English string in Field Formatting section
CSCue65883
3
scheduler
CUIC scheduler throws DatasetNot found exception
Bug Search Tool
If you have an account with Cisco.com, you can use the Bug Search tool to find caveats of any severity for
any release.
Access the Bug Search tool at https://www.cisco.com/cisco/psn/bssprt/bss. Enter the bug identifier in the
search box and press return or click Search.
Downloading the Unified Intelligence Center Installation File
from the Cisco Website
You can download the installation ISO file and Unified Contact Center Enterprise (UCCE) Stock Templates
from the Download Software page on Cisco.com.
Documentation Feedback
You can provide comments about this document by sending email to the following address:
mailto:[email protected].
We appreciate your comments.
Release Notes for Cisco Unified Intelligence Center, Release 9.1(1)
8