Wood Floor Care—Restoration—Periodic Recoating
Frequency
As needed
Materials & Equipment
Dust mop or vacuum
Clarke sander with vacuum
120 grit screens
Mop bucket
Wet floor/Caution signs
Floor scrubber or Boost with white pads
Squeegees
Large towels
Wet vac
Towel or walk off mat
T-Bar (light weight)
Lamb’s wool applicator pads
All-purpose cleaner
Areas Where Applicable
Wood flooring or other flooring as directed
Preparation
Make sure to have all materials on hand and ready to use. Contact OCCE and reserve the
area for as long as possible. Make sure there is enough time to complete the project. Have
Energy Management adjust the HVAC units. Ensure all materials are on hand and ready to
use.
Procedure
1) Place wet floor/caution signs, put on PPE and place a towel or walk off mat outside the
area that is to be cleaned.
2) Sand with a 120 grit screen. Do not move too quickly or the floor will still have shiny spots.
Use cut up pieces of screen to clean corners. Replace screens if they become dirty or
clogged.
3) Keep an eye on your vacuum to ensure it doesn’t get too full.
Wood Floor Care—Restoration—Periodic Recoating
New
2/15/2017
CT
Title
Revision
Date
Approved
4) Use a clean towel and squeegee to tack the floor with clean water. You can also use the
floor scrubber or boost, but make sure you tack around the edges and corners.
5) Make sure floor is dry and dust free.
6) Apply floor finish.
Cleanup
Wipe down, rinse and dry all equipment. Return to proper storage areas.
Safety & PPE Recommendations
PPE recommended includes hand and eye protection.
Performance Standards
Floor should be free from dirt and ready to accept new finish.
Wood Floor Care—Restoration—Periodic Recoating
New
2/15/2017
CT
Title
Revision
Date
Approved