Lapace Transforms
Disclaimer: The information on this page has not been checked by an independent person. Use
this information at your own risk.
ROYMECH
Home
Control Index
Laplace Transforms
Introduction
In control system design it is necessary, to analyse the performance and stability of a proposed system before it is built or implemented.
Many analysis techniques use transformed variables to facilitate mathematical treatment of the problem. In the analysis of continuous time
dynamical systems, this generally involves the use of Laplace Transforms
Applying Laplace Transforms is analogous to using logarithms to simplify certain types of mathematical operations. By taking logarithms,
numbers are transformed into powers of 10 or e (natural logarithms ). As a result of the transformations, mathematical multiplications and
divisions are replaced by additions and subtractions respectively. Similarly, the application of Laplace Transforms to the analysis of
systems which can be described by linear, ordinary time differential equations overcomes some of the complexities encountered in the timedomain solution of such equations.
Laplace Transforms are used to convert time domain relationships to a set of equations expressed in terms of the Laplace operator 's'.
Thereafter, the solution of the original problem is effected by simple algebraic manipulations in the 's' or Laplace domain rather than the
time domain.
The Laplace Transform of a time variable f(t) is arrived at by multiplying f(t) by e -st and integrating from 0 to infinity..
f(t) must be a given function which is defined for all positive values of t.
s is a complex variable defined by... s = α +jω and j = sqrt (-1).
A table of laplace transforms is available to transform real time domain variables to laplace transforms. The necessary operations are
carried out and the laplace transforms obtained in terms of s are then inverted from the s domain to the time (t) domain. This tranformation
from the s to the t domain is called the inverse transform...
The contour integral which defines the inverse Laplace Transform is shown below... for reference only, for in practice, this integral is
seldom used as table lookup are generally all the operations required for the inverse transform procedure..
Laplace Transform Operations.
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (1 of 8)15/01/2010 14:33:47
Lapace Transforms
Operation
f(t)
x 1 f 1 (t) + x 2 f
Linearity
2
Constant
Multiplication
Complex shift
Theorem
Real shift
Theorem
Scaling
Theorem
First Derivative
2nd Derivative
(t)
a.f(t)
e
± a.t
F(s)
x 1 F 1 (s) + x 2 F 2 (s)
a.F(s)
.f(t)
F(s a.t )
f( t - T )
e -Ts F(s) for (T >= 0 )
f( t / a )
a F(as)
f' (t)
sF(s) - f(0+)
f'' (t)
s 2 (F(s) - sf(0+) - f'(0+)
s 3 (F(s) - s 2. f(0+) - s.f'(0+) - f''(0+)
4th 5th .. Derivative follow principles established above
3rd Derivative
f''' (t)
First Integral
(1/s).F.(s)
Convolution
Integral
F 1(s). F 2(s)
Table showing selection of Laplace Transforms.
Laplace Transforms
No
Time Function = f(t)
1 δ ( t )..Unit impulse
Laplace Transform = F(s)
1
2
δ(t - T)..Delayed impulse
e -Ts
3
t ...Unit ramp
1/s2
4
tn
n ! / s ( n+1 )
5
e - at
1/(s+a)
6
e at
1/(s-a)
7
(1 / a) .(1 - e -at )
1 / {s.( s + a )}
8
(t n / n !)e - at
1 /(s + a ) n - 1...n = 1,2,3,4,...
9
sin ωt
ω / (s 2 + ω 2 )
10 cos ωt
s / (s 2 + ω 2 )
11
12
13 (1 / ω 2) .(1 — cos ωt )
1 / {s.( s 2 + ω 2 )}
14 (1 / a 2) .(a.t — 1 + e -at )
1 / {s 2.( s + a )}
15
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (2 of 8)15/01/2010 14:33:47
Lapace Transforms
16
17 u(t) or 1 ...Unit step
1/s
18 u(t - T)...Delayed step
( 1 / s )e -Ts
19
u(t) - u(t - T) or 1 ...
Rectangular Pulse
( 1 / s ) (1- e -Ts )
21 e — at cos ωt
(s+a) / { (s+a) 2 + ω 2 }
22 (1 / a 2 )(1 — e -at — ate -at )
(1 / s) ( s + a) 2
23
24 1 / [( s + a ) 2 + ω 2 ]
(1/ω).e -at sin ωt
25
26
Derivation of table values
examples on how the table values have been derived are provided below.
From above the transform for a unit step i.e f(1) is easily obtained by setting a = 0 ( e 0.t) = 1)
From above the transform for cos ωt and sin ωt is obtained by setting a = jω
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (3 of 8)15/01/2010 14:33:47
Lapace Transforms
Laplace transform example
An example of using Laplace transforms is provided below
The manipulation of the laplace tranform equation into a form to enable a convenient inverse transform often involves use of partial
fractions...
Partial Fraction Expansion...Notes are also provided for partial fractions on webpage Partial Fractions
The splitting up of a ratio of polynomials is often necessary to produce simpler ratios from which inverse Laplace transforms are more
conveniently obtained. The most favoured procedure for converting using hands-on (as opposed to using computers) is the "Heaviside
cover up" procedure..
An example application including partial fraction expansion is as follows.....
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (4 of 8)15/01/2010 14:33:47
Lapace Transforms
Partial Fraction Expansion process using the Heaviside cover up method
The Laplace operations generally result in a ratio
This must be proper in that the order of the denominator D(s) must be higher than the numerator N(s). If the function is not proper then the
numerator N(s) must be divided by the denominator using the long division method.
The next step is to factor D(s)
a 1,a 1 etc are the roots of D(s).
D(s) is then rewritten in partial fraction form..
To obtain a 1 simply multiply both sides of the equation by (s - a 1 ) letting s = a 1 This results in all terms on the RHS becoming zero apart
from a 1...
G(s).( s-a 1 )| s = a 1 = a 1
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (5 of 8)15/01/2010 14:33:47
Lapace Transforms
The LHS is multiplied be (s - a 1) thus cancelling out (s - a 1)in the denominator. ... and all instances of s are then replaced by a 1
Note: If one of the terms in the numerator is s then this is simply equivalent to (s- a x) with a x = 0.
Repeated Roots....
When the denominator has repeated roots the breakdown into partial fractions is treated differently as shown below...
The factor b 0 is obtained in exactly the same way as above..
The factor b 1 is obtained by first differentiating G(s).(s-b) with respect to ds and then substituting s with b as before. This will generally
involve the differentiation d(u/v) = (vdu - udv)/v 2..
The factors b 2 to b r is obtained by progressive differentiation of G(s)(s-b) and dividing the result by the factorial of the level of
differentiation (if d/ds 2 then divide by 2!, if , d/ds 3 then divide by 3!(6))...
Complex Roots....
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (6 of 8)15/01/2010 14:33:47
Lapace Transforms
Sites & Links
For Control
Information
1. Vibration
Data ..Table of
Laplace
Transforms
2. Mathworld ..
Laplace
TransformsAuthoritative
Information
3. Umist ..
Download ..
Introduction to
Laplace
Transforms
4. Partial
Fraction
Expansion ..
Very clear
explanation of
principles
involved
This page is being developed
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (7 of 8)15/01/2010 14:33:47
Lapace Transforms
Home
Control Index
Please Send Comments to [email protected]
Last Updated 17/02/2006
file:///I|/A-d1129/H0-622/Dokumen-pendukung/P2/Lapace%20Transforms.htm (8 of 8)15/01/2010 14:33:47