Information Relocated—Account and
Authorization Codes, Speed Call, and MLHG for
SIP Endpoints Feature Module
Revised: July 10, 2010
In Release 6.0 and later, the following business and commercial functions are supported for SIP-based
endpoints. This support is similar to the existing support that is provided for network-based call
signaling (NCS) and MGCP endpoints. Go to each section for feature descriptions and provisioning
procedures.
For the latest information on this Cisco BTS 10200 Softswitch feature, see:
Information
Link to Information in the Standard Documentation
Set
Collection of Account and
Authorization Codes
http://www.cisco.com/en/US/docs/voice_ip_comm/b Cisco BTS 10200 Softswitch SIP
ts/6.0/protocol/guide/25sub.html#wp1064041
Guide, Release 6.0.x.
Document Name
See Collection of Account and
Authorization Codes in MGCP
Features and SIP Support (Table
2-1).
1-Digit and 2-Digit Speed Call
and Group Speed Call
http://www.cisco.com/en/US/docs/voice_ip_comm/b Cisco BTS 10200 Softswitch SIP
ts/6.0/protocol/guide/25sub.html#wp1064041
Guide, Release 6.0.x.
See the following features listed in
Table 2-1.
•
Speed Call Activation—1 Digit
•
Speed Call Activation—2 Digit
•
Group Speed Call—1 Digit
•
Group Speed Call—2 Digit
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2008 Cisco Systems, Inc. All rights reserved.
Information Relocated—Account and Authorization Codes, Speed Call, and MLHG for SIP Endpoints Feature
Link to Information in the Standard Documentation
Set
Information
Document Name
MLHG Support for SIP
Endpoints
http://www.cisco.com/en/US/docs/voice_ip_comm/b Cisco BTS 10200 Softswitch
ts/6.0/feature/description/fd6020sf.html#wp1739602 Network and Subscriber Feature
Descriptions Guide, Release 6.0.x.
MLHG Provisioning for SIP
Endpoints
http://www.cisco.com/en/US/docs/voice_ip_comm/b Cisco BTS 10200 Softswitch
ts/6.0/command/guide/chapter6_6.0_prov.html#wp1 Provisioning Guide, Release 6.0.x.
083768
Release 6.0
2