Solution Overview
IBM Server Solutions
Note: This webpage describes nonvirtualized “appliance” support for IBM servers. For
virtualization support, refer to http://www.cisco.com/go/uc-virtualized.
Cisco is introducing software applications from the Cisco® Unified Communications
portfolio that install on specific configurations of customer-provided IBM xSeries
x3650-M2 and x3250-M3 servers. Available applications include: Cisco Unified
Communications Manager, Cisco Emergency Responder, Cisco Unified Application
Environment, Cisco Unity® unified messaging, Cisco Unity Connection, Cisco Unified
Presence, Cisco Unified Mobility Advantage, Cisco Unified MeetingPlace®
conferencing, Cisco Unified MeetingPlace Express, Cisco Unified Contact Center
Express, Cisco Unified Contact Center Enterprise and Hosted, Cisco Unified
Intelligent Contact Management Enterprise and Hosted, Cisco Unified Customer
Voice Portal, Cisco Unified IP Interactive Voice Response (IP IVR), Cisco Unified
Intelligence Center, Cisco Unified Web Interaction Manager, Cisco Unified E-Mail
Interaction Manager, Cisco Unified Contact Center Management Portal, and Cisco
Unified Expert Advisor.
Cisco also supports the use of HP USB-attached tape drives as local backup devices for these servers. Refer to
the “HP Tape Drives” section later in this document for details and ordering instructions.
Note:
IBM no longer supports battery replacement on IBM servers, whether the battery is part of an IBM server
provided by the customer or a Cisco MCS 7800 server. Please visit this link for more details on IBM’s policy for
“consumable” components with limited useful lives:
http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=MIGR-5072280.
Customer-provided servers must exactly match the vendor, make, model, specifications, and parts lists in the
configurations listed in the following sections to be supported. Deviations are not supported, and may result in an
incomplete or failed install, or postinstallation problems. Customer-provided servers must also be on the certified
hardware compatibility list for the intended software product and version.
Where equivalent Cisco 7800 Media Convergence Server model numbers are given, they should be interpreted as
the configurations used by Cisco Unified Communications Manager. The same MCS model used for other
applications (where the MCS model has a different suffix) may use different components and specifications.
Contact your local Cisco account team for more details.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 29
Cisco no longer stocks memory and disk drive components for end-of-sale Cisco MCS 7800 models. Please
consult the parts lists in the “Older IBM Servers” section later in this document to get the IBM part numbers of
these components, and procure them direct from IBM. Remember to remove these parts if the Cisco Technical
Assistance Center (TAC) ever performs a return materials authorization (RMA) on the Cisco MCS 7800. If IBM no
longer has these parts available, then consider migrating to either a newer appliance or a virtualized solution as
described at http://www.cisco.com/go/uc-virtualized.
For purchasing questions not addressed in the following sections, please contact an IBM representative for your
country at: http://www.ibm.com/planetwide.
Cisco Approved Hardware Configuration Requirements
Table 1 lists supported platforms for the Cisco Unified Communications products listed previously. Note that the
Cisco MCS 7816 and MCS 7828 Media Convergence Servers do not have a software-only supported option.
For additional details about platform support for the following Cisco Unified Communications products, please
consult the following references:
●
For Cisco Emergency Responder, refer to the release notes at:
http://www.cisco.com/en/US/products/sw/voicesw/ps842/products_data_sheets_list.html.
●
For Cisco Unity Connection, please visit:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-491743.html.
●
For the Cisco Unity solution, please visit:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/product_data_sheet0900aecd
802132ef.html.
●
For Cisco Unified Mobility Advantage, refer to “Ordering Information” in the data sheet for Cisco Unified
Mobile Communicator at: http://www.cisco.com/en/US/products/ps7271/products_data_sheets_list.html.
●
For Cisco Unified Contact Center Express, please visit:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html.
●
For Cisco Unified Contact Center Enterprise, refer to Appendix A of the bill of materials at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_implementation_design_guides_list.ht
ml.
●
For Cisco Unified Customer Voice Portal, refer to the Cisco Unified Customer Voice Portal hardware and
software specifications at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1006/prod_technical_reference_list.html.
●
For Cisco Unified Presence hardware and software compatibility information, please visit:
http://www.cisco.com/en/US/products/ps6837/products_device_support_tables_list.html.
●
For the Cisco Unified Communications Management Suite, please visit: http://www.cisco.com/go/ucvirtualized.
Please contact IBM for hardware options for rack-mount kits, power supplies, and power cords (also note that
Cisco 7800 series Media Convergence Servers from Cisco no longer ship with cable management arms).Tables 2
and 3 list the IBM ordering instructions for the different hardware configurations. Note that although these special
“for Cisco” part numbers are available worldwide, they are not generally announced so will not show up in any
business partner catalogs or other locations on IBM’s general website. They are usually available through the IBM
online configurator tool at https://www-01.ibm.com/products/hardware/configurator/americas/bhui/launchNI.wss.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 29
Table 1.
Currently Supported Hardware Configurations
Customer-Provided IBM Hardware Configuration
(Equivalent to Cisco 7800 Model/Generation)
Equivalent Cisco HardwareIBM Label
Only Cisco 7800
Model/Generation Product IDs
IBM Part Number
IBM x3650-M2
MCS-7835-I3-IPC2
MCS-7835-I3 V05
7947-PNT
1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor
MCS-7835-I3-CXC1
MCS-7845-I3 V05
7947-PNU
MCS-7825-I5
4251-PAF
4GB RAM
2x 300GB Hard Drives
1 Quad-Core Intel 2.53GHz Intel Nehalem E5630 Processor
MCS-7845-I3-IPC2
6GB RAM
MCS-7845-I3-CXC1
4x 146GB Hard Drives
IBM x3250-M3
Single Intel X3430 2.4GHz Quad-Core Processor
4GB RAM
2x 250GB Hard Drives
MCS-7825-I5-IPC1
MCS-7825-I5-CCX1
MCS-7825-I5-CCE1
MCS-7825-I5-ECS1
MCS-7825-I5-RC1
MCS-7825-I5-MOB1
Table 2.
x3650-M2 Ordering Instructions from IBM
IBM x3650-M2
IBM Direct
Worldwide
Order IBM CSEO part number 7947-PML, 7947-PMK, 7947PMJ, 7947-PMH, or 7947-PNK by contacting an IBM sales
representative or the IBM Order Desk in your geography.
These single part numbers contains all required components
of the Cisco supported configuration.
IBM Reseller
*
IBM Contacts by Geography:
http://www.ibm.com/planetwide/
*
These part numbers are not generally announced, and are
only made available for purchase by customers of these Cisco
solutions.
Table 3.
IBM Business Partner Locator:
http://d03bphrb.partner.boulder.ibm.com/bpconnections
/bpcms.nsf/PublicSearchGUI?OpenFrameset&NL=en
Note that since this is a custom “for Cisco” model, business
partners may need to create a new part number in their ordering
system to match the special IBM part numbers above.
x3250-M3 Ordering Instructions from IBM
IBM x3250-M3 IBM Direct
Worldwide
*
Order IBM CSEO part number 7947-PML, 7947-PMK, 7947PMJ, 7947-PMH, or 7947-PNK by contacting an IBM business
partner. These single part numbers contains all required
components of the Cisco supported configuration.
IBM Reseller
*
Order IBM CSEO part number 4251-PAF by contacting an
IBM sales representative or the IBM Order Desk in your
geography. This single part number contains all required
components.
IBM Contacts by Geography:
http://www.ibm.com/planetwide/
*
These part numbers are not generally announced, and are
only made available for purchase by customers of these Cisco
solutions.
*
Order IBM CSEO part number 4251-PAF by contacting an IBM
business partner. This single part number contains all required
components.
IBM Business Partner Locator:
http://d03bphrb.partner.boulder.ibm.com/bpconnections/
bpcms.nsf/PublicSearchGUI?OpenFrameset&NL=en
Note that since this is a custom “for Cisco” model, business
partners may need to create a new part number in their ordering
system to match the special IBM part numbers above.
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 4 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 29
Table 4.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PML
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)
2
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
2
Standard
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
IBM x3650-M2 Server with Single Quad-Core E5630 2.53-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 5 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 5.
Hardware for IBM x3650-M2 with Intel Quad-Core E5630 2.53-GHz Processor and 300-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PMK
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
or Intel Xeon Processor E5630 (2.53 GHz)
3
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
4
Standard
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 29
IBM x3250-M3 with Single Intel X3430 2.4-GHz Quad-Core Processor
The IBM x3250 M3 is a high-performance server platform for today's unified communications applications. When
configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to
4,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of
memory is provided.
Table 6 lists the components that must be configured and will ship when you order this system. Note that
additional parts are required but are not listed. These parts will automatically be configured and may also vary by
country (power cords, documentation, etc.).
Table 6.
Hardware for IBM x3250 M3 with Single Intel X3430 2.4-GHz Quad-Core Processor
Quantity
IBM Part Number (Worldwide)
Description
1
4251-PAF
IBM System x3250 M3
1
Standard
Base Hardware/Fixed PSU
1
Standard
Quad-Core Intel Xeon X3430 (2.4GHz/1333MHz-8MB Cache)
2
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
Simple Swap SATA RAID Kit 3.5"
1
Standard
ServeRAID-BR10il SAS/SATA Controller v2
2
Standard
250GB 7200 RPM 3.5" Simple-Swap SATA II
1
Standard
Internal SATA RAID - Cabled Only, Setup by Customer
1
Standard
Riser Assembly PCI-E
1
Standard
IBM UltraSlim Enhanced SATA Multi-Burner
1
Standard
8GB USB Key (Small Form Factor) fpr Cisco Unified Communications Solution
Older IBM Servers
If you are using older IBM servers and want to upgrade to newer software releases, refer to Table 7 for a list of
older configurations that are still supported. Note that IBM has discontinued these models and you can no longer
purchase them from IBM or its resellers. Please contact your local Cisco account team for information about
replacement models and ordering assistance.
Table 7.
Older Supported Hardware Configurations (Not Shipping)
Customer-Provided IBM Hardware Configuration (Equivalent to
Cisco 7800 Model/Generation)
Equivalent Hardware-Only Cisco 7800 Model/Generation Product
IDs
IBM x3650-M2
MCS-7835-I3-IPC1 (MCS 7835-I3 V01-V04 CUCM variant)
1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor
MCS-7835-I3-CCX1
4GB RAM
MCS-7835-I3-CCE1
2x 146GB Hard Drives
1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 or E5630 Processor
MCS-7845-I3-IPC1 (MCS 7845-I3 V01-V04 CUCM variant)
6GB RAM
MCS-7845-I3-CCX1
4x 146GB Hard Drives
MCS-7845-I3-CCE1
IBM x3650-M2 with DC Power
N/A
1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor
6GB RAM
4x 146GB Hard Drives
1 Quad-Core Intel 2.00GHz Intel Nehalem E5504 Processor
MCS-7835-I3-ECS1 (MCS 7835-I3 V01-V04 messaging variant)
4GB RAM
2x 300GB Hard Drives
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 29
Customer-Provided IBM Hardware Configuration (Equivalent to
Cisco 7800 Model/Generation)
Equivalent Hardware-Only Cisco 7800 Model/Generation Product
IDs
2 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor
MCS-7845-I3-ECS1 (MCS 7845-I3 V01-V04 messaging variant)
8GB RAM
MCS-7845-I3-MOB1
4x 300GB Hard Drives
MCS-7845-I3-CCE2
IBM x3650-M2
MCS-7835-I3-IPC1
1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor
MCS-7835-I3-CCX1
4GB RAM
MCS-7835-I3-CCE1
2x 146GB Hard Drives
IBM x3650-M2
MCS-7845-I3-IPC1
1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor
MCS-7845-I3-CCX1
6GB RAM
MCS-7845-I3-CCE1
4x 146GB Hard Drives
IBM x3650-M2
MCS-7835-I3-ECS1
1 Quad-Core Intel 2.00GHz Intel NehalemE5504 Processor
4GB RAM
2x 300GB Hard Drives
IBM x3650-M2
MCS-7845-I3-ECS1
2 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor
MCS-7845-I3-MOB1
8GB RAM
MCS-7845-I3-CCE2
4x 300GB Hard Drives
x3650 Server
2x Xeon 5140 2.33GHz Processor
4GB RAM
4x 72GB Hard Disk
MCS-7845-I2-IPC1
MCS-7845-I2-CCE1
MCS-7845-I2-CCX1
MCS-7845-I2-ECS2 (4x146GB hard disk)
MCS-7845-I2-ECS1 (8x72GB hard disk)
x346 or 346r Server
2x Xeon 3.4GHz Processor
4GB RAM
4x 72GB Hard Disk
MCS-7845-I1-IPC1
MCS-7845-I1-CC1
MCS-7845-I1-ECS2
MCS-7845-I1-ECS1 (4x72GB and 2x144GB hard disk configuration)
x345 Server
2x Xeon 3.06GHz Processor
4GB RAM
4x 72GB Hard Disk
MCS-7845I-3.0-IPC1
MCS-7845I-3.0-CC1
MCS-7845I-3.0-ECS2 (4x36GB hard disk)
MCS-7845I-3.0-ECS1 (4x36GB and 2x72GB hard disks)
x3650 Server
Single Xeon 5140 2.33GHz Processor
2GB RAM
2x 72GB Hard Disk
MCS-7835-I2-IPC1
MCS-7835-I2-CCE1
MCS-7835-I2-CCX1
MCS-7835-I2-ECS1
x346 Server
Single Xeon 3.4GHz Processor
2GB RAM
2x 72GB Hard Disk
MCS-7835-I1-IPC1
MCS-7835-I1-CC1
MCS-7835-I1-ECS1
x345 Server
Single Xeon 2.4 or 3.0GHz Processor
1GB RAM
2x 36GB Hard Disk
MCS-7835I-2.4-EVV1
MCS-7835I-3.0-IPC1
MCS-7835I-3.0-ECS1
IBM x3250-M2
Single Intel E3110 3.0GHz Dual-Core Processor (Note: MCS
equivalent uses long-life equivalent CPU model E8400)
2G RAM
2x 250GB Hard Drives
MCS-7825-I4-IPC1
IBM Part Number: 4190-PAF
MCS-7825-I4-RC1
MCS-7825-I4-CCX1
MCS-7825-I4-CCE1
MCS-7825-I4-ECS1
MCS-7825-I4-MOB1
x3250 Server
Single Intel 3050 Xeon 2.13GHz
2GB RAM
2x 160GB Hard Disk
MCS 7825-I3-IPC1
MCS-7825-I3-CCE1
MCS-7825-I3-CCX1
MCS-7825-I3-ECS1
x306m Server
Single Intel 950 3.4GHz
2GB RAM
80GB Hard Disk
MCS 7825-I2-IPC2
MCS-7825-I2-ECS1
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 29
Customer-Provided IBM Hardware Configuration (Equivalent to
Cisco 7800 Model/Generation)
Equivalent Hardware-Only Cisco 7800 Model/Generation Product
IDs
x306m Server
Single Pentium D 2.8GHz
2GB RAM
80GB Hard Disk
MCS-7825-I2-IPC1
MCS-7825-I2-CCE1
MCS-7825-I2-CCX1
x306 Server
Single Pentium 4 3.4GHz
2GB RAM
80GB Hard Disk
MCS-7825-I1-IPC1
MCS-7825-I1-CC1
MCS-7825-I1-ECS1
x306 Server
Single Pentium 4 3.06GHz
1GB RAM
80GB Hard Disk
MCS-7825I-3.0-IPC1
MCS-7825I-3.0-IPC2
MCS-7825I-3.0-CC1
MCS-7825I-3.0-ECS1
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 8 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 8.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PML
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)
2
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
2
Standard
IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
IBM x3650-M2 Server with Single Quad-Core E5540 or E5630 Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 9 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 29
Table 9.
Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PMK
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
or Intel Xeon Processor E5630 (2.53 GHz)
3
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
4
Standard
IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging
products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 10 lists the
components that must be configured and will ship when you order this system. Note that additional parts are
required but are not listed. These parts will automatically be configured and may also vary by country (power
cords, documentation, etc.).
Table 10.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PMJ
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)
2
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
2
Standard
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 29
IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and
300-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and
Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core
E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided
(note that some product versions may require more memory). Table 11 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 11.
Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PMH
IBM System x3650 M2
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
1
Standard
Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
4
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
4
Standard
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
IBM x3650-M2 Server (DC Power) with Single Quad-Core E5540 2.53-GHz Processor and
146-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications,
and it is now available with DC power. When configured properly for Cisco Unified Communications Manager, up
to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory
configuration is required as long as 6 GB of memory is provided. Table 12 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 12.
Hardware for IBM x3650-M2 (DC Power) with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
IBM Part Number (Worldwide)
Description
1
7947-PNK
IBM System x3650 M2
1
Standard
IBM System x3650 M2 Base with DC power supply
1
Standard
System Common planar for 1U/2U
1
Standard
Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
3
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
1
Standard
ServeRAID-MR10i SAS/SATA Controller
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 29
Quantity
IBM Part Number (Worldwide)
Description
1
Standard
ServeRAID-MR10i Li-Ion Battery
1
Standard
8 HDD Enablement Kit
4
Standard
IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
Standard
IBM 675W Redundant -48V DC Power Supply
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
Standard
IBM Virtual Media Key
1
Standard
8GB USB Key for Cisco Unified Communications Solution
IBM x3250 M2 with Single Intel Xeon E3110 3.0-GHz Processor
The IBM x3250 M2 is a high-performance server platform for today's unified communications applications. When
configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to
4,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of
memory is provided.
Table 13 lists the components that must be configured and will ship when you order this system. Note that
additional parts are required but are not listed. These parts will automatically be configured and may also vary by
country (power cords, documentation, etc.).
Table 13.
Quantity
*
Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor
IBM Part Number (Worldwide)
*
Description
1
4190-PAF
IBM System x3250 M2
1
Standard
Dual-Core Intel Xeon E3110 (3.0GHz 1333MHz FSB, 6MB L2)
1
Standard
Refresh 1 Base
2
Standard
1GB DDR2 800 SDRAM UDIMM Memory
1
Standard
Simple Swap SATA RAID Kit 3.5"
2
Standard
250GB 7200 RPM 3.5" Simple-Swap SATA II
1
Standard
Internal SATA RAID - Cabled Only, Setup by Customer
1
Standard
Riser Assembly PCI-E
1
Standard
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
This single part number includes all the required components.
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 14 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 29
Table 14.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
1
7947-22Y
7947-AC1
7947-CTO
IBM System x3650 M2
1
Standard
5653
44E5176
System Common planar for 1U/2U
1
Standard
6990
46M1035
Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)
*
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
Description
2
44T1481
3964
44T1471
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP
RDIMM
1
43W4296
3571
43W4298
ServeRAID-MR10i SAS/SATA Controller
1
44E8826
5864
44E8840
ServeRAID-MR10i Li-Ion Battery
1
Standard
7553
44X0104
8 HDD Enablement Kit
2
42D0632
5537
42D0634
IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
4162
44W3252
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
46M1075
2100
44X0147
IBM 675W Redundant Power Supply
1
Standard
5086
44X0138
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
3734
46M1131
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
46C7526
5080
43V6923
IBM Virtual Media Key
1
41Y8260
9298
41Y8273
8GB USB Key for Cisco Unified Communications Solution
*
7947-22Y is a worldwide Generally Available Variant (GAV) model number that is not orderable as listed and needs to be
modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part
number for 7947-22Y is 7947-22U. See the product-specific official IBM announcement letter for other country-specific GAV
model numbers. GAV-to-MTM mapping for Asia Pacific geographies follow the same pattern - substitute the last character with
the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Single Quad-Core E5540 2.53-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 15 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 15.
Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
1
7947-62Y
7947-AC1
7947-CTO
IBM System x3650 M2
1
Standard
5653
44E5176
System Common planar for 1U/2U
1
Standard
6993
46M1038
Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz
80w)
3
44T1481
3964
44T1471
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP
RDIMM
1
Standard
3571
43W4298
ServeRAID-MR10i SAS/SATA Controller
1
Standard
5864
44E8840
ServeRAID-MR10i Li-Ion Battery
1
Standard
7553
44X0104
8 HDD Enablement Kit
*
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
Page 11 of 29
Quantity
Part Number
(IBM Reseller,
Worldwide)
Part Number
(IBM Direct,
US/CAN/LA)
Part Number
(IBM Direct,
EMEA/AP)
Description
4
42D0632
5537
42D0634
IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
4162
44W3252
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
46M1075
2100
44X0147
IBM 675W Redundant Power Supply
1
Standard
5086
44X0138
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
3734
46M1131
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
46C7526
5080
43V6923
IBM Virtual Media Key
1
41Y8260
9298
41Y8273
8GB USB Key for Cisco Unified Communications Solution
*
7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U.
See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging
products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 16 lists the
components that must be configured and will ship when you order this system. Note that additional parts are
required but are not listed. These parts will automatically be configured and may also vary by country (power
cords, documentation, etc.).
Table 16.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
1
7947-22Y
7947-AC1
7947-CTO
IBM System x3650 M2
1
Standard
5653
44E5176
System Common planar for 1U/2U
1
Standard
6990
46M1035
Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)
*
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
Description
2
44T1481
3964
44T1471
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP
RDIMM
1
43W4296
3571
43W4298
ServeRAID-MR10i SAS/SATA Controller
1
44E8826
5864
44E8840
ServeRAID-MR10i Li-Ion Battery
1
Standard
7553
44X0104
8 HDD Enablement Kit
2
42D0637
5599
42D0639
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
4162
44W3252
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
46M1075
2100
44X0147
IBM 675W Redundant Power Supply
1
Standard
5086
44X0138
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
3734
46M1131
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
46C7526
5080
43V6923
IBM Virtual Media Key
1
41Y8260
9298
41Y8273
8GB USB Key for Cisco Unified Communications Solution
*
7947-22Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-22Y is 7947-22U.
See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for A.P. Geographies follow the same pattern - substitute the last character with the country-specific designator.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 29
**
This is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically
be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and
300-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and
Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core
E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided
(note that some product versions may require more memory). Table 17 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 17.
Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
1
7947-62Y
7947-AC1
7947-CTO
IBM System x3650 M2
1
Standard
5653
44E5176
System Common planar for 1U/2U
1
Standard
6993
46M1038
Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz
80w)
1
46M1084
7752
46M1042
Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
4
44T1481
3964
44T1471
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP
RDIMM
1
Standard
3571
43W4298
ServeRAID-MR10i SAS/SATA Controller
1
Standard
5864
44E8840
ServeRAID-MR10i Li-Ion Battery
1
Standard
7553
44X0104
8 HDD Enablement Kit
4
42D0637
5599
42D0639
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD
1
Standard
4162
44W3252
UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo
1
46M1075
2100
44X0147
IBM 675W Redundant Power Supply
1
Standard
5086
44X0138
IBM System x3650 M2 PCI-Express (2x8) Riser Card
1
Standard
3734
46M1131
IBM System x3650 M2 PCI-Express (2x8) Riser Card 2
1
46C7526
5080
43V6923
IBM Virtual Media Key
1
41Y8260
9298
41Y8273
8GB USB Key for Cisco Unified Communications Solution
*
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part
Number0020
(IBM Direct,
EMEA/AP)
**
Description
*
7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U.
See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650 with Single Intel 5140 2.33-GHz Processor and 146-GB Hard Drives
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB
of memory is provided (note that some product versions may require more memory).
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 29
Note that IBM has discontinued sale of this configuration. Table 18 is only for reference to help you identify which
configuration you have deployed.
Table 18.
Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor and 146-GB Hard Drives
Quantity
IBM Part Number
(North America)
IBM Part Number
(Outside North
America)
Description
1
7979-AC1
7979-CTO
IBM System x3650
1
1325
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
2 or 4
0542
39M5783
1GB PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
25R8077
IBM ServeRAID 8k SAS Controller
2
5534
43X0826
IBM 146GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
40K0028
PCI-Express Riser Card
1
1606
39R9504
Remote Supervisor Adapter II Slimline
*
**
*
Quantity 2 required for Cisco Unified Communications Manager models MCS-7835-I2-IPC2, MCS-7835-I2-CMA2, MCS 7835 I2
CMB1, MCS-7835-I2-CMB2, and MCS-7835-I2-CMC1 as well as Cisco Contact Center models MCS-7835-I2-CCX2 and MCS
7835-I2-CCE2
**
Quantity 4 required for Cisco Unity Connection models MCS 7835I2-K9-UCA1A and MCS 7835I2-K9-UCB1
IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives
The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified
Communications Software applications. When configured properly for Cisco Unified Communications Manager, up
to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory
configuration is required as long as 4 GB of memory is provided (note that some product versions may require
more memory).
Note that IBM has discontinued sale of this configuration. Table 19 is only for reference to help you identify which
configuration you have deployed.
Table 19.
Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives
Quantity
IBM Part Number
(North America)
IBM Part Number
(Outside North
America)
Description
1
7979-AC1
7979-CTO
IBM System x3650
1
1325
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
1
1383
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
4
0542
39M5783
1GB PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
25R8077
IBM ServeRAID 8k SAS Controller
4
5534
43X0826
IBM 146GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
40K0028
PCI-Express Riser Card
1
1606
39R9504
Remote Supervisor Adapter II Slimline
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 29
IBM x3650 Dual Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
The IBM x3650 dual-processor quad-core configured server is a robust server solution designed for Cisco Unity
and Cisco Unified Contact Center applications. The required processors are dual Intel Xeon Quad-Core 5345
2.33-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided (note
that some product versions may require more memory).
Note that IBM has discontinued sale of this configuration. Tables 20 and 21 are only for reference to help you
identify which configuration you have deployed.
Table 20.
Hardware Variation 1 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
(Equivalent of Cisco MCS7845-I2-ECS3 and MCS-7845-I2-CCE3)
Quantity
IBM Part Number
(North America)
1
7979-AC1
7979-CTO
IBM System x3650
1
2816
43W5827
Quad-Core Intel Xeon Processor E5345 (2.33GHz 8MB L2 1333MHz 80w)
1
3457
43W5819
Additional Quad-Core Intel Xeon Processor E5345 (2.33GHz 1333MHz 80w)
4
0542
39M5783
1GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz
1
1670
25R8077
IBM ServeRAID-8k SAS Controller
4
5534
43X0826
146GB 10K 2.5" Hot-Swap SAS HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
xSeries 835W Redundant Power Option
1
4334
40K0028
PCI-Express Riser Card
1
1606
39R9504
Remote Supervisor Adapter II Slimline
*
IBM Part Number
(Outside North
America)
*
Description
*
This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
146-GB hot-swap single-attachment-station (SAS) drives, and all the other components itemized in Table 20. Note: Additional
parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country
(power cords, documentation, etc.).
Table 21.
Hardware Variation 2 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
(Equivalent of Cisco MCS7845-I2-ECS4 and MCS-7845-I2-CCE4)
Quantity
IBM Part Number
(North America)
1
7979-AC1
7979-CTO
IBM System x3650
1
2816
43W5827
Quad-Core Intel Xeon Processor E5345 (2.33GHz 8MB L2 1333MHz 80w)
1
3457
43W5819
Additional Quad-Core Intel Xeon Processor E5345 (2.33GHz 1333MHz 80w)
4
0542
39M5783
1GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz
1
1670
25R8077
IBM ServeRAID-8k SAS Controller
8
5534
43X0826
146GB 10K 2.5" Hot-Swap SAS HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
xSeries 835W Redundant Power Option
1
4334
40K0028
PCI-Express Riser card
1
1606
39R9504
Remote Supervisor Adapter II Slimline
*
IBM Part Number
(Outside North
America)
*
Description
*
This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, eight
146-GB hot-swap SAS drives, and all the other components itemized in Table 21. Note: Additional parts are required but are not
listed in Table 21. These parts will automatically be configured and may also vary by country (power cords, documentation).
You can add additional memory to the x3650 systems using the following parts:
46C7418: 2GB (2x1GB) Single Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
46C7419: 4GB (2x2GB) Dual Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 29
46C7420: 8GB (2x4GB) Quad Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
IBM x3250 M2 with Single Intel Xeon E3110 3.0-GHz Processor
The IBM x3250 M2 is a high-performance server platform for today’s unified communications applications. When
configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to
4,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of
memory is provided.
Note that IBM has discontinued sale of this configuration. Table 22 is only for reference to help you identify which
configuration you have deployed.
Table 22.
Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor
Quantity
IBM Part Number
(North America)
1
4190-AC1 or
4194-AC1
4190-CTO or
4194-CTO
IBM System x3250 M2
1
3650
44R5766
Dual-Core Intel Xeon E3110 (3.0GHz 1333MHz FSB, 6MB L2)
1
2749
44X1885
Refresh 1 Base
2
3961
46C7424
1GB DDR2 800 SDRAM UDIMM Memory
1
2773
43V7424
Simple Swap SATA RAID Kit 3.5"
2
5292
39M4509
250GB 7200 RPM 3.5" Simple-Swap SATA II
1
9011
32P8874
Internal SATA RAID - Cabled only, Setup by Customer
1
4911
44T2004
Riser assembly PCI-E
1
4162
44W3252
UltraSlim Enhanced CD-RW/DVD-ROM Combo
*
IBM Part Number
(Outside North
America)
*
Description
*
The 4190 machine time carries a 1-year limited parts and labor warranty. The 4194 machine type carries a 3-year limited parts
and labor warranty.
IBM x3650 Single Intel 5140 2.33-GHz Processor with 73-GB Hard Drives
This server configuration is identical to the IBM x3650 server with a single Intel 5140 2.33-GHz processor and 146GB hard drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP
Telephony OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS
7835-I2.
Note that IBM has discontinued sale of this configuration. Table 23 is only for reference to help you identify which
configuration you have deployed.
Table 23.
Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor with 73-GB Hard Drives
Quantity
IBM Part Number
(North America)
1
7979-AC1
7979-CTO
IBM System x3650
1
1325
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
2
0542
39M5783
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
25R8077
IBM ServeRAID 8k SAS Controller
2
5159
40K1084
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
40K0028
PCI-Express Riser Card
*
IBM Part Number
(Outside North
America)
*
Description
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 29
1
1606
39R9504
Remote Supervisor Adapter II Slimline
*
This IBM build-to-order model must be configured with the Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 23. Note: Additional parts are required but are not
listed in Table 23. These parts will automatically be configured and may also vary by country (power cords and documentation).
IBM x3650 with Dual Intel 5140 2.33-GHz Processors with 73-GB Hard Drives
This server configuration is identical to the IBM x3650 with dual Intel 5140 2.33-GHz processors with 146-GB hard
drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP Telephony
OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Table 24 is only for reference to help you identify which
configuration you have deployed.
Table 24.
Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors
Quantity
IBM Part Number
(North America)
1
7979-AC1
7979-CTO
IBM System x3650
1
1325
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
1
1383
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
4
0542
39M5783
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
25R8077
IBM ServeRAID 8k SAS Controller
4
5159
40K1084
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
40K0028
PCI-Express Riser card
1
1606
39R9504
Remote Supervisor Adapter II Slimline
*
IBM Part Number
(Outside North
America)
*
Description
*
This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 24. Note: Additional parts are required but are not
listed in Table 24. These parts will automatically be configured and may also vary by country (power cords and documentation).
IBM xSeries 306 with Intel Pentium 4 Xeon 3.06-GHz Processor
The IBM xSeries 306 is a robust server solution designed for Cisco Unified Communications Software
applications. As many as 1,000 Cisco Unified IP Phones can be supported by a single x306 server running Cisco
Unified Communications Manager. When clustered properly, as many as 4,000 users can be supported. The
required processor is an Intel Pentium 4 Xeon 3.06-GHz processor. No specific memory configuration is required
as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 25 is only for reference to help you identify which
configuration you have deployed.
Table 25.
Hardware for IBM xSeries 306 with Intel Pentium 4 Xeon 3.06-GHz Processor
Quantity
IBM Part Number
Description
1
8836-2SU
IBM x306 Server 3.0GHz/800MHz FSB SATA
1
06P4054
512MB PC2700 ECC DDR SDRAM UDIMM
1
22P7047
8X Slim line DVD-ROM
1
73P8002
80GB 7200-rpm SATA HDD
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 29
IBM xSeries 306 with Intel Pentium 4 3.4-GHz Processor
This processor requires the Cisco OS 2000.4.1b, which shipped on October 3, 2005.
The IBM xSeries 306 is a high-performance server platform for today’s unified communications applications. It
supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when
clustered properly. The required processor is an Intel Pentium 4 3.4-GHz processor. No specific memory
configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 26 is only for reference to help you identify which
configuration you have deployed.
Table 26.
Hardware for IBM xSeries 306 with Intel Pentium 3.4-GHz Processor
Quantity
IBM Part Number
Description
1
8836-2SU
IBM x306 Server 3.0GHz/800MHz FSB SATA
1
06P4054
512MB PC2700 ECC DDR SDRAM UDIMM
1
22P7047
8X Slim line DVD-ROM
1
73P8002
80GB 7200-rpm SATA HDD
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8836-5SY is 8836-5SU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers.
GAV-to-MTM mapping for Latin America and Asia Pacific geographies: 1Mx > 11X, 1Sx > 15X, 2Mx > 21X, 2Sx > 25X, 4MY >
41X, 4SY > 45X, 5MY > 51X, and 5SY > 55X. Latin America and Asia Pacific models 4xX and 5xY will need the last digit (X)
substituted with a country-specific designator. For example, model 31X may become 31L. Please note that Asia Pacific and Latin
America models of the 8836-5SY are not supported on OS 2000.4.1b. For those countries, use the x306 3.06-GHz 8836-2SY
model listed and OS 2000.2.7.
IBM xSeries 306m with Intel Pentium D 2.8-GHz Processor
This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM
xSeries 306m is a high-performance server platform for today’s unified communications applications. It supports
up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered
properly. The required processor is an Intel Pentium D 2.8-GHz processor. No specific memory configuration is
required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco 7825-I2IPC1.
Note that IBM has discontinued sale of this configuration. Table 27 is only for reference to help you identify which
configuration you have deployed.
Table 27.
Hardware for IBM xSeries 306m with Intel Pentium D 2.8-GHz Processor
Quantity
IBM Part Number
Description
1
8849-G2Y or 8491-G2Y*
x306m, Intel PD 2.8GHz/800MHz, 2 x 2MB Layer 2, 2x 512MB, O/Bay SS S-ATA, 24x-10x, 350W p/s,
Rack
2
30R5148
512MB PC2-4200 (1 x 512MB) ECC DDR2 SDRAM DIMM
1
39Y6824
IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive
2
39M4500
80GB S-ATA Simple-swap 3Gb/s HDD
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8849-G2Y is 8849-G2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 29
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last
character with the country-specific designator.
IBM xSeries 306m with Intel 950 3.4-GHz Processor
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0.
The IBM xSeries 306m is a high-performance server platform for today’s unified communications applications. It
supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when
clustered properly. The required processor is an Intel 950 3.4-GHz processor. No specific memory configuration is
required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS
7825-I2-IPC2.
Note that IBM has discontinued sale of this configuration. Table 28 is only for reference to help you identify which
configuration you have deployed.
Table 28.
Hardware for IBM xSeries 306m with Intel 950 3.4-GHz Processor
Quantity
IBM Part Number
Description
1
8849-K2Y or
8491-K2Y* or
**
8849-AC1 or
**
8491-AC1
Express x306m, Intel PD 950, 3.4GHz/800MHz, 4MB Layer 2, 2 x 512MB, O/Bay SS S-ATA, 24x-10x,
350W p/s, Rack
2
30R5148
512MB PC2-4200 (1 x 512MB) ECC DDR2 SDRAM DIMM
1
39Y6824
IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive
2
39M4500
80GB S-ATA Simple-swap 3Gb/s HDD
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8849-K2Y is 8849-K2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last
character with the country-specific designator.
**
This IBM build-to-order model must be configured with an Intel 950 3.4-GHz processor, 2-GB RAM, two 80-GB simple-swap
Serial ATA (SATA) drives, and IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive. Use of this model requires an IBM
technician to reset the MTM to 8849-K2Y if Cisco Unified Communications Manager 5.1 is being installed. The 8849 machine
type carries a 1-year limited parts and labor warranty. The 8491 machine type carries a 3-year limited parts and labor warranty.
IBM x3250 with Intel 3050 Xeon 2.13-GHz Processor
This processor requires Cisco Windows OS 2000.4.5 or OS 2003.1.2 or Cisco Unified Communications Manager
6.0.1. This server is not supported in Cisco Unified Communications Manager 5.0. It is the configuration equivalent
of the Cisco MCS 7825-I3.
The IBM x3250 is a high-performance server platform for today’s unified communications applications. It supports
up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered
properly. The required processor is an Intel Dual-Core 3050 Xeon 2.13-GHz processor. No specific memory
configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 29 is only for reference to help you identify which
configuration you have deployed.
Table 29.
Quantity
1
Non-Country-Specific Hardware for IBM x3250 with Intel 3050 Xeon 2.13-GHz Processor*
IBM Type-Model Feature
**
4364-AC1 or 4365-AC1
Description
IBM System x3250
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 19 of 29
Quantity
IBM Type-Model Feature
Description
1
0992
CPU Retention Module
1
1128
x3250 Revision 1 System Planar
1
1272
Dual Core Intel Xeon 3050 (2.13GHz/2M L2)
2
1903
1GB DDR2 667 SDRAM DIMM Memory
1
2007
BIOS GBM
1
2046
Front Bezel
1
2088
3.5inch DASD Cage
2
2091
SATA Filler 3.5inch
1
2268
Base Hardware
1
4144
CDRW/DVD Combo V UltraBay Enhanced
1
4256
Rack Mount Kit
1
4367
Simple Swap SATA RAID Kit
2
5291
160GB 7200 RPM 3.5inch Simple Swap SATA HDD
1
9011
Internal RAID - Cabled Only - Setup by Customer
*
This table lists common hardware for the supported server model and does not include power cables and country-specific
items. The IBM build-to-order tool should automatically include the required country-specific parts for the order. This model must
be configured with an Intel Dual-Core 3050 Xeon 2.13-GHz processor, 2-GB RAM, two 160-GB simple-swap SATA drives, and
an IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive.
**
The 4364 machine time carries a 1-year limited parts and labor warranty. The 4365 machine type carries a 3-year limited parts
and labor warranty.
IBM xSeries 330 with Intel Pentium III 800-MHz Processor
The xSeries 330 is a high-performance server platform designed for today’s unified communications applications.
When clustered properly, 2,000 users can be supported. The minimum required processor is an Intel Pentium III
800-MHz processor. No specific memory configuration is required as long as 512 MB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 30 is only for reference to help you identify which
configuration you have deployed.
Table 30.
Hardware for IBM xSeries 330 with Intel Pentium III 800-MHz Processor
Quantity
IBM Part Number
Description
1
865451Y
IBM x330 Server 1000MHz/256 256/Open 24X
1
37L7205
18.2 Ultra 160 SCSI HS SL HD
1
10K0020
256MB ECC SDRAM RDIMM Memory
1
06P4792
xSeries Cable Chain Tech Kit
Other supported processors are listed as follows. Replace part number 865451Y with one of the following.
1
865411Y
IBM x330 800MHz/256 256/Open 24X
1
865431Y
IBM x330 866MHz/256 256/Open 24X
1
865441Y
IBM x330 933MHz/256 256/Open 24X
IBM xSeries 330 with Intel Pentium III 1.2-GHz Processor
The IBM xSeries 330 is a high-performance server platform designed for today’s unified communications
applications. As many as 500 Cisco Unified IP Phones can be supported on a single x330 server running Cisco
Unified Communications Manager. When clustered properly, 2,000 users can be supported.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 29
Note that IBM has discontinued sale of this configuration. Table 31 is only for reference to help you identify which
configuration you have deployed.
Table 31.
Hardware for IBM xSeries 330 with Intel Pentium III 1.2-GHz Processor
Quantity
IBM Part Number
Description
1
867431X
x330 1.26GHz/133 256M
1
10K0020
256MB DIMM
1
06P5754
18GB Ultra 160 10K Wap HD
1
06P4792
Cable Chain Kit
IBM xSeries 340 with Intel Pentium III 1-GHz Processor
The IBM xSeries 340 is a robust server solution designed for Cisco Unified Communications Software
applications. When clustered properly, 10,000 users can be supported. The required processor is an Intel Pentium
III 1-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 32 is only for reference to help you identify which
configuration you have deployed.
Table 32.
Hardware for IBM xSeries 340 with Intel Pentium III 1-GHz Processor
Quantity
IBM Part Number
Description
1
86566RY
IBM x340 1000MHz/256 128/Open 24X
2
37L7205
18.2 Ultra 160 SCSI HS SL HD
1
10K0018
128MB ECC SDRAM RDIMM
1
10K0020
256MB ECC SDRAM RDIMM
1
10K0022
512MB ECC SDRAM RDIMM
1
06P5740
ServerRAID-4Lx Ultra 160 SCSI
1
37L6880
270W Redundant Power Supply
1
00N7991
20/40GB DDS/4 4-mm Int Tape Drive (Optional)
1
86566RY
IBM x340 1000MHz/256 128/Open 24X
IBM xSeries 342 with Intel Pentium III 1.26-GHz Processor
The IBM xSeries 342 is a robust server solution designed for Cisco Unified Communications Software
applications. When clustered properly, 10,000 users can be supported. The required processor is an Intel Pentium
III 1.26-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 33 is only for reference to help you identify which
configuration you have deployed.
Table 33.
Hardware for IBM xSeries 342 with Intel Pentium III 1.26-GHz Processor
Quantity
IBM Part Number
Description
1
86694RX
IBM x342 1.26GHz/133MHz
2
33L3324
512MB DIMM
2
06P5754
18GB Ultra 160 10K Hot-Swap HD
1
06P5740
ServeRAID 4Lx
1
37L6880
270W Hot-Swap Power Supply
1
00N7991
20/40GB DAT) Drive (Optional)
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 21 of 29
1
10K2340
Media Bay Tray/LVD Cable Kit (Required for Tape Drive)
IBM xSeries 345 with Intel Pentium 4 Xeon 2.4-GHz Processor
The xSeries 345 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2,500 Cisco Unified IP Phones can be supported by a single x345 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Pentium 4 Xeon 2.4-GHz processor. No specific memory configuration is required as long as
1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 34 is only for reference to help you identify which
configuration you have deployed.
Table 34.
Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 2.4-GHz Processor
Quantity
IBM Part Number
Description
1
867031X
IBM x345 512MB, CD-ROM
2
33L5037
256MB DIMM
1
25P3492
ServeRAID-5i SCSI Controller
2
06P5755
36GB Ultra 160 10K Hot-Swap HD
1
22P7047
8X Max Slimline DVD-ROM Drive
1
59P4057
350W H/Swap Redundant Power Supply
IBM xSeries 345 with Intel Pentium 4 Xeon 3.06-GHz Processor
The xSeries 345 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2,500 Cisco Unified IP Phones can be supported by a single x345 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Pentium 4 Xeon 3.06-GHz processor. No specific memory configuration is required as long
as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 35 is only for reference to help you identify which
configuration you have deployed.
Table 35.
Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 3.06-GHz Processor
Quantity
IBM Part Number
Description
1
867071X or 8670M1X
x345 Xeon 3.06GHz/533MHz, 512KB, 512MB, OB, Ultra 320
2
33L5037
256MB DIMM
1
25P3492 or 13N2190
ServeRAID-5i SCSI Controller or ServeRAID-6i+
2
32P0726
36GB Ultra 320 10K Hot-Swap HD
1
22P7047
8X Max Slimline DVD-ROM Drive
1
74P4965
514W H/Swap Power Supply (Non-North American Part Number is 74P4955)
IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
This processor requires Cisco OS 2000.2.7.
The IBM xSeries 346 is a robust server solution designed for Cisco Unified Communications Software
applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x346 server running Cisco
Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 22 of 29
required processor is an Intel Pentium Xeon 3.4-GHz processor. No specific memory configuration is required as
long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 36 is only for reference to help you identify which
configuration you have deployed.
Table 36.
Quantity
Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
IBM Part Number
*
Description
1
8840-31Y
IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, rack
1
73P3522
2 x 512MB PC2-3200 ECC DDR2 Non Chipkill SDRAM RDIMM Kit
1
71P8642
IBM ServeRAID 7k Adapter Option
2
90P1319 or
90P1381
IBM 73GB Hot-Swap U320 15K SCSI Drive
1
26K5097
IBM xSeries 625W Hot-Swap Power Supply (North America)
IBM 73GB Hot-Swap U320 15K SCSI Drive
(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM
xSeries 346 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2500 Cisco Unified IP Phones can be supported by a single x346 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Pentium Xeon 3.4-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7835-I1.
Note that IBM has discontinued sale of this configuration. Table 37 is only for reference to help you identify which
configuration you have deployed.
Table 37.
Quantity
Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
IBM Part Number
*
Description
1
8840-3RY or
**
8840-AC1
IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, Rack
1
39M5818
2 x 512MB PC2-3200 ECC DDR2 Non Chipkill SDRAM RDIMM Kit
1
39R8800
IBM ServeRAID 7k Adapter Option
2
40K1027
IBM 73.4GB Hot-Swap U320 15K SCSI Drive
1
40K1915
IBM xSeries 625W Hot-Swap Power Supply
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
**
This IBM build-to-order model must be configured with an Intel Xeon 3.4-GHz or 2-MB Layer 2 processor, 2-GB RAM,
ServeRAID 7k, two 73-GB 15k hot-swap Small Computer System Interface (SCSI) drives, and a redundant power supply.
IBM xSeries 345 with Dual Intel Xeon 3.06-GHz Processors
The x345 dual-processor configured server is a robust server solution designed for Cisco Unified Communications
Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 23 of 29
Cisco CallManager 3.3 or later and any version of Cisco Unified Communications Manager. The required
processors are dual Intel Xeon 3.06-GHz processors. No specific memory configuration is required as long as 4
GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 38 is only for reference to help you identify which
configuration you have deployed.
Table 38.
Hardware for IBM xSeries 345 with Dual Intel Xeon 3.06-GHz Processors
Quantity
IBM Part Number
Description
1
8670M1X
IBM x345 Xeon 3.06GHz/533MHz, 512KB, 512MB, OB, Ultra 320
1
02R1988
3.06GHz/533MHz, 512-KB Upgrade with Intel Xeon
4
33L5039
1GB PC2100 CL2.5 ECC DDR SDRAM RDIMM DIMM
1
13N2190
ServeRAID-6i+ SCSI Controller
4
32P0727
73.4GB 10k-RPM Ultra320 SCSI HS SL HDD
1
22P7047
8X Max Slimline DVD-ROM Drive
1
74P4965
514W H/Swap Redundant Power Supply
IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
This processor requires Cisco OS 2000.2.7.
The IBM x346 dual-processor configured server is a robust server solution designed for Cisco Unified
Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single
server running Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.4-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 39 is only for reference to help you identify which
configuration you have deployed.
Table 39.
Quantity
Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
IBM Part Number
*
Description
1
8840-31Y
IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, Rack
1
13N0684
3.4GHz/800MHz, 1MB Layer 2 Cache Xeon Processor
3
73P3522
2 x 512MB PC2-3200 ECC DDR2 Non-Chipkill SDRAM RDIMM Kit
1
71P8642
IBM ServeRAID 7k Adapter Option
4
90P1319 or
90P1381
IBM 73GB Hot-Swap U320 15K SCSI Drive
26K5097
IBM xSeries 625W Hot-Swap Power Supply (North America)
1
IBM 73GB Hot-Swap U320 15K SCSI Drive
(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM
x346 dual-processor configured server is a robust server solution designed for Cisco Unified Communications
Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 24 of 29
Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The required
processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB
of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I1.
Note that IBM has discontinued sale of this configuration. Table 40 is only for reference to help you identify which
configuration you have deployed.
Table 40.
Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
Quantity
IBM Part Number
Description
1
8840-3RY* or 8840-AC1**
IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, rack
1
40K2506
3.4GHz/800MHz, 2MB Layer 2 Cache Xeon Processor
1
39M5818
2 x 512MB PC2-3200 ECC DDR2 Non-Chipkill SDRAM RDIMM Kit
1
39M5809
2 x 1GB PC2-3200 ECC DDR2 SDRAM RDIMM Kit
1
39R8800
IBM ServeRAID 7k Adapter Option
4
40K1027
IBM 73.4GB Hot-Swap U320 15K SCSI Drive
1
40K1915
IBM xSeries 625W Hot-Swap Power Supply (North America)
* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
** This IBM build-to-order model must be configured with two Intel Xeon 3.4-GHz or 2-MB Layer 2 processors, 4-GB RAM,
ServeRAID 7k, four 73-GB 15k hot-swap SCSI drives, and a redundant power supply.
IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2,500 Cisco Unified IP Phones can be supported by a single x3650 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7835-I2.
Note that IBM has discontinued sale of this configuration. Table 41 is only for reference to help you identify which
configuration you have deployed.
Table 41.
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
Quantity
IBM Part Number
1
7979-5AY or 7979-AC1
Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in
HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s
1
39M5782
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
25R8064
IBM ServeRAID 8k SAS Controller
2
40K1052
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
*
*
Description
**
1
40K1905
835 Watt Hot-Swap Power Supply Option (US)
1
40K1908
PCI Riser Card PCI-X Option
1
39Y9566
Remote Supervisor Adapter II Slimline Refresh 1
* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 25 of 29
7979-5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of
40K1905.
** This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 41.
IBM x3650 with Intel Xeon 5140 2.33-GHz Processor (Special Order)
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2,500 Cisco Unified IP Phones can be supported by a single x3650 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server is the configuration equivalent of the Cisco 7835-I2.
Note that IBM has discontinued sale of this configuration. Tables 42 and 43 are only for reference to help you
identify which configuration you have deployed.
Use Table 42 for systems ordered within North America and Table 43 for systems ordered outside of North
America.
Table 42.
Quantity
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
IBM Part Number
*
Description
1
7979-AC1
IBM System x3650
1
1325
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
2
0542
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
IBM ServeRAID 8k SAS Controller
2
5159
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
PCI-Express Riser Card
1
1606
Remote Supervisor Adapter II Slimline
*
This IBM build-to-order model must be configured with Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB
hot-swap SAS drives, and all the other components itemized in Table 42. Note: Additional parts are required but are not listed in
Table 42. These parts will automatically be configured and may also vary by country (power cords and documentation).
Table 43.
Quantity
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
IBM Part Number
*
Description
1
7979-CTO
IBM System x3650
1
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
2
39M5783
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
25R8077
IBM ServeRAID 8k SAS Controller
2
40K1084
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
40K0028
PCI-Express Riser Card
1
39R9504
Remote Supervisor Adapter II Slimline
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 26 of 29
* This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 43. Note: Additional parts are required but are not
listed in Table 43. These parts will automatically be configured and may also vary by country (power cords and documentation).
IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified
Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single
server running Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The
required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific memory configuration is required
as long as 4 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Table 44 is only for reference to help you identify which
configuration you have deployed.
Table 44.
Quantity
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
IBM Part Number
*
Description
**
1
7979-5AY or 7979-AC1
Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in
HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s
1
40K1234
Dual-Core Intel Xeon Processor 5140 2.33GHz/1333MHz FSB, 2x2MB L2
1
39M5782
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
39M5785
2GB (2 x 1GB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
25R8064
IBM ServeRAID 8k SAS Controller
4
40K1052
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
*
1
40K1905
835 Watt Hot-Swap Power Supply Option (US)
1
40K1908
PCI Riser Card PCI-X Option
1
39Y9566
Remote Supervisor Adapter II Slimline Refresh 1
* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
7979-5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of
40K1905.
** This IBM build-to-order model must be configured with two Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 44.
IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors (Special Order)
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0. The IBM x3650 dual-processor configured
server is a robust server solution designed for Cisco Unified Communications Software applications. As many as
7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later or any
version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is
the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Tables 45 and 46 are only for reference to help you
identify which configuration you have deployed.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 27 of 29
Use Table 45 for systems ordered within North America and Table 46 for systems ordered outside of North
America.
Table 45.
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
Quantity
IBM Part Number
1
7979-AC1
IBM System x3650
1
1325
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
1
1383
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
4
0542
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
1670
IBM ServeRAID 8k SAS Controller
4
5159
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
4144
CD-RW/DVD Combo V Ultrabay Enhanced
1
1968
835 Watt Redundant Hot-Swap Power Supply Option
1
4334
PCI-Express Riser Card
1
1606
Remote Supervisor Adapter II Slimline
*
Description
* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 45. Note: Additional parts are required but are not
listed in Table 45. These parts will automatically be configured and may also vary by country (power cords and documentation).
Table 46.
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
Quantity
IBM Part Number
1
7979-CTO
IBM System x3650
1
41Y8981
Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
1
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
4
39M5783
1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM
1
25R8077
IBM ServeRAID 8k SAS Controller
4
40K1084
IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD
1
32R2784
CD-RW/DVD Combo V Ultrabay Enhanced
1
40K0029
835 Watt Redundant Hot-Swap Power Supply Option
1
40K0028
PCI-Express Riser card
1
39R9504
Remote Supervisor Adapter II Slimline
*
Description
* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 46. Note: Additional parts are required but are not
listed in Table 46. These parts will automatically be configured and may also vary by country (power cords and documentation).
HP Tape Drives
Cisco supports certain models of USB-attached DAT tape drives for software backups to a local tape instead of to
a network location. These tapes drives are supported with select models of Cisco MCS 7800 Series Media
Convergence Servers. These tape drives were formerly sold as Cisco part numbers DAT-USB-RM-72 and DATUSB-EXT-72.
Ordering instructions from HP: Please order from HP the part numbers of one of the supported models in Table
47. These part numbers are orderable through HP or HP authorized resellers in all regions. For media for these
DAT drives, please consult: http://h18004.www1.hp.com/products/quickspecs/11843_div/11843_div.HTML.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 28 of 29
Table 47.
Supported HP USB DAT Drives
HP Part Number
Description
Rack-mount tape drive
DW026A
DAT 72 USB Internal Tape Drive
A8007A
1U USB Rack-Mount Kit
External tape drive (free-standing)
DW027A
DAT 72 USB External Tape Drive
Cisco Application Software Ordering Information
For ordering information of the various Cisco Unified Communications applications, please consult the datasheets
and ordering guides for those applications.
Printed in USA
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C11-331705-22
08/12
Page 29 of 29