Product End-of-Life Notice
End-of-Sale and End-of-Life Announcement for the Cisco BTS 10200
Specified Hardware
EOL5072 - Amended
®
Cisco announces the end-of-sale and end-of life dates for the Cisco BTS 10200 Specified Hardware. The
last day to order the affected product(s) is March 16, 2007. Customers with active service contracts will
continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the
EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected
product(s). Table 2 lists the product part numbers affected by this announcement. For customers with
active and paid service and support contracts, support will be available until the termination date of the
contract, even if this date exceeds the Last Date of Support shown in Table 1.
The information in this Cisco BTS 10200 end-of-life/end-of-sale product bulletin is limited to Cisco direct and Cisco
approved reseller purchases and is applicable only to the product part numbers in Table 2. For non Cisco
purchases, please refer to the original equipment manufacturer's website for hardware service and support terms
and conditions.
Table 1.
End-of-Life Milestones and Dates for the Cisco BTS 10200 Specified Hardware
Milestone
Definition
Date
End-of-Life Announcement
Date
The date the document that announces the end of sale and end of life of a product is
distributed to the general public.
September 15, 2006
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is
no longer for sale after this date.
March 16, 2007
Last Ship Date:
HW
The last-possible ship date that can be requested of Cisco and/or its contract
manufacturers. Actual ship date is dependent on lead time.
June 14, 2007
End of Routine Failure
Analysis Date:
HW
The last-possible date a routine failure analysis may be performed to determine the cause
of product failure or defect.
March 15, 2008
End of New Service
Attachment Date:
HW
For equipment and software that is not covered by a service-and-support contract, this is
the last date to order a new service-and-support contract or add the equipment and/or
software to an existing service-and-support contract.
March 15, 2008
End of Service Contract
Renewal Date:
HW
The last date to extend or renew a service contract for the product.
June 11, 2011
Last Date of Support:
HW
The last date to receive service and support for the product. After this date, all support
services for the product are unavailable, and the product becomes obsolete.
March 14, 2012
Table 2.
Table 2.
Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
BTS-1280-4-AC=
Sunfire 1280 with 4 CPU - AC Power
BTS-1280-4-DC=
Netra 1280 with 4 CPU - DC Power
BTS-1280PROC-4=
Additional 4 Processors, 8 GB Memory for 1280 Expansion
BTS-240-AC=
Sunfire V240, 2 Processors, 8 GB Memory
BTS-240-DC=
Sun Netra 240, 2 Processors, 8 GB Memory
BTS-440-AC=
Sunfire V440 with 4 Processors, 8 GB Memory
BTS-440-DC=
Sun Netra 440, 4 Processors, 8 GB Memory
© 2006, 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 2
Product End-of-Life Notice
Product Migration Options
There is no replacement available for the Cisco BTS 10200 Specified Hardware at this time.
Customers should order the Cisco specified Sun hardware from Sun Microsystems or a Sun dealer.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward
the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their
Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco BTS 10200 Specified Hardware through the Cisco
Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain
countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about
the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached
their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and
subsidiaries. For more information, go to:
http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application:
http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Printed in USA
© 2006, 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C51-365176-01
07/09
Page 2 of 2