PL-Sxr-00-SH3-C6 8.5Gbps Rosa.pdf

Communications componentS
850 nm 8.5 G ROSA
PL-xxR-00-SH3-C6
Key Features
•Data rates up to 8.5 Gbps
•3.3 V operation
•-40 °C to 85 °C operation
•Differential output
•Isolated case
•Received signal strength indicator (RSSI)
•LC or SC connectorized PIN plus preamplifier
Benefits
•Optional controlled impedance flex from OSA to PCBA for excellent 8.5 Gbps product performance
•Industrial operational temperature
•Industry standard form factor and size
•Modulation performance verification
The JDSU 850 nm PL-xxR-00-SH3-C6 connectorized ROSA product (Receiver
Optical Sub-Assembly) is designed for high-speed data communication applications. The product utilizes a GaAs PIN/TIA integrated in a custom hermetic TO
package. Each device is actively aligned to a precision OSA housing using a proprietary alignment algorithm and tested to precise requirements. A controlled impedance flex circuit provides the user with optimum performance.
The PL-xxR-00-SH3-C6 converts optical power into an electrical signal at data
rates up to 8.5 Gbps and is engineered for performance over extended operating
temperature and power conditions with high reliability.
Each part is electro-optically tested to insure optimum performance and sensitivity.
NORTH AMERICA: 800 498-JDSU (5378)
worldwide: +800 5378-JDSU
WEBSITE: www.jdsu.com
850 nm 8.5 G ROSA
ROSA without Flex Dimensions (LC)
REV
UNITS: MM
.X = 0.2
.XX = 0.10
.XXX = 0.050
DESCRIPTION
ECO
ENG
DATE
CHECKED
DATE
006501
DWP
31 OCT 06
PB
01 NOV 06
UPDATED DRAWING TO REFLECT CHANGES TO
PARENT DWG
006785
AK
20 FEB 07
DAC
27 FEB 07
CORRECTED PIN DIAMETERS
007261
DB
21 JUN 07
CW
21 JUN 07
01
INITIAL RELEASE
02
03
10 MAX ROTATIONAL
MISALIGNMENT BETWEEN
TO CAN ASSY AND BARREL
+0.050
4.039
- 0.025
2X 5.941
0.660
6.599
BARREL
KEYING
FEATURE
2.083±0.025
A
5X 13.460
2.540
+0.025
5.080
- 0.076
2X
0.838±0.025
PIN 4
2X 82°
0.250
PIN 1
A
3X
1.270
45°±1°
PIN 3
PIN 2
2.921±0.025
2X 41°
PIN 5
0.440
+0.38
6.50
- 0.25
4.039
OPTICAL REF PLANE
4.166
45°±1°
ENG
MUST CONFORM TO PICOLIGHT
QUALITY PROCEDURE 07000056
SECTION A-A
PL-SxR-00-SH3-C6 (no flex)
Pin
Symbol
Function
1
2
3
4
5
Vout P
Vdd
RSSI
Vout N
GND
TIA Output Voltage (Non-Inverted)
Positive Supply Voltage
Receive Signal Power, Avg. Current
TIA Output Voltage (Inverted)
Ground
UNLESS OTHERWISE SPECIFIED D PAQUET
DIMENSIONS ARE IN MILLIMETERS DRAWN
UNLESS OTHERWISE SPECIFIED
D PAQUET
CHECKED
DATE
31 OCT 06
DATE
31 OCT 06
DATE
1480 ARTHUR AVENUE
Ph 303-530-3189
LOUISVILLE, COLORADO 80027
Fx 303-530-4897
DWG, DATASHEET, ROSA
10G, LC, 4+1, STACK PIN, ULTEM
850 nm 8.5 G ROSA
ROSA with Flex Dimensions (LC)
UNITS: MM
.X = 0.2
.XX = 0.10
.XXX = 0.050
+0.050
4.039
- 0.025
2X 5.941
0.660
6.599
5X 1
A
PIN 3
PIN 2
2.083±0.025
BARREL
KEYING
FEATURE
5.080+0.025
- 0.076
PIN 4
0.838±0.025
2.921±0.025
90°±10°
PIN 1
A
PIN 5
10.80
1.270
6.18+0.38
- 0.25
PAD 1
PAD 6
0.80
PAD PITCH
45.0°±0.5°
0.13
0.40
4.039
1.12
0.92
0.46
4.166
0.30
0.38
2X 0.71
DETAIL B
45.0°±0.5°
2X 2.28
OPTICAL REF PLANE
SECTION A-A
PL-FxR-00-SH3-C6 (with flex)
Pad
Symbol
Function
1
2
3
4
5
6
Vcc
GND
Vout P
Vout N
GND
RSSI
Vcc
Ground
TIA Output Voltage (Non-Inverted)
TIA Output Voltage (Inverted)
Ground
Receive Signal Power, Avg. Current
0.5
B
4.840
850 nm 8.5 G ROSA
Shipping Information
Shipped in anti-static stackable trays.
Absolute Maximum Ratings
(Tcase = 30 °C , Continuous Wave (CW) operation unless otherwise stated)
Parameter
Symbol
Storage temperature
Tst
Incident optical power
Pin
Lead solder temperature
Ts
Flex attach temperature
TF
Power supply voltage
VP
Ratings
Unit
-40 to +100 °C
+5
dBm
260 °C for 10 sec.
2 mm from case
370 °C for 10 sec.
4.0
V
Note:
Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may
adversely affect reliability.
Electro-optical Characteristics
Parameter
(Tcase = 30 °C , Vcc = 3.3 V unless otherwise stated)
Symbol
Minimum
Typical
Maximum
Wavelength responsivity
l
840
850
860
-40
85
Case operating temperature
Top
Supply voltage
Vcc
2.97
3.3
3.63
Supply current
Icc
34
45
61
Bandwidth
BW
6.375
Low frequency cutoff
BWLF
70
Responsivity (@50 MHz)
R
5000
Sensitivity (OMA)
S
-15
-14
Output resistance
Ro
100
Optical overload
1.5
Differential output voltage
Vout
285
Duty cycle distortion
1
10
Rise/Fall time
tr/tf
50
Slope of RSSI vs Pin
RSSI slope
0.9
1
1.1
RSSI current with zero input1
RSSI offset
1
RSSI linearity range
RSSI range
5
1100
1. Connect RSSI to ground with a resistor <2500 ohms.
Unit
nm
°C
V
mA
GHz
kHz
V/W
dBm
W
dBm
mV
%
ps
A/W
uA
uA
850 nm 8.5 G ROSA
Order Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected].
Sample: PL-SLR-00-SH3-C6
Part Number
PL-SLR-00-SH3-C6
PL-FLR-00-SH3-C6
Description
850 nm 10 G ROSA with LC housing, without flex
850 nm 8 G ROSA with LC housing, with flex
NORTH AMERICA: 800 498-JDSU (5378)
worldwide: +800 5378-JDSU
WEBSITE: www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149328 000 0308 PL-XXR-00-SH3-C6.DS.CC.AE
March 2008