REFERENCES
[1]
Mahmud Iwan and Wahyudi, Fuzzy-tuned PID Control Design for Automatic
Gantry Crane, International Conference on Intelligent and Advanced
Systems, 2007.
[2]
M.A.Ahmad, M.S. Ramli, R.M.T. Raja Ismail, A.N.K. Nasir and M.A.
Zawawi, The Investigations of PD-type Fuzzy Logic with Different Polarities
Input Shaping for Anti-Sway Control of a Gantry Crane System, Conference
on Innovative Technologies, 2009.
[3]
Chunshien Li and Chun-Yi Lee, Fuzzy Motion Control of an AutoWarehosuing Crane System, IEEE Trans. Industrial Electronics, vol. 48, no.
5, October 2001.
[4]
Yaolong Tan, Jie Chang, and Hualin Tan, Adaptive Backstepping Control
and Friction Compensation for AC Servo with Inertia and Load Uncertainties,
IEEE Trans. Industrial Electronics, vol. 50, no. 5, October 2003.
[5]
Wahyudi and J.Jalani, Robust Fuzzy Logic Controller for an Intelligent
Gantry Crane System, IEEE Trans. Industrial Electronics, August 2006.
[6]
Mohd Ashraf, Ahmad Nor and Haszuraidah, Techniques of Anti-Sway and
Input Tracking Control of Gantry Crane System, International Conference
IEEE, 2009.
[7]
Chunshien Li and Chun-Yi Lee, Fuzzy Motion Control of an AutoWarehousing Crane System, IEEE Trans. Industrial Electronics,vol. 48, no.
5, 2001.
[8]
Nalunat Khongkoom,Attapol Kanchanathep and Suthichai, Control of the
Position Servo Motor by Fuzzy Logic, Journal of Faculty of Engineering and
Research Center for Communications and Information Technology,King
Mongkut’s Institute of Technology,Thailand, 2000.
[9]
Karel Jezernik, High Precision VSS Motion Control of Servo Drives,
International Journal of University of Maribor, Faculty of Electrical
Engineering and Computer Science, 2002
69
[10]
Yingzhe Wu,Hui Li and Ye Bi, Study on Missile Rudder Servo System Based
on Mixed Fuzzy-PID Control Algorithm, IEEE International Conference on
Mechatronics and Automation, 2011.
[11]
A. Pisano, A. Davila, L. Fridman, and E. Usai, Cascade control of pm dc
drives via second-order sliding-mode technique, IEEE Transactions on
Industrial Electronics, vol. 55, pp. 3846–3854, 2008.
.
[12]
Rajeeb Dey,Nishant Sinha,Priyanka Chaubey, Active Sway Control of a
Single Pendulum Gantry Crane System using Output-Delayed Feedback
Control Technique, International Conference Control, Automation, Robotics
and Vision Singapore, 2010.
[13]
M.A.M. Schreppers, Control of a Gantry Crane Process by a Fuzzy Logic
Controller, M.Sc. Thesis, June 1993.
[14]
Arto Makkonen and Heikki N.Koivo, Fuzzy Control of a Nonlinear
Servomotor Model, 3rd Internatinal Workshop on Advanced Motion Control,
pp. 833-841, March 1994.
[15]
Xu J. and Feng X, Design of Adaftive Fuzzy PID tuner Using Optimization
Method, 5th World Congress on Intelligent Control and Automation, 2004.
[16]
Renno J.M., Trabia M.B. and Moustafa K.A.F., Anti-swing Adaptive Fuzzy
Controller for An Overhead Crane with Hoisting,IMECE ASME International
Mechanical Engineering Congress & Exposition, 2004.
[17]
Omar, H.M, Control of Gantry and Tower Cranes, Ph. D. Thesis, M.S
Virginia Tech, 2003.
[18]
Wahyudi and J.Jalani, Modelling and parameters identification of gantry
crane system, in Proceedings of International Conference on Mehctronics,
no. 129, 2005.
[19]
Trabia M.B., Renno J.M. and Moustafa K.A.F. , A General Anti-swing Fuzzy
Controller for An Overhead Crane with Hoisting, Proceedings of IEEE
International Conference on Fuzzy Systems, 2006.
[20]
Lee, H.H, and Cho, A New Fuzzy Logic Anti Swing Control for Industrial
Dimensional Overhead Cranes, Thesis of Department of Mechanical
Engineering, University of Suwon, 2001.
70
[21]
Simatic S7 Fuzzy Control User’s Manual, Siemens.
[22]
FuzzyControl++ User’s Manual, Siemens, 2000.
[23]
L-Force Loader User’s Manual, Lenze, 2003.