Useful Links
Cisco ASA 5506-X for
Firepower Threat Defense or ASA
Note: This Table is a regulatory document required for products shipped to
the People’s Republic of China.
Scan the QR code above to view this document on your mobile device.
Go to the following URL to view this document online:
http://www.cisco.com/go/asa5506x-welcome
Дополнительную информацию на русском языке можно получить на
сайте http://www.cisco.com/web/RU/index.html
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its
affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
© 2016 Cisco Systems, Inc. All rights reserved.
Printed in Mexico
Imprimé au Mexique
Напечатано в Мексике
78-100510-03A0
78-100510-03A0
Cisco Systems, Inc.
www.cisco.com
CAUTION: DO NOT STACK UNITS.
The ASA 5506-X series hardware supports either of the following advanced
firewall systems:

Cisco Firepower Threat Defense

Cisco ASA
Note: Your hardware comes preinstalled with one of the above systems. To
reimage your hardware to the other system, see the reimaging document:
http://www.cisco.com/go/asa-ftd-reimage
2. Connect to the ASA Chassis and ASA FirePOWER Module. See the
quick start guide:
http://www.cisco.com/go/asa5506x-quick
3. Check the Release Notes for Important Notes. Choose the ASDM or CLI
release notes for your version:
http://www.cisco.com/go/asa-rns
4. Configure the ASA. Choose the ASDM or CLI configuration guide for your
version:
http://www.cisco.com/go/asa-config
Firepower Threat Defense Links
5. See Also:
1. Install the ASA 5506-X. See the hardware installation guide:
— All ASA documentation:
http://www.cisco.com/go/asa5506x-install
http://www.cisco.com/go/asadocs
2. Connect to the Firepower Threat Defense device. See the quick start guide:
— Troubleshooting TechNotes:
http://www.cisco.com/go/ftd-quick
3. Check the Release Notes for Important Information. Choose the
release notes for your version:
http://www.cisco.com/go/ftd-notes
4. Configure the Firepower Threat Defense device. Choose the configuration
guide for your version:
http://www.cisco.com/go/asa-technotes
Common Links

http://www.cisco.com/go/asa-firepower-sw
http://www.cisco.com/go/ftd-config
5. See Also:
Note: A Cisco.com login and Cisco service contract are required.

— All Firepower Threat Defense documentation:
http://www.cisco.com/go/ftd-docs
ASA Links
Cisco Support Community Forums:
https://supportforums.cisco.com

— Troubleshooting TechNotes
http://www.cisco.com/go/ftd-technotes
Software Downloads:
Regulatory Compliance and Safety Information:
http://www.cisco.com/go/asa5506x-compliance

Warranty, License, and Privacy Information:
— Warranty and End User License Agreement:
http://www.cisco.com/go/warranty
— AnyConnect License: http://www.cisco.com/go/anyconnect-license
1. Install the ASA 5506-X. See the hardware installation guide:
http://www.cisco.com/go/asa5506x-install
— Privacy Portal: http://www.cisco.com/go/privacy