Useful Links
Cisco ASA 5512-X, ASA 5515-X, ASA
5525-X, ASA 5545-X, and ASA 5555-X for
Firepower Threat Defense or ASA
Note: This Table is a regulatory document required for products shipped to
the People’s Republic of China.
Дополнительную информацию на русском языке можно получить на
сайте http://www.cisco.com/web/RU/index.html
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its
affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
© 2016 Cisco Systems, Inc. All rights reserved.
Printed in Mexico
Imprimé au Mexique
Напечатано в Мексике
78-21301-03A0
78-21301-03A0
Cisco Systems, Inc.
www.cisco.com
Scan the QR code above to view this document on your mobile device.
Go to the following URL to view this document online:
http://www.cisco.com/go/asa5500x-welcome
The ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X hardware supports
either of the following advanced firewall systems:

Cisco Firepower Threat Defense

Cisco ASA
Note: Your hardware comes preinstalled with one of the above systems. To
reimage your hardware to the other system, see the reimaging document:
http://www.cisco.com/go/asa-ftd-reimage
2. Connect to the ASA Chassis and ASA FirePOWER Module. See the
quick start guide:
http://www.cisco.com/go/asa5500x-quick
3. Check the Release Notes for Important Notes. Choose the ASDM or CLI
release notes for your version:
http://www.cisco.com/go/asa-rns
4. Configure the ASA. Choose the ASDM or CLI configuration guide for your
version:
http://www.cisco.com/go/asa-config
Firepower Threat Defense Links
5. See Also:
1. Install the ASA. See the hardware installation guide:
— All ASA documentation:
http://www.cisco.com/go/asa5500x-install
http://www.cisco.com/go/asadocs
Note: Install the chassis with the front bezel facing the cold aisle.
— Troubleshooting TechNotes:
Note: The power turns on immediately when you plug in the ASA.
http://www.cisco.com/go/asa-technotes
2. Connect to the Firepower Threat Defense device. See the quick start guide:
http://www.cisco.com/go/ftd-quick
3. Check the Release Notes for Important Information. Choose the
release notes for your version:
Common Links

http://www.cisco.com/go/asa-firepower-sw
http://www.cisco.com/go/ftd-notes
http://www.cisco.com/go/asa-software
4. Configure the Firepower Threat Defense device. Choose the configuration
guide for your version:
http://www.cisco.com/go/ftd-config
Note: A Cisco.com login and Cisco service contract are required.

5. See Also:
— All Firepower Threat Defense documentation:
http://www.cisco.com/go/ftd-technotes
ASA Links
Cisco Support Community Forums:
https://supportforums.cisco.com

http://www.cisco.com/go/ftd-docs
— Troubleshooting TechNotes
Software Downloads:
Regulatory Compliance and Safety Information:
http://www.cisco.com/go/asa5500x-compliance

Warranty, License, and Privacy Information:
— Warranty and End User License Agreement:
http://www.cisco.com/go/warranty
— AnyConnect License: http://www.cisco.com/go/anyconnect-license
— Privacy Portal: http://www.cisco.com/go/privacy
1. Install the ASA. See the hardware installation guide:
http://www.cisco.com/go/asa5500x-install
Note: Install the chassis with the front bezel facing the cold aisle.
Note: The power turns on immediately when you plug in the ASA.