Operating Instructions Jetted Neck Pulse-Pillow

“TO BE REMOVED FOR USE BY THE OCCUPANT.”
Jason International, Inc.
49-2041-009
Date 11/14
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
MADE IN THE U.S.A.
OWNER’S MANUAL
Operating Instructions for Jason Jetted Neck Pulse-Pillow
Neck Pulse Pillow on/off
NECK PILLOW
Alternate Pulsation Mode
Simultaneous Pulsation Mode
ON/OFF AND CONSTANT MODE
ALTERNATE PULSATION MODE
Caution: To operate Jason’s Jetted Neck PulsePillow, the whirlpool pump must be operating.
Note: To select the alternate pulsation mode, the
jetted neck system must be On.
1. To start the jetted neck system, simply press the On/Off
key.
1. Press the Alternate Pulsation Mode key once to
choose the alternating pulsation mode.
·
Both jets will function simultaneously in the
Constant mode.
2. To stop the jetted neck system, press the On/Off button
again.
·
The water flow will pulsate (on/off) alternating
between both jets at low speed.
2. Press the key once again for high speed.
3. Press the key once again to return to low speed.
SIMULTANEOUS PULSATION MODE
Note: To select the simultaneous pulsation mode, the
jetted neck system must be On.
1. Press the Simultaneous Pulsation Mode key once
to select the simultaneous pulsation mode.
·
Note: The pillow system must be turned Off to return
the jetted neck system to the Constant mode. After
being turned Off, the pillow system will always come
On in the Constant mode.
The water flow will pulsate (on/off) at low
speed simultaneously through both jets.
2. Press the key once again for high speed.
3. Press the key once again to return to low speed.
Jason International, Inc. • 501.771.4477 Page 1 of 1Customer Service : 800.255.5766
Copyright © 2014 Jason International.