ORDER GUIDE
Special use fibers [Thru-beam type (one pair set)]
"2.5
800mm 䡬
R "0.16mm opaque object
䢇
G "0.16mm opaque object
䡬
䢇
130mm
Wide beam
31⳯13.5
1,500mm
Array
15
50mm
• Long sensing range with small Free Cut
fiber heads of "2.5mm
2m
FT-SFM2L
• The wide beam detects an
Free Cut
object at any place within
2m
the range.
FT-A8
Horizontal"0.05mm opaque object
15
40mm
R
䡬
䢇
Vertical"0.7mm opaque object
270mm
0.6
"2.5
("2 for FT-V22)
Sleeve part cannot be bent.
"1.5 "2.5
0.8
Sleeve part cannot be bent.
"0.4
R "0.08mm opaque object
䡬
䢇
G "0.06mm opaque object
䡬
䢇
70mm
10mm
"3
7mm
"3
30mm
Sleeve part cannot be bent.
"3
700mm
90mm
"4
400mm
1.5
"3.7
700mm
3
"1
M3
• The fiber head is bent at a
Free Cut
right angle with 5mm bending
2m
radius.
1m
• The side-view sensing enables
it to be used in a small space. Free
160mm
18mm
FT-R80
FT-V22
FT-V41
Cut
2m
R "0.12mm opaque object
䡬
䢇
G "0.05mm opaque object
䡬
䢇
200mm
35mm
Sleeve part cannot be bent.
"0.5
R "0.12mm opaque object
䡬
䢇
G "0.08mm opaque object
䡬
䢇
R "0.08mm opaque object
䡬
䢇
G "0.05mm opaque object
䡬
䢇
175mm
18mm
"1
FT-AFM2E
Horizontal"0.04mm opaque object
45mm
Small diameter
• The wide beam detects an
object at any place within Free Cut
2m
the range.
G
䡬
䢇
Vertical"0.2mm opaque object
Lens mountable
M4
FT-AFM2
Horizontal"0.04mm opaque object
290mm
Elbow
FT-FM10L
R
䡬
䢇
Vertical"0.7mm opaque object
G
䡬
䢇
Vertical"0.2mm opaque object
Side sensing
Narrow beam
• Large lenses on the fiber
heads increase the sensing Free Cut
range significantly.
10m
• Fiber cable length 10m each
Horizontal"0.05mm opaque object
320mm
Side-view
(Note 3)
Model No.
FT-SFM2SV2
R "0.02mm opaque object
䡬
䢇
• Ultra-small diameter heads,
very narrow beam "0.125mm
500mm
FT-E10
R "0.02mm opaque object
䡬
䢇
• Ultra-small diameter heads,
very narrow beam "0.25mm
1m
FT-E20
R "0.3mm opaque object
䡬
䢇
G "0.1mm opaque object
䡬
䢇
• Aperture angle 4⬚ or less
• Laser beam equivalent detection
R "0.3mm opaque object
䡬
䢇
• Aperture angle 4⬚ or less
• Side-view type
R "0.3mm opaque object
䡬
䢇
• Aperture angle 2° or less
• Side-view type
R "0.08mm opaque object
䡬
䢇
G "0.02mm opaque object
䡬
䢇
• The narrow aperture angle,
1/6 of a conventional model,
reduces interference.
Sleeve part cannot be bent.
FX-D1/A1/M1
2,800mm
Fiber cable
length
Fiber Sensors
FX-11A
FX-13
R "0.5mm opaque object
䡬
䢇
G "0.5mm opaque object
䡬
䢇
Features
FT-K2
1m
FT-KV2
Free
FZ-10
10,000mm
M14
Top sensing
Ultra-small
diameter
Min. sensing object 䡬
R : Red LED type
䢇
under the optimum G
䢇 : Green LED type
condition (Note 2) 䡬
Cut
2m
FT-KV8
1m
FT-KM1S2
Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20% max. depending upon how the fiber is cut.
2) The optimum condition is the condition when the sensitivity is set so that the sensing output just changes
to light incident operation in the object absent condition.
CX-20
䡺: Red LED type
Sensing range 䡵
䡵
䡺: Green LED type
(Note 1)
Amplifier Built-in Type
CX-30
CX-RVM5/D100/ND300R
EX-10
Shape of fiber head (mm)
Long sensing
range with lens
Type
PHOTOELECTRIC SENSORS
FX-D1/A1/M1
Notes: 3) Correlation between sensing width and setting distance
with sensing object diameter as a parameter
Sensing width a (mm)
10
5
"1mm(w
ithout
slit m
"0.8mm(w
ask
it
"0.5mm(w hout slit mask )
ithout sli
t mask )
)
"1mm(with 1⳯12mm slit masks)
"0.5mm(with 1⳯12mm slit masks)
"0.3mm(with 1⳯12mm slit masks)
"1mm(with 0.5⳯12mm slit masks)
"0.3mm(with 0.5⳯12mm slit masks)
"0.2mm(with 0.5⳯12mm slit masks)
L
a
Gold wire or
copper wire
0
250
500
750
Setting distance L (mm)
1,000
67
Ramco Innovations - 1207 Mpale Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com
EX-20
Notes: 3) The sensing width varies with the sensing object size and the sensing distance.
Notes: 3) Please refer to the graph given below.
Fibers
Type Standard, small fiber head, small diameter, sharp bend, flexible, long
sensing range with lens, wide beam, array, elbow, high precision, thrubeam type of ultra-small diameter
Item
R25mm or more
Sharp bend: R1mm or more (FD-WG4, FD-WSG4: R2mm or more), Flexible:
R4mm or more, Thru-beam type of ultra-small diameter: R5mm or more
Allowable bending radius
ⳮ40 to Ⳮ70⬚C
(Sharp bend: ⳮ40 toⳭ60⬚C, FD-EG1: ⳮ20 toⳭ60⬚C)
Ambient temperature
Ambient humidity
Fixed-focus
reflective
Side-view, narrow beam, narrow-view,
reflective type of ultra-small diameter
R10mm or more
R25mm or more
(FT-K2 and FT-KV2: R10mm or more)
ⳮ40 to Ⳮ70⬚C
ⳮ20 to Ⳮ60⬚C
and FD-L42: FT-V41, FD-V41, FT-KV8, FT-K2
)
( FD-L41
ⳮ40 toⳭ60⬚C ) ( and FT-KV2: ⳮ40 to Ⳮ60⬚C
Polycarbonate
: FT-A8, lens of FT-WS8L
Stainless steel (SUS): FT-SFM2, small fiber head, non-threaded type
of sharp bend, FT-SNFM2, FD-SNFM2,
FT-SFM2L, FT-P40, FT-P2, FD-P40, FD-P2,
sleeve part of sleeve-attached fiber
Fiber head
Polyolefin
: Lens of FT-A8
ABS
: FT-FM10L
Acrylic
: Lens of FT-FM10L
Die-cast zinc alloy
: Threaded part of FD-R80
ABS: FD-L4,
FD-L41
Acrylic:
Lens of FD-L4
Aluminum:
FD-L42
Stainless steel (SUS)
FT-KV2, threaded part of
FD-EN500S1䡠FD-ENM1S1䡠
FT-KM1S2 and FD-KM1S2:
Brass, Lens of FT-K2: Glass,
Reflector of FT-KV8, Prism of
FT-KV2: Acrylic, Holder of
FT-KV8: Polycarbonate
Threaded head fiber: 2 Nos. of nuts (thru-beam type: 4 Nos.) and 1 No. of toothed lock washer (thru-beam type: 2 Nos.)
Free-cut type fiber (except economy type): 1 No. of FX-CT1 (Fiber cutter)
FD-N4, Small diameter free-cut type fiber, high precision free-cut type fiber: FX-AT10 ("1mm fiber attachment),
FX-AT13 ("1.3mm fiber attachment)
FT-WS4, FD-W44, FD-WT8, FD-WS8, FD-WT4, FD-WG4 or FD-WSG4: FX-AT10 ("1mm fiber attachment)
FT-A8: 2 Nos. of 0.5⳯12mm seal type slit mask and 2 Nos. of 1⳯12mm seal type slit mask
FD-L4: FX-AT10 ("1mm fiber attachment), FX-AT13 ("1.3mm fiber attachment), 2 Nos. of M2.6 (length 12mm) screws with
washers and 2 Nos. of nuts
Fixed-focus reflective type fiber: FX-AT10 ("1mm fiber attachment)
Accessories
Fibers
Type
Liquid level sensing
Mountable on pipe
Item
Ambient temperature
Material
Sheath
Fiber head
Accessories
350⬚C type
Protective tube:
R200mm or more
R40mm or more
R10mm or more FT-60V: R30mm
Fiber cable:
or more
R15mm or more
(
ⳮ40 to Ⳮ125⬚C ⳮ40 to Ⳮ100⬚C
(Note 1)
(Note 1)
Ambient humidity
Fiber core
Heat-resistant
Vacuum
130⬚C type
R25mm or more
)
ⳮ40 to Ⳮ120⬚C
200⬚C type
ⳮ60 to Ⳮ350⬚C
(Note 2, 3)
ⳮ60 to Ⳮ200⬚C
(Note 3)
Chemicalresistant
R30mm or more
ⳮ60 to Ⳮ130⬚C
ⳮ40 to Ⳮ115⬚C
35 to 85% RH (No dew condensation or icing allowed)
Acrylic
Protective tube:
Fluorine resin
Sheath:
Polypropylene
Polypropylene
Quartz glass (Note 4)
Multi-component glass (Note 5)
Fluorine resin
Stainless steel
(SUS)
Polyetherimide
Aluminum
Acrylic
Silicone
Inside stainless
steel (SUS)
spiral tube
Fluorine resin
Brass
(Nickel plated)
Brass
(Nickel plated)
Protective tube:
Fluorine resin
Fiber sheath:
Polypropylene
Threaded head fiber: 2 Nos. of nuts (thru-beam type: 4 Nos.) and 1 No. of toothed lock washer (thru-beam type: 2 Nos.)
Free-cut type fiber, chemical-resistant type fiber: 1 No. of FX-CT1 (Fiber cutter)
FD-F4䡺 and FD-F9䡺: FX-AT-10 ("1mm fiber attachment)
FD-F4䡺 and FD-F9䡺: 4 Nos. of tying bands and 2 Nos. of anti-slip tubes
Notes: 1) With the liquid level sensing fiber, make sure that the temperature of the liquid is also within the ambient temperature range.
Notes: 2) If the fiber is used underⳮ30⬚C, its resistable maximum temperature drops toⳭ200⬚C. If the side-view lens FX-SV1 is put on the fiber head, the
allowable maximum temperature comes down toⳭ300⬚C. (The ambient temperature range of the FX-SV1 is fromⳮ60 to Ⳮ300⬚C.)
Notes: 3) The ambient temperature of heat-resistant 350⬚C type and 200⬚C type fibers is the value in dry condition. In humid environment, the ambient
temperature differs. (For a high humidity of 85% RH, the ambient temperature is 0 to 40⬚C.)
Notes: 4) If the fiber material is quartz glass, keep it away from vibration or impact.
Notes: 5) If the fiber material is multi-component glass, keep it away from vibration or impact.
75
Ramco Innovations - 1207 Mpale Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com
FZ-10
Material
Brass (Nickel plated) : Threaded part of standard, threaded part of small
diameter, threaded type of sharp bend, threaded
part of thru-beam type ultra-small diameter,
FT-P80, FD-P80, high precision, array, threaded
part of FT-R80
CX-20
)
Amplifier Built-in Type
CX-30
CX-RVM5/D100/ND300R
EX-10
(
Sheath
EX-20
Acrylic
Polyethylene
Thru-beam type of ultra-small diameter and flexible, except for FD-P2: Vinyl chloride
Reflective type of narrow-view: Polyurethane
Fiber Sensors
FX-11A
FX-13
35 to 85% RH (No dew condensation or icing allowed)
Fiber core
Allowable bending radius
PHOTOELECTRIC SENSORS
SPECIFICATIONS
FX-D1/A1/M1
FX-D1/A1/M1
SENSING CHARACTERISTICS (TYPICAL)
Parallel deviation
Red LED type
20
L
Fiber
head
0
40
20
0
20
Center
Left
Right
Operating point ?(mm)
FT-P80
600
6
400
4
Fiber
head
#
2
0
40
Setting distance L (mm)
Fiber
head
#
Setting distance L (mm)
40
2
0
2
Center
Left
Right
Operating point ?(mm)
#
200
L
Fiber
head
4
Fiber
head
L
Fiber
head
0
200
4
Green LED type
400
100
0
100
Center
Left
Right
Operating point ?(mm)
FT-P40
Thru-beam type
Red LED type
Green LED type
800
8
60
#
L
Fiber
head
50
0
40
200
20
0
20
Center
Left
Right
Operating point ?(mm)
40
Thru-beam type
Red LED type
Green LED type
0
200
100
0
100
Center
Left
Right
Operating point ?(mm)
FT-P2
40
#
L
Fiber
head
20
0
20
200
10
0
10
Center
Left
Right
Operating point ?(mm)
#
L
Fiber
head
0
100
20
50
0
50
Center
Left
Right
Operating point ?(mm)
FT-FM10L
Thru-beam type
Red LED type
Fiber
head
50
Green LED type
50
0
50
Center
Left
Right
Operating point ?(mm)
FT-SFM2L
10,000
Fiber
head
10
#
L
Fiber
head
5
4
2
0
2
Center
Left
Right
Operating point ?(mm)
L
Fiber
head
500
0
500
1,000
Center
Left
Right
Operating point ?(mm)
FT-A8
Green LED type
Fiber
head
3,000
#
2,000
L
Fiber
head
1,000
0
200
100
0
100
Center
Left
Right
Operating point ?(mm)
200
Thru-beam type
Red LED type
2,000
Setting distance L (mm)
150
Fiber
head
#
L
Fiber
head
Setting distance L (mm)
Vertical
direction
1,000
0
200
#
0
1,000
4
200
500
Fiber
head
5,000
Thru-beam type
Red LED type
FZ-10
4,000
15
0
100
4
EX-20
0
100
L
Fiber
head
2
0
2
Center
Left
Right
Operating point ?(mm)
Green LED type
Setting distance L (mm)
#
4
Thru-beam type
Red LED type
Setting distance L (mm)
Setting distance L (mm)
Fiber
head
50
L
Fiber
head
5
0
100
20
100
Fiber
head
#
Fiber
head
#
100
L
Fiber
head
50
1,500
Horizontal
direction
1,000 Vertical
Horizontal
direction
Fiber
head
direction
Fiber
head
500
L
?
8mm approx.
Fiber head
100
0
100
Center
Left
Right
Operating point ?(mm)
200
0
40
CX-20
100
Fiber
head
10
Amplifier Built-in Type
CX-30
CX-RVM5/D100/ND300R
EX-10
L
Fiber
head
60
Setting distance L (mm)
#
100
Setting distance L (mm)
Setting distance L (mm)
Setting distance L (mm)
Fiber
head
200
Setting distance L (mm)
Fiber
head
100
80
300
Setting distance L (mm)
FX-D1/A1/M1
Green LED type
80
Thru-beam type
Fiber Sensors
FX-11A
FX-13
Red LED type
Setting distance L (mm)
FT-WS8L
Thru-beam type
Setting distance L (mm)
FT-W4
FT-WS4
PHOTOELECTRIC SENSORS
FX-D1/A1/M1
20
0
20
Center
Left
Right
Operating point ?(mm)
40
Fiber
head
L
?
0
100
50
0
50
100
Center
(Down) Left
Right (Up)
Operating point ?(mm)
79
Ramco Innovations - 1207 Mpale Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com
PHOTOELECTRIC SENSORS
DIMENSIONS (Unit: mm)
Thru-beam type fibers
FT-W8
FT-WS8
Free-cut
15
3.5
8
2,000
3
M2.6⳯0.45
Opposing faces 7 thickness 2.4
M4⳯0.7
Toothed lock washer "8.5
Screw tightening face
FT-W4
(3)
"2.5 [Stainless steel (SUS)]
FT-WS4
15
2.7
Free-cut
2,000
8
10
"0.5 fiber core⳯1
FZ-10
"2.2
With attachment
2,000
(3)
"2.2
"3
Opposing faces 5.5 thickness 1.8
M3⳯0.5
Screw tightening face
FT-WS8L
"1.5 [Stainless steel (SUS)]
Toothed lock washer "6.5
FT-P80
CX-20
Free-cut
"1
Free-cut
Details of
sensing part
8
3.5
2,000
"2 lens
(2)
EX-10
CX-30
CX-RVM5/D100/ND300R
Amplifier Built-in Type
2,000
"2.2
Free-cut
"0.5 fiber core⳯1
EX-20
Free-cut
"1 fiber core⳯1
"1 fiber core⳯1
FX-13
FX-11A
Fiber Sensors
FX-D1/A1/M1
FX-D1/A1/M1
"3 [Stainless steel (SUS)]
FT-P40
Free-cut
"0.265 fiber core
⳯16
"2.2
With attachment
Details of
sensing part
3
M2.6⳯0.45
M4⳯0.7
2,000
12
("4) protective tube
"2.2
Opposing faces 7 thickness 2.4
Toothed lock washer "8.5
Screw tightening face
FT-P2
Details of
sensing part
10
2.7
"0.25 fiber core
⳯4
2,000
"0.25 fiber core⳯4
("3.4) protective tube
"1
Opposing faces 5.5 thickness 1.8
M3⳯0.5 [Stainless
steel (SUS)]
Toothed lock washer "6.5
10
1,000
19.5
10
"1
"1.5 [Stainless
steel (SUS)]
"4
"2.2
("2.3) protective tube
Screw tightening face
FT-FM10L
FT-SFM2L
Free-cut
23
16
10,000
8
"7
"10 lens
106
M14⳯1
(ABS)
Free-cut
8
"4.5
"2.2
"2.5 lens
2,000
"2.5 [Stainless steel (SUS)]
"2.2
Opposing faces 19 thickness 3.5
Toothed lock washer "23
Ramco Innovations - 1207 Mpale Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com