Two Locations
415 Hamburg Turnpike
Wayne, NJ 07470
1139 West Carrier Pkwy
Grand Prairie, TX 75050
1-800-2-HAYDON
[email protected]
www.haydoncorp.com
H-Strut Metal Framing & Accessories
®
H-Block Rooftop Support Systems
®
H-Strut
15⁄8"
• Raw Materials Inspection
• In-line quality checks
• Routine destructive testing
• Shrink-wrapped painted strut
bundles
15⁄8"
Channel
15⁄8"
15⁄8"
7
Member of the Metal Framing
Manufacturing Association
Member of the Fabricators &
Manufacturers Association
Foundation
• A rigorous quality system guarantees our
ability to exceed industry tolerances
• Buy American Act Compliant
• American Reinvestment Recovery Act
Compliant (A.R.R.A.)
15⁄8"
1"
13⁄8"
15⁄8"
15⁄8"
27⁄16"
• Cleanest channel in the framing industry
• Oil-free strut bundles that will keep your
warehouses and job sites free of tramp oil
• Complete material traceability with full mill
certifications upon request
15⁄8"
15⁄8"
Member of Specialty Tools &
Fasteners Distributors
Association
Member of National Electrical
Manufacturers Representatives
Association
All products are
Union made.
®
The H-Strut
Difference
Stocked in pre-galvanized,
plain & powder coated SuprGreen, in both 10 20 ft.
lengths. Available in Stainless
Steel 304 & 316 Alloys.
Local 210 International
Brotherhood of Teamsters
All Products
Made in USA
15⁄8"
15⁄8"
⁄8"
13
13
⁄16"
⁄16"
31⁄4"
Other materials, finishes & lengths are
available upon request.
H-112
H-122
H-132
H-134
H-142
H-152
H-172
H-162
H-164
Size: 31⁄ 4" x 15⁄ 8" x 12 GA
Size: 27⁄ 16" x 15⁄ 8" x 12 GA
Size: 15⁄ 8" x 15⁄ 8" x 12 GA
Size: 15⁄ 8" x 15⁄ 8" x 14 GA
Size: 13⁄ 8" x 15⁄ 8" x 12 GA
Size: 1" x 15⁄ 8" x 12 GA
Size: 7⁄ 8" x 15⁄ 8" x 12 GA
Size: 13⁄ 16" x 15⁄ 8" x 12 GA
Size: 13⁄ 16" x 15⁄ 8" x 14 GA
Channel
Channel
Finishes
Channel
Channel
Channel
Materials
All H-Strut channels are stocked in the following finishes and
covered in the following specifications.
Suffix A
OS3
Suffix C3
Suffix C
Channel
All configurations illustrated are available in any H-Strut channels and
in any material or finish.
All combinations illustrated are available in any H-Strut channels and in any
material or finish.
Pre-Galvanized (PG)....................................ASTM A-653
Plain Steel.......................................ASTM A-1011-04-SS
Aluminum (Type 6063T6).............................ASTM B-221
Stainless Steel (Type 304&316)...................ASTM A-240
Channel
Styles
Welded Combinations
All H-Strut channels are produced from prime structual steel
covered in the following specifications.
Hot Dipped Galvanized (HDG).....................ASTM A-123
Zinc Trivalent Chromium (ZTC)..............ASTM B-633-85
Powder Coated Supr-Green.........................ASTM B-117
Powder Coated White, Black and Gray.......ASTM B-117
PVC Coating 40 ML Thickness.................Upon Request
Channel
Channel
13
⁄ 32” x 3” Slot, 4” on c­ enters
OS
9
⁄ 16” x 11⁄ 8” Slot, 2” on c­ enters
RS and RS-MOD
9
⁄ 16” or 3⁄ 4” Dia. Hole, 17⁄ 8” on centers
KO
7
ZTC
HDG
Supr-Green
PG
PVC
Aluminum
Plain Steel
Accessories
PIPE CLAMPS
Available in Tube
& Pipe Sizes
EMT Clamps
C-1101
FLAT PLATE FITTINGS
BEAM CLAMPS
1
⁄2" - 13
Set Screw
23⁄8"
13
⁄16"
A
Tubing Clamps
A
C-1102
Finish:
EZN, CPR. HDG
Material:
Mild Steel, Stainless 304 & 316
Other welded combinations available upon request.
See Haydon’s Engineering Catalog for all H-Strut® Metal Framing Systems products and accessories. www.haydoncorp.com
THREADED FASTENERS
CUSHION CLAMPS
C-1100
Stainless Steel
3"
⁄8" - 16
9
Threads Ø ⁄16"
3
Rod Couplers
All-Thread Rod
Hole Sizes: 1⁄4" thru 3⁄4" Finish: Electro-Galvanized
Lengths: 7⁄8" thru 2-1⁄4"
Length: 6 Ft.
C-1104
Universal Clamps
Material: Mild Steel, Stainless 304 & 316
ANGLE BRACKETS
53⁄8"
Bolt
Size "A"
3 ⁄8"
C-402
C-401
Beam Clamp
1 ⁄8"
1 ⁄8"
3 ⁄2"
51⁄8"
F-201
C-403
F-205
Square Washer
Beam Clamp
9
Two Hole Corner
Angle
A-304
No-Twist Corner
Angle (2 indent)
A-311
Four Hole
Angle
A-335
“Z"
Angle
Closure Strip
(Available in Plastic)
1
E-501
⁄ 2" or 3⁄ 4" Conduit
Connector Plate
3
⁄4"
H-142-IN
8"
4"
E-510
E-505
A
Concrete Insert
4-Hole Splice
Clevis with Splice
Clip
Snap Type
Fluorescent
Fixture Hanger
Concrete Insert
13
B-620-A
Double Post Base
A
H-152-IN
Available in Stainless Steel
Type 304 & 316
6"
GRIP LOCK NUTS
13⁄ 8" x 15⁄ 8" x 12
2"
4 1 ⁄4"
ACCESSORIES
Concrete Insert
4"
Conduit End Cap
B-620-SQ
41⁄4"
6"
Ø3⁄4"
4 Places
Single Post Base
4-Hole Splice Channel
CONCRETE INSERTS
⁄16" Hole Size
E-504
41⁄4"
6"
31⁄2"
* Use with H-132, H-134
H-164-IN
C-900
41⁄4"
6"
B-605
“U” Support
1" x 15⁄ 8" x 12
A-322
Universal Shelf
Bracket
B-601
4-Hole Splice Plate
31⁄2"
A-301
31⁄2"
15⁄8"
Use with H-132, H-164
Knock
Out
15⁄8"
4"
1
2"
15⁄8"
1
Ø3⁄4"
4 Places
1 ⁄8"
23⁄4"
ELECTRICAL ACCESSORIES
4"
41⁄8"
5
71⁄4"
5
A
Beam Clamp
POST BASES
1
9/16" Dia. for 1/2" ATR
2"
FITTINGS
A(I.D.)
Rigid Conduit Clamps
21⁄4"
⁄ 8” Dia. Knockout, 6” on centers
⁄ 16" x 15⁄ 8" x 14 Ga.
1000
Series
H-1200
Spot Insert
End Cap
N-1200
Square Nut
for Spot
Insert
Without Spring
Short Spring
Regular Spring
Long Spring
H-Block Rooftop Support Systems
®
95⁄16"
⁄2" Through
Hole
1
4"
Roller Size
Height
9 ⁄16"
5
95⁄16"
47⁄8"
1⁄2"
Through
Hole
Height
Strut Length
67⁄16"
Height
Base
Length
10.875"
Base Length
Width
Width
Base
Length
Base
Length
Base
Length
Width
Width
Width
HBS-BASE SERIES
HBS-10 SERIES
Applications
•
•
•
•
Solar Racking
Pipe & Conduit supports
Duct supports
HVAC supports
•
•
•
•
Cable Tray Systems
Air Conditioning supports
Roof Walkway supports
Customizable applications
HBS-6 SERIES
Mini H-Block
21⁄4"
3"
• No deteriorations
• Corners coated with high
visibility safety ANSI orange
• Dampens vibrations
• Compatible with rooftop
materials
• Resistance to freeze and thaw
Testing
All Rooftop Supports have been tested by an accredited independent
laboratory to the following:
• ASTM D575 Method B – Modified – Compression/Deflection
• ASTM D1171 Modified – Ozone Resistance
• Freeze/Thaw Environmental Simulation
•
•
•
•
•
•
53⁄16"
MA
IN DE
US
A
65⁄8"
HBS-CE EXTENSION SERIES
HBS-R ROLLER SERIES
®
4"
Specifications
• Made from 100% postconsumer recycled materials
• LEED Certifiable
• Patented
• Meets the Buy America Act
• American Reinvestment
Recovery Act (A.R.R.A.)
Width
HBS-CB BRIDGE SERIES
Specifications
New
Economical
Prod
Versatile
uct
Used for single pipe applications
Made from 100% post-consumer recycled materials
Corners coated with high visibility safety ANSI orange
Mounting and supporting without losing strength or integrity
5"
HBM-BASE ONLY SERIES
⁄8” - 16 x 9"
Threaded Rod
3
Height
H-164-PG
Strut Channel
Threaded
Base Plate
Height Adj.
from 10" to 12"
H-132-PG
Strut Channel
⁄8” - 16 x 9"
Threaded Rod
3
4"
413⁄16"
4"
MA
IN DE
US
A
MA
D
IN U E
SA
65⁄8"
HBM-5-H-164-PG
6 ⁄8"
5
5"
5"
HBM-HINGED PIPE CLAMP SERIES
MA
IN DE
US
A
65⁄8"
5"
HBM-SUPPORT WITH THREADED ROD EXTENSION
AUTHORIZED DEALER OF HAYDON CORPORATION PRODUCTS