Coated Fiberglass Sleeve NU-SLEEVE SG-240 NU-SLEEVE SG-240 is a fiberglass braided sleeve coated with a special high temperature silicone rubber. It is therefore an excellent thermal and electrical insulator, with high dielectric properties (Grade A sleeve) and high temperature of use (240°C/464°F). NU-SLEEVE SG-240 is non-flammable and has good mechanical properties. Typical applications include: coil and winding industry (coils, motors, generators, transformers…); lighting fixtures; transportation (mass transit, rail cars, locomotives…); commercial cookware (fryers, rotisseries, steamers…); heating and cooling; custom car markets and heavy truck market; and in many other industrial fields. Nu-Sleeve SG-240 Characteristics ● Colors: standard color is red oxide. Other colors upon request. ● Specifications: UL Approved. Physical properties Specification Unit Value -80/240 (-1 1 2/464) grade A pass Operating temperature - Abrasion resistance - °C (°F) - NEMA TF-1 - UL-1 441 VW-1 - Dielectrical properties Flammability good Excellent resistance to oils. Also good resistance to acids and alkalis, petroleum, water and organic solvents. Chemical resistance Dimensions Following sizes are from #24 thru 1 1 /2". Higher diameters available upon request. Packaging NU-SLEEVE SG-240 A AWG 24 NU-SLEEVE SG-240 A AWG 22 NU-SLEEVE SG-240 A AWG 20 NU-SLEEVE SG-240 A AWG 1 9 NU-SLEEVE SG-240 A AWG 1 8 NU-SLEEVE SG-240 A AWG 1 7 NU-SLEEVE SG-240 A AWG 1 6 NU-SLEEVE SG-240 A AWG 1 5 NU-SLEEVE SG-240 A AWG 1 4 NU-SLEEVE SG-240 A AWG 1 3 NU-SLEEVE SG-240 A AWG 1 2 NU-SLEEVE SG-240 A AWG 1 1 NU-SLEEVE SG-240 A AWG 1 0 NU-SLEEVE SG-240 A AWG 9 NU-SLEEVE SG-240 A AWG 8 NU-SLEEVE SG-240 A AWG 7 NU-SLEEVE SG-240 A AWG 6 NU-SLEEVE SG-240 A AWG 5 NU-SLEEVE SG-240 A AWG 4 NU-SLEEVE SG-240 A AWG 3 NU-SLEEVE SG-240 A AWG 2 NU-SLEEVE SG-240 A AWG 1 NU-SLEEVE SG-240 A 5/1 6 NU-SLEEVE SG-240 A AWG 0 NU-SLEEVE SG-240 A 3/8 NU-SLEEVE SG-240 A 7/1 6 NU-SLEEVE SG-240 A1 /2 NU-SLEEVE SG-240 A 5/8 NU-SLEEVE SG-240 A 3/4 NU-SLEEVE SG-240 A 7/8 NU-SLEEVE SG-240 A 1 NU-SLEEVE SG-240 A 1 1 /8 NU-SLEEVE SG-240 A 1 1 /4 NU-SLEEVE SG-240 A 1 1 /2 NEMA sizes 24 22 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 5/1 6" 0 3/8" 7/1 6" 1 /2" 5/8" 3/4" 7/8" 1" 1 1 /8" 1 1 /4" 1 1 /2" Minimum Ø (inches) Maximum Ø (inches) 0.020 0.025 0.032 0.036 0.040 0.045 0.051 0.057 0.064 0.072 0.081 0.091 0.1 02 0.1 1 4 0.1 29 0.1 44 0.1 62 0.1 82 0.204 0.229 0.258 0.289 0.31 3 0.325 0.375 0.438 0.500 0.625 0.750 0.875 1 .000 1 .1 25 1 .250 1 .500 0.027 0.032 0.039 0.044 0.049 0.054 0.061 0.067 0.074 0.082 0.091 0.1 01 0.1 1 2 0.1 24 0.1 41 0.1 58 0.1 78 0.1 98 0.224 0.249 0.278 0.31 1 0.334 0.347 0.399 0.462 0.524 0.655 0.786 0.91 1 1 .036 1 .1 61 1 .286 1 .536 Indicative nominal Ø (inches) (mm) 0.024 0.029 0.036 0.040 0.045 0.050 0.056 0.062 0.069 0.077 0.086 0.096 0.1 07 0.1 1 9 0.1 35 0.1 51 0.1 70 0.1 90 0.21 4 0.239 0.268 0.300 0.324 0.336 0.387 0.450 0.51 2 0.640 0.768 0.893 1 .01 8 1 .1 43 1 .268 1 .51 8 0.61 0.74 0.91 1 .02 1 .1 4 1 .27 1 .42 1 .57 1 .75 1 .96 2.1 8 2.44 2.72 3.02 3.43 3.84 4.32 4.83 5.44 6.07 6.81 7.62 8.23 8.53 9.83 1 1 .43 1 3.00 1 6.26 1 9.51 22.68 25.86 29.03 32.21 38.56 Delfingen_NU-SLEEVE_SG-240_industrial_v1 .0 Designation NU-SLEEVE SG-240 is delivered in spools, bulk spools or in cut lengths. Data and photos for information only. Delfingen makes no warranties as to the accuracy or completeness of this information. Delfingen reserves the right to make changes in materials or processing without notification. Corporate Headquarters: DELFINGEN Industry S.A., Rue Emile Streit, 25340 Anteuil, France Tel: +33 (0)3 81 90 73 00 • [email protected] www.delfingen.com
© Copyright 2024 Paperzz