Thickness Gages
SERIES 547, 7
•The digital models incorporate Mitutoyo's
popular ID-C and ID-S Series Digimatic
Indicators to provide error-free LCD
readings as well as data output for SPC
analysis.
•547-401 (547-400S) is ideally suited for
measuring thicknesses of paper, film, wire,
sheet metal and similar materials.
Thickness Gages offer a quick and efficient
means of inspection with their convenient
grip handle, thumb trigger and springloaded spindle. The various models cover a
wide range of applications.
FEATURES
•Wide range of applications with various
types of measuring faces (on the spindle
and anvil).
Standard Type / Digital
Functions of Digital Models
Ceramic spindle/
anvil
Origin-set/Preset, Zeroset, GO/±NG judgment, Counting
direction switching, Power ON/OFF, Simplified calculation,
Function lock, Data hold, Data output, inch/mm conversion
(inch/mm models)
Alarm:
Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
547-321
Optional Accessories
Deep Throat Type / Dial
Ceramic spindle/
anvil
Refer to the list of specifications
(excluding quantizing error)
Resolution:
0.01mm type
0.01mm
0.001mm type
0.001mm/0.001mm
.0005”/0.01mm type .0005”/0.01mm
.00005”/0.001mm type .0005”/.0001”/.00005”/
0.01mm/0.001mm
Display:
LCD
Scale type: ABSOLUTE electrostatic linear encoder
Max. response speed: Unlimited
Measuring force: Refer to the list of specifications
Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 7,000 hours under normal use
Dust/Water protection level: IP42 or IP53 (dust-proof type)
547-301
Standard Type / Dial
Technical Data of Digital Models
Accuracy:
Deep Throat Type / Digital
Ceramic spindle/
anvil
(Refer to page VIII for details.)
905338: SPC cable (1m) for digital models
905409: SPC cable (2m) for digital models
02AZD790F: SPC cable for U-WAVE (160mm)
902011: Spindle lifting lever (ISO/JIS type)*
902794: Spindle lifting lever (ANSI/AGD type)*
137693: Spindle lifting hook**
540774: Spindle lifting cable
125317: Spare rubber boot (for dust-proof type)
02ACA571:Auxiliary spindle spring for 25mm/1” models***
02ACA773:Auxiliary spindle spring for 50mm/2” models***
––––––:
Backs (See page F-40.)
––––––:
Contact points (See page F-36.)
Ceramic spindle/
anvil
*Can be used on 12mm/.5” models only.
**Can be used on 25mm/1” or 50mm/2” models.
***Required when orienting the indicator upside down.
7301
7321
DIMENSIONS
High Accuracy Type / Digital
Unit: mm
Parallelism: 5µm
7301, 7305, 7327
Parallelism: 10µm
547-301
ø10
DIMENSIONS
30
30
85
ø6.3
21
F
Parallelism: 3µm
547-401
ø10
120
547-401
175
Parallelism: 5µm (7321, 7323), 10µm (547-321)
F-56
Lens thickness measurement
DIMENSIONS
9.3
Unit: mm
30
Sø4 ball
30
ø6
ø4.8
Reversible anvil 12mm
85
SR3
Flat point
Ball point
Flat point
SR2
547-313
SR3
Anvil
Anvil
7313
Anvil
Tube thickness measurement
DIMENSIONS
ø3
Unit: mm
Sø3.5 ball
20
21
547-360
7360
Groove depth measurement
DIMENSIONS
Unit: mm
6 6
30
ø6.5
1
85
547-315
SPECIFICATIONS
Metric
Range
0 - 12mm
0 - 10mm
0 - 10mm
0 - 10mm
0 - 10mm
0 - 10mm
Digital Type
Order No. Resolution
547-401 0.001mm
547-301 0.01mm
547-321 0.01mm
547-313 0.01mm
547-315 0.01mm
547-360 0.01mm
Inch/Metric
7315
Digital Type
Range
0 - .47”
0 - .4” / 0 - .47”*
0 - .4” / 0 - .47”*
0 - .4” / 0 - .47”*
0 - .4” / 0 - .47”*
0 - .4” / 0 - .47”*
Order No.
547-400S /
547-300S / 547-500*
547-320S / 547-520*
547-312S / 547-512*
547-316S / 547-516*
547-361S / 547-561*
Resolution
.00005”/0.001mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
Accuracy
±3µm
±20µm
±20µm
±20µm
±20µm
±20µm
Measuring force
3.5N or less
1.5N or less
1.5N or less
1.5N or less
1.5N or less
1.5N or less
Remarks
High accuracy, carbide spindle/anvil
Standard, ceramic spindle/anvil
Deep throat, ceramic spindle/anvil
Lens thickness
Groove depth
Tube thickness
*using ID-S Digimatic indicator, Standard model with .0001”/0.001mm resolution ID-S is available (547-526).
Metric
Range
0 - 1mm
0 - 10mm
0 - 20mm
0 - 10mm
0 - 20mm
0 - 10mm
0 - 10mm
0 - 10mm
Dial Type
Order No. Dial reading
7327
0.001mm
7301
0.01mm
7305
0.01mm
7321
0.01mm
7323
0.01mm
7313
0.01mm
7315
0.01mm
7360
0.01mm
Inch
Range
0 - .05”
0 - .5”
0 - 1”
—
0 - 1”
0 - .5”
0 - .5”
0 - .5”
Dial Type
Order No.
7326S
7300S
7304S
—
7322S
7312S
7316S
7361S
Dial reading
.00005”
.001”
.001”
—
.001”
.001”
.001”
.001”
Accuracy
±5µm
±15µm
±20µm
±15µm
±22µm
±15µm
±15µm
±15µm
Measuring force
1.4N or less
1.4N or less
2.0N or less
1.4N or less
2.0N or less
1.4N or less
1.4N or less
1.4N or less
Remarks
Fine dial reading, ceramic spindle/anvil
Standard, ceramic spindle/anvil
Standard, ceramic spindle/anvil
Deep throat, ceramic spindle/anvil
Deep throat, ceramic spindle/anvil
Lens thickness
Groove depth
Tube thickness
F-57
F
Lightweight Dial Thickness Gage
SERIES 7
Application
Measuring paper thickness
DIMENSIONS
Measuring thickness of a human hair
Ceramic spindle/
anvil
7331S
SPECIFICATIONS
Metric
Unit: mm
ø10
Order No.
7331S
Range
0 - 10mm
Dial reading Accuracy
0.01mm
±20µm
25
Measuring force
1.4N or less
Parallelism: 5µm
120
33
ø10
Dial Caliper Gage
SERIES 209 — Internal Measurement Type
7355
These Dial Caliper Gages are comparison
gages, and should be used in conjunction
with a Setting Ring or a micrometer. The
caliper is spring loaded and makes point
contact at constant measuring force.
209-125
SPECIFICATIONS
Metric
Order No.
209-125
209-126
209-127
209-155
209-156
209-175
209-176
Range
6 - 18mm
10 - 22mm
20 - 32mm
5 - 15mm
10 - 20mm
10 - 30mm
20 - 40mm
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Range of opening*1
5.8 - 18.2mm
9.8 - 22.2mm
19.8 - 32.2mm
4.8 - 15.2mm
9.8 - 20.2mm
9.8 - 30.2mm
19.8 - 40.2mm
Dial face
0-100-100
0-100-100
0-100-100
0-100
0-100
0-100-100
0-100-100
Accuracy
±40µm
±40µm
±40µm
±30µm
±30µm
±40µm
±40µm
Measuring force
2.0N or less
2.0N or less
2.0N or less
2.0N or less
2.0N or less
2.0N or less
2.0N or less
*1: Range of opening is a value for reference. Accuracy is not guaranteed if the Dial Caliper Gage is used beyond the measuring range.
* Please note that this Dial Caliper Gage is only provided with standard models. Special size and special specification models are not supported.
DIMENSIONS
F
A
B
Movable
arm
21
Order No.
209-125
209-126
209-127
A
1.1
2.3
8.0
B
1.1
2.7
4.4
209-12x
61
Movable arm
Fixed arm
Order No. A
209-155 2.2
209-156 5.5
ø55
21
209-15x
F-58
Unit: mm
A
Movable arm
Fixed arm
Fixed arm
ø50
2.3
A
B
L
2.3
2.4
B
4.7
T
40
S ø1.6
4.7
2.3
1.5
T
Sharp edge
(SR0.2 or less)
2.3
Sharp edge
(SR0.2 or less)
B
2.2
5.5
L
26
28
T
1.2
1.5
Order No. A
209-175 5.5
209-176 10
ø55
21
209-17x
B
5.5
10
T
1.5
2.0
Dial Snap Gage
SERIES 201
FEATURES
201-101
with optional dial indicator
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
Order No.
201-101
201-102
201-103
201-104
201-105
201-106
201-107
201-108
201-109
201-110
201-111
201-112
Parallelism
5µm
5µm
5µm
5µm
5µm
5µm
5µm
5µm
5µm
5µm
5µm
5µm
Measuring force
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
Recommended dial indicator (optional)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
Measuring force
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
15N±3N
Recommended dial indicator (optional)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
2803SB-10 (.0001” reading)
Inch
Range
0 - 1”
1 - 2”
2 - 3”
3 - 4”
4 - 5”
5 - 6”
6 - 7”
7 - 8”
8 - 9”
9 - 10”
10 - 11”
11 - 12”
Order No.
201-151
201-152
201-153
201-154
201-155
201-156
201-157
201-158
201-159
201-160
201-161
201-162
Parallelism
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
.0002”
DIMENSIONS
(44)
40
Anvil
Unit: mm
40
(104.5)
(13.5)
Accuracy:
Refer to the list of specifications
Anvil retracting stroke: 2mm/.078”
Anvil positioning range: 25mm/1”
Anvil flatness:
1µm/.00004”
ø16
Technical Data
•Designed for quick GO/NG judgment
of diameters of cylinders and shafts in
machining processes.
•Dial indicator is optional.
•Anvil retracting stroke: 2mm/.078”
•Anvil positioning range: 25mm/1”
•Wide (13.5 x 12mm/1.53 x 47”), flat
carbide anvils.
•Both front edges of the anvil are
chamfered for easy workpiece insertion.
F
F-59
Roll Caliper
SERIES 310
SPECIFICATIONS
FEATURES
• The Roll Caliper is the most widely used
instrument for checking the diameter of
rollers used in the manufacture of many
products such as metal, rubber and paper.
• Performs fast and accurate comparison
measurements of roller diameter with the
roller still mounted on a machine tool.
• Various types of detectors (dial indicator,
Digimatic indicator, Mu-Checker gage
head, etc.) can be attached according to
the required accuracy and workpiece size.
Metric
Inch
Range
ø500 - ø1400mm
ø400 - ø1050mm
ø275 - ø825mm
ø200 - ø600mm
ø100 - ø450mm
Order No.
310-131
310-132
310-133
310-134
310-135
Range
ø20” - ø56”
ø16” - ø42”
ø11” - ø32”
ø8” - ø24”
ø4” - ø17”
Order No.
310-141
310-142
310-143
310-144
310-145
310-132
with optional dial indicator
Contact Force Gage
Application
SERIES 546
Measuring contact force of a relay
FEATURES
•Measures small forces applied to the end
of its measuring lever in units of newtons (N).
•Contact Force Gages are widely used to
determine the measuring force applied by
an instrument to a workpiece, as well as
contact forces of electrical relays, microswitches, valves and precision springs.
•Convenient peak-hold type gages are also
available.
DIMENSIONS
Unit: mm
546-112
Standard type
546-119
Standard type
39.5 (49.5)
546-137
Peak hold type
Fulcrum
0.8
Standard
Minimum reading
2mN
5mN
10mN
0.02N
0.05N
0.05N
0.1N
0.2N
15
Peak hold
Order No.
546-112
546-113
546-114
546-115
546-116
546-117
546-118
546-119
Range
6mN - 50mN
10mN - 100mN
30mN - 300mN
0.06N - 0.5N
0.1N - 1N
0.15N - 1.5N
0.3N - 3N
0.6N - 5N
Graduation
5mN
10mN
0.02N
0.05N
0.05N
0.1N
0.2N
Order No.
546-133
546-134
546-135
546-136
546-137
546-138
546-139
Range
10mN - 100mN
30mN - 300mN
0.06N - 0.5N
0.1N - 1N
0.15N - 1.5N
0.3N - 3N
0.6N - 5N
V-Block Set
55
1.5
19
33.5 (43.5)
( ): 546-112, 546-113, 546-133
DIMENSIONS
SERIES 181
Unit: mm
FEATURES
•Two V-blocks per set.
•Magnetic type is available. (The magnetic
type V-block is not provided with a
workpiece clamp.)
20.
31.8
5
SPECIFICATIONS
F
Metric
Max. workpiece dia. Order No.
25mm
181-902
47
Hole ø1
SPECIFICATIONS
Inch
Max. workpiece dia. Order No.
1”
181-901
Remarks
With clamp
F-60
Remarks
With clamp
13.
5
31.
8
41
Magnetic Stands
SERIES 7
DIMENSIONS
Unit: mm
20° adjustable
20
20
Stem hole ø4
Stem hole ø8
(with bushing), ø9.53mm
ø10
47
M8×1.25
M8×1.25
55
55
47
232
ø12
150
177
165
177
232
ø10
ø12
Stem hole ø4
Stem hole ø8
(with bushing), ø9.53mm
150°
5
5
50 (W)×58 (D)
150°
5
5
50 (W)×58 (D)
7011S-10
6° adjustable
7010S-10
81
74
180°
7011S-10
360°
Bush
340°
12.7
ø8
112
Mitutoyo's Magnetic Stands accept all dial
indicators and dial test indicators. The ONOFF switch offers instant mounting and
dismounting without any adverse effect on
the indicators or workpiece surface.
ø8
ø6
ø6
Dovetail
ø6
7010S-10
Ball-joint
25
106
431
136
Stem hole
ø9.53 (3/8”)
360°
ø30
(ø34)
280°
7014
M8×1.25
55
102
Dovetail
7014
No magnet force ON/OFF
ø8
(ø6 Exchaning a Bush)
12
0°
37
6
360°
340°
(160)
10
57
0°
15
360°
4
12
Dovetail
7.5
ø8
150°
43
7019B
51
6
50 (W) ×60 (D)
13
10
150°
4
30.4 (W)×35.7 (D)
7019B
7031
ø6
70
8
ø9.53
101
360°
(303)
340°
10
6
150°
55
13.5
360°
M8×1.25
7032
SPECIFICATIONS
111
0°
7031
7032
6
50 (W)×61.5 (D)
Order No.
7010S-10
7011S-10
7014
7014E
7019B
7031
7032
Description
Magnetic stand
Magnetic stand
Mini magnetic stand
Mini magnetic stand
Universal magnetic stand
Universal magnetic stand
Universal magnetic stand
Applicable holding stem dia.
ø4mm, ø8mm, ø9.53mm (3/8”)
ø4mm, ø8mm, ø9.53mm (3/8”)
ø6mm, ø8mm
ø4mm, ø9.5mm
ø8mm, ø9.53mm (3/8”)
ø6, ø8mm
ø6, ø8mm, ø9.53mm (3/8”)
F-61
Dovetail groove
—
—
Provided
Provided
Provided
Provided
Provided
Remarks
—
With fine adjustment
Without magnet ON/OFF
Without magnet ON/OFF
With hydraulic position lock
With mechanical locking system
With mechanical locking system
F
Dial Gage Stands
SERIES 7
FEATURES
Dial Gage Stands are designed for comparison measurements of size using a dial
indicator or Digimatic Indicator.
• Vertical travel of the gage holder — Dial
Gage Stand: 95mm (7007-10: 90mm),
Transfer Stand: 320mm
• Fine-adjustment of 1mm is provided for
zero-setting the indicator.
• With interchangeable anvil. Domed anvil
(101463) is optional.
Optional Accessories
101461: Hardened steel flat anvil
101462: Hardened steel serrated anvil
101463: Hardened steel domed anvil*
*Not available for 7007-10
7001-10
with ø58mm serrated anvil
7002-10
with ø58mm flat anvil
7007-10
90mm square anvil
14
SPECIFICATIONS
Metric
Stem hole
ø8mm, ø9.53mm
ø8mm, ø9.53mm
ø8mm, ø9.53mm
ø58
Remarks
With serrated anvil
With flat anvil
With square anvil
101461
14
Order No.
7001-10
7002-10
7007-10
DIMENSIONS
ø58
Unit: mm
101462
ø30
ø8
Bush
Column clamp
Fine adjustment
50
Stem hole
ø8, ø9.53
ø32
205
160
SR20
Indicator clamp
Anvil
Flatness: 1.3µm
45
ø58
7001-10, 7002-10
168
110
ø30
80
ø8
205
160
50
Bush
Stem hole
ø8, ø9.53
Anvil
Flatness: 1.3µm
Indicator clamp
45
90
Column clamp
Fine adjustment
F
7007-10
168
110
F-62
ø58
11
26
80
101463
Transfer Stand
SERIES 519
FEATURES
Transfer Stands are designed for comparison
measurements of size using a dial indicator
or Digimatic Indicator.
14
• Vertical travel of the gage holder — Dial
Gage Stand: 95mm (7007-10: 90mm),
Transfer Stand: 320mm
• Fine-adjustment of 1mm is provided for
zero-setting of the indicator.
• With interchangeable anvil. Domed anvil
(101463) is optional.
Optional Accessories
1414
ø58
101461: Hardened
steel flat anvil
101463: Hardened steel domed anvil
519-109-10
with ø58mm serrated anvil
ø58
ø58
ø32
SR20
11
14
26
101461
SPECIFICATIONS
Metric
ø58
ø58
101463
SR20
Stem hole
ø8mm, ø9.53mm
Remarks
With serrated anvil
DIMENSIONS
11
26
ø32
Order No.
519-109-10
Unit: mm
ø30
ø58
80
ø8
50
Bush
Stem hole
ø8, ø9.53
Column clamp
Fine adjustment
430
385
Bush setting
screw
Anvil
Flatness: 1.3µm
45
ø58
Indication clamp
168
110
F
F-63
Granite Comparator Stands
SERIES 215
Mitutoyo's Granite Comparator Stands are
basic building-blocks for the assembly of
special-purpose, precision measuring equipment. By mounting precision measuring instruments such as Digimatic indicators, Mu-
Checker Cartridge Heads, and Linear Gages
onto the stands, it is possible to handle all
manner of measuring applications. The rigid
granite base is free from burrs, pileups, rust,
and deterioration over time.
215-153-10
SPECIFICATIONS
Order No.
215-151-10
215-153-10
215-156-10
Granite base size (W x D x H)
150 x 200 x 50mm
200 x 250 x 80mm
300 x 250 x 80mm
Column travel
250mm
260mm
275mm
Stem hole
ø8mm, ø9.53mm
ø8mm, ø9.53mm
ø8mm, ø9.53mm,
ø20mm
Remarks
With fine adjustment of 1mm range
With fine adjustment of 1mm range
With fine adjustment over the entire travel
DIMENSIONS
300
ø40
Fine
adjustment
Stem hole
ø8, ø9.53
ø8
Bush
Fine
adjustment
Stem hole
ø8, ø9.53
ø8
Bush
60
Column
clamp
Indicator
clamp
Base
Flatness: 3µm
41
200
Indicator
clamp
46
250
150
215-151-10
Column travel: 0 - 250mm
200
215-153-10
Column travel: 0 - 260mm
ø50
ø8
400
100
115
ø9.53
Bush
Bush
Stem hole
Column clamp
Indicator clamp
80
Base Flatness: 3.5µm
F
Column
clamp
Base
Flatness: 3.5µm
80
50
Unit: mm
95
320
80
50
ø30
51
300
250
215-156-10
Column travel: 0 - 275mm
F-64
Optional Accessories
21JAA329: ø8mm bush
21JAA330: ø9.53mm bush
21JAA331: ø15mm bush
only available for 215-156-10
Comparator Stands
SERIES 215
Comparator Stands consists of a very stable,
cast-iron base and an upright column with a
mounting bracket that features fine adjustment. The grid type anvil prevents very flat
workpieces from wringing to it.
215-405-10
SPECIFICATIONS
Optional Accessories
21JAA329: ø8mm bush*
21JAA330: ø9.53mm (3/8”) bush*
21JAA331: ø15mm bush*
Order No. Square anvil size (W x D)
215-405-10 110 x 110mm
215-505-10 150 x 150mm
Column travel Stem hole
235mm
ø8mm, ø9.53mm
275mm
ø8mm, ø9.53mm,
ø20mm
*Only available for 215-505-10.
Remarks
With fine adjustment of 1mm range
With fine adjustment over the entire travel
DIMENSIONS
ø40
Unit: mm
95
Fine adjustment
Column clamp
320
60
Stem hole
ø8, ø9.53
ø8
Bush
Indicator clamp
Anvil
Flatness: 2.3µm
110
54
215-405-10
Column travel: 0 - 235mm
134
201
ø50
115
ø9.53
Bush
Bush
Stem hole
ø8, ø9.53, ø20
400
100
ø8
150
Column clamp
Anvil
Flatness: 2.3µm
Indicator clamp
64
215-505-10
Column travel: 0 - 275mm
255
179
F-65
F