Lobo Table
specifications
Lotz Armor Edge™ Tops: (Model #’s -- LOB7XXX)
The core material is 1.125” thick MDF (medium density
fiberboard). MDF is a superior material for screw holding
abilities exceeding 250 lbs., breaking strength and load
tests. The back material is phenolic which prevents
moisture penetration to core material. High pressure
laminate is bonded to the MDF core. The edge material is
Lotz Armor Edge™, a polyurea, which is extremely strong
and durable. This edge will not separate from the MDF
core material. Top surface choice of most Wilsonart matte
finish laminates or chemical resistant laminate.
3mm Tops: (Model #’s -- LOB6XXX)
The core material is 1.125” thick particle board with a
phenolic backer sheet and high pressure laminate on
top. 3mm edge banding is applied to all four sides, radius
corners.
Hardwood ButcherBlock Tops: (Model #’s -- LOB9XXX)
1.75” thick hardwood strips with two coats catalyzed clear
lacquer top and sides with one clear coat bottom with
eased edges and corners, .125” radius all corners/edges.
Phenolic Tops: (Model #’s -- LOB8XXX)
1” thick black phenolic resin and cellulose fiber composite
top with .125” eased edges and corners with high
resistance to chemicals, humidity and abrasions.
Lobo Frame:
The solid steel apron frame is 1” x 2”, 16-gauge steel that
is MIG welded using a 10-gauge reception plate with (1)
.375” hole drilled for leg mounting with .3125” bolt and
locking washer and nut from leg. The frame has welded
tabs at preset locations used for fastening the apron
frame to the back of the table top. Optional leg gussets.
Lobo Legs:
Fixed - 1.5” square, order -FX
28.5” fixed legs for the Lobo Series are 1.5” square, 14gauge square tube with one (1) .3125” bolt for attachment
to the apron. Nylon adjustment glide with a .375” stud with
a 1” travel path. Welded plate and #10 screws to secure leg
to top.**
Adjustable - 1.5” square, order -ADJ
Adjustable - 2” square Big Paw, order -ABP
Adjustable - 2” round, order -ALR
The adjustable leg options include a 1.5” or 2”, 14-gauge
square or 2”, 14-gauge round outside tube with two (2)
holes for positive contact and safety with adjustability. The
inner portion of the leg is a 1.25” square or 1.75” round,
16-gauge tube which is flow-drilled with tapped holes.
The inner leg section is fabricated to fit into the upper
leg assembly. The 1.5” square leg can adjust from 22.5”36.5” and the 2” square and round legs can adjust from
22.25”-36.25”, these adjustments are made through two (2)
screws into the tapped holes of the lower leg. The button
head machine screws are M6 allen head screws. Nylon
adjustment glide with a .325” stud with a 1” travel path.
Welded plate and #10 screws to secure leg to top.**
Gorner Gusset Kit:
Recommended for any Lobo tables with caster option,
table size that exceeds 30” x 72” or intended table use
heights greater than 31” for increased stability.
Stainless Steel Tops: (Model #’s -- LOB0XXX)
1.625” thick stainless steel top with wrapped and welded
edges and corners with particle board core, phenolic
backer. 16-gauge, type #304 finish stainless steel. This is
not intended for heavy washdown areas.
Finish:
The apron frame and the leg assembly are powder
coated with a polyester texture black finish to 3mil
in thickness as standard. Smooth silver (-SS) finish is
available ONLY on adj. legs.
Textured Black
-FX, -ABP, -ADJ & -ALR Legs
Epoxy Tops: (Call for part #)
An optional 1” epoxy resin top with .125” eased edge is also
available providing the greatest combination of physical
and chemical resistance property as well as heat and flame
resistance.
Smooth Silver
-ADJ & -ALR legs ONLY
Shipping Class:
70, unassembled. * Weight shown on next page is
based on Lobo table with Lotz Armor edge™ top and
1.5” square adjustable legs. Other leg or edge options
will change the weight of the table.
** Tops not pre-drilled for leg plate screws. Field drilling and attachment is required.
Recommended to field-drill phenolic & hardwood tops for leg plate screws.
See Catalog for sizes of hardwood and maple tops that come in 2 pieces and need to
be field assembled with joint connector bolt.
V032717 Specs subject to change.
wibe nc hmfg. com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Lobo Table
specifications cont.
Lobo Features:
0.3125” bolt secures
leg to 10-gauge
recepƟon plate
Welded plate and
#10 screws secure leg
to top
Bolt-on leg gussets
provide increased
stability (opƟonal)
0.375” threaded nylon
glides (standard)
Adjustable legs adjust
in 1” increments with
tamper resistant screws
2” (50mm), dual wheel
casters raises heights by
approx. 2” (opƟonal)
2.5” Grand Hank Glide
(opƟonal)
3” heavy-duty casters
raises heights by 4”
(opƟonal)
Laminate Rectangle Tables:
Armor Edge™
Model #
Wgt*
3mm Edge
Model #
Wgt*
D
L/W
LOB7067
59
LOB6067
24
36
54
LOB7068
66
LOB6068
24
42
64
LOB7069
72
LOB6069
24
48
70
LOB7070
79
LOB6070
24
54
76
LOB7071
85
LOB6071
24
60
82
LOB7072
98
LOB6072
24
72
94
LOB7073
111
LOB6073
24
84
107
LOB7074
124
LOB6074
24
96
119
LOB7078
68
LOB6078
30
36
66
LOB7079
75
LOB6079
30
42
73
LOB7080
83
LOB6080
30
48
80
LOB7081
92
LOB6081
30
54
88
LOB7082
99
LOB6082
30
60
96
LOB7083
116
LOB6083
30
72
111
LOB7084
131
LOB6084
30
84
126
LOB7085
147
LOB6085
30
96
141
LOB7088
77
LOB6088
36
36
74
LOB7089
85
LOB6089
36
42
82
LOB7090
94
LOB6090
36
48
90
LOB7091
104
LOB6091
36
54
100
LOB7092
114
LOB6092
36
60
109
LOB7093
131
LOB6093
36
72
126
LOB7094
151
LOB6094
36
84
145
LOB7095
168
LOB6095
36
96
161
LOB7098
95
LOB6098
42
42
91
LOB7099
129
LOB6099
42
60
124
LOB7100
147
LOB6100
42
72
141
LOB7107
121
LOB6107
48
48
116
LOB7108
141
LOB6108
48
60
135
LOB7109
163
LOB6109
48
72
156
LOB7111
212
LOB6111
48
96
202
* Wgt based on adjustable legs. -2 lbs for fixed legs; +2 lbs. for Big Paw legs
Round
Trapezoid
Kidney
Horseshoe
Square
Clover
Laminate Round Tables:
Armor Edge™
Model #
Wgt*
3mm Edge
Model #
Wgt*
D
L/W
LOB7190
LOB7191
LOB7192
LOB7194
60
77
94
134
LOB6190
LOB6191
LOB6192
N/A
58
74
91
N/A
36
42
48
60
36
42
48
60
Laminate Shaped Tables:
Armor Edge™
Model #
Wgt*
3mm
Model #
Wgt*
D
W
Front
Width
LOB7212 - Trap
LOB7211 - Trap
LOB7220 - Kidney
LOB7226 - Horseshoe
LOB7250 - Clover
58
77
135
114
80
LOB6212
LOB6211
LOB6220
LOB6226
LOB6250
56
75
130
110
77
24
30
48
48
48
24
30
72
72
48
48
60
N/A
N/A
N/A
* Wgt based on adjustable legs. -2 lbs for fixed legs; +2 lbs. for Big Paw legs
Please see catalog for additional top options/sizes.
LOB7250-ADJ
LOB8082-FX w/casters
V032717 Specs subject to change.
wibe nc hmfg. com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303