Chamada para 1ª Etapa do Processo Seletivo Fraunhofer IPT 2017 Engª Elétrica, Mecânica, Mecatrônica, Produção e Química.
Está aberto a 1ª Etapa do Processo Seletivo para realização de Estágio com
duração de 1 ano e início em julho/agosto de 2017 no Instituto de Pesquisa
Tecnológicas Fraunhofer em Aachen na Alemanha, restrito para estudantes dos
cursos de Engª Elétrica, Mecânica, Mecatrônica, Produção e Química.
Regulamento:
1
- O processo seletivo é direcionado aos alunos do 5º semestre em diante,
alunos de semestres anteriores não poderão participar.
2
- Aqueles que tiverem interesse terão que confeccionar o Curriculum Vitae
(C.V.) em Inglês ou Alemão dentro do Padrão Europeu com foto - Segue link
para confecção do documento:
2.1
- Link: http://europass.cedefop.europa.eu/en/documents/curriculum-vitae
3
- Será necessário fazer uma Carta de Motivação em Inglês ou Alemão
explicando o motivo de você ser apto de fazer esse estágio.
4
- Duração: O estágio no Instituto Fraunhofer IPT Aachen terá duração de 1
ano e 15 dias, com início em julho/agosto de 2017. Podendo realizar trabalho de
conclusão de curso durante o trabalho na Alemanha.
5
– Remuneração: O estágio no Instituto Fraunhofer IPT Aachen é
remunerado pela própria instituição ao estagiário, sendo um valor que garante
uma boa permanência no país, suficiente para garantir os custos de moradia,
alimentação e lazer. Valor será combinado na assinatura de contrato. A Facens
não possui poder de interferir no valor por eles estabelecidos.
6
- Prazo limite para inscrição: 05 de abril de 2017 - 23h59.
6.1
- Não serão aceitas inscrições após o dia 05 de abril de 2017 - 23h59.
7
- Este Processo contempla apenas a 1ª etapa e visa identificar alunos
aptos a participar da 2ª etapa.
7.1- 2ª Etapa: processo seletivo a ser realizado pelo Fraunhofer IPT Aachen com
a participação de alunos de outras Universidades Brasileiras.
7.2 - Desta forma, não é garantido que os alunos selecionados neste processo 1ª etapa, irão ser escolhidos na 2ª etapa, pois está demandará da análise da
equipe avaliadora do Instituto Fraunhofer, o qual não temos poder de interferir.
8 – No anexo a seguir, constam as vagas que os candidatos podem tentar
candidatar-se.
9 – CV, Carta de Motivação, bem como um documento indicando qual vaga o
candidato possui interesse (podendo selecionar até 3 (três) opções), devem ser
colocados em um único arquivo zip e submetido através do Blackboard.
Boa Sorte
Departamento de Relações Internacionais Facens
[email protected]
ANEXO – Vagas disponíveis
APPLICATION GUIDELINE
Required documents




Curriculum in German or English (German standard, which includes a picture)
Motivation letter in German or English
Recommendation letter (optional)
Certificates (optional)
Elaboration of documents

For curriculums in German, we recommend (not mandatory) to use the available samples provided by the social
media XING: https://lebenslauf.com/

For curriculums in English, we recommend to follow the German standard formats available in the abovementioned website, adapting it to English

For each position, there is a Reference Number. The students have to express clearly which position or
positions they are applying for. It’s up to the student how to inform these priorities, wheter into the curriculum
(for instance creating a additional topic) or into the motivation letter
Preselection

The partner university cooperates with our Institute implementing a preselection and has autonomy to add any
eligibility criteria or even request from the student any other document
Arrival in Aachen

The student must arrive in Aachen at least 7 working days before the stipulated contract start date
Contract duration

For all positions, it’s required to stay at our Institute at least for 1 year and 15 days
Payment
 The monthly salary is enough to cover all mean basic expenses including rent, food, health insurance,
transport etc.
IPT and WZL
 Students for position 2017-2-15 and 2017-2-16 will work at our neighbor and partner Insitute WZL
S TUDENT ASSIS TANT
ULTRA–PRECISION GRINDING
Your Task








Supervising the ultra-precision grinding machine
Design of experiments for grinding, carrying out test series
Programming in G-code, NC-programming
Operation of 5-Axes CNC Machine
Metrological qualification of processed results
Evaluation and documentation of machining results
Modelling in Siemens NX (CAD)
Assembly of mechanical components
What we expect from you








You study Mechanical Engineering, Electrical Engineering, Mechatronics or other related studies
You are fluent in English
Basic knowledge in German is a plus
Good knowledge in G-Code
Previous experience with CNC machining process is a plus
Good knowledge in CAD modeling
Very good capacity for work carefully, organized and independently
You are curious about new tasks, take initiative and show responsibility
Start on 16th August 2017
Reference Number: 2017-2-01
S TUDENT ASSIS TANT
COATING PROCESSES ON PRECISION GLASS MOLDING TOOLS
Your Task




Quality inspection and control on coating processes
Experimental research and analysis of glass coating degradation mechanisms
Preparation of specimens (cleaning, metrology and quality inspection)
Documentation of experiments data
What we expect from you




You study Mechanical Engineering or something related with material science
You have very good English language skills
You are curious, take initiative and show responsibility
You have good knowledge/experience with Microsoft Office applications (MS Word, MS Excel, MS
PowerPoint)
 Basic knowledge in German is a plus
Start on 16th July 2017
Reference Number: 2017-2-02
S TUDENT ASSIS TANT
MILLING STRATEGIES WITH CERAMIC TOOLS AND BLISK
MILLING STRATEGIES FOR AEROSPACE INDUSTRY
Your Task








Operate a 5-axis CNC machine
Machining and preparation of workpieces
Design of experiments
Evaluation of experiments (forces, metallography, hardness, tool wear, surface quality)
Modelling in NX-Siemens or other CAD
Programming with MasterCAM
Simulation of milling process
Optimization of milling parameters
What we expect from you










You study Mechanical Engineering, Electrical Engineering, Mechatronics or other related studies
You can communicate in German (preferred) or/and in English
Good knowledge in MS Office
Very good capacity for teamwork
You are interested in machining processes
You are curious, take initiative and show responsibility
Good knowledge in G-Code programming (handwriting) is a plus
Knowledge in CAD/CAM software (NX and MasterCAM) is a plus
Good knowledge in force analyze software (Diadem) is a plus
First contact with milling/drilling machining process is a plus
Start on 16th July 2017
Reference Number: 2017-2-03
S TUDENT ASSIS TANT
DESIGN OF CUTTING EXPERIMENTS, PRODUCTION OF
MANUFACTURE PARTS AND MAINTENANCE
Your Task









Programming in G-code
Machining and preparation of workpieces
Operation of 3 and 5-axis machining centers
Design and execution of machining experiments
Handling of measurement devices
Modelling components with CAD and CAM
Evaluation and analysis of test results under supervision
Support maintenance and service of the test facilities
Construction and assembly of mechanical components
What we expect from you








You study Mechanical Engineering or other related studies
You are fluent in German
You like hands on work
Basic knowledge in English is a plus
First experience with CNC machining process is a plus
First experience programming in G-code is a plus
Very good capacity for teamwork
You are curious, proactive and responsible
Start on 16th July 2017 or 1st August 2017
Reference Number: 2017-2-04
S TUDENT ASSIS TANT
HIGH PERFORMANCE MACHINING
Your Task





Programming in G-code right at the machine and CAM based
Operation of 5-Axis CNC Machine’s
Modeling and creating of drawings in Siemens NX
Implementation of cutting tests and evaluation and documentation of tools and machining results
Frequent maintenance of parameters of operation on CNC Machines
What we expect from you






You study Mechanical Engineering, Electrical Engineering, Mechatronics or other related studies
You are fluent in English
Advanced knowledge in German is a plus
You are interested in milling and turning processes
You are curious, take initiative and show responsibility
Modeling and machining in Mastercam X9 CAD/CAM Software is a plus.
Start on 1st (preferably) or 16th July 2017
Reference Number: 2017-2-05
S TUDENT ASSIS TANT
WATER JET GUIDED LASER ABLATION MACHINING
Your Task
 Autonomous familiarization with machine controls for systems in the field of water jet guided laser
machining (LaserMicroJet®)
 NC-Programming in G-code
 Supporting research and process development activities using the LaserMicroJet®
 Evaluation and documentation of machining results
 Literature research
What we expect from you






You study Mechanical Engineering or other related studies
Good knowledge in G-code
You are curious, take initiative and show responsibility
You are fluent in English
You are fluent in German (not mandatory but it’s a plus)
You have previous experience with laser process or water jet machining (not mandatory but it’s a
plus)
Start on 1st (preferably) or 16th July 2017
Reference Number: 2017-2-06
S TUDENT ASSIS TANT
WATERJET MACHINING
Your Task






Experiments for waterjet machining
Programming in G-code of 3-Axes CNC Machine
Operation of 5-Axes CNC Machine
Documentation of machining results
Drawing with Autocad, NX, Rhino, Solidworks
Maintenance and careful with the machine components
What we expect from you









You study Mechanical Engineering or Material Engineering
You are fluent in English or German
Very good capacity for teamwork
You are interested in waterjet machining processes
Basic knowledge in NC-programming
Good knowledge in CAD drawing, Microsoft Excel, Powerpoint and Word
Basic knowledge in German is a plus
Basic knowledge in waterjet machining is a plus
You are curious, organized, focused, take initiative and show responsibility
Start on 1st (preferably) or 16th July 2017
Reference Number: 2017-2-07
S TUDENT ASSIS TANT
LASER STRUCTURING
Your Task





Support for the implementation of R&D projects
Planning, implementation and analysis of process investigations at a 5+4 axis laser systems
Evaluation and documentation
Realization of test setups
Literature research
What we expect from you





You study Mechanical Engineering or other related studies
You are curious, take initiative and show responsibility
You are fluent in English
You are fluent in German (not mandatory but it’s a plus)
You have previous experience with laser process (not mandatory but it’s a plus)
Start on 1st (preferably) or 16th July 2017
Reference Number: 2017-2-08
S TUDENT ASSIS TANT
HOT EMPOSSING OF NANO- AND MICROSTRUCTURES
Your Task




Design of experiments for embossing processes and subcomponent tests
Modelling of test bench components in SolidWorks and assembling
Evaluation and documentation of machining results
Simulation with Ansys
What we expect from you






You study Mechanical Engineering, Mechatronics or other related studies
You are fluent in English or German
You like hands on work and crafting
First experience with or the drive to learn MatLab
You are curious, take initiative and show responsibility
Very good capacity for teamwork
Start on 1st July 2017 (preferable) or 16 th July 2017
Reference Number: 2017-2-09
S TUDENT ASSIS TANT
INTELLIGENT PROCESS MONITORING
Your Task






HMI programming with C#/.NET
Commissioning of real-time fieldbus systems with TriaLink
C/C++ real-time programming with RTX64
Signal processing of measurement data with MATLAB/Simulink
Execution of tests for process monitoring with multi-sensor systems
Documentation of results
What we expect from you






You study Electrical Engineering, Mechatronics or other related studies
You are fluent in English
Good Knowledge of MATLAB or Signal Processing
Advanced knowledge in German is a plus
You are interested in milling and turning processes
You are curious, take initiative and show responsibility
Start on 16th July 2017
Reference Number: 2017-2-10
S TUDENT ASSIS TANT
MANUFACTURING HIGH PRECISION OPTICS THROUGH
INJECTION MOLDING
Your Task






CAD design, construction and assembly of injection molding tools in SolidWorks
Injection molding process analysis and optimization
Operation of electrical and hydraulic injection molding machines
Design, construction and assembly of robot grabbing systems
Parts measurement
Simulation in Autodesk Moldflow
What we expect from you






You study Mechanical Engineering, Automation Engineering, Mechatronics or other related studies
You are fluent in English
Basic knowledge in German
Very good capacity for teamwork
You are interested in injection molding processes
You are curious, take initiative and show responsibility
Start on 16th July 2017
Reference Number: 2017-2-11
S TUDENT ASSIS TANT
COMPOSITE MANUFACTURING VIA AUTOMATED TAPE
PLACEMENT
Your Task






Operation of machines and systems for the automated processing of fiber/reinforced tape
Evaluation and documentation of machining results
Assembly of electromechanical components
Thermoforming of tailored blanks
Mechanical testing of the specimens
Optical analysis of the specimens
What we expect from you





You study Mechanical Engineering, Material Engineering, or other related studies
You are fluent in English or German
You are interested in Fiber-reinforced Plastics with laser/assisted production processes
You are curious, take initiative and show responsibility
Basic programming skills
Start on 16th July 2017
Reference Number: 2017-2-12
S TUDENT ASSIS TANT
COMPOSITE MANUFACTURING VIA AUTOMATED TAPE
PLACEMENT
Your Task





Operation of tape winding & placement machine
Programming in G-code
Thermoforming of tailored blanks
Mechanical testing of the specimens
Optical analysis of the specimens
What we expect from you






You study Mechanical Engineering, Material Engineering, or other related studies
You are fluent/advanced in either English or German
German is desired, but not obligatory
You are curious, take initiative, show responsibility and punctuality
SolidWorks knowledge is a plus
Knowledge in G-code is a plus
Start on 16th July 2017
Reference Number: 2017-2-13
S TUDENT ASSIS TANT
LASER SYSTEM TECHNOLOGY
Your Task





Design of experiments for laser aided punching process
Material analysis
Evaluation and documentation of experiments results
Modelling in SolidWorks
Preparation of the punching equipment
What we expect from you





You study Mechanical Engineering, Material Engineering, Mechatronics or other related studies
You are fluent in English
Basic knowledge in German is a plus
Very good capacity for teamwork
You are interested in laser technology processes
Start on 16th July 2017
Reference Number: 2017-2-14
S TUDENT ASSIS TANT
POST PROCESSING OF THERMAL IMAGES ON MILLING
CUTTING USING MATLAB
Your Task




Programming in MATLAB
Execution of machining experiments
Extracting the data
Analyzing of data
What we expect from you








You study Mechanical Engineering, Electrical Engineering, Mechatronics or other related studies
You are fluent in English or German
You are interested in machining processes
Good knowledge in programming, especially in MATLAB
Basic knowledge in German is a plus
First experience with machining process is a plus
Very good capacity for teamwork
You are curious, take initiative and show responsibility
Start on 16th July 2017
Reference number: 2017-2-15
S TUDENT ASSIS TANT
MODEL-BASED ONLINE TOOL MONITORING FOR GEAR
HOBBING PROCESS
Your Task
 Programming in MATLAB
 Perform experiments
 Develop a module to monitor the progress of tool wear in hobbing processes
What we expect from you






You study Mechanical Engineering, Electrical Engineering, Mechatronics or other related studies
You are fluent in English or German
Capacity for teamwork
You are interested in machining processes
You are curious, take initiative and show responsibility
Intermediate knowledge in MATLAB and will to learn more
Start on 16th July 2017
Reference Number: 2017-2-16