CRIJO PET PRODUCTS, LLC.
14x14 Sisal
Figure 2
Accessories Attachment Instructions
DOC120927-2
CRIJO PROPRIETARY INFORMATION FOR CUSTOMER USE ONLY
PATENT PENDING
2012 CRIJO PET PRODUCTS, LLC
Reference 1:
Using Thumb Screws
3/4” Long
Thumb Screw
1 1/2” Long
Thumb Screw
“Thumb Screws” are used in many places in
Crijo Pet Products, such as attaching sisal to
threaded inserts in Jump Post. At times, thumb
screws have trouble screwing at the correct
angle. If this is the case, DO NOT force them in
as this will destroy the thread. Instead back
them out a little, wiggle them to find the correct
angle, and screw them back in all the way.
Reference 2: Button Head
Cap Screw (BCHS) Assembly
This assembly is used wherever BHCS are
mentioned, and typically in sets of four.
Button Head
Cap Screw
- 1/4”-20 Thread
- 1 1/4” Long
Split Lock
Washer
Flat Washer
Slide a 1/4” split lock washer then a 1/4”
flat washer over a 1/4” Screw, and screw in
with a 4 mm Allen Wrench.
Reference 3: Tools Needed
- 4 mm Allen Wrench
Note: What is Sisal?
Sisal is the natural fiber material that
is found all over Crijo Pet Products.
It is one of the many reasons cats
love Crijo Pet Products. In fact, not
only do cats love to scratch sisal, it
gives them better grib on surfaces,
and it has a pleasant natural odor to
them.
All sisal on Crijo New
Generation
Equipment
can
be
removed, while the main structure is
disinfectanted. For sisal replacement
contact Crijo Pet Products LLC.
Attaching Cat Beds to Bed Posts (Fig.1)
Crijo Cat Beds attach to the top of bed posts,
using four 1.25” long BCHS (Ref.2). Note:
Cat Beds have ten holes that allow for four
different placements on posts, and can be
turned in four directions (Fig.1).
Bed Post attached
w/four 1 1/4” BHCS
Assemblies (Ref. 2)
Tower Base
with Casters
Attaching 14x14 Horizontal Sisal (Fig.2)
The 14x14 sisal is typically used in horizontal
orientations like on Crijo equipment bases.
To attach, screw four 3/4” thumb screw
(Ref.1) through the four grommets in the
sisal and into the four inserts in the base.
Crijo Towers have two 14x14 on the base
(unless a hinge assembly is attached) and
one on the top of the tower (Fig.2).
Attaching Sisal to Vertical
Posts (Fig.1)
Vertical sisal allows cats to reach
up to scratch. To attach, wrap a
10x16 piece of sisal around the
designated area of a vertical
post, so that the grommets on
each end are aligned over the
two threaded inserts in the post.
Bed Post
Screw two 3/4” thumb screws
(Ref.1) through the sisal grommets into the inserts (Fig.1).
Standard
Jump Post
End Cap
with Sisal
End Caps (Fig.1)
Standard 5.5” dia. End
Caps discs come standard
on all Crijo jump posts, and
are attached with 1.5” long
thumb screws. They are
interchangeable with End
Cap Clamps when using
Cat Walks and Cat Ramps.
Attaching Sisal to Jump Posts (Fig.1)
Jump Posts are the short horizontal posts
that cats use to navigate up Crijo equipment
(Cat walks/ramps are also laid across them).
Wrap a 7x16 piece of sisal under and over a
jump post, so that the grommets on each end
are aligned over the two threaded inserts in
the post. Screw two 3/4” thumb screws
(Ref.1) through the sisal grommets into the
inserts (Fig.1).
Vertical
Sisal
Attaching Pyramids and Sisal (Fig.3)
Two trapezoid shapes of sisal are attached to
the side of the pyramid, and one bow-tie
shape sisal is attached to the top, using a
total of twelve 3/4” thumb screws. Four
more thumb screws are used to attach the
pyramid to the tower top (It can be oriented
in two directions). For ease of installation,
secure the 14x14 piece of sisal on top of the
tower before attaching the pyramid (Fig.3).
Thumb
Screws
Pyramid
Top Sisal
14x14
Sisal
Pyramid
Figure 1
Top of
Tower
Figure 3
Thumb
Screws
Pyramid
Side Sisal