HOW TO REMOVE CYLINDER FROM
758 AND 858 PADLOCK
758 keying retaining padlock which requires key to lock
858 non key retaining padlock can be left open and closed/locked
without key
For installation assistance, contact SARGENT at 800-727-5477 • www.sargentlock.com
A
B
C
Remove cylinder retainer from cylinder for repining.
Reverse steps to reassemble.
Note: Be sure shackle is in the same position and also the
Insert a 5/64” Allen wrench and remove retainer
key
in the
position
in
the cylinder
during reassembly as it was
screw
as
shown.
Cylinder
and
retainer
will
drop
HOW
TO
REMOVE
LARGE
FORMAT
HOW
TO
REMOVE
OLD
STYLE
CORE
HOW TO REMOVE
FORMAT
TO REMOVE
OLD
STYLE
CORE
HOWLARGE
TOLARGE
REMOVE
LARGE FORMATHOW
HOWdisassembled
TOOLD
REMOVE
OLD
STYLE
CORE
Rotate keyHOW
to release
in order
to keep padlock “timed”.
out
together.
TOshackle.
REMOVE
FORMAT
HOW TO REMOVE
STYLE
CORE
AA.A. A. A.
B.
B.in
With key
BB. B.
this position,
51- PADLOCK
CYLINDERCYLINDER
FROM
51-FROM
PADLOCK
CYLINDER
FROM
51- PADLOCK
HOW
TO REMOVE
STYLE
CORE
CYLINDER
FROM 51-OLD
PADLOCK
CYLINDER FROM 51- PADLOCK
C.C.
C C. C.
KEY INKEY IN
WITH KEY IN WITH WITH
KEYTHIS
IN POSITION
THISWITH
POSITION
THIS POSITION
PULL OUT
PULLTHIS
OUTPOSITION
PULL OUT
pull
out
core.
PULL OUTCORE.CORE.
CORE.
CORE.
D.D. D.DD.
KEY
INKEY
WITH KEY IN WITH
With
key
in IN
WITH
KEYTHIS
IN POSITION
THISWITH
POSITION
THIS
POSITION
this
position,
PULL OUT
PULLTHIS
OUTPOSITION
PULL
pull
out OUT
core.
PULL OUTCORE.
CORE.
CORE.
CORE.
CONTROL
KEY
AND
TO REMOVE
KEY–RETURN
INSERT CONTROL
KEY
AND
REMOVE
KEY–RETURN
INSERT
KEY AND
TO REMOVE
KEY–RETURN
Insert control key and turn
InsertINSERT
control
key CONTROL
andTO
turn
INSERT
CONTROL
KEY
AND
TO REMOVE
KEY–RETURN
TURNTURN
COUNTERCLOCKTO
VERTICAL
POSITION
INSERT
CONTROL
KEY
AND
TO REMOVE
KEY–RETURN
TURN
COUNTERCLOCKTO VERTICAL
POSITION
COUNTERCLOCKTO
VERTICAL
POSITION
INSERT
CONTROL
KEY
AND
TO
REMOVE
KEY–RETURN
INSERT
CONTROL
KEY
AND
TO
REMOVE
KEY–RETURN
counterclockwise
until
To
remove
key
return
to
vertical
counterclockwise
until
To
remove
key
- return to vertical
TURN
COUNTERCLOCKVERTICAL
WISEISWISE
UNTILUNTIL
STOPAND
IS TO
AND POSITION
WITHDRAW.
INSERT
CONTROL
KEY
AND
TO REMOVE
KEY–RETURN
TURNTURN
COUNTERCLOCKWISE
TO
VERTICAL
POSITION
AND
WISE
UNTIL
STOP
WITHDRAW.
STOP
IS
AND WITHDRAW.
TURN
COUNTERCLOCKWISE
TO VERTICAL
POSITION
AND
COUNTERCLOCKWISE
TO
VERTICAL
POSITION
AND
stop
is
reached.
position
and
withdraw.
stop
is
reached.
position
and
withdraw.
WISE
UNTIL
STOP
IS
AND
WITHDRAW.
REACHED.
TURN
COUNTERCLOCKWISE
TO VERTICAL
POSITION AND
STOP IS REACHED.
WITHDRAW.
REACHED.
REACHED.
UNTIL
STOP
ISUNTIL
REACHED.
WITHDRAW.
UNTIL STOP IS REACHED.
UNTIL STOP IS REACHED.
WITHDRAW.
WITHDRAW.
REACHED.
Copyright © 2005, 2008, 2011 Sargent Manufacturing
Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
FROM
63-758 PADLOCK
CYLINDERCYLINDER
FROM 63-758
PADLOCK
CYLINDER
FROM
63-758 PADLOCK
HOW TO
REMOVE
LARGE
FORMAT
CYLINDER
FROM
63-758
PADLOCK
CYLINDER FROM 63-758 PADLOCK
A7799B