page break
page break
Technical Specifications
Clinical Results
Comfort and Reliability
The arm of the Pixel CO2 has seven joints, allowing you to work in comfort and reach all areas of the body –
while a fast modulation response assures laser consistency throughout the treatment.
page break
Skin Resurfacing
Skin Resurfacing
Laser Type
RF-excited CO2 laser
Wavelength
10.6 µm
Operational Mode
CW, super pulse
Laser Output Power
70 Watts CO2 source from Coherent Inc.
Surgical Mode
Courtesy of Michael H. Gold, MD
Pre-treatment
2 weeks after 1st Tx
Pre-treatment
6 months after 1st Tx
Photos Courtesy: Michael Shohat, MD
Photos courtesy: Dr. Tania Meneghel, Brazil
Skin Resurfacing
Skin Resurfacing
Gold Skin Care Center, Tennessee Clinical
Research Center, Nashville, TN, USA
Intuitive, Versatile, User-Friendly Operation
The Pixel CO2 is designed for the multiple clinical needs of your practice. The colored LCD touch screen
guides you easily through the parameter selection, starting with preset values based on clinical studies for
treating a wide range of indications including: skin resurfacing, acne scars, wrinkles and fine lines. You can
also individualize the treatment by changing the laser parameters to your specific needs.
Patients also benefit from a significantly shorter downtime compared to traditional CO2 applicators.
50 mm, 100 mm, oral, pharyngeal and nasal
Repeat/Pulse
On time 10-1000 msec
Off time 10-1000 msec
Pixel Mode
Pixel Handpieces
7x7 (49 pixels), 9x9 (81 pixels)
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Treatment Zone
11x11 mm
iPixel CO2 Mode
Reduced Risk
The high powered Pixel CO2 reduces the risk of delayed hypopigmentation, scarring, post-inflammatory
hyperpigmentation, infection and persistent erythema.
Surgical Handpieces
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Earl Minuk, Winnipeg, Canada
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Michael Shohat
Skin Resurfacing
Skin Resurfacing Combined with Face-Lift
Clinically Proven Technology
The Pixel CO2 laser has received FDA clearance for multiple applications and indications. Alma has conducted
over three years of clinical follow-up, studying hundreds of patients and their histologies.
Pre-treatment
3 weeks post-treatment
Photos Courtesy: Michael H. Gold, MD, Gold Skin Care Center, Nashville, TN USA
Pre-treatment
iPixel Handpiece
7x1 pixels
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Spacing
0 (1mm), 1 (2mm), 2 (3mm)
Controls
Color touch LCD screen, footswitch
Diode Aiming Laser
650 nm, 5 mW
Electrical
120 VAC, 16 A, 50/60 Hz or 230 VAC, 8 A, 50/60 Hz
Dimensions (HxWxD)
52” x 17” x 21” (132 cm x 43 cm x 53 cm)
Weight
135 lbs. (61 kg)
2 months post-treatment
Photos courtesy: Dr. Y. Ramon
About Alma Lasers
Rinofima
Alma Lasers is a global developer, manufacturer and provider of laser, light-based, radio frequency and ultrasound
devices for aesthetic and medical applications. Alma Lasers has been at the forefront of innovative multi-technology/
multi-application systems designed to meet the unique needs of today’s practitioners.
www.almalasers.co m
Pre-treatment
Immediately post-treatment
1 month post-treatment
Photos Courtesy: Dr. Rafael Nunes, plastic surgeon, Slim Clinique, Rio De Janeiro, Brazil
© 2010-2011 Alma Lasers Ltd. All Rights Reserved. *Alma Lasers, its logos, and Pixel are the trademarks
and/or registered trademarks of Alma Lasers Ltd. in the United States and/or other countries. Product
specifications are subject to change without notice.
pixel co2 ipixel PBCO04120801 Rev4USA.indd 1
US Headquarters
485 Half Day Road
Suite 100
Buffalo Grove, IL 60089
Tel +1-224-377-2000
Fax +1-224-377-2050
International Headquarters
14 Halamish St.
Caesarea Industrial Park
Caesarea, 38900 Israel
Tel +972-4-627-5357
Fax +972-4-627-5368
PBCO04120801 Rev4
Alma Lasers mission is to provide modular, cost-effective and high-performance systems that enable practitioners to
confidently offer safe, effective and profitable aesthetic treatments to their patients.
[email protected] [email protected]
5/22/11 5:22 PM
page break
page break
The high energy Pixel CO2 fractional
ablative laser offers faster treatment,
greater clinical results, reduced
patient downtime and unmatched
maneuverability.
page break
pocket inside
Maximum Results
Looking to improve clinical results, reduce patient downtime and lower operating
costs?
Alma Lasers Pixel CO2 fractional ablative laser with the new iPixel CO2 module is the
solution you and your patients have been looking for.
•
Speed – Treatment time is cut by more than half
•
Power – 70 Watt with multiple pre set parameters
•
Results – High thermal heating and enhanced clinical results
•
Downtime – Significantly shorter than traditional CO2 applicators
•
Versatility – Adjustable treatment settings
•
Safety - Unparalleled patient safety
•
Low Risk - Minimal risk of post-treatment side effects, such as infection,
scarring, erythema, or delayed hyperpigmentation or hypopigmentation
Give your patients younger, healthier skin in one quick treatment; with minimal
interruption to the patient's routine.
The Pixel CO2 offers a safe, quick and effective treatment for aged and damaged skin
Pixel Technology
•
The Pixel CO2 laser penetrates the skin with 10.6 um thermal microchannels, creating
a targeted ablative and thermal effect – without disturbing the surrounding tissue.
•
These micro-injury sites, about 15-20% of the treatment area, enhance the results
and jumpstart the healing process by stimulating collagen strengthening and neo
collagenesis.
Immediately after
48h
Histology Courtesy: Prof. Arie Orenstein
pixel co2 ipixel PBCO04120801 Rev4USA.indd 2
7 days
1 month
Introducing the iPixel CO2 -
Laser beam
The Pixel CO2 raises the bar for fractional skin ablation by
incorporating the iPixel CO2 module – the newest product from
Alma Lasers that delivers more precision while significantly
reducing treatment time.
The iPixel CO2 rests on two wheels that roll across the skin,
triggering a 70W laser pulse that is channeled into a horizontal line
of seven evenly spaced laser spots. As the turning of the wheels
trigger the laser, a symmetrical track of high thermal fractional
ablation is created regardless of treatment speed.
Focusing
lense
Final laser
pixel beams
Visit www.almalasers.com to learn more about this incredible
technology and how it will greatly improve your practice.
Epidermis
Pixel micro-channel
technology ablates
less than 20% of
the epidermis with
10.6 µm CO2 laser
energy. Tiny beams
of light penetrate the
skin, leaving thermal
channels going down
into the dermis.
Dermis
More Options
Choose from the surgical module, 7X7 or 9X9 stationary modules.
3 months
iPixel CO2
Pixel HP
Surgical HP
5/22/11 5:22 PM
page break
page break
The high energy Pixel CO2 fractional
ablative laser offers faster treatment,
greater clinical results, reduced
patient downtime and unmatched
maneuverability.
page break
pocket inside
Maximum Results
Looking to improve clinical results, reduce patient downtime and lower operating
costs?
Alma Lasers Pixel CO2 fractional ablative laser with the new iPixel CO2 module is the
solution you and your patients have been looking for.
•
Speed – Treatment time is cut by more than half
•
Power – 70 Watt with multiple pre set parameters
•
Results – High thermal heating and enhanced clinical results
•
Downtime – Significantly shorter than traditional CO2 applicators
•
Versatility – Adjustable treatment settings
•
Safety - Unparalleled patient safety
•
Low Risk - Minimal risk of post-treatment side effects, such as infection,
scarring, erythema, or delayed hyperpigmentation or hypopigmentation
Give your patients younger, healthier skin in one quick treatment; with minimal
interruption to the patient's routine.
The Pixel CO2 offers a safe, quick and effective treatment for aged and damaged skin
Pixel Technology
•
The Pixel CO2 laser penetrates the skin with 10.6 um thermal microchannels, creating
a targeted ablative and thermal effect – without disturbing the surrounding tissue.
•
These micro-injury sites, about 15-20% of the treatment area, enhance the results
and jumpstart the healing process by stimulating collagen strengthening and neo
collagenesis.
Immediately after
48h
Histology Courtesy: Prof. Arie Orenstein
pixel co2 ipixel PBCO04120801 Rev4USA.indd 2
7 days
1 month
Introducing the iPixel CO2 -
Laser beam
The Pixel CO2 raises the bar for fractional skin ablation by
incorporating the iPixel CO2 module – the newest product from
Alma Lasers that delivers more precision while significantly
reducing treatment time.
The iPixel CO2 rests on two wheels that roll across the skin,
triggering a 70W laser pulse that is channeled into a horizontal line
of seven evenly spaced laser spots. As the turning of the wheels
trigger the laser, a symmetrical track of high thermal fractional
ablation is created regardless of treatment speed.
Focusing
lense
Final laser
pixel beams
Visit www.almalasers.com to learn more about this incredible
technology and how it will greatly improve your practice.
Epidermis
Pixel micro-channel
technology ablates
less than 20% of
the epidermis with
10.6 µm CO2 laser
energy. Tiny beams
of light penetrate the
skin, leaving thermal
channels going down
into the dermis.
Dermis
More Options
Choose from the surgical module, 7X7 or 9X9 stationary modules.
3 months
iPixel CO2
Pixel HP
Surgical HP
5/22/11 5:22 PM
page break
page break
Technical Specifications
Clinical Results
Comfort and Reliability
The arm of the Pixel CO2 has seven joints, allowing you to work in comfort and reach all areas of the body –
while a fast modulation response assures laser consistency throughout the treatment.
page break
Skin Resurfacing
Skin Resurfacing
Laser Type
RF-excited CO2 laser
Wavelength
10.6 µm
Operational Mode
CW, super pulse
Laser Output Power
70 Watts CO2 source from Coherent Inc.
Surgical Mode
Courtesy of Michael H. Gold, MD
Pre-treatment
2 weeks after 1st Tx
Pre-treatment
6 months after 1st Tx
Photos Courtesy: Michael Shohat, MD
Photos courtesy: Dr. Tania Meneghel, Brazil
Skin Resurfacing
Skin Resurfacing
Gold Skin Care Center, Tennessee Clinical
Research Center, Nashville, TN, USA
Intuitive, Versatile, User-Friendly Operation
The Pixel CO2 is designed for the multiple clinical needs of your practice. The colored LCD touch screen
guides you easily through the parameter selection, starting with preset values based on clinical studies for
treating a wide range of indications including: skin resurfacing, acne scars, wrinkles and fine lines. You can
also individualize the treatment by changing the laser parameters to your specific needs.
Patients also benefit from a significantly shorter downtime compared to traditional CO2 applicators.
50 mm, 100 mm, oral, pharyngeal and nasal
Repeat/Pulse
On time 10-1000 msec
Off time 10-1000 msec
Pixel Mode
Pixel Handpieces
7x7 (49 pixels), 9x9 (81 pixels)
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Treatment Zone
11x11 mm
iPixel CO2 Mode
Reduced Risk
The high powered Pixel CO2 reduces the risk of delayed hypopigmentation, scarring, post-inflammatory
hyperpigmentation, infection and persistent erythema.
Surgical Handpieces
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Earl Minuk, Winnipeg, Canada
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Michael Shohat
Skin Resurfacing
Skin Resurfacing Combined with Face-Lift
Clinically Proven Technology
The Pixel CO2 laser has received FDA clearance for multiple applications and indications. Alma has conducted
over three years of clinical follow-up, studying hundreds of patients and their histologies.
Pre-treatment
3 weeks post-treatment
Photos Courtesy: Michael H. Gold, MD, Gold Skin Care Center, Nashville, TN USA
Pre-treatment
iPixel Handpiece
7x1 pixels
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Spacing
0 (1mm), 1 (2mm), 2 (3mm)
Controls
Color touch LCD screen, footswitch
Diode Aiming Laser
650 nm, 5 mW
Electrical
120 VAC, 16 A, 50/60 Hz or 230 VAC, 8 A, 50/60 Hz
Dimensions (HxWxD)
52” x 17” x 21” (132 cm x 43 cm x 53 cm)
Weight
135 lbs. (61 kg)
2 months post-treatment
Photos courtesy: Dr. Y. Ramon
About Alma Lasers
Rinofima
Alma Lasers is a global developer, manufacturer and provider of laser, light-based, radio frequency and ultrasound
devices for aesthetic and medical applications. Alma Lasers has been at the forefront of innovative multi-technology/
multi-application systems designed to meet the unique needs of today’s practitioners.
www.almalasers.co m
Pre-treatment
Immediately post-treatment
1 month post-treatment
Photos Courtesy: Dr. Rafael Nunes, plastic surgeon, Slim Clinique, Rio De Janeiro, Brazil
© 2010-2011 Alma Lasers Ltd. All Rights Reserved. *Alma Lasers, its logos, and Pixel are the trademarks
and/or registered trademarks of Alma Lasers Ltd. in the United States and/or other countries. Product
specifications are subject to change without notice.
pixel co2 ipixel PBCO04120801 Rev4USA.indd 1
US Headquarters
485 Half Day Road
Suite 100
Buffalo Grove, IL 60089
Tel +1-224-377-2000
Fax +1-224-377-2050
International Headquarters
14 Halamish St.
Caesarea Industrial Park
Caesarea, 38900 Israel
Tel +972-4-627-5357
Fax +972-4-627-5368
PBCO04120801 Rev4
Alma Lasers mission is to provide modular, cost-effective and high-performance systems that enable practitioners to
confidently offer safe, effective and profitable aesthetic treatments to their patients.
[email protected] [email protected]
5/22/11 5:22 PM
page break
page break
Technical Specifications
Clinical Results
Comfort and Reliability
The arm of the Pixel CO2 has seven joints, allowing you to work in comfort and reach all areas of the body –
while a fast modulation response assures laser consistency throughout the treatment.
page break
Skin Resurfacing
Skin Resurfacing
Laser Type
RF-excited CO2 laser
Wavelength
10.6 µm
Operational Mode
CW, super pulse
Laser Output Power
70 Watts CO2 source from Coherent Inc.
Surgical Mode
Courtesy of Michael H. Gold, MD
Pre-treatment
2 weeks after 1st Tx
Pre-treatment
6 months after 1st Tx
Photos Courtesy: Michael Shohat, MD
Photos courtesy: Dr. Tania Meneghel, Brazil
Skin Resurfacing
Skin Resurfacing
Gold Skin Care Center, Tennessee Clinical
Research Center, Nashville, TN, USA
Intuitive, Versatile, User-Friendly Operation
The Pixel CO2 is designed for the multiple clinical needs of your practice. The colored LCD touch screen
guides you easily through the parameter selection, starting with preset values based on clinical studies for
treating a wide range of indications including: skin resurfacing, acne scars, wrinkles and fine lines. You can
also individualize the treatment by changing the laser parameters to your specific needs.
Patients also benefit from a significantly shorter downtime compared to traditional CO2 applicators.
50 mm, 100 mm, oral, pharyngeal and nasal
Repeat/Pulse
On time 10-1000 msec
Off time 10-1000 msec
Pixel Mode
Pixel Handpieces
7x7 (49 pixels), 9x9 (81 pixels)
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Treatment Zone
11x11 mm
iPixel CO2 Mode
Reduced Risk
The high powered Pixel CO2 reduces the risk of delayed hypopigmentation, scarring, post-inflammatory
hyperpigmentation, infection and persistent erythema.
Surgical Handpieces
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Earl Minuk, Winnipeg, Canada
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Michael Shohat
Skin Resurfacing
Skin Resurfacing Combined with Face-Lift
Clinically Proven Technology
The Pixel CO2 laser has received FDA clearance for multiple applications and indications. Alma has conducted
over three years of clinical follow-up, studying hundreds of patients and their histologies.
Pre-treatment
3 weeks post-treatment
Photos Courtesy: Michael H. Gold, MD, Gold Skin Care Center, Nashville, TN USA
Pre-treatment
iPixel Handpiece
7x1 pixels
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Spacing
0 (1mm), 1 (2mm), 2 (3mm)
Controls
Color touch LCD screen, footswitch
Diode Aiming Laser
650 nm, 5 mW
Electrical
120 VAC, 16 A, 50/60 Hz or 230 VAC, 8 A, 50/60 Hz
Dimensions (HxWxD)
52” x 17” x 21” (132 cm x 43 cm x 53 cm)
Weight
135 lbs. (61 kg)
2 months post-treatment
Photos courtesy: Dr. Y. Ramon
About Alma Lasers
Rinofima
Alma Lasers is a global developer, manufacturer and provider of laser, light-based, radio frequency and ultrasound
devices for aesthetic and medical applications. Alma Lasers has been at the forefront of innovative multi-technology/
multi-application systems designed to meet the unique needs of today’s practitioners.
www.almalasers.co m
Pre-treatment
Immediately post-treatment
1 month post-treatment
Photos Courtesy: Dr. Rafael Nunes, plastic surgeon, Slim Clinique, Rio De Janeiro, Brazil
© 2010-2011 Alma Lasers Ltd. All Rights Reserved. *Alma Lasers, its logos, and Pixel are the trademarks
and/or registered trademarks of Alma Lasers Ltd. in the United States and/or other countries. Product
specifications are subject to change without notice.
pixel co2 ipixel PBCO04120801 Rev4USA.indd 1
US Headquarters
485 Half Day Road
Suite 100
Buffalo Grove, IL 60089
Tel +1-224-377-2000
Fax +1-224-377-2050
International Headquarters
14 Halamish St.
Caesarea Industrial Park
Caesarea, 38900 Israel
Tel +972-4-627-5357
Fax +972-4-627-5368
PBCO04120801 Rev4
Alma Lasers mission is to provide modular, cost-effective and high-performance systems that enable practitioners to
confidently offer safe, effective and profitable aesthetic treatments to their patients.
[email protected] [email protected]
5/22/11 5:22 PM
page break
page break
Technical Specifications
Clinical Results
Comfort and Reliability
The arm of the Pixel CO2 has seven joints, allowing you to work in comfort and reach all areas of the body –
while a fast modulation response assures laser consistency throughout the treatment.
page break
Skin Resurfacing
Skin Resurfacing
Laser Type
RF-excited CO2 laser
Wavelength
10.6 µm
Operational Mode
CW, super pulse
Laser Output Power
70 Watts CO2 source from Coherent Inc.
Surgical Mode
Courtesy of Michael H. Gold, MD
Pre-treatment
2 weeks after 1st Tx
Pre-treatment
6 months after 1st Tx
Photos Courtesy: Michael Shohat, MD
Photos courtesy: Dr. Tania Meneghel, Brazil
Skin Resurfacing
Skin Resurfacing
Gold Skin Care Center, Tennessee Clinical
Research Center, Nashville, TN, USA
Intuitive, Versatile, User-Friendly Operation
The Pixel CO2 is designed for the multiple clinical needs of your practice. The colored LCD touch screen
guides you easily through the parameter selection, starting with preset values based on clinical studies for
treating a wide range of indications including: skin resurfacing, acne scars, wrinkles and fine lines. You can
also individualize the treatment by changing the laser parameters to your specific needs.
Patients also benefit from a significantly shorter downtime compared to traditional CO2 applicators.
50 mm, 100 mm, oral, pharyngeal and nasal
Repeat/Pulse
On time 10-1000 msec
Off time 10-1000 msec
Pixel Mode
Pixel Handpieces
7x7 (49 pixels), 9x9 (81 pixels)
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Treatment Zone
11x11 mm
iPixel CO2 Mode
Reduced Risk
The high powered Pixel CO2 reduces the risk of delayed hypopigmentation, scarring, post-inflammatory
hyperpigmentation, infection and persistent erythema.
Surgical Handpieces
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Earl Minuk, Winnipeg, Canada
Pre-treatment
2 weeks after 1st Tx
Photos Courtesy: Dr. Michael Shohat
Skin Resurfacing
Skin Resurfacing Combined with Face-Lift
Clinically Proven Technology
The Pixel CO2 laser has received FDA clearance for multiple applications and indications. Alma has conducted
over three years of clinical follow-up, studying hundreds of patients and their histologies.
Pre-treatment
3 weeks post-treatment
Photos Courtesy: Michael H. Gold, MD, Gold Skin Care Center, Nashville, TN USA
Pre-treatment
iPixel Handpiece
7x1 pixels
Repeat/Pulse
10-500 mJ/pixel
Power
Low (10 W), Medium (30 W), High (70 W)
Spacing
0 (1mm), 1 (2mm), 2 (3mm)
Controls
Color touch LCD screen, footswitch
Diode Aiming Laser
650 nm, 5 mW
Electrical
120 VAC, 16 A, 50/60 Hz or 230 VAC, 8 A, 50/60 Hz
Dimensions (HxWxD)
52” x 17” x 21” (132 cm x 43 cm x 53 cm)
Weight
135 lbs. (61 kg)
2 months post-treatment
Photos courtesy: Dr. Y. Ramon
About Alma Lasers
Rinofima
Alma Lasers is a global developer, manufacturer and provider of laser, light-based, radio frequency and ultrasound
devices for aesthetic and medical applications. Alma Lasers has been at the forefront of innovative multi-technology/
multi-application systems designed to meet the unique needs of today’s practitioners.
www.almalasers.co m
Pre-treatment
Immediately post-treatment
1 month post-treatment
Photos Courtesy: Dr. Rafael Nunes, plastic surgeon, Slim Clinique, Rio De Janeiro, Brazil
© 2010-2011 Alma Lasers Ltd. All Rights Reserved. *Alma Lasers, its logos, and Pixel are the trademarks
and/or registered trademarks of Alma Lasers Ltd. in the United States and/or other countries. Product
specifications are subject to change without notice.
pixel co2 ipixel PBCO04120801 Rev4USA.indd 1
US Headquarters
485 Half Day Road
Suite 100
Buffalo Grove, IL 60089
Tel +1-224-377-2000
Fax +1-224-377-2050
International Headquarters
14 Halamish St.
Caesarea Industrial Park
Caesarea, 38900 Israel
Tel +972-4-627-5357
Fax +972-4-627-5368
PBCO04120801 Rev4
Alma Lasers mission is to provide modular, cost-effective and high-performance systems that enable practitioners to
confidently offer safe, effective and profitable aesthetic treatments to their patients.
[email protected] [email protected]
5/22/11 5:22 PM