Premium Fully Accessible Slatted Ceiling System
100% accessibility
Slatted Modules
Up to 2400 long slats
Unique BCA Fire Group 1 Options
Australian Made
www.supawood.com
Why SUPATILE SLAT ?
SUPATILE SLAT is the latest addition to SUPAWOOD’s
popular SUPATILE family of products developed to fit
into the traditional 2-way T-bar grid ceiling system.
Both decorative and sound absorbent, SUPATILE SLAT
will quickly and easily transform any area with an up
market timber or linear look.
Key features:
100% access to ceiling cavity
Simple to specify
Quick and easy to install
Can fit existing ceiling grids with “Drop-In”
fixing option
Panel lengths up to 2400 with “Lift & Shift”
fixing option
Quick & easy fit-out solution
Attractive range of slat profiles
Multi-directional effects possible
Fire Resistant and Green options
Front cover:
SUPATILE SLAT 2 and custom Random Lift & Shift in CEDAR Clear
used to throughout the ceilings of a TAFE library and study areas.
Left from top:
SUPATILE SLAT Lift & Shift in DRIFTWOOD Clear Vic Ash forms an
interesting centre feature in the ceiling of a corporate HQ office area.
SUPATILE SLAT Lift & Shift option 5 in DRIFTWOOD Black forms a
striking ceiling in a corporate HQ reception and hallway.
SUPATILE SLAT Lift & Shift option 5 in SUPAFINISH Tasmanian Oak
defines the areas of a university science faculty study area.
SUPATILE SLAT DIT in Clear DRIFTWOOD Drop-In-Tile option 2 in the
reception of a memorial museum.
Below:
SUPATILE SLAT 5 DIT in SUPAFINISH White & SUPACOLOUR Yellow
enhance the decor colour scheme of a staff lounge area.
www.supawood.com
Premium Fully Accessible Slatted Ceiling System
Fixing Options
SUPATILE SLAT panels come in two fixing options.
Lift & Shift (L&S) is supplied with SUPAWOOD’s own SUPATILE grid system.
DIT (Drop-In Tiles) are designed to fit into an existing grid system.
LIFT & SHIFT
Panel to Panel
Grid Requirements:
Grid is to be SUPATILE GRID with
main runners installed at 600mm
centres with 600mm cross-tees at
1200 or 600mm centres.
Panel to Panel - end to end
When installed as per SUPAWOOD's
instructions the SUPATILE Grid will
s u p p o r t a n y S U PAT I L E S l a t
configuration.
Other Special Features:
5mm end-to-end joints
Standard panels sizes available
1200 x 600
600 x 600
1200 x 300
1800 x 600
2400 x 600
DIT Drop-In-Tile
Panel to Panel
Panel to Panel - end to end
SUPATILE Slat L&S panels can
“cross over” T-bars, which means a
600 x 600 SUPATILE Grid layout
can be used to create a truly
random panel layout.
Grid Requirements:
Existing grid may be repainted
(enamel paint recommended) and
used but must be able to support the
weight of the tiles as well as the
service load factors as prescribed in
the AS2785. Refer to Supawoods
Technical Services Department for tile
weights.
What is required to achieve this will
depend on the specific brand,
system and configuration currently
installed.
25mm end-to-end joints
Standard panels sizes available
1200 x 600
600 x 600
1200 x 300
Typically additional support would
be expected to consist of additional
hanger supports but the contractor
is to take independent advice on
this from the supplier of the grid.
Left from top:
SUPATILE SLAT 2 Lift & Shift in CEDAR Clear along walkways on the levels of an atrium.
SUPATILE SLAT 2 Lift & Shift in SUPAFINISH Tas Oak.
SUPATILE SLAT 4 DIT in SUPAFINISH Hoop Pine.
www.supawood.com
Colour Ranges
available
The Range
Fixing System
available
Slat 1
FINISH
60mm wide cross battens @ max 600 centres
VENEER
IAT FR
when
specified
CEDAR
Open area 37%
DROP - IN
LIFT & SHIFT
Typical weight 11kg/m2
Slat 2
FINISH
60mm wide cross battens @ max 600 centres
VENEER
IAT FR
when
specified
DROP - IN
LIFT & SHIFT
Open area 20.8%
CEDAR
Typical weight 13kg/m2
Slat 3
60mm wide cross battens @ max 600 centres
FINISH
IAT FR
when
specified
CEDAR
Open area 58%
DROP - IN
LIFT & SHIFT
Typical weight 12kg/m2
Slat 4
60mm wide cross battens @ max 600 centres
FINISH
42
IAT FR
when
specified
Open area 57%
Slat 5
Typical weight 15kg/m
CEDAR
DROP - IN
2
DROP IN: 60mm wide cross battens @ max 600 centres
LIFT & SHIFT: 50x18mm cross battens
on edge @ max 600 centres
IAT FR
when
specified
FINISH
VENEER
DROP - IN
LIFT & SHIFT
CEDAR
Open area 76%
Typical weight 15kg/m
2
Note that the sizes above are nominal and will vary depending on finish type selected.
www.supawood.com
Freecall 1800 002 123
Concept Veneers & Colours
Hoop Pine SF
Fusion Maple SF
Smooth Mahogany SF
Cracked Cherry SF
VENEER
Euro Beech SF
White SF
Tasmanian Oak SF
Spotted Gum SF
Matt Silver SF
Black SF
Natural Timber Veneer
or
any other
species
Tasmanian Oak ¼
Blackbutt
Spotted Gum
American Walnut
Your Choice
Driftwood Whitewashed
Driftwood Blackwashed
The Rustic Timber Lining
NOTE: DRIFTWOOD is a special rustic finish.
Please refer to the DRIFTWOOD brochure for features to be expected... click here
Driftwood Clear Vic Ash
CEDAR
Driftwood White
Driftwood Black
COLOUR 2-pack
Natural Timber
This shows the range
of colours that can be
expected with cedar.
“...love the colour
variation in the timber.”
LH - KPA, Perth
Match to
any colour
reference
Other custom finishes are also available. Please contact our customer service team on 1800 002 123
Colours shown in these swatches are a guide only and actual will vary from panel to panel.
Driftwood and Cedar finishes in particular are natural products and there will be variations between slats.
www.supawood.com.au
Premium Fully Accessible Slatted Ceiling System
Suggested Specification Wording
Ceiling to be SUPATILE SLAT slatted ceiling system.
Panels to be SUPATILE [select option number or Random]
with [Drop in/ Lift & Shift] fixing option.
Panel finish type to be [SUPAFINISH Concept Veneer/
SUPAVENEER Natural Timber Veneer/ Driftwood/ Western
Red Cedar/other Solid Timber species] in [specify colour
here].
Grid finish to be black and installed as per requirements below.
Typical panel size to be [1200x600/600x600/........./ as
shown on RCP].
[Delete whichever not applicable:] Panels to have IAT FR,
integrated acoustic textile pre-attached/ Lay HP50 Jet Black
bulk insulation over ceiling panels/ Ceiling and all services
above to be painted out black.
Panels to be Fire Group 3 / 2 / 1 [delete as required] per BCA
Specification C1.10 clause 4. [Note that fire groups 1 is only
available in the SUPAFINISH finish type and Group 2 in
SUPAFINISH and SUPAVENEER.]
Panel installation to be as per manufacturer's instructions
and AS/NZS 2785.
[delete whichever of the following paragraphs does not apply]
Grid Requirements for Lift and Shift fixing option:
Grid is to be SUPATILE GRID with main runners installed at
600mm centres with 600mm cross-tees at 1200 or 600mm
centres. Grid is to be installed as per Supawood's
“SUPATILE SLAT Lift & Shift Grid & Panel installation
procedure”.
Grid Requirements for Drop in Tile fixing option:
Existing grid may be repainted (enamel paint
recommended) and used but it is the contractors
responsibility to ensure it is able to support the weight of the
tiles as well as the service load factors as prescribed in the
AS2785. *
Refer to Supawood's Technical Services Department for tile
weights.
*What is required to achieve this will depend on the specific
brand, system and configuration currently installed.
Typically additional support would be expected to consist of
additional hanger supports but the contractor is to take
independent advice on this from the original supplier of the
existing grid.
Panels are to be FSC or PEFC certified. Documentary
evidence in the form of an invoice with each line item
annotated with the PEFC/FSC content and supplier's chainof-custody number must be provided to the project
superintendent for project completion.
For complete unabridged Spec Wording in Word format...click here
www.supawood.com
Above:
SUPATILE SLAT 2 Lift & Shift in CEDAR Clear on the ceilings
of the walkways on the different levels of an atrium in a
university building.
For more product information:
"Global technology and know-how. Local manufacture and support."
SUPAWOOD produce an extensive range of market-leading lining
systems and look forward to helping you on your next project.
Website: www.supawood.com
SUPAWOOD Head Office
Australasian Support and Manufacturing
Phone: +61 1800 002 123
Email: [email protected]
SUPAWOOD UK
UK & EU Support and Manufacturing
Phone: +44 (0) 845 347 0026
Email: [email protected]