Product Description
ZIPPSOL™is the ONLY spray grade ammonium sulfate made as a PRIMARY product. ZIPPSOL™ is
NOT A BY-PRODUCT of another manufacturing process. Primary ammonium sulfate is made
through the reaction of anhydrous ammonia and concentrated sulfuric acid to manufacture the purest,
cleanest, most completely soluble product in the market. ZIPPSOL™ is formulated and packaged to insure it is the highest quality and freedom from contaminants. ZIPPSOL™ is double screened to assure
uniform particle size and dissolves readily in the spray solution for maximum effectiveness.
Total Nitrogen (N)
(As Ammoniacal Nitrogen)
Total Sulfur (S)
21%
Typical Sieve
Analysis
Typical
Result (%)
24%
+20
+28
+35
+48
+100
+140
-140
24%
22%
16%
12%
16%
8%
2%
(Derived from Anhydrous Ammonia and Sulfuric Acid)
Size Guide Number(Typical SGN)
Bulk Density (Typical)
Formula
(NH4)2SO4
Analysis
Assay:
™
Products Specifications
56
75 lbs./ft3
Formula Weight
132.14g/mol
CAS
7783-20-2
EINECS No
231-984-1
Standard
Not < 99.0% and not > 100.5%.
Impurities:
As - Arsenic
Cd - Cadmium
Cu - Copper
Pb - Lead
Hg - Mercury
Mo - Molybdenum
Ni - Nickel
Se - Selenium
Zn - Zinc
Typical
99% to 100%
State of Texas
Standards
(ppm)
Typical
Analysis
(ppm)
41
39
1500
300
17
18
420
100
2800
< 0.01
< 0.2
< 0.5
<1
0.04
<2
1
< 0.01
9
Na - Sodium
K - Potassium
Mg - Magnesium
Ca - Calcium
Cl - Chlorine
11
3
8
15
32
Packaging
51# Bags - 40 bags(51#plastic bags at 2040 # / pallet) / pallet, top and bottom cap plus shrink wrap
2000 # Bulkbag (Superbag)– new woven poly one-way superbags on pallet with slip sheet
Production Facility
Plainview Plant
HCR 2 Box 17 Hwy 194
Plainview, Tx 79072-1928
JP Rev. 09-01-06
™