BASES
1
#​
SINGLE DRAWER
BASES
34-½” High x 24” Deep
Width options:
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
4
#​
FULL HEIGHT DOORS
Notes:
- Specify right (R) or left (L)
hinge on cabinets 24” wide and
less
-39” and 42" wide have a 2"
center stile
-Adjustable shelves
2
#​
DRAWER + (2) ROLL OUTS
34-½” High x 24” Deep
Width options:
18”
30”
3
FULL HEIGHT 12" DEEP
34-½” High x 12” Deep
Width options:
30”
36”
Width options:
6”
9”
18”
30”
42”
Notes:
- Specify right (R) or left (L)
hinge on cabinets 24” wide and
less
-42" wide has a 2" center stile
-(2) adjustable Shelves
- 6” wide always has slab door
5
#​
2-BIN TRASH PULLOUT
Notes:
-Specify right (R) or left (L)
hinge on 18” wide cabinet
-Rollouts are 5-5/16”
Metadrawer
#​
34-½” High x 24” Deep
34-½” High x 24” Deep
Width options:
18”
Notes:
-Door is mounted to ​
aluminum unit. ­Soft closing. ­Two 35 quart white bins included. 6
#​
TRAY DIVIDER
34-½” High x 24” Deep
Width options:
12”
-Adjustable Shelves
Notes:
-White wire tray divider installed
at bottom.
BASES
7
#​
3 DRAWERS
34-½” High x 24” Deep
Width options:
24”
27”
CORNER BASES
10
#​
LAZY SUSAN
34-½” High x 24” Deep
Width options:
36” x 36”
Notes:
-Includes 28” white plastic lazy
susan
-Knuckle hinge door
8
#​
3 DRAWERS POTS/PANS
34-½” High x 24” Deep
Width options:
30”
33”
36”
Notes:
-(2) Bottom drawers come
standard with wood boxes and
undermount soft close to
support pots and pans.
34-½” High x 24” Deep
9
#​
4 DRAWERS
Width options:
12”
15”
18”
21”
34-½” High x 24” Deep
11
#​
BLIND CORNER
Width options:
39 (cabinet 36”)
42 (cabinet 39”)
45 (cabinet 42”)
Choose right (R) or left (L)
hinge side on order form. A left
cabinet has the blind side on
the left and the door on the
right (top picture). Cabinet
comes 3” shorter than cabinet
name.
Notes:
-No accessories are included,
-Pull your cabinet 3" away from
wall to allow door to open
(bottom picture).
- 39 cabinet = 11 ⅞” wide door
42 cabinet = 14 ⅞wide door
45 cabinet = 17 ⅞” wide door
-Wait until you receive cabinet
to confirm clearance for
accessories.
2
SINK BASES
12
#​
STANDARD SINK
34-½” High x 24”
Deep
Width options:
24”
30”
33”
36”
MISC. BASES
14
#​
MICROWAVE BASE
34-½” High x 24” Deep
Width options:
30”
Notes: -24" has 2 doors
34-½” High x 24” Deep
13
#​
FARMHOUSE SINK
Width options:
33”
36”
39”
Notes:
-39" have 2" center stile
-Has shelf at bottom of false
front.
-Fixed shelf. False front 10" tall.
34-½” High x 24” Deep
15
#​
COOKTOP BASE
Width options:
33”
39”
Notes:
-Range Base: Includes a full top
- Range Base: Drawer boxes are
8” high if dovetail, or 5 7/8”
Metabox
-Range Base: Drawer fronts 11
5/8” and over are made with door
rail
-Cabinets 39” and wider include a
2” center stile finished in the door
color
3
12”​
high​​
WALL MOUNT 15”​
high​​
WALL MOUNT
16
#​
12”​
high
12” High x 12” Deep
Width options:
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
19
#​
15”​
high
Notes:
-39" & 42” have 2" center stile.
- Cabinets 24” wide and less
have 1 door.
-Install hinge as R or L
17
#​
12”​
high
READY FOR GLASS
12” High x 12” Deep
Width options:
18”
30”
18
12”​
high
LIFT UP
12” High x 12” Deep
Width options:
24”
30”
36”
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
Notes:
-39" and 42” have 2" center stile
-Install hinge as R or L
- Cabinets 24” wide and less
have 1 door.
20
#​
15”​
high
READY FOR GLASS
Notes:
-Interiors finished to match
doors
-Available in shaker only
-Glass not included
-Image does not show shaker
style
-Install hinge as R or L
- Cabinets 24” wide and less
have 1 door.
#​
15” High x 12” Deep
Width options:
15” High x 12” Deep
Width options:
18”
30”
Notes:
-Interiors finished to match
doors
-Available in shaker only
-Glass not included
-Image does not show shaker
style
-Install hinge as R or L
- Cabinets 24” wide and less
have 1 door.
​
21
#​
15”​
high
LIFT UP
15” High x 12” Deep
Width options:
24”
30”
36”
Notes:
-Door opens up 90 degrees.
Notes:
-Door opens up 90 degrees
4
18”​
high​​
WALL MOUNT 21”​
high​​
WALL MOUNT
218” High x 24” Deep
​
22
#​
Width options:
30”
36”
18”​
high
23
#​
18”​
high
APPLIANCE GARAGE
21”High x 12” Deep
26
#​
Width options:
24”
30”
36”
42”
21”​
high
Notes:
-This size is typically used
above appliances.
Notes:
-39" & wider have 2" center stile
- Cabinets 24” wide and less
have 1 door.
18” High x 12” Deep
21” High x 24” Deep
Width options:
24”
Notes:
-Finished on both sides.
-​
Height clearance when door is open is 15.5". ­Both sides come finished to match doors.
27
#​
21”​
high
ABOVE FRIDGE
Width options:
36”
39”
42”
Notes:
-39" and wider have 2" center
stile
18” High x 18” Deep
24
#​
Width options:
30”
18”​
high
MICROWAVE
Notes:
-Opening 28.5" wide by 15.75"
tall
-Order shelf for microwave
¾” x 28.25 x 18.
25
#​
18”​
high
ABOVE FRIDGE
That’s it for 21”s
18” High x 24” Deep
Width options:
30”
36”
5
30”​
high​​
WALL MOUNT 39”​
high​​
WALL MOUNT
28
#​
30”​
high
30” High x 12” Deep
Width options:
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
39” High x 12” Deep
31
#​
39”​
high
Notes:
-39" and wider have 2" center
stile
- Cabinets 24” wide and less
have 1 door.
29
#​
30”​
high
READY FOR GLASS
30” High x 12” Deep
Width options:
18”
30”
30
30”​
high
OPEN SHELVES
30” High x 12” Deep
Width options:
12”
15”
18”
24”
30”
Notes:
-Finished to match doors
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
Notes:
-39" and wider have 2" center
stile
- Cabinets 24” wide and less
have 1 door.
​
32
#​
39” ​
high
READY FOR GLASS
Notes:
-Interiors finished to match
doors
-Available in shaker only
-Glass not included
-Image does not show shaker
style
-Glass is not included
-Order the gasket #47
- Cabinets 24” wide and less
have 1 door.
#​
Width options:
39” High x 12” Deep
Width options:
18”
30”
Notes:
-Interiors finished to match
doors
-Available in shaker only
-Glass not included
-Image does not show shaker
style
-Glass is not included
-Order the gasket #47
- Cabinets 24” wide and less
have 1 door.
33
#​
39”​
high
OPEN SHELVES
39” High x 12” Deep
Width options:
12”
15”
18”
24​
”
30”
Notes:
-Finished to match doors
6
84” PANTRY
84”High x 24” Deep
34
#​
84”​
high
PANTRY w/SHELVES
Width options:
18”
30”
84” OVEN PANTRY
36
#​
84”​
high
SINGLE OVEN
Notes:
-18” is single door and 30” is
double door.
-Shaker style doors have
center rail on lower door
-(5) Shelves
84”High x 24” Deep
35
#​
84”​
high
PANTRY w/ROLL OUTS
Width options:
18”
30”
Notes:
--18” is single door and 30” is
double door
-Shaker style doors have
center rail on lower door
-(4) Rollout Drawers
84”High x 24” Deep
Width options:
33”
Notes:
-Frame has 5” top/bottom rails
and 3 1/2” sides.
37
#​
84”​
high
DOUBLE OVEN
84”High x 24” Deep
Width options:
33”
Notes:
-Frame has 5” top/bottom rails
and 3 1/2” sides.
7
93” PANTRY
93”High x 24” Deep
38
#​
93”​
high
PANTRY w/SHELVES
Width options:
18”
30”
93” OVEN PANTRY
40
#​
93”​
high
SINGLE OVEN
Notes:
-18” is single door and 30” is
double door
-Shaker style doors have
center rail on lower door
-(5) Shelves
93”High x 24” Deep
39
#​
93”​
high
PANTRY w/ROLL OUTS
Width options:
18”
30”
93”High x 24” Deep
Width options:
33”
Notes:
-Frame has 5” top/bottom rails
and 3 1/2” sides.
41
#​
93”​
high
DOUBLE OVEN
93”High x 24” Deep
Width options:
33”
Notes:
-Frame has 5” top/bottom rails
and 3 1/2” sides.
Notes:
-18” is single door and 30” is
double door
-Shaker style doors have
center rail on lower door
-(4) Rollout Drawers
CORNER WALL MOUNT
27” width x 12” depth
42
#​
27” ​
EACH SIDE
BLIND CORNER
Height options:
15”
30”
39”
Notes:
-Available blind on right (R) or
left (L) side.
-Cabinets are 24” and
accounts pulling cabinet 3"
away from wall to allow door
to open
24” width x 12” depth
43
#​
24”​
EACH SIDE
HINGED CORNER
Height options:
30”
39”
Notes:
-Door has knuckle hinge
-no accessories included
8
- Door is 11.81” wide
FINISHING PIECES
44
#​
MOLDINGS
45
#​
WALL SIDE PANEL
46
#​
BASE SIDE PANEL
47
#​
TALL SIDE PANEL
48
#​
CUSTOM SIZE PANEL
6” x 92” x ¾”
and
1.5” x 92” x ¾”
Notes:
-Use for crown, light rail, toe
kick and fillers
-Finished on 1 side & all edges
-Grain runs long direction
15” x 42” x ¾” thick
Notes:
-SIDES OF CABINETS DO NOT
MATCH DOORS. Order panels.
-Finished on 1 side and all
edges. Grain runs long direct.
49
#​
48” x 12” FINISHED SHELF
50
#​
42” x 24” BASE SHELF
27” x 29.8” x ¾” thick
Notes:
-Finished on 1 side and all
edges. Grain runs long direct.
-Use our molding to wrap
around cab. side at toe-kick
-Height matches door reveals.
27 x 92” x ¾” thick
Notes:
-Finished on 1 side and all
edges. Grain runs long direct.
-Can be split in tall direction to
make extra tall wall panels
when stacking,
___” Width x __” Height
Notes: -Finished on all surfaces.
-Max size 92”high x 43” wide.
-Grain runs with long direction
-Use if you want your panels flush
with the face of doors.
Square Feet = H” x W” / 144
51
#​
42” x 12” WALL SHELF
52
#​
RUBBER STRIP
53
#​
HEAT SHIELD
48” width x 12” depth
x ¾” thick
Notes: -Finished on all sides
-Shelf supports not provided
42” width x 24”deep ​
x ¾” thick
Notes:
-Same finish as interior of
cabinets.
-Oversized. Cut on site. 42” width x 12”deep ​
x ¾” thick
Notes:
-Same finish as interior of
cabinets.
-Oversized. Cut on site. 50' Rubber Strip for glass installation FOR THERMOFOIL (SET) Notes:
Metal strips to be installed
between your oven and the
cabinets to either side of it. One
set comes with every sink base
cabinet.
9
Leadtime, Delivery and Installation
1.​
Leadtime and Delivery: The lead­time is approximately 6­weeks from the when you order. Cabinets are shipped to our partner warehouse in Hayward for pickup. They will contact you when the cabinets arrive to schedule a time for you to pick them up. Please ask Ecohome if you need a referral for a mover with a truck. 2. ​
Installation​
: Mod cabinets are European frameless construction and may not be suitable for DIY installation. We strongly advise installation by an experienced professional. Installation support is not provided. Resources on how to install frameless cabinets can be found through YouTube and Google. Cabinetry Specifications
10
Cabinetry Specifications
1. ​
Construction type: 6. ​
Doors: 2. ​
Materials: 7. ​
Edge Banding: 3. ​
Top Coat: 8. ​
Heat Shields: 4. ​
Drawers / Roll outs: 9. ​
Shelves: Our cabinets are called European or frameless style which provides 20% more storage than face frame cabinets at the other big box stores. All cabinet part connections use the wooden dowel­and­glue construction method while the box is clamped together. This makes the box substantially more stable than flat pack cabinets. Doors add approx. 7/8" thickness to depth of cabinet. Example: 24" deep base cabinet is 24 7/8" deep. Our cabinets have ¾” thick top and bottom mounting rails to safely attach your cabinets to the wall. Our cabinets are 3/4” high density engineered wood except the back which is 1/4” thick. They are available in White or Light Wood Grain melamine finish.
Topcoats are one of the largest off gassers in your home. Our topcoat is zero VOC waterborne and Ultraviolet (UV) cured to be one of the best top coats on the market. UV waterborne coatings provide a much harder finish than solvent and oil based coatings. All top coats, stains and paints are water borne and GREENGUARD Certified to be safe. Our drawers are soft closing! They are white epoxy coated metal sides with 3/4” melamine engineered wood bottoms and ­ 2" Shaker Doors are available in Cherry, Maple and Alder (domestic hardwoods). Center panel of shaker doors is MDF with veneer wood. Drawer are solid wood slab. ­ Slab (flat) doors are available in Thermofoil (PVC) or painted MDF. Thermofoil runs vertically on doors and horizontally on drawers. The backs of thermofoil doors are melamine to coordinate with cabinet interior. Doors and drawers require alignment adjustments at the end of installation before handles are installed. Our cabinets have durable PVC edgebanding. The open cabinets with finished interiors feature veneer edgebanding.
Heat shields must be installed between cabinetry and heat producing appliances. A pair of Heat Shields are included packed in the Sink Base with each Thermofoil order. Failure to install heat shields where cabinet doors will be exposed to high temperatures voids their warranty.
Shelves are 3/4” thick and match the cabinet interior. Shelves are edge banded with PVC on the face edge. Shelves rest on 11
backs. They have a 50 lb capacity and soft­close guides. Drawer box used for short drawers is 3 3/8” high. Tall drawer heads 11 7/8” & above as well as the roll­outs are 5 7/8” high. Drawer box depth is 19 5/8” . All drawer fronts will be slab (flat) style, even on shaker orders.
5mm metal shelf pins. Shelves in open cabinets with finished interiors have edge banding finished to match. Shelf holes are bored in the cabinet at 32mm ­ 1 1∕4” increments. Wall and tall cabinets have full depth adjustable shelves. Base and vanity cabinets have 14 7/16” deep adjustable shelves. 5. ​
Hinges: 10.​
Toe Kick: Our cabinets come standard with soft closing, 110 degree, fully concealed, 6­way adjustable, clip­demountable hinges.
Base and tall cabinets include 3/4” sub toe kick dowelled into the cabinet end panels. Toe kick covers are required.
12
Design Tips
1. ​
Appliances: 6. ​
Accessories: 2. ​
Moldings: 7. ​
Stacking Cabinets: 3. ​
Toekicks: 8. ​
Sinks: The first thing to do when planning your kitchen is choose your appliances and look at the specification sheet (found on the manufacturer's website) to see how much clearance they need above, below and to the sides as well as their exact dimensions. Refrigerators, cooktops and under cabinet hoods are ALL different sizes. Dishwashers and stoves are standard sizes. Plan for your cabinets to be at least 1.5" shy of touching the ceiling and the walls. Order our 6" wide "Molding" so your installer can cut it to fit in this space. If you want the molding to be flush with your doors you will use two moldings applied one on top of the other.
Use our 6” molding as your toe­kick molding. It’s extra tall to be fit on site. At the ends of base cabinet runs wrap this molding around the corner of the base cabinet and put our Base Panel above it. Plenty of accessories for your cabinets are available online or at traditional box stores. To keep Mod’s simple and keep our prices down we recommend waiting until you receive the cabinets, measure the size you need, then order the accessory. If you are stacking cabinets and the wall side panel is not tall enough, you can order a tall side panel. When planning for your sink, take the cabinet base width and subtract 2”. This is the max width your sink basin can be. 4. ​
18” Above Countertops: 9. ​
Want a Wine Rack?: 5. ​
Refrigerator Doors: 10. ​
Want a Book Shelf?: You need 18" clear above your countertops for most cities to be code compliant. This means your light rails are 18” away from your countertop (not just the cabinets) When putting a refrigerator next to a wall look up the spec to see how much space you need between the refrigerator and the wall to allow the door to open and drawers to be pulled out. Do you want a base wine rack? Order our Base Cabinet #2 or the Base Full Height #3 and simply up an accessory like this one in http://amzn.to/1FcbYfV. Your wine will be behind doors. For exposed wine bottles, you can use the same advice for the bookshelf.Your bottles might stick out a little past the adjacent doors. Do you want a base bookshelf? Order our Wall Open Cabinet that is 30” tall (#25) and build a toe­kick out of 2x4’s. This toe­kick is covered up by the 6” molding used for the toe­kick. 13
Checklist When Ordering Mod Cabinetry
1. ​
Getting 2 Different Finishes?: Each different finish you want (example white painted wall cabinets and cherry shaker bases) is a SEPARATE order. Fill out a separate order form with all of the cabinets and parts you want for that specific finish. 5. ​
Custom Panels (#43):​
Our custom panels are finished on both sides and all ¾” thick edges. Order custom panels for any application you need the perfect size panel that is finished on all edges. To calculate your custom panel cost, multiply your width in inches by your height in inches and then divide by 144. This will give you your square feet. Multiply your square feet by $21 for thermofoil and $35 for paints and stains. 2. ​
Crown Molding (#39)​
: 6. ​
Glass Strip: (#47): 3. ​
Light Rails (#39)​
: 7. ​
Heat Shields (#48): 4. ​
Side Panels (#40, #41, #42):​
Order 6” molding everywhere your cabinets touch the ceiling, touch the walls and touch the ground. This will be cut to the actual size on site AFTER the cabinets are installed. Order 1.5” molding if you want to put lights under your wall cabinets (remember you need 18” clear above your countertop). If you are ordering cabinets prepared for glass, order the rubber strip in the add­on’s section. The rubber strip goes behind the glass to hold it in place. You can buy glass at any local glass shop. Bring in the doors to them or measure the size or your holes (subtract ⅛” from all edges so you can slip the glass into the opening). Thermofoil orders­ If you ordered a sink cabinet a pair of heat shields will come with that cabinet. If you did not and you have an oven, order a set of heat shields. Our cabinets are NOT finished on the sides. Everywhere you can see the side of the cabinet, order a wall, base or tall panel. They are oversized to be cut down on site. Our side panels are finished on all ¾” thick edges and ONE side (to keep your costs down). If you want panels that are finished on both sides, order our custom panels. 14