Compact Mixer-Feeder Wagon with 2 Vertical Augers
PROFILE Compact 80 Series
Product Information
www.kuhn.com
The PROFILE mixer-feeder range is expanding with five body capacities with “go anywhere” geometry: 14, 15, 16, 18 and 20 m3. This range complements the current
PROFILE 80 Series by retaining the broad cross-conveyor discharge system while adopting an under-body wheel position.
The PROFILE COMPACT range features an electronic weighing system consisting of three load cells combined with a welded counterframe to ensure adequate ground
clearance.
Objective No. 1 –
Compactness!
Mixing with
two vertical augers
Feeding via
a broad cross-conveyor
•The 14 m3 model has an overall height of
2.53 m for easier access to most buildings and
faster loading.
•The two mixing augers powered by the same
drive boost product circulation with no trapping
areas.
•Wide discharge door for easier delivery of
high-fibre rations.
•Under-body wheel design: the outside width of
1.85 m at the wheels is ideal for the narrowest
feeding passages.
•Small auger diameter for lower leverage:
reduced power requirement.
•Fodder can be delivered to the right and left
sides of the machine with the broad crossconveyor guaranteeing even distribution.
•Double pitch auger geometry: optimum
product expansion both with a full tank and
small mixes.
•The cross-conveyor can optionally be equipped
with a hydraulic offset function or a tilting
conveyor to discharge fodder into troughs.
•Counterframe concept designed to preserve
weighing accuracy without penalising the
machine’s ground clearance.
•The PVC conveyor belt is synonymous with
silent operation and distribution without
recycling.
Technical specifications
PROFILE COMPACT 80 SERIES
1480
Body capacity
Machine height
Overall dimensions
1580
1680
1880
2080
m
14
15
16
18
20
m
2.53
2.69
2.83
2.99
3.19
3
Length
m
7.01
7.01
7.02
7.05
7.10
Width
m
2.35
2.35
2.35
2.38
2.40
Outside width at wheels
m
Feeding height
m
Ground clearance
m
1.85
1.94
0.55
0.35
Wheels
435/50 R 19.5
Recommended power
kW (HP)
215/75 R17.5
59 (80)
59 (80)
63 (85)
66 (90)
70 (95)
Indication of number of dairy cattle fed in a single pass
75 - 110
75 - 110
80 - 120
90 - 140
100 - 150
Tilting conveyor
optional
optional
optional
optional
optional
Hydraulic offset function on cross-conveyor
optional
optional
optional
optional
optional
KUHN S.A.
4 Impasse des fabriques - BP 50060 - F-67706 Saverne CEDEX
www.kuhn.com
Some machines have a considerable weight. Respect the total permissible weight of the tractor, its lift capacity and
maximum load per axle. The load on the front axle of the tractor must always be at least 20% of the unladen weight of
the tractor. Our material is produced in accordance with the European Machinery Directive in the member states of the
European Union. In countries outside the E.U., our machinery complies with the safety regulations set by the country
concerned. Some safety devices may have been removed from our leaflets in order to clarify the illustration. Under no
circumstances should the machine be operated without the necessary safety devices in place (as specified by the
assembly instructions and operators manual). We reserve the right to change any designs, specifications or materials
listed without further notice. Our models and trademarks are patented in more than one country. Machines and
equipment in this document can be covered by at least one patent and/or registered design. Trademarks cited in
this document may be registered in one or several countries.
Find
also KUHN on
www.kuhn.com and
To protect the environment, this leaflet is printed on chlorine-free paper. / Printed in France - 10.15 - Copyright KUHN 2013 - A72815GB
•Feeding can be performed within the tractor
outline.