STS00355TDC_01_V00R03_EN
MEDICAL DEVICE FOR THE CONTROL OF
MEDICAL GAS ALARMS.
EQUIPPED WITH 4 ANALOG INPUTS, 8 DIGITAL
OUTPUTS, 4 ANALOG OUTPUTS
SINTESY.eagle.S110 is a medical device used to control
alarms in medical gas distribution systems. It complies
with Directive 93/42/CEE e 2007/47/CE, identified in Class
IIb according to the requirements of Annex IX, rule 9, and
it also meets the requirements of the standard EN7396-1.
It has 4 analog inputs, 4 analog outputs and 8 digital
outputs which can be programmed by the user through
a comfortable and intuitive front keypad. For each input
it is possible to set the indication appearing during the
alarm condition.
The front panel provides acoustic and visuals signals
complying with EN60601-1-8; a yellow light to indicate a
medium priority alarms, a red light to indicate a high
priority alarm and a buzzer.
The acoustic emitter can be muted by the user for a
programmable time (max 15 min).
The digital outputs can be programmed to follow the
behavior of the alarm thresholds and internal faults.
These outputs can be connected, for example, to the
GSM module SINTESY S140 to dispatch phone calls,
SMS and/or e-mails.
The analog outputs (optional) can be programmed to
regenerate the analog input signals to be sent to other
control systems, and it simultaneously performs a signal
conversion. This way S110 can be used as a signal
converter too. Moreover, analog outputs can be
controlled via the RS485 communication ports.
The typical application is the control of level and
pressure of bulk tanks and cylinders for medical gases:
reading of the percentage of oxygen, measure of pres-
S110 /
S110-AO
sure in pipeline systems, reading of temperatures and,
in general, any physical quantity which can be
measured by a standard 4/20 mA transducer.
It can work as a stand-alone device or it can be part of a
network of other modules connected to a RS485 bus.
Through this communication port, S110 can be
controlled by a supervisory system SINTESY.eagle®
which, through a synoptic chart, displays the status of
all the sensors of the system.
Using SINTESY.eagle.S200.smart it is also possible to
monitor the status of alarms remotely.
Thanks to the software SINTESY.eagle.wizard and
using a standard PC, it is possible to program all the
available functions. Moreover, it is possible to archive
the configuration of a single S110 module, or of the
whole plant, increasing the efficiency in case of
reprogramming and achieving a better traceability of th
installed modules.
Key features

Power supply 24V~, 20 VA

Internal protection fuse

4 analog inputs which can be set as: 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5V, with external / internal
power supply

Up to two alarms thresholds can be set for each input (A1 e A2), choosing priority too (medium, high)

8 programmable optoisolated digital outputs +24V= @100mA

Configuration parameters stored in the internal memory

LCD display with backlight, 16 characters x 2 rows

Alphanumeric keyboard with 16 buttons (like a mobile phone)

Power on green led

Communication green led

High priority alarm high efficiency red led

Medium priority alarm high efficiency yellow led

Audio emitter mode: EN60601-1-8, double tone, single tone, siren

Temporary muting (max 15 min)

Permanent muting by password

RS485 termination on board

Option for MODBUS protocol

Configuration by SINTESY.eagle.wizard

RTU (Remote Telemetry Unit) for SINTESY.eagle® system

Compliance with EN60601-1 3a Ed., EN 60601-1-6, EN60601-1-8, EN62366, EN62304, EN7396-1

DIN rail (EN 60715) according to DIN 43880. Modules: 9M

Certification CE0051

Alarm acoustic pressure of >70dB @1m

Working temperature 0/+60 °C; storage temperatura -10/+70 °C
The product is certified Medical Device, CE0051
according to European Directives 93/42/EEC and 2007/47/EC, Annex II;
Class IIb, following Annex IX, rule 9
SINTESY S.r.l. is certified:
ISO 13485 Medical Device – Quality management systems
ISO 9001 Quality management systems
SINTESY S.r.l.
Via dell’Artigianato 2B, 20061, Carugate (MI) - ITALY
Tel. +39 0292502558 - [email protected]
www.sintesy.it