Monday, September 5th of 2016
8:00-8:15
Chair - Welcome
8:15-8:30
UWE - Welcome
8:30-9:00
AutoForm - Industrial Lecture
9:00-9:30
Crown Technology - Industrial Lecture
9:30-10:00
Jaguar Land Rover - Industrial Lecture
10:00-10:20
Coffee Break
Monday, September 5th of 2016
Formability in Sheet
Metal Forming
Processes
(MS3)
Finite Element
Techniques and
Numerical Analysis
(GT4)
Process Modelling
(GT2)
Constitutive
Modelling
(GT1)
Chair
T.B. Stoughton
Room
10:20-10:30
Bristol Suite 3
J.M.A. Cesar Sa/X.
Huang
SS Great Britain
J. Mendiguren/T.
Balan
Empire
J.W. Yoon/B.R.
Baudard
Bristol Suite 2
Analysis of Strain Nonuniformity Index (SNI)
for different geometries
of drawn sheet metal
parts
(S. Jadhav, R. Tekaie, P.
Date)
Accelerating multiscale SF by exploiting
local macroscopic
quasi-homogeneities
(J. Gawad, M.
Khairullah, D. Roose,
A.V. Bael)
Modification of
Yoshida-Uemori
Model with
Consideration of
TransformationInduced Plasticity
Effect
(J. Hu, L. Knoerr, F.A.
Farha)
Large-Strain Cyclic
Response and
Martensitic
Transformation of
Austenitic Stainless
Steel at Elevated
Temperatures
(H. Hamasaki, T.
Nakano, E. Ishimaru,
F, Yoshida)
Nondestructive
Texture
Measurement of
Steel Sheets with
Compact Neutron
Source “RANS”
(M. Takamura et
al.)
Failure investigation for
QP steel sheets under
uniaxial and equalbiaxial tension
conditions
(D. Zou, S. Li, J. He, R.
Cui)
Knowledge Based
Cloud FE simulation –
data-driven material
charact. hot stamping
of Al alloys
(A. Wang, Y. Zheng, J.
Liu, O.E. Fakir, M.
Masen, L. Wang)
Numerical modelling
of the gas detonation
process of sheet
metal forming
(S.P. Patil, M. Popli,
V. Jenkouk, B.
Markert)
Crystal plasticity
modeling for
anisotropy and
formability of metals
(M.S. Pham, Y.
Jeong, M. Iadicola,
A. Creuziger, T.
Foecke, A. Rollet)
Experimental
validation of
numerical model for
asymmetric deep
drawing of DP780
steel sheet using
digital image
correlation
(X. Xue, J. Liao, G.
Vincze, A. Pereira)
Numerical assessment
of residual formability in
sheet-metal products:
towards design for
sustainability
(J. Falsafi, E. Demirci, V.
Silberschmidt)
A Grain Structure
Model based on
Voronoi polygon of
Non-oriented
Electrical Steel in
Blanking Process
(Z. Wang, S. Li, L.
Dong, J. He)
Effect of Geom.
Param. on
Formability and
Strain Path During
Tube Hydroforming
Process
(A. Omar, K.R.
Harisankar, A.
Tewari, K.
Narasimhan)
On the anelastic
behaviour and
nonlinear unloading
of AHSS
(A. Torkabadi, T.
Meinders, T.V
Boogaard)
Influence of
material modeling
on the earing
prediction in cup
drawing of AA3104
aluminum alloy
sheet
(H. Fukumasu, T.
Kuwabara, H.
Takizawa)
Numerical Validation
of an Optimized
Cooling System for
hot stamping Die
(A. Zakaria, M.A.
Abidin, M. Ibrahim,
A. Senin)
A Multi-Scale
Modeling of
Multiphase
Advanced High
Strength Steels
Based on Crystal
Plasticity and
Evolutionary Yield
Function
(F. Pourboghrat, T.
Park)
Development of
subroutine library
'UMMDp' for
anisotropic yield
functions applicable
to commercial FEM
codes
(H. Takizawa, T.
Kuwabara, K. Oide,
J. Yoshida)
Whole process
modeling of joining
of aluminum tubes
by extrusion-bulge
forming using a
polyurethane
elastomer medium
(J. Yang, H. Li, H.
Yang, G. Li)
Experimental
Verification of the
Strain NonUniformity Index
(SNI) Based Failure
Prediction
(D. Dhumal, P.
Kulkarni, P. Date, V.
Nandedkar)
Knowledge Based
Cloud FE simulation
– a multi-objective
FEA for advanced
simulation of hot
stamping process
(A. Wang, J. Liu, O.
Fakir, M. Masen, L.
Wang)
Lunch
Lunch
Lunch
10:30-10:40
10:40-10:50
10:50-11:00
11:00-11:10
11:10-11:20
11:20-11:30
11:30-11:40
11:40-11:50
Fracture Prediction
Using Modified Mohr
Coulomb Theory for
Non-Linear Strain Paths
Using AA3104-H19
(R. Dick, J.W. Yoon)
The meshless finite
block method and its
applications
(P.H. Wen, X.J.
Huang)
11:50-12:00
12:00-12:10
12:15-14:30
A Combined Isotropic,
Kinematic and Cross
Hardening Model for
Magnesium AZ31B-H24
under Non-linear Strain
Loading Path
(Y. Jia, Y. Bai)
Lunch
Lunch
Material Modelling
for Sheet Metal
Forming
(MS6)
Y. Korkolis
Bristol Suite 1
Monday, September 5th of 2016
Chair
Room
Plenary
Lecture
14:30-15:30
15:30-15:50
J.P. Ponthot
Bristol Suite
Isogeometric Analysis of Deformation, Inelasticity and Fracture In Thin-Walled Structures
Professor Rene de Borst
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Monday, September 5th of 2016
Chair
Room
15:50-16:00
16:00-16:10
Process Design and
Instabilities
(GT3)
Stochastics and
Optimization
(GT5)
Material Modelling
for Sheet Metal
Forming
(MS6)
Industrial
Applications
(GT6)
Incremental sheet
forming processes
(MS7)
J.B. Kim/W. Volk
J.W. Yoon/M.
Oliveira
T. Kuwabara/G.
Vincze
J.P. Ponthot/V.
Jenkouk
A. Habraken
Bristol Suite 3
SS Great Britain
Bristol Suite 2
Bristol Suite 1
Empire
Effect of the r-value
change on the
forming limit analysis
for a ultra-low
carbon steel sheet
(T. Hakoyama, T.
Kuwabara)
Improving Stamp
Simul. for a DoorOuter Part by
Accounting for
Realistic Friction and
Lubricant Conditions
(J. Hol, J.H.
Wiebenga, J. Stock,
J. Wied, K. Wiegand,
B. Carleer)
Effect of process
parameters on
geometric errors in
two-point ISF for AlCu-Mg Alloy
(X. Li, K. Han, H. Yu,
Y. Zhang, D. Li)
Numerical
Simulation of the
Roll Forming Process
of Aluminum Folded
Micro-channel Tube
(T. Zou, N. Zhou, Y.
Peng, D. Tang, D. Li)
Numerical tool path
optimization for
conventional sheet
metal spinning
processes
(B. Rentsch, N.
Manopulo, P. Hora)
Industrial
application and
validation of
Forming simulation
of the FlexForming
process
(A. Leacock, D. Ling,
M. Bergkvist)
Lubrication study
for Single Point
Incremental
Forming of Copper
(K. Jawale, J.F.
Duarte, A. Reis,
M.B. Silva)
Including die and
press deformations
in sheet metal
forming simulations
(J. Pilthammar, M.
Sigvant, S.K. Walter)
A Comparative
Study of Failure for
Incremental
Forming
(S. Wu, N. Song,
F.M. A. Pires)
Combining pressure
effect with local heat
treatments for
improving sheet metal
forming
(G. Palumbo, A.
Piccininni, P. Guglielmi,
D. Sorgente, L. Tricarico)
Process Windows for
Sheet Metal Parts
based on Metamodels
(D. Harsch, J.
Heingartner, D.
Hortig, P. Hora)
Characterization of the
interfacial heat transfer
coefficient in the HFQ®
process using different
die materials
(X. Luan, O.E. Fakir, K. Ji,
L. Wang)
Inverse modelling
approach in 3-point
bending for elastoplastic material
parameter
identification of thin
spring steel
(C. Mertin, K. Huse,
G. Hirt)
Numerical modelling of
drawbeads for forming
of aluminium alloys
(Y. Joshi, P.
Christiansen, I. Masters,
N. Bay, R. Dashwood)
Finite Element Based
Optimization Study on
Hydroformed Stepped
Tube
(K.R. Harisankar, A.
Omar, K.
Narasimhan)
Systematic Investigation
of the Influence of
Geomet. Param. of
Sheet Metal Parts on the
Appearance of Surface
Deflections
(A. Weinschenk, W.
Volk)
Robustness and
sensitivity analysis of
a virtual process
chain using the S-rail
applying random
fields
(T. Konrad, S. Wolf, K.
Wiegand, M.
Merklein)
16:10-16:20
16:20-16:30
16:30-16:40
16:40-16:50
16:50-17:00
17:00-17:10
17:10-17:20
17:20-17:30
Determination of bead
geometry considering
formability and stiffness
effect using generalized
forming limit concept
(W.G. Cha, S. Vogel, N.
Bursac, A. Albers, W.
Volk)
Numerical biaxial
tensile test for sheet
metal forming
simulation of
aluminum alloy
sheets based on the
homogenized CPFEM
(A. Yamanaka, Y.
Ishii, T. Hakoyama, P.
Eyckens, T.
Kuwabara)
Issues associated
with the use of
Yohida nonlinear
isotropic/kinematic
hardening material
model in AHSS
(M. Shi, L. Zhang, X.
Zhu)
Springback
Compensation
Process for High
Strength Steel
Automotive Parts
F. Onhon
Monday, September 5th of 2016
19:30-22:30
Welcome Reception
Bristol Suite
Tuesday, September 6th of 2016
Chair
Room
8:00-8:10
8:10-8:20
Material Modelling
for Sheet Metal
Forming
(MS6)
Process Modelling
(GT2)
Formability in Sheet
Metal Forming
Processes
(MS3)
Constitutive
Modelling
(GT1)
G. Vincze/J.W.
Yoon
B. Carleer/M.
Oliveira
T. Stoughton/X.
Zhu
D. Banabic/F.
Pourboghrat
Bristol Suite 3
Bristol Suite 2
Bristol Suite 1
Empire
Simulation of ultrathin sheet metal
forming using
phenomenological
and crystal
plasticity models
(F. Adzima, P.Y.
Manach, T. Balan, L.
Tabourot, S.
Toutain, J.L. Diot)
A Triaxial Failure
Diagram to predict
the forming limit of
3D sheet metal parts
subjected to
multiaxial stresses
(F. Rastellini, G.
Socorro, A. Forgas, E.
Onate)
Accurate drawbead
modeling in
stamping
simulations
(M. Sester, I.
Burchitz, E.S.
Argandona, F.
Estalayo, B. Carleer)
On the fracture
prediction of 304L
stainless steel sheets
utilizing different
hardening models
(S.A. Dizaji, H.
Darendeliler, B.
Kaftanoglu)
A staggered
coupling strategy
for the FEA of warm
deep drawing
(J. Martins, D. Neto,
J. Alves, M. Oliveira,
H. Laurent, L.
Menezes)
Simulation of
Formability of TRIP
Steels during Deep
Drawing
(D. Connolly, C.
Kohar, M.
Cherkaouil, H.E.
Kadiri, K. Inal)
Drawing simulation
by static implicit
analysis with the
artificial damping
method
(K. Oide, Y. Mihara,
T. Kobayashi, H.
Takizawa, T.
Amaishi, Y. Umezu)
Study of Fracture
Behaviour and Strain
Path During Tube
Hydroforming
Process
(A. Omar, K.R.
Harisankar, K.
Narasimhan, A.
Tewari)
Effects of forming
history on crash
simulation of a
vehicle
(M.I. Gokler, U.C.
Dogan, H.
Darendeliler)
Cold formability by
max force with nonassociated Hill48
anisotropic
hardening
(J. Lian, D.C. Ahn,
D.C. Chae, S.
Munstermann, W.
Bleck)
Coffee Break
Coffee Break
Constitutive modeling
of hot horming of
austenitic stainless
steel 316LN with
recrystallization in
the dislocation
evolution
(H. Kooiker, S.
Perdahciouglu, T.V.
Boogaard)
8:20-8:30
8:30-8:40
Modeling Material
Behavior during Hot
Blank – Cold Die (HBCD) Stamping of
Aluminium
(N. Zhang, F.A. Farha)
8:40-8:50
8:50-9:00
Investigation of High
Speed Friction Test of
Aluminum Alloys
(K. Ooki, S.
Takahashi)
9:00-9:10
9:10-9:20
9:20-9:30
Modeling of holeexpansion of AA6022T4 aluminum sheets
with anisotropic nonquadratic yield
functions
(Y. Korkolis, B.
Brownell, S.
Coppieters, H. Tian)
9:30-9:40
9:40-9:50
9:50-10:00
10:00-10:30
CANCELLED
Constitutve modeling
of magnesium alloy
sheets under strain
path changes
(J. Lee, Y. Lee, M.G.
Lee, D. Kim)
Coffee Break
Models of Anisotropic
Creep in Integral
Wing Panel Forming
Processes
(A. Oleinikov, A.
Oleinikov)
Investigations on
fracture curves in
strain and stress
space for advanced
high strength steel
forming
(S. Panich, K.
Drotleff, M. Liewald,
V. Uthaisangsuk)
Comparison of
Constitutive
Relationships of
Tubes Using Uniaxial
Tensile Tests and
Hydroforming
Experiments
(J. Li, L. Yang)
Crystal Plasticity
Constitutive Model
for Multiphase
Advanced High
Strength Steels to
Account for Phase
Transformation and
Yield Point Elongation
(T. Park, F.
Pourboghrat)
Non-Local Ductile
Damage Formulates
for Sheet Bulk Metal
Forming
(S. Beese, S.
Loehnert, P.
Wriggers)
Coffee Break
Tuesday, September 6th of 2016
Chair
Room
10:30-10:40
10:40-10:50
10:50-11:00
11:00-11:10
11:10-11:20
11:20-11:30
Process Modelling
(GT2)
J.B. Kim/J. Hol
T. Balan/K. Oide
J.W. Yoon
M. Oliveira/X.J.
Huang
R. Cardoso/S.
Hartmann
SS Great Britain
Bristol Suite 2
Empire
Bristol Suite 1
Bristol Suite 3
Friction and Lub.
Modeling in SMF
Simulations of the
VOLVO XC90 Inner
Door
(M. Sigvant, J.
Pilthammar, J. Hol,
J.H. Wiebenga, T.
Chezan, B. Carleer, A.
van den Boogaard)
Forming parts over
small radii
(S. Hazra, D.J.
Hughes, M.P.
Pereira, B. Rolfe)
Development of
measurement
method of work
hardening in large
plastic strain SMF
(N. Yoshikawa, T.
Yamashita, S.
Shirakami, O. Kada,
T. Yoshida, S.
Hiwatashi)
Evaluation of BiMaterial Crack Using
The Finite Block
Method
(P. Hinneh, P.H. Wen)
The Role of Evolutive
Elastic Properties in
the Performance of a
SF Spring Applied in
Multimedia Car
Industry
(J. Faria, J. Silva, P.
Bernardo, M. Araujo,
J.L. Alves)
Foil Blanking Using
Rubber Tool by
Finite Element
Simulations and
Experiments
(Y.K. Chen, X.X. Li,
LH. Lang, R. Xiao,
Y.L. Ge)
Advanced
constitutive
modeling of AHSS for
springback
prediction after Udraw double
stamping process
(J. Choi, J. Lee, M.
Lee, F. Barlat)
Meshless local
integral equation
method for twodimensional nonlocal
elastodynamic
problems
(X.J. Huang, P.H.
Wen)
An isogeometric
Reissner-Mindlin
shell element for
dynamic analysis
considering
geometric and
material
nonlinearities
(P. Sobota, W.
Dornisch, S. Klinkel)
A Numerical Analysis
on the Local
Deformation of a
Spacer Grid Structure
for Nuclear Fuel Cells
(M. Jang, G. Na, H.
Shin, J.B. Kim)
Sensitivity analysis
on the AC600
aluminium skin
component
(J. Mendiguren, J.
Agirre, E. Mugarra,
L. Galdos, E. Saenz)
DD3MAT – a code
for yield criteria
anisotropy
parameters
identification
(P. Barros, P.
Carvalho, J. Alves, M.
Oliveira, L. Menezes)
Limit dome height
test of very thin brass
sheet considering the
scaling effect
(J. Sahu, S. Mishra)
Roll levelling semianalytical model for
process
optimization
(E. Silvestre, D.
Garcia, L. Galdos, E.
Saenz, J.
Mendiguren)
Texture evaluation in
ductile fracture
process by neutron
diffraction
(H. Sunaga et al.)
Lunch
Lunch
Lunch
11:50-12:00
12:15-14:00
Isogeometric
Analysis of
Structures with
Applications to Shells
and Contact/Impact
(MS5)
Industrial
Applications
(GT6)
11:30-11:40
11:40-11:50
Finite Element
Techniques and
Numerical Analysis
(GT4)
Material Modelling
for Sheet Metal
Forming
(MS6)
Development of 3D
thick shell and its
validity for sheet
metal forming
(N. Ma, X. Zhu, T.
Ogawa, R. Liu, Y.
Harada)
Isogeometric
Analysis with LSDYNA
(S. Hartmann, D.
Benson, A. Nagy)
Remapping
algorithms:
application to
trimming operations
in sheet metal
forming
(D.M. Neto, C. Diogo,
T. Neves, M.C.
Oliveira, J.L. Alves,
L.F. Menezes)
Contact Modelling in
Isogeometric
Analysis: Application
to Sheet Metal
Forming Processes
(R. Cardoso, O.
Adetoro, D. Adan)
Lunch
Lunch
Tuesday, September 6th of 2016
Chair
Room
J.M.A. Cesar de Sa
Bristol Suite
Plenary
Lecture
14:00-14:45
Chair
Room
Plenary
Lecture
14:45-15:30
15:30-15:50
Professor Eugenio Onate
O. Cazacu
Bristol Suite
Two-scale Modelling of material degradation and failure
Professor Ferri Aliabadi
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Tuesday, September 6th of 2016
Chair
Room
15:50-16:00
16:00-16:10
16:10-16:20
16:20-16:30
16:30-16:40
16:40-16:50
16:50-17:00
17:00-17:10
17:10-17:20
17:20-17:30
17:30-17:40
17:40-17:50
Finite Element
Techniques and
Numerical Analysis
(GT4)
Constitutive
Modelling
(GT1)
Challenges in
characterization and
modelling of
Titanium materials
(MS2)
Formability in Sheet
Metal Forming
Processes
(MS3)
Forming defects,
material and shape
instabilities
(MS1)
X.J. Huang/M.
Oliveira
Y. Korkolis/K.
Inal
O. Cazacu/E.
Massoni
X. Zhu/S. Hazra
P.Y.
Manach/J.M.A.
Cesar Sa
Empire
Bristol Suite 3
Bristol Suite 1
Modelling strategy
for clinched joints in
large assemblies
(A. Breda, S.
Coppieters, D.
Debruyne)
Bristol Suite 2
SS Great Britain
Hencky’s Model for
Elastomer Forming
Process
(A. Oleinikov, A.
Oleinikov)
Crystal-plasticity
finite-element
analysis of
deformation
behavior in a
commercially pure
titanium sheet
(T. Hama, A. Kobuki,
H. Fujimoto, H.
Takuda)
FEM analysis about
springback control
with lump-punch
penetration after Vbending
(T. Aso, T. Lizuka)
Prediction of ballistic
limit of aluminium
sandwich panel
(J. Campbell, T. De
Vuyst, R. Vignjevic, K.
Hughes)
A comparison of
strain calculation
using digital image
correlation and finite
element software
(D. Banerjee, M.
Iadicola)
Paint-bake Effect on
the Plasticity and
Fracture of
Aluminum 6451-T4
Sheets
(R.A. AKL, D. Mohr)
Constitutive
modeling of a
commercially pure
titanium and
validation using
bulge tests
(B.R. Baudard, E.
Massoni)
Fracture Prediction
for HSS in Drawbending Using the
Forming Limit Stress
(C. Sekiguchi, T.
Hakoyama, T.
Kuwabara, H.
Fukiharu)
Prediction of plastic
instabilities under
thermo-mechanical
loadings in tension
and simple shear
(P.Y. Manach, L.F.
Mansouri, S.
Thuillier)
Contact Modeling of
Large Radius Air
Bending with Closest
Point Project
Procedure
(V. Vorkov, A.
Konuykhov, D.
Vandepitte, J. Duflou)
The concept of
virtual material
testing and its
application to SMF
simulations
(A. Butz, J.
Pagenkopf, M.
Baiker, D. Helm)
On the modelling of
strength differential
and anisotropy
exhibited byTi alloys
(N. Manopulo, C.
Raemy, P. Hora)
The bendability of
ultra-high strength
steels
(S. Hazra, P.
Efthymiadis, A.
Alamoudi, R. Kumar,
B. Shollock, R.
Dashwood)
Non-Local models for
ductile fracture
(J.M.A. Cesar de Sa,
A. Azinpour, A.
Santos)
Advanced solid
elements for sheet
metal forming
simulation
(V.M. Ferrandiz, R.
Rossi, F. Flores, E.
Onate)
Analysis of earing
behavior in deep
drawing of ASS 304
at elevated
temperature
(A.K. Gupta, A.
Deole, N. Kotkunde,
S.K. Singh, G. Jella)
Plastic deformation
of high-purity
titanium: model
development and
validation using the
Taylor cylinder
impact test
(N. Chandola, B.R.
Baudard, O. Cazacu)
Development of New
Hole Expansion
Testing Method
(H. Kim, J. Shang, K.
Beam, A. Samant, C.
Hoschouer, J.
Dykeman)
A shear ductile
fracture criterion for
metal forming
(Y. Lou, J.W. Yoon)
Evaluation of Hot
Forming Effects
Mapping for CAE
Analyses
(L. Knoerr, T. Faath, J.
Dykeman, S.
Malcolm)
Numerical
Simulations of
Biaxial Experiments
on Damage and
Fracture in Sheet
Metal Forming
(S. Gerke, M.
Schmidt, M. Brunig)
Non-Local Damage
Modelling of Sheet
Metal Forming
Processes with ALE
Formulation
(M. Adetoro and R.
Cardoso)
Springback of
titanium tube
bending considering
Bauschinger and
Young’s modulus
variation
(J. Ma, H. Yang, H. Li,
Z. Tao, G. Li)
Advances in
characterization of
sheet metal forming
limits
(Thomas B.
Stoughton, John E.
Carsley, Junying Min,
Jianping Lin)
Exp. and Num.
Investigations of
Strain Rate on
Failure of AA7075 at
Elevated
Temperatures
(H. Zand, F.
Zhalehfar, A.
Vafaeesefat)
Wednesday, September 7th of 2016
Chair
Room
Plenary
Lecture
8:30-9:15
Chair
Room
Plenary
Lecture
9:15-10:00
10:00-10:20
E. Massoni
Bristol Suite
Single Point Incremental Forming to increase material knowledge and production flexibility
Professor Anne Habraken
T.B. Stoughton
Bristol Suite
Advances in Constitutive and Failure Models for Sheet Forming Simulation
Professor Jeong Whan Yoon
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Wednesday, September 7th of 2016
Chair
Room
10:20-10:30
10:30-10:40
10:40-10:50
10:50-11:00
11:00-11:10
Process Modelling
(GT2)
Constitutive Modelling
(GT1)
Isogeometric Analysis
of Structures with
Applications to Shells
and Contact/Impact
(MS5)
Challenges in
characterization and
modelling of
Titanium materials
(MS2)
B. Carleer/K. Oide
T.B. Stoughton/F.
Pourboghrat
S. Hartman/O.
Adetoro
B. Baudard/J.W.
Yoon
Bristol Suite 3
Bristol Suite 1
SS Great Britain
Bristol Suite 2
Numerical modelling of
the effect of using multiexplosives on the
explosive forming of steel
cones
(T. De Vuyst, K. Kong, N.
Djordjevic, R. Vignjevic,
J.C. Campbell and K.
Hughes)
Modeling the ductile
fracture and the plastic
anisotropy of DC01
steel at room
temperature and low
strain rates
(V. Tuninetti, S. Yuan,
G. Gilles, C. Guzman,
A.M. Habraken, L.
Duchene)
Isogeometric phasefield modeling of brittle
and ductile fracture in
shell structures
(M. Ambati, J. Kiendl,
L. De Lorenzis)
Constitutive
modeling of plastic
deformation and
damage in
anisotropichighpurity titanium and
validation using exsitu and in-situ
tomography data
(O. Cazacu, B.R.
Baudard, N.
Chandola)
Calibration of Gursontype models for porous
sheet metals with
anisotropic nonquadratic plasticity
(M. Gologanu, A. Kami,
D.S. Comsa, D.
Banabic)
Shape optimization for
contact problems
based on isogeometric
analysis
(B. Horn, S. Ulbrich)
A comparison of
deformation and
failure behaviors of
AZ31 and E-form Mg
alloys under Vbending test
(S. Choi, J. Singh,
M.S. Kim, J.W. Yoon)
A Novel Forming Method
of Aluminium Sheet
Based on Superposition
Principle of
Electromagnetic Local
Forming
(A. Long, W. Wang, C.
Fang, X. Wu, M.Wan)
Advanced Friction
Simulation of
Standardized Friction
Tests: Numerical and
Experimental Demo
(J.H. Wiebenga, J. Hol,
M. Horning, F. Dietrich,
C. Dane)
Isogeometric shape
optimisation of shell
structures using
multiresolution
subdivision surfaces
(X. Xiao, K. Bandara, F.
Cirak)
Analysis of Square
Cup Deep-Drawing
Test of Pure
Titanium
(T. Ogawa, N. Ma,
M. Ueyama, Y.
Harada)
Prediction of part shape
and associated material
property in hot-press
forming using finite
element analysis
(H. Kim, J. Ha, M. Lee, F.
Barlat)
Numerical
determination of the
onset of local necking
using time dependent
method and dynamic
material param.
(D. Jocham, W. Volk)
Trimming Simulation of
Forming Metal Sheets
Isogeometric Models
by Using NURBS
Surfaces
(D.H. Adan, M.
Adetoro, R. Cardoso)
Process Modelling and
Die Design Concepts for
Forming Aircraft Sheet
Parts
(H.A. Hatipoglu, C.O.
Alkas)
Crack initiation
observation and local
stress analysis in shear
test piece of ultra-high
strength steels
(N. Ma, K. Takada, N.
Sugimoto)
Lunch
Lunch
The effect of welding line
heat-affected zone on the
formability of tube
hydroforming process
(C.K. Chiuhuang, C.E.
Hsu, P.K. Lee)
11:10-11:20
11:20-11:30
11:30-11:40
11:40-11:50
11:50-12:00
12:00-12:10
12:10-12:20
12:20-14:00
Lunch
Lunch
Wednesday, September 7th of 2016
14:00-15:00
Benchmark 1
15:00-16:00
16:00-16:20
16:20-17:20
Benchmark 2
Coffee Break
Coffee Break
Coffee Break
Benchmark 3
Coffee Break
Thursday, September 8th of 2016
Chair
Room
Plenary
Lecture
9:00-10:00
10:00-10:30
James Campbell
Bristol Suite
Strain Rate Dependant Material Model for Orthotropic Metals
Professor Rade Vignjevic
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Thursday, September 8th of 2016
Constitutive Modelling
(GT1)
Process Modelling
(GT2)
Formability in Sheet Metal
Forming Processes
(MS3)
Material Modelling
for Sheet Metal
Forming
(MS6)
Chair
O. Cazacu/F.
Pourboghrat
T. De Vuyst/J.
Campbell
T. Stoughton/X. Zhu
J.W. Yoon/T.
Kuwabara
Room
10:30-10:40
Bristol Suite 3
SS Great Britain
Bristol Suite 2
Bristol Suite 1
Numerical evaluation
of the electromagnetic
forming of DP780 steel
workpiece with
aluminum driver sheet
(H. Park, J. Lee, S.J.
Kim, Y. Lee, D. Kim)
Application of Strain NonUniformity Index (SNI)
Based Approach to Predict
Failure in Sheet Metal
Components
(P. Date, K. Jamadar)
Error assessment in
post-necking
hardening behavior
identification of mild
steel sheet
(S. Coppieters, T.
Hakoyama, K. Denys,
D. Debruyne, T.
Kuwabara)
Plane stress yield
function described by
3rd-degree spline curve
and its application
(T. Aamaishi, H.
Tsutamori, E. Lizuka, K.
Sato, Y. Ogihara, Y.
Matsui)
Implementation of
Virtual Models from
Sheet Metal Forming
Simulation into
Physical 3D Colour
Models using 3DPrinting
(S. Junk)
On Simulation of Edge
Stretchability of 800MPa
Advanced High Strength
Steel
(N. Pathak, C. Butcher, M.
Worswick)
Mechanical behavior
of TWIP steel under
shear loading
(G. Vincze, M. Butuc,
F. Barlat)
Constitutive modeling
of room-temperature
deformation and failure
of polycrystalline
Molybdenum
(G. Kleiser, B.R.
Baudard, O. Cazacu, C.
Pasiliao)
The friction coefficient
evolution of a MoS2
coated contact during
sliding wear
(T. Chan, Y. Hu, M.
Gharbi, D. Politis, L.
Wang)
A study on the performance
of ductile failure under
different range of stress
triaxiality with
experimental validation
(R. Amaral, P. Teixeira, E.
Azinpour, A. Santos, J.
Cesar Sa)
Influence of Yield
Condition on the
Accuracy of Earing
Prediction for Steel
Sheets
(M. Gosling)
An interpolation type
anisotropic yield
function and its
application in sheet
metal forming
simulation
(R. Xiao, F. Peng, X.
Dong)
Die Starter: A New
System to Manage
Early Feasibility in
Sheet Metal Forming
(R. Narainen, H.
Porzner)
10:40-10:50
10:50-11:00
11:00-11:10
11:10-11:20
11:20-11:30
11:30-11:40
11:40-11:50
11:50-12:00
A New Thermo-ElastoViscoplastic Crystal
Plasticity Framework to
Predict the Formability
of Aluminum Alloys at
Elevated Temperatures
(K. Inal, E. Cyr, R.K.
Mishra)
12:00-12:10
Joining of tubes by gas
detonation forming
(V. Jenkouk, S.P. Patil,
B. Markert)
12:10-12:20
12:20-14:00
Lagrangian and Arbitrary
Lagrangian Eulerian
Simulations of Cold Roll
Forming Processes
(Y. Crutzen, R. Boman, L.
Papeleux, J.P. Ponthot)
Constitutive modelling
of aluminium alloy
sheet at warm
forming temperatures
(S. Kurukuri, M.
Worswick, S. Winkler)
Lunch
Lunch
Lunch
Lunch
Thursday, September 8th of 2016
14:00-17:30
Social Programme
18:30-23:30
Banquet
Friday, September 9th of 2016
9:00-13:00
Rolls Royce Technical Tour