Setting up SJUMobile
(Wireless Internet Access for personal devices)
St. John’s University provides wireless internet access to personal devices for all current registered students. To
setup a connection, please follow the instructions below for your particular device. In order to login
successfully, the following information will be required:
o Username: SJU Network account username – First letter of the first name, first four letters of the
last name, and the last three numbers of the X Number (or the last three numbers of the social
security number)

Note: This is the same username you use to log into the computers on campus and your St.
John’s University laptop. If you are unsure of your username, please see Laptop Support
Center or the Computer Labs.
o Password: Capital “S”, Lowercase “j” followed by the StormCard ID Number. This is the same
password that is used to log into the computers on campus.
Example:
Username:
Password:
jsmit123
Sj91234567
Instructions below are available for the following devices:







Android Phone or Tablet
Apple ® iOS6, iOS7 & iOS8
Apple OSX 10.6 and newer
Windows 8 & 8.1
Windows 7
Windows XP
Windows Phone 7.5/8
If you are still having issues connecting, please contact
the Laptop Support Center or the MicroLabs.
Page 1 of 17
Android
To connect to SJUMobile on your Android device please follow the instructions below.
1. Go to settings
2. Under the “Connections” tab, click Wi-Fi.
Make sure the setting is set to ON.
3. Search for wireless networks available, and click on SJUMobile
Page 2 of 17
4. A prompt will appear to enter in University credentials. Under “Identity,” enter in the assigned SJU
username, and the Password in the corresponding area. Then, click CONNECT.
5. When connection is authenticated, it will connect.
Page 3 of 17
iOS
for iPad, iPhone, & iTouch
1. Select Settings
2. Select Wifi
3. Make sure Wifi is turned on. If it is off you must turn on your wifi
4. Select SJUMobile
5. Enter the assigned SJU Username and Password, and click Connect.
Page 4 of 17
Apple OSX
OS 10.6 – 10.10
1. Click the Wifi icon in the top bar on the right side
2. Select “SJUMobile” from the available networks.
3. A prompt will appear asking you to enter in Enterprise Credentials. Enter the assigned SJU network
Username and Password. Click JOIN.
Page 5 of 17
4. A prompt will appear asking to accept the authentication certificate. Click CONTINUE.
5. Depending on the security settings, a prompt will also appear for the computer username and password
to confirm the Certificate Trust Settings. Click UPDATE SETTINGS, after the log in information is
entered.
6. Once it is accepted, network connection should be working. Please verify by click on the Wi-Fi icon at
the top of your screen. You should see a check mark next to SJUMobile.
Page 6 of 17
Windows 8 / 8.1
1. From your desktop, right click the wireless signal in the bottom right of the taskbar.
2. Select “Open Network and Sharing Center.”
3. Click “Setup a New Wireless Connection or Network.”
4. Click Manually Connect to Wireless Network.
Page 7 of 17
5. Enter the following information:
a. Network Name (Case Sensitive):
b. Security Type:
c. Encryption Type:
SJUMobile.
WPA Enterprise.
TKIP
6. Click Next
7. Click Change Security Settings
Page 8 of 17
8. Under the “Security” tab make sure under “Choose network authentication method:” “Microsoft:
Protected EAP (PEAP)” is selected. Click Settings.
9. Scroll down in the Certificate Authorities, and Check of “VeriSign Class 3 Public Primary Certification
Authority –G5.” Authentication Method should be set as “Secured password (EAP-MSCHAPv2)”.
Click Configure next to that.
Page 9 of 17
10. Verify that there is no check mark next to the option to “Automatically use my Windows logon name
and password( and domain if any)”. Click OK.
11. Click the wireless signal in the taskbar and the available wireless networks will slide in from the right of
the screen. Click to Connect to SJUMobile.
12. A prompt for a username and password will appear to initiate connection.
(Please see the first page of this document for Username & Password configurations.)
Page 10 of 17
Windows 7
1. Click on your wireless signal in your taskbar
2.
3.
4.
5.
Select Open Network Sharing Center
Select Manage wireless networks
Select Add
Select Manually Create network Profile:
6. Enter the following information:
a. Network Name (Case Sensitive):
b. Security Type:
c. Encryption Type:
d. Click Next.
SJUMobile.
WPA Enterprise.
TKIP
Page 11 of 17
7. Select “Change connection settings”
8. Under the “Security” tab make sure under “Choose network authentication method:” “Microsoft:
Protected EAP (PEAP)” is selected. Then, Click Settings.
Page 12 of 17
9. Scroll down in the Certificate Authorities, and Check of “VeriSign Class 3 Public Primary Certification
Authority –G5.” Authentication Method should be set as “Secured password (EAP-MSCHAPv2)”.
Click Configure next to that.
10. Verify that there is no check mark next to the option to “Automatically use my Windows logon name
and password (and domain if any)”. Click OK.
11. Click Ok on SJUMobile Wireless Network Properties
12. A prompt should appear for a Username and Password. 13. Then click Save
(Please see the first page of this document for Username & Password configurations.)
Page 13 of 17
Windows XP
1. Click on your wireless signal in your taskbar
2. Click change advance settings
3. In the Wireless Network Connection Properties, select Wireless Networks tab. Make sure there is a
check mark next to the option for “Use Windows to configure my wireless networks settings.” Then,
Click ADD, under Preferred Networks.
Page 14 of 17
4. When the new window opens up under the “Association” tab. In the area labeled Network name
(SSID) enter in SJUMobile (This is case sensitive). Under Network Authentication select WPA2
5. Under the tab labeled “Authentication,” the EAP type should be selected as “Protected EAP
(PEAP).” Then, click Properties.
Page 15 of 17
6. Under the “Trusted root Certification Authorities:” that you have selected “VeriSign Class 3 Public
Primary Certification Authority –G5.” Then, click Configure under Authentication Method.
7. Make sure you “Automatically use my Windows logon name and password (and domain if any) is
not selected.
8. Click Ok on the Protected EAP Properties
9. Click Ok on Wireless Network Properties
10. Click Ok on Wireless Network Connection Properties
11. You should see a window pop up requesting you to enter in your username and password.
12. A prompt should appear for a Username and Password.
(Please see the first page of this document for Username & Password configurations.)
13. Then Click Save.
Page 16 of 17
Windows Phone 7.5 / 8
1. Select Settings
2. Select Wi-Fi
3. Make sure Wi-Fi networking is switched on.
4. Select SJUMobile in the Networks Listed
5. Enter your user name and password
(Please see the first page of this document for Username & Password configurations.)
Page 17 of 17