Marine Products
ROD HOLDER WELD-ON WITHOUT FLANGE: 1-1/2” I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHP15C
Clear
Brushed
RHB15C
• Designed for T-Tops, Tuna towers, and Radar arches.
• Rod holder measures 8-1/2” OAL and has a 1-1/2”
inside diameter.
• Tube is polished to a mirror finish or brushed to match
our pipe, then brite dipped anodized; comes complete
with the soft liner and E-Tec’s famous internal welded
in pin.
• Suggested tackle usage up to 50 lbs.
ROD HOLDER WELD-ON WITHOUT FLANGE: 1-7/8’ I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHP19C
Gold
Polished
RHP19G
Clear
Brushed
RHB19C
• Designed forT-Tops, Tuna towers and Radar arches.
• Rod holder measures 10” OAL and has a 1-7/8”
inside diameter.
• Tube is polished to a mirror finish or brushed to match
our pipe, then brite dipped anodized; comes complete
with soft liner and E-Tec’s famous internal welded in
pin.
• Best finish and strongest rod holder available
• Suggested tackle usage 30 lbs. to 130 lbs.
Please check with your local T&C Metals Branch for updates, as specifications,
materials availability, prices and terms of purchase may change without notice.
www.tc-alum.com
A-25
Marine Products
ROD HOLDER WELD-ON - 23o: 1-1/2” I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHW23P15C3
Gold
Polished
RHW23P15G
• Designed for T-Tops, towers & Radar arches.
• Rod holder measures 8-1/2” OAL and has a 1-1/2”
inside diameter.
• Mount plate is 3/8” thick.
• Both the tube & mount flange are polished to a mirror
finish, then brite dipped anodized. e have added a
hole in the mount plate for attaching a safety lanyard.
• Has E-Tec’s famous internal welded in pin.
• Suggested tackle usage up to 50 lbs.
ROD HOLDER WELD-ON - 23o: 1-7/8” I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHW23P19C
Gold
Polished
RHW23P19G
• Designed for T-Tops, Tuna towers & Radar arches.
• Rod holder measures 10” OAL and has a 1-7/8“ inside
diameter.
• Mount plate is 3/8” thick.
• Both the tube & mount flange are polished to a mirror
finish, then brite dipped anodized. e have added a
hole in the mount plate for attaching a safety lanyard.
• Has E-Tec’s famous internal welded in pin.
• Suggested tackle usage 30 lbs. to 130 lbs.
A-26
Please check with your local T&C Metals Branch for updates, as specifications,
materials availability, prices and terms of purchase may change without notice.
www.tc-alum.com
Marine Products
“TULIPTM”
ROD HOLDER WELD-ON TULIPTM: 1-3/4” I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHTP175CSP
Gold
Polished
RHTP175GSP
Clear
Brushed
RHTB175C
Gold
Brushed
RHTB175G
• Designed for T-Tops, towers & poling platforms.
• Rod holder measures 10-1/8” OAL and has a 1-3/4”
inside diameter.
• Has E-Tec’s famous internal welded in pin.
• Suggested tackle usage up to 50 lbs.
ROD HOLDER WELD-ON TULIPTM - 23o: 1-3/4” I.D
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHT23PC38F
Gold
Polished
RHT23PG38
• Designed for T-Tops, Tuna towers, and Radar Arches.
• Rod holder measures approximately 10-1/8” OAL and
has a 1-3/4” inside diameter.
• Both the tube & mount flange are polished to a mirror
finish then brite dipped anodized. e have added a
hole in the 3/8” thick mount plate for attaching a safety
lanyard.
• Has E-Tec’s famous internal welded in pin.
• Suggested tackle usage up to 50 lbs.
Please check with your local T&C Metals Branch for updates, as specifications,
materials availability, prices and terms of purchase may change without notice.
www.tc-alum.com
A-27
Marine Products
“BIG TULIPTM”
ROD HOLDER WELD-ON TULIPTM: 1-7/8” I.D.
(Polished or Brushed)
Color
Finish
P/N
Clear
Polished
RHTP19C
Gold
Polished
RHTP19G
Clear
Brushed
RHTB19C
• Designed for Big T-Tops, Tuna, Marlin & Half towers.
• Rod holder measures approximately 10-1/4” OAL
and has a 1-7/8” inside diameter.
• For big tackle fisherman.
• Has E-Tec’s famous internal welded in pin.
• Suggested usage is 30 lb. tackle to 130 lb. tackle.
ROD HOLDER WELD-ON TULIPTM - 23o: 1-7/8” I.D.
Big Tulip™ with Flange (Polished)
Color
Finish
P/N
Clear
Polished
RHT23P19C
Gold
Polished
RHT23P19G
• Designed for Big T-Tops, Tuna, Marlin & Half towers.
• Rod holder measures approximately 10-1/4” OAL
and has a 1-7/8” inside diameter.
• Both the tube & mount flange are polished to a
mirror finish, then brite dipped anodized. e have
added a hole in the 3/8” thick mount plate for
attaching a safety lanyard.
• Heavy duty Tulip™ with flange for big tackle fish man; E-Tec’s exclusive heavy duty welded in pin was
designed with a custom locking pin with a full radius
to fit perfectly on all fishing rod
• Will not damage the end of your customer’s custom
fishing rod
• Suggested usage is 30 lb. to 130 lb. tackle.
A-28
Please check with your local T&C Metals Branch for updates, as specifications,
materials availability, prices and terms of purchase may change without notice.
www.tc-alum.com