DIGITAL REAR-VIEW
Electronic rear-view mirror system
Electronic video rear-view mirror system from I+ME ACTIA
This new solution from I+ME ACTIA replaces conventional external mirrors with external cameras mounted on the side of railway carriages, trams, subway and
commuter trains.
In addition to the standard rear-view function, a
special video matrix has been developed for this
application to enable surveillance of the vehicles’
doorways.
To provide the driver with a good view - particularly on a
long train - of all doorways and automatic traction, the
front and rear cameras are used.
When the video rear-view system is used on a train with a
maximum of four cars or indeed on a push-pulltrain, each
cars’ video rearview system is automatically connected to
a complete system which acts as if on a single vehicle.
Your benefits
Significally lower profile than conventional mirrors
µ
Optimized 3:4 display
µ
Reduced risk of damage
µ
Optional camera imaging
µ
Better overview by using multiple cameras
µ
High security level: Designed to SIL requirements
µ
Rear-view mirror system
Electronic rear-view mirror system - components
Exterior rear-view mirror camera
Resolution:
420 TVL (640 x 480 pixels)
Image sensor:
1/4" CMOS / PAL
Sensitivity:
0.025 lux
Protection class:
IP 67
Focal length/opening angle:
6 mm, 33° / 25°
Video outputs:
balanced, composite
A heavy-duty aluminium base plate, ultramid
plastic housing and borofloat glass front allows
applications in high speed trains. The camera can
be painted in all RAL colours according to customer
requirements. The heater can either be started
with automatic thermostat and manual. The
camera module is perfectly designed to suit the
requirements of an electronic mirror system.
10,4" TFT train monitor
The 10,4" train monitor has been developed for use
in rail traffic and meets the requirements of train
certifications.
It can be mounted vertically or horizontally with
standard VESA-mounting points.
Video inputs: either coaxial with BNC or twisted pair
with M12.
Resolution:
800 x 600 pixels (SVGA)
Luminance:
400 cd / m²
Contrast:
700 : 1
Voltage:
24 VDC ( 9 bis 36 VDC)
Video inputs:
asymmetrically
2 x CVBS ( 11 xx 75Ù
)
110Ù two-wire
Dimensions / weight:
220 x 280 x 70 mm / ca. 3 kg
Video matrix
Unit:
19"-format, 3 RU, reduced width
Input voltage:
9-36 V DVC
Inputs und outputs:
M12-D , BNC
Power supply:
Central for monitor and cameras
Control:
11 digital inputs
Dimensions / weight:
147 x 100 x 175 mm / ca. 1.75kg
This allows the automatic rear-view mirror
function while driving as surviellance door areas
at the station with cameras and monitors.
It can be used for bi-directional vehicles in traction of up to 4 cars.
A video rear-view mirror system consists per
vehicle of a video matrix and up to 4 rear-view
monitors.
Contact
I+ME ACTIA GmbH
Dresdenstr. 17/18
38124 Braunschweig
Germany
Tel: + 49 (0) 531 38 70 1-0
Fax: + 49 (0) 531 38 70 1-88
Mail: [email protected]
Web: www.actiacctv.com
All details are for information only and do not represent any legally binding guarantee as to the accuracy or completeness of the content.
All information is subject to change without notice. All rights reserved. © 2012 I+ME ACTIA GmbH - IR12878A