iVIEW-100-40
Handheld HMI Controller
Introduction
ICP DAS iVIEW-100 series are compact handheld controllers
with low cost/high performance text/graphic LCD display, special
for industrial environment requiring reliability & PC-compatibility.
The iVIEW-100-40, an all-in-one pack controller, can work
independently with its own CPU, I/O Board, full keys Keypad,
Text/Graphic LCD, inside buzzer and in-packed connecting
cables to monitor and control the Data Inputs and Outputs.
The iVIEW-100-40 is powered by an 80188-40 CPU with 512K
bytes of SRAM, 512K bytes of flash memory, and built in
MiniOS7, RTC, NVSRAM and EEPROM. It supports optional
battery backup memory for retaining more data. There are 4 DI,
4 DO (2 relay), 2 COM for RS232 / RS485 communication.
The iVIEW-100 series can be also used as a HMI device for our I-7188, PAC-7186 and I-8000 series embedded controller.
Since the basic hardware design of iVIEW-100 is similar to that of I-7188 series, all our available software can be used in
iVIEW-100. User can design iVIEW-100 application with C Language. We will provide iVIEW-100E with a 10/100 mega Ethernet
port for internet.
Features
 Provides 128x64 dots, 16x8 characters, STN, Yellow-




Green Backlight LCD that can show text, number, real,
Boolean icon, BMP graphic and draw pixel, line, box,
Lamp icon in the same page and max to 48 pages.
Default has 4 digital inputs and 2 relay outputs
connected with a Mini-DIN connector (CA-M910).
Jumper selected to switch the output from 2 relay to 4
open collector output channels via the internal jumper.
Built-in COM1:RS232, COM2:RS232/RS485 port, Max
Speed up to 115200, COM driver support interrupt & 1K
QUEUE input buffer
Allows C programming which can be downloaded from
PC through COM1 via its in packed cable (CA-1509).
 Built-in watchdog timer for harsh environment. When
iVIEW-100 is power-up, the watchdog is enabled.
 Provides several solutions combined with our I-7188 and
I-8000 controller to control more DI/O even with different
protocol.
 Built-in power and RS-485 network protection circuit.
 Supports Real time clock with time & date. RTC leap year
compensation to 2079
 Supports user adding battery backup memory (S-256/
S-512) to retain more data.
 Connects up to 64 numbers of remote I/O modules, and
combines host PC, and power supply via its CA-1509
cable with one 5-wire RS-232 port, one RS-232/485
port, and one power connect line.
Special Features
 A wide temperature endurance ranged from -30℃ up to
+85℃ for the storage temperature, and from -25℃ up to
+75℃ for operating temperature.
 Equipped with a 64-bit unique hardware serial number,
each serial number is distinct and individual. The
application program can check this number for illegal
copies. It is a low cost protection mechanism.
 Provides particular C programming Libraries so that user
can easily call the functions to design their applications,
such as using LCD, keypad, R/W COM port, EEPROM,
RTC, I/O, FLASH memory, timer, watchdog, getting file
system & connecting to I-7000…
We are going to provide iVIEW-100E with a 10/100 mega Ethernet port for internet and intranet necessity. About the I/O Expansion
Board, if user has special requirement, customized I/O Expansion Boards can be ordered through ODM project.
Ordering Information
iVIEW-100-40
Handheld Controller, CPU:40MHz, Flash:512k, SRAM:512k
iVIEW-100E
Handheld Controller, CPU:40MHz, Flash:512k, SRAM:512k, Ethernet port:10/100m (available soon)
S-256 / S-512
256/512K battery backup SRAM Module
www.icpdas.com
Specifications of iVIEW-100-40
Power supply
Power requirements
10 to 30 VDC power
Power consumption
3.0 W
Protection
Built-in power protection and RS-485 network protection circuit
General environment
Operating temperature
-15°C to +60°C
Storage temperature
-35°C to +85°C
Humidity
5 to 90 %
System
CPU
80188, 40 MHz
SRAM
512K bytes
Flash Memory
512K bytes, Erase unit is 64K bytes, 100,000 erase/write cycles
OS
MiniOS7 of ICP DAS (64K bytes)
NVSRAM
31 bytes, battery backup, data valid up to 10 years
EEPROM
2048 bytes, data retention > 100 years. 1,000,000 erase/write cycles
Real time clock
Gives time(sec, min, hour) & date, leap year compensation from 1980 to 2079
Watchdog timer
Yes,
Serial ports
COM1
COM2
Ethernet
RS232 (5 pins): TXD,RXD,RTS,CTS,GND, Program download port.
Speed: 115200 bps max. Double buffer
RS232 (5 pins) / RS485 self-tuner, Speed: 115200 bps max.
RS232: TXD,RXD,RTS,CTS,GND,
RS485: Data+, Data10M/100M bps, provides in iVIEW-100E only
DIO channel
Input
4 digital input channels for 3.5V~30V
Output
2 relay outputs (default) for contact rating: 30 VDC/ 1A to 125 VDC/ 0.5A or
4 open collector outputs (jumper selected) for 30V / 100mA maxi load / per channel
HMI interface
LCD display
Keypad
buzzer
128x64dots, 16x8 character, text / BMP graphic, STN, yellow-green back light LCD, View
area: 72 X 40mm
Full numeric membrane keypad with number, character, direction, shift, enter, BS, ESC,
function keys
One internal buzzer
Development tool
C programming
Supports compilers TC 1.0~3.0/TC++ 1.0~3.0/BC 2.0/BC++ 3.1~5.02/MSC 8.00c/MSVC++
1.52. Provides C Lib functions for LCD, keypad, COM port, EEPROM, FLASH Memory,
timer, watchdog, I/O, NVRAM, RTC, getting file system, connecting to I-7000…
Program downloaded from PC via COM1
Protocols
Remote I/O
Supports I-7000 I/O modules & (I-87K base + I-87K serial I/O boards) as remote I/O.
Max. 64 remote I/O module for one controller
User defined protocol
User can write his own protocol applied at COM1, COM2
Battery backup SRAM
S-256 / S-512
Supports S-256:256K bytes and S-512:512K bytes optional battery backup SRAM for
retaining data
Case
Dimensions
181mm X 116mm X 42mm
Weight
550g (375g when cables not included)
www.icpdas.com