FreeNAS - Bug #487
Rocket 62X (620WDA) bundled with WD 2.5TB drives not working
06/30/2011 04:18 PM - Big Phil
Status:
Closed
Start date:
Priority:
Important
Due date:
Assignee:
% Done:
0%
Category:
Estimated time:
0.00 hour
Target version:
Seen in:
Hardware
Configuration:
ChangeLog Entry:
Migration Needed:
No
Description
[11:06] <BigPhil> hey there! I just installed freenas 8.0.1 on a usb stick. I'm having problem getting some drives to be recognized....
the drives not recognized are plugged on 2xRocket 62x PCI-E hubs that came with the 2.5TB Western DIgital drives I hooked in the
machine.
[11:08] <BigPhil> anyone knows how I can get the system to recognize those? they are recognized when booting in the boot menu,
when freenas boots as well it lists drives up to 9 (8x 2.5TB + CD + usb stick), but either from the web admin or when choosing where
to install, there are 4 drives missing
[11:19] <jpaetzel> [[BigPhil]]: are there 4 drives on a controller per chance?
[11:20] <BigPhil> @jpaetzel I have 2 x rocket62x cards, each of these cards have 2 sata connectors (so 2x2 drives=4)
[11:20] <@jpaetzel> you have 12 drives total, on two controllers, right?
[11:21] <@jpaetzel> so there are 4 drives on the mobo, and then 4 each on two pci-e controllers?
[11:21] <@jpaetzel> and the system is seeing 8 of the 12 drives.
[11:21] <@jpaetzel> is that correct?
[11:22] <BigPhil> I have a p5wdh motherboard from asus. first the 4x drives not recognized on the sata cards, then there's 3 drives
on the onboard intel sata, 1 on jmicron . then there's a pata CD and the USB key
[11:23] <BigPhil> so 2 x 2 drives on the sata cards, 4 on the mobo. the 4 mobo drives are recognized, not the 2x2 from the cards
[11:24] <BigPhil> this would be the card (seen in the review on this page : http://www.desktopreview.com/default.asp?newsID=1254 )
[11:28] <@jpaetzel> ok, so it looks like you need 3rd party drivers for them.
[11:34] <BigPhil> jpaetzel: that's what I thought that I needed some specific drivers but looking around, all I can seem to find is
highpoint-tech's site saying it should be supported natively in freebsd :/
[11:34] <@jpaetzel> [[BigPhil]]: I don't see any mention of a 62x on their site, is that a specific card, or just the last digit marked out?
[11:38] <BigPhil> jpaetzel: well it says 62x on the card, but on the back there's a sticker looks like the proper part number is rocket
620wda http://www.gamedude.com.au/prod_show.php?art_no=sataHProcket_62x
[11:39] <elr90> That explains the www-data part... So I change that to executer:executer on the nfs server ?
[11:41] <@jpaetzel> [[BigPhil]]: ok, can you capture a pciconf -lv from the CLI and create a ticket for this issue at
support.freenas.org? We'll have mav sort it out.
there you go!
freenas# pciconf lv
hostb0@pci0:0:0:0:
class=0x060000 card=0x81781043 chip=0x277c8086 rev=0xc0 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel 975X Express Chipset (82975X)'
class
= bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0:
class=0x060400 card=0x00008086 chip=0x277d8086 rev=0xc0 hdr=0x01
vendor = 'Intel Corporation'
device = '82975X PCIe Root Port'
class
= bridge
subclass = PCI-PCI
pcib2@pci0:0:28:0:
class=0x060400 card=0x81791043 chip=0x27d08086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class
= bridge
subclass = PCI-PCI
pcib3@pci0:0:28:2:
class=0x060400 card=0x81791043 chip=0x27d48086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
06/18/2017
1/4
class
= bridge
subclass = PCI-PCI
pcib4@pci0:0:28:3:
class=0x060400 card=0x81791043 chip=0x27d68086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class
= bridge
subclass = PCI-PCI
pcib5@pci0:0:28:4:
class=0x060400 card=0x81791043 chip=0x27e08086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801GR/GH/GHM (ICH7 Family) PCIe Root Port'
class
= bridge
subclass = PCI-PCI
pcib6@pci0:0:28:5:
class=0x060400 card=0x81791043 chip=0x27e28086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801GR/GH/GHM (ICH7 Family) PCIe Root Port'
class
= bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0:
class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class
= serial bus
subclass = USB
uhci1@pci0:0:29:1:
class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class
= serial bus
subclass = USB
uhci2@pci0:0:29:2:
class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class
= serial bus
subclass = USB
uhci3@pci0:0:29:3:
class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class
= serial bus
subclass = USB
ehci0@pci0:0:29:7:
class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class
= serial bus
subclass = USB
pcib7@pci0:0:30:0:
class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class
= bridge
subclass = PCI-PCI
isab0@pci0:0:31:0:
class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8 (945GL)'
class
= bridge
subclass = PCI-ISA
atapci1@pci0:0:31:1: class=0x01018a card=0x81791043 chip=0x27df8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class
= mass storage
subclass = ATA
atapci2@pci0:0:31:2: class=0x01018f card=0x26011043 chip=0x27c08086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
class
= mass storage
subclass = ATA
none0@pci0:0:31:3:
class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel[R] 82801G (ICH7 Family) C 27DA (82801G)'
class
= serial bus
subclass = SMBus
06/18/2017
2/4
vgapci0@pci0:7:0:0: class=0x030000 card=0x0003147b chip=0x5b601002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI RADEON X300/X550/X1050 Series (RV370)'
class
= display
subclass = VGA
vgapci1@pci0:7:0:1: class=0x038000 card=0x0002147b chip=0x5b701002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI RADEON X300/X550/X1050 Series Secondary (RV370)'
class
= display
ahci0@pci0:6:0:0:
class=0x010601 card=0x91251b4b chip=0x91251b4b rev=0x11 hdr=0x00
class
= mass storage
subclass = SATA
ahci1@pci0:5:0:0:
class=0x010601 card=0x91251b4b chip=0x91251b4b rev=0x11 hdr=0x00
class
= mass storage
subclass = SATA
mskc0@pci0:4:0:0:
class=0x020000 card=0x81421043 chip=0x436211ab rev=0x20 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = 'Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller (88E8053)'
class
= network
subclass = ethernet
mskc1@pci0:3:0:0:
class=0x020000 card=0x81421043 chip=0x436211ab rev=0x20 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = 'Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller (88E8053)'
class
= network
subclass = ethernet
atapci0@pci0:2:0:0: class=0x010185 card=0x81e41043 chip=0x2363197b rev=0x02 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'JMicron JMB362/JMB363 AHCI Controller (JMB36X)'
class
= mass storage
subclass = ATA
History
#1 - 06/30/2011 07:48 PM - Alexander Motin
Patch for this controller just committed to FreeBSD 9-CURRENT: http://svn.freebsd.org/changeset/base/223699 .
#2 - 06/30/2011 08:18 PM - Big Phil
ok thanks for the patch :)
I will be leaving the chat for the day, if possible I believe jpaetzel is supposed to send me a quick "walkthrough" on downloading the patch to freenas
and applying the patch. If I receive the info by tomorrow, when I get in the office I will apply the patch and follow up with you guys!
#3 - 07/06/2011 01:13 AM - Josh Paetzel
From the FreeNAS box, do the following:
# cd /tmp
# fetch http://download.freenas.org/ahci/i386/kernel.gz
Verify the checksum of the download:
# sha256 kernel.gz
SHA256 (kernel.gz) = 0cdc15dca8fd0b90c1f1239a7d5860328b612a9bd9a23902b0841f1e2fbf44c2
If that is the value you get, go ahead and install it:
# mount -uw /
# cp /tmp/kernel.gz /boot/kernel/
06/18/2017
3/4
# reboot
For amd64 arches replace the i386 with amd64
The checksum is:
SHA256 (kernel.gz) = 655af646a0ed18484e6e603a5db8c2d02fdf76f0e6a470f828b58bd60e8d43b3
#4 - 08/16/2011 04:46 AM - Xin Li
magnatique: did the proposed change solved your issue?
#5 - 08/16/2011 02:36 PM - Big Phil
yep works like a charm :D
#6 - 08/16/2011 02:37 PM - Big Phil
- Status changed from Unscreened to Closed
- Resolution set to fixed
06/18/2017
4/4