The mounting configuration for each array can be derived from a

VARIOUS PIR ARRAYS
The various Fresnel Technologies lens arrays shown in the accompanying data sheets are intended to be used in
passive infrared motion detector devices. They are optimized for dual-element pyroelectric detectors. They are
normally used with the grooved side facing the pyroelectric detector, and curved at a radius about the sensitive
area of the detector. The detector position should be as shown, and centered left-right (see Figures 1–9).
The overall dimensions of the arrays are as shown in the data sheets. Their usual thickness is 0.015” ± 0.004”
(0.38 mm ± 0.1 mm). Border width is also as shown in the figures. Centering is held to 0.015” (0.38 mm) in both
directions, except for the EWA 0.3 GI V1, where it is held to 0.005” (0.12 mm).
Fresnel Technologies, Inc. is the premier manufacturer of Fresnel lens arrays. We have led the industry in the
development of new lenses and materials to advance the state of the art of passive infrared motion detection.
Our lenses and lens arrays have been incorporated into most passive infrared devices using refractive optics
since 1976. Our quality standards are the highest in the industry. Surface finish and inclusions are such that no
defect is visible at a distance of 3 feet (1 meter) under ordinary light. There are no functional flaws in our products whatsoever. Our POLY IR® infrared-transmitting materials are the best available in stiffness and in transmittance in the 8 to 14 µm region. Active lens segments are made from our acclaimed and proprietary LODIFF®
lens patterns. Patents have been issued or are pending on several of the designs shown.
The various lens arrays shown in the data sheets are:
WIDE ANGLE ARRAYS
EXTRA WIDE ANGLE ARRAYS
WA 0.9 GI 6 V1
WA 0.9 GI 6 V2
WA 0.9 GI T1
WA 1.13 GO 14 V1
EWA 0.3 GI V1
EWA 0.53 GI V1
EWA 1.35 GI V1
ANIMAL ALLEY ARRAYS
AA 0.53 GI V1
AA 0.53 GI M1
AA 0.9 GI M1
PET IMMUNE ARRAY
WP 1.13 GI V1
WALL SWITCH ARRAY
WS 0.53 GI V1
CEILING MOUNT ARRAY
CM 1.0 GI T1
NEW!
The mounting configuration for each array can be derived from a combination of its name and its data sheet.
The first portion of the name (e.g. WA) denotes the classification of the array (in the case of WA, wide angle). The
second portion denotes the focal length (i.e., the distance from the lens array to the active elements of the pyroelectric detector). GI or GO indicates that the array is designed to be used with its grooves toward or away from
the detector, respectively. If there is a number after GI or GO, it indicates the number of degrees of downward
tilt. If there is no number in that position, the array is meant to be used with no tilt. The final portion is the “version” or “type” of the particular array within its classification and focal length. Each data sheet indicates the
vertical position of the centerline of the pyroelectric detector with respect to the lens array’s border, and also
shows the preferred mounting height and downward tilt.
The data sheets of Figures 1–14 illustrate the zone patterns for the arrays. The figures postulate a dual-element
detector with 110° coverage both up-down and left-right, amplifier gain of about 5,000, a mounting height of
3.3 feet (1 meter) for the animal alley lens array and the EWA 0.3 GI V1 and 6.8 feet (2.1 meters) for the others,
and downward tilts as shown in each array’s designation. CM 1.0 GI T1 is intended to be mounted on the ceiling, facing straight downward, at up to 49 feet (15 meters) from the floor. Other configurations (smooth side toward the detector, curved at other radii, tilted at other angles, etc.) can be used as well, but the zone patterns
illustrated in Figures 1–9 will not apply.
f
© Copyright Fresnel Technologies, Inc. 2009-16
www.fresneltech.com
161207
WIDE ANGLE ARRAY
WA 0.9 GI 6 V1
FRONT VIEW:
TOP VIEW:
10.1mm
(0.40in)
10m
(33ft)
29.2mm
(1.15in)
62.7mm
(2.47in)
5m
(16ft)
115°
0
5m
(16ft)
10m
(33ft)
SIDE VIEW:
2.1m
(6.8ft)
1.4m
(5ft)
4.1m
(14ft)
10.5m
(34ft)
Figure 1
fresnel technologies inc. 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
1991
WIDE ANGLE ARRAY
WA 0.9 GI 6 V2
FRONT VIEW:
10.1mm
(0.40in)
TOP VIEW:
10m
(33ft)
29.2mm
(1.15in)
62.7mm
(2.47in)
5m
(16ft)
0
136°
5m
(16ft)
10m
(33ft)
SIDE VIEW:
2.1m
(6.8ft)
1.4m
(5ft)
4.1m
(14ft)
10.5m
(34ft)
Figure 2
fresnel technologies inc. 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
1991
WIDE ANGLE ARRAY
WA 0.9 GI T1
FRONT VIEW:
TOP VIEW:
16.4mm
(0.65in)
15m
(49ft)
42mm
(1.65in)
10m
(33ft)
62mm
(2.44in)
5.0m
(16ft)
104°
0
5m
(16ft)
10m
(33ft)
15m
(49ft)
SIDE VIEW:
2.1m
(6.8ft)
(4.5ft)
3.3m
(11ft)
7.3m
(24ft)
20m
(66ft)
Figure 3
fresnel technologies inc. 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
1991
WIDE ANGLE ARRAY
WA 1.13 GO 14 V1
FRONT VIEW:
TOP VIEW:
22.4mm
(0.88in)
15m
(49ft)
44.7mm
(1.76in)
10m
(33ft)
56.4mm
(2.22in)
5m
(16ft)
86.5°
0
5m
(16ft)
10m
(33ft)
15m
(49ft)
SIDE VIEW:
2.1m
(6.8ft)
2m
(7ft)
5.2m
(17ft)
20m
(66ft)
Figure 4
fresnel technologies inc. 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
1991
EXTRA WIDE ANGLE ARRAY
EWA 0.3 GI V1
1.0"
(25.4mm)
.30"
(7.6mm)
TOP VIEW:
4.6 m
FRONT VIEW:
.34"
(8.6mm)
.925"
(23.5mm)
Note: Lensed area is 0.300" x 0.885"
Maximum die-cut size is 0.635"
x 1.220"
TOP VIEW:
144°
4.6 m
30°
SIDE VIEW:
4.6m
fresnel technologies inc.
1996
Figure 5
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
EXTRA WIDE ANGLE ARRAY
EWA 0.53 GI V1
FRONT VIEW:
11.2mm
(0.44in)
22.4mm
(0.88in)
TOP VIEW:
9m
(30ft)
52.1mm
(2.05in)
TOP VIEW:
4.5m
(15ft)
13.5mm
(0.53in)
0.7in R
177°
4.5m
(15ft)
9m
(30ft)
SIDE VIEW:
1m
(3.3ft)
1.5m
(5ft)
fresnel technologies inc.
2003
9m
(30ft)
Figure 6
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
EWA 1.35 GI V1
"Beam" diagram
TOP VIEW:
9m
(30 ft)
6m
(20 ft)
0
6m
(20 ft)
9m
(30 ft)
SIDE VIEW:
3m
(10 ft)
Note: 200° "beams" shown as if along pattern centerline
in side view
0
3m
(10 ft)
6m
(20 ft)
9m
(30 ft)
12m
(40 ft)
15 m
(50 ft)
Figure 7
fresnel technologies inc.
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
2000
Drawn By: Brian Dow
EWA 1.35 GI V1
Mounting details
Upper Array
C
L
(GROOVED SIDE)
39mm
37.5mm
36mm
27mm
26mm
22.5mm
20mm
26.5mm
20mm
1.25mm
FOLDING LINE x2
TOP
13mm
Detector
Centerline
15mm
18mm
16.5mm
CL
1.5mm dia.
1.5mm
Lower Array
C
L
(GROOVED SIDE)
TOP
5mm
Detector
Centerline
6.5mm
8mm
C
L
19mm
16.3mm
13.8mm
13.8mm
22mm
Scale:1 to 1
Figure 8
fresnel technologies inc.
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
2000
Drawn By: Brian Dow
EWA 1.35 GI V1
Detector location
SIDE VIEW:
FRONT VIEW:
Upper Array
Upper Array
20°
13mm
25mm
Lower Array
Lower Array
TOP VIEW:
3mm R
Upper Array
150mm R
FTI USA
Lower Array
Scale:1 to 1
Figure 9
fresnel technologies inc.
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
2000
Drawn By: Brian Dow
ANIMAL ALLEY ARRAY
AA 0.53 GI V1
TOP VIEW:
FRONT VIEW:
8m
(26ft)
15.2mm
(0.6in)
28.5mm
(1.12in)
38.3mm
(1.51in)
4m
(13ft)
0
101°
4m
(13ft)
8m
(26ft)
SIDE VIEW:
1.0m
(3.3ft)
10m
(33ft)
Figure 10
fresnel technologies inc. 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
1991
ANIMAL ALLEY ARRAY
AA 0.53 GI M1
FRONT VIEW:
(15mm)
(0.59in)
TOP VIEW:
(28.2mm)
(1.11in)
12m
(40ft)
(48.3mm)
(1.9in)
TOP VIEW:
6m
(20ft)
13.5mm
(0.53in)
0.53in R
125°
6m
(20ft)
16°
12m
(40ft)
SIDE VIEW:
1m
(3.3ft)
12m
(40ft)
fresnel technologies inc.
2003
Figure 11
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
ANIMAL ALLEY ARRAY
AA 0.9 GI M1
FRONT VIEW:
23.9mm
(0.94 in)
TOP VIEW:
45.7mm
(1.8 in)
15m
(50ft)
76.2 mm
(3 in)
TOP VIEW:
7.5m
(25ft)
22.9mm
(0.9 in)
0.9 R
125°
7.5 m
(25ft)
15m
(50ft)
SIDE VIEW:
1m
(3.3ft)
15 m
(50ft)
fresnel technologies inc.
2003
Figure 12
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
PET IMMUNE ARRAY
WP1.13GIV1
FRONT VIEW:
14mm
17mm
(0.67 in) (0.55 in)
TOP VIEW:
44mm
(1.73 in)
30m
(98ft)
57mm
(2.24 in)
20m
(66ft)
TOP VIEW:
10m
(33ft)
28.7mm
(1.13 in)
100°
0
28.7mm R
(1.13 in)
10m
(33ft)
20m
(66ft)
30m
(98ft)
SIDE VIEW:
2.1m
(6.8ft)
2m
(6.6ft)
12m 15m
(39ft) (49ft)
fresnel technologies inc.
2003
30m
(98ft)
Figure 13
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
WALL SWITCH ARRAY
WS 0.53 GI V1
FRONT VIEW:
TOP VIEW:
9.5mm
(0.37in)
24.6mm
(0.97in)
10m
(32ft)
42mm
(1.65in)
TOP VIEW:
5m
(16ft)
13.5mm
(0.53in)
0.53in R
184°
5m
(16ft)
10m
(32ft)
SIDE VIEW:
2.1m
(6.8ft)
2m
(7ft)
fresnel technologies inc.
2004
4.5m
(14ft)
10m
(32ft)
Figure 14
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
0m
CEILING MOUNT ARRAY
CM 1.0 GI T1
( FLOOR PATTERN FOR QUAD ELEMENT DETECTOR)
FRONT VIEW:
TOP VIEW:
10m
(33ft)
1.03in R
5m
(16ft)
SIDE VIEW:
0
25.4mm
(1in)
5m
(16ft)
10m
(33ft)
SIDE VIEW:
15m
(49ft)
0m
9m
(29.5ft)
5.9m
(19ft)
fresnel technologies inc.
2008
2.3m
(7.5ft)
0
2.3m
(7.5ft)
5.9m
(19ft)
9m
(29.5ft)
Figure 15
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817)926-7146
ju