Schedule of Accreditation
issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
British Inspecting Engineers Ltd
Issue No: 020
0036
Type A
Inspection Body
Issue date: 27 Septemebr 2016
Chatsworth Technology Park
Contact: Mr M Watson
Dunston Road
Tel: +44 (0)1246 263861
Chesterfield
Fax: +44 (0)1246 260919
Derbyshire
E-Mail: [email protected]
S41 8XA
Website: www.biegroup.com
Accredited to
ISO/IEC 17020:2012
Inspection performed at/from the above address only
DETAIL OF ACCREDITATION
Field of Inspection
The Carriage of Dangerous Goods
and Use of Transportable Pressure
Equipment Regulations 2009 (as
amended):
Transportable Pressure
Receptacles *
Type and Range of Inspection
Periodic in-service Inspection
including:
Periodic inspection, intermediate
inspection, and exceptional checks.
Surveillance of applicant’s in-house
inspection service.
Periodic in-service Inspection
including:
Methods and Procedures
Article 12 of the Directive
2010/35/EU + 1.8.7 of the Annexes
to 2008/68/EC:
Seamless Steel Cylinders
BS EN 1968:2002 + A1:2005
(except Annex B).
Seamless Aluminium Alloy
Cylinders
BS EN 1802:2002
(except Annex B).
Welded Carbon Steel Cylinders
BS EN 1803:2002
(except Annex B).
Cylinder Bundles
BS EN 15888:2014
Periodic inspection, intermediate
inspection, and exceptional checks.
The Carriage of Dangerous Goods
and Use of Transportable Pressure
Equipment Regulations 2009 (as
amended):
Old Pressure Receptacles *
Assessment Manager: EG
Periodic in-service Inspection
Seamless Steel Cylinders
BS EN 1968:2002 + A1:2005
(except Annex B).
Seamless Aluminium Alloy
Cylinders
BS EN 1802:2002
(except Annex B).
Welded Carbon Steel Cylinders
BS EN 1803:2002
(except Annex B).
Welded Aluminium.
Cylinder Bundles
BS EN 15888:2014
Page 1 of 3
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Stai nes -upon-Tham es, TW 18 3HR, UK
0036
Type A
Inspection Body
British Inspecting Engineers Ltd
Issue No: 020
Issue date: 27 September 2016
Accredited to
ISO/IEC 17020:2012
Inspection performed at/from main address only
Field of Inspection
Type and Range of Inspection
Methods and Procedures
The Carriage of Dangerous Goods
and Use of Transportable Pressure
Equipment Regulations 2009 (as
amended):
Conformity assessment including:
Type approval.
Supervision of manufacture.
Initial inspection and test
Periodic inspection, intermediate
inspection, and exceptional check.
Surveillance of applicant’s in-house
inspection service.
Article 12 of the Directive
2010/35/EU + 1.8.7 of the Annexes
to 2008/68/EC:
Reassessment of conformity
Article 13 + Annex III of the
Directive 2010/35/EU:
Transportable Pressure
Receptacles *
The Carriage of Dangerous Goods
and Use of Transportable Pressure
Equipment Regulations 2009 (as
amended)
84/525/EEC (Annex 1 Parts 1 to 3)
84/526/EEC (Annex 1 Parts 1 to 3)
Transportable Pressure
Receptacles *
Pressure Receptacles
84/525/EEC (Annex 1 Parts 1 to 3)
84/526/EEC (Annex 1 Parts 1 to 3)
EN 1964-1:1999
EN 1964-2:2001
EN 1975:1999/A1:2003
EN ISO 11120:1999
ISO 9809-1:1999
ISO 9809-2:2000
ISO 9809-3:2000
ISO 7866:1999
ISO 11118:1999
EN 1964-2:2001
EN 1975:1999/A1:2003
EN ISO 11120:1999/A1:2013
New construction verification
EN ISO 11120:2015
Note: The inspection of items marked thus * subject to legislative requirements including the appointment
of ‘persons’ to carry out inspections. Reference should be made to the VCA Dangerous Goods Office for
information on this and listings of bodies recognised under UK legislation.
END
Assessment Manager: EG
Page 2 of 3
S c he dul e of Ac c r e di ta ti on
issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Stai nes -upon-Tham es, TW 18 3HR, UK
0036
British Inspecting Engineers Ltd
Type A
Inspection Body
Issue No: 020
Issue date: 27 September 2016
Accredited to
ISO/IEC 17020:2012
Inspection performed at/from main address only
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant
requirements of EN ISO/IEC 17020
Directive/Regulation
Pressure Equipment
Directive 97/32/EC
implemented by;
Pressure Equipment
Regulations
1999 (SI 2001)
Pressure Equipment
Directive 2014/68/EU
implemented by;
Statutory Instrument
Pending
Methods / Procedures
Essential
requirements:
Product specification/
Properties / Standards
Conformity Assessment
procedure/Module/Article
Category of products or
individual products
Directive: Article 10:Annex III
Regulation: 12 - Schedule 4
Pressure equipment and
assemblies except for
directly fired equipment
and portable fire
extinguishers
Notified Body
Procedures:
PED series
Directive: Article 11
Regulation: 17 - Schedule 7
Issuing European
Approval of Materials
Notified Body
Procedures:
PED series
Directive: Article 14:Annex III
Regulation: TBA
All descriptions of
pressure equipment and
assemblies covered by
the Regulations.
Notified Body
Procedures:
PED series
Issuing European
Approval of Materials
Notified Body
Procedures:
PED series
Conformity Assessment Modules
A1, B, B1, C1, D, D1, E, E1, F, G,
H, H1
Conformity Assessment Modules
A2, B, C2, D, D1, E, E1, F, G, H,
H1
Directive: Article 15
Regulation: TBA
Note: The inspection of items above are subject to legislative requirements including the appointment of
bodies’ to carry out conformity assessment. Reference should be made to the relevant Government
Departments BIS for information on this and listings of bodies recognised under UK legislation
END
Assessment Manager: EG
Page 3 of 3