SUBMITTAL
TYPE: Chemical Pot Feeder Tanks
MODELS: CPFT-Series
Submittal Sheet No. C-3804
JOB
Date: 12-06
Wessels Representative _____________
_________________________________
_________________________________
Unit Tag No. ________________________
Order No. _____________ Date _______
Engineer ___________________________
Submitted By __________ Date _______
Contractor __________________________
Approved By ___________ Date _______
DESCRIPTION
CONSTRUCTION
Wessels by-pass chemical feed tanks are
designed for reliable induction of chemical
treatment into a closed loop system. Typically
used in hydronic and process piping systems.
Fabricated Steel
Exterior primer painted
PERFORMANCE LIMITATIONS
Maximum Design Temperature: 450ºF
Maximum Design Pressure: 200 PSI
Model
Part No.
Gal.
CPFT-2
CPFT-5
78880002
78880005
2
5
A
B
6
10
19-7/8
19-3/4
Dimensions (inches)
C
D
16-3/4
14-1/2
3-1/4
5-1/2
E
F
8
12
3/4
3/4
Weight
(Lbs.)
30
37
TYPICAL SPECIFICATION
Furnish and install as shown on plans, a Chemical Pot Feeder Tank as manufactured by Wessels
Company. The tank shall incorporate a chemical fill basin with a minimum dimension of 6” to help facilitate
complete introduction of required solutions. The tank and shall be constructed for 200 PSI working
pressure @ 450°F. Each Chemical Pot Feeder Tank shall be Wessels Model CPFT- __________ or
approved equal.
101 TANK ST ● GREENWOOD, IN 46143 ● (317) 888-9800 ● (317) 888-9988 FAX ● www.westank.com