Knapsack and compression sprayer Nozzle Selection Guide Polijet 55-130° Deflector: Designed for Knapsacks. Choice of swath widths. Low drift non-blocking characteristics Full Cone: Designed for knapsacks. Excellent foliar coverage, for spot treatment of weeds with herbicides 1 – 5 Bar 1 – 3 Bar Deflectip 80-125° Deflector: Wide angled even spray with coarse droplets. Ideal for lower volume spraying with herbicides. 1 – 5 Bar FCX Full Cone 80° Evenspray 80° Flat Fan: Distributes a flat fan with uniform med/fine spray evenly across the swath. Ideal for all targets. 2 – 4 Bar Hypro EU Ltd, Station road, Longstanton, Cambridge, UK, CB24 5DS. Tel: 01954 260097. Fax 01954 260245. www.hypro-eu.com HCX Hollow Cone 80° Hollow Cone: Produces finely atomised droplets. Suitable for good foliar coverage with insecticides and fungicides 3 – 6 Bar Knapsack nozzle Kits To allow a choice of nozzles. Contains a HCX hollow cone, FCX full cone, and Deflectip nozzles and 100# filter 1 – 5 Bar Precision Fluid Delivery Technology PoliJet 55° - 130° • Small nozzle sizes specifically designed to apply medium/coarse spray quality at knapsack application speeds. • 4 different spray angles for swath widths of 0.5-2m at 0.5m nozzle height. Each applying the same application rate. • Large circular orifice eliminates chances of blocking. Type: Deflector Angles: 55° - 130° Spray quality: Med/Coarse, low drift Pressure: 1-3 bar Precision Fluid Delivery Technology Full Cone (FCX) 80° • Designed for spot applications using knapsack and compression sprayers. • Produces full cone pattern to give comprehensive coverage. • 80 degree spray angle makes it easy to direct for spot applications. • Two piece construction separates easily for cleaning Type: Full cone Angle: 80° Spray quality: Med Pressure: 1-5 bar Precision Fluid Delivery Technology Hollow Cone (HCX) 80° • Can be used as a band spray and with knapsacks. • Finely atomised spray droplets, ideal for foliar coverage of insecticides and fungicides. Precision Fluid Delivery Technology Type: Hollow cone Angle: 80° Spray quality: Fine Pressure: 3-6 bar DeflecTip 80° - 125° • Smaller sizes recommended for Knapsacks. • Variable spray swath widths available • Large orifice produces coarser droplets less prone to drift Nozzle DT0.5 DT0.75 DT1.0 DT1.5 DT2.0 Pressure Flow Bar L/min Spray Angle Spray Width (m)* 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 0.23 0.32 0.39 0.34 0.48 0.59 0.46 0.64 0.79 0.68 0.97 1.18 0.91 1.29 1.58 80 80 80 95 95 95 105 105 105 105 105 105 105 105 105 0.84 0.84 0.84 1.09 1.09 1.09 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 Litres/hectare @ Km/h 2 81 115 141 94 133 163 105 148 182 157 223 273 210 297 364 3 54 77 94 63 89 109 70 99 121 105 148 182 140 198 242 Precision Fluid Delivery Technology 4 41 58 71 47 66 81 52 74 91 79 111 136 105 148 182 5 33 46 56 38 53 65 42 59 73 63 89 109 84 119 145 Nozzle DT2.5 DT3.0 DT4.0 DT5.0 Type: Deflector Angle: 80° - 125° Spray quality: Med Pressure: 1-5 bar Pressure Flow Bar L/min Spray Angle Spray Width (m)* 1 2 3 1 2 3 1 2 3 1 2 3 1.14 1.61 1.97 1.37 1.93 2.37 1.82 2.58 3.16 2.28 3.22 3.95 110 110 110 110 110 110 120 120 120 125 125 125 1.43 1.43 1.43 1.43 1.43 1.43 1.73 1.73 1.73 1.92 1.92 1.92 At 50 cm nozzle height Litres/hectare @ Km/h 2 239 339 415 287 406 498 316 447 547 356 503 617 3 160 226 276 192 271 332 211 298 365 237 336 411 4 120 169 207 144 203 249 158 223 274 178 252 308 5 96 135 166 115 163 199 126 179 219 142 201 247 EvenSpray 80° • Suitable for knapsack applications of most products. • Uniform distribution across the spray width ensuring targets receive an even application of chemical. • Mixed droplet spectrum for effective delivery and retention of agrochemicals. Precision Fluid Delivery Technology Type: Flat fan Angle: 80° Spray quality: Med Pressure: 2-4 bar Knapsack calibration • Where nozzles are specifically designed for knapsack spraying (e.g. Polijet, DeflecTip and FCX), the speeds given in the charts are walking speeds. • For other nozzles the Flow rate or Application rate can be calculated using the following formulae: Flow rate = L/min (Application rate (l/ha) x Speed (km/h x Swath width* (m)) ÷ 600 Application rate L/Ha = 60,000 x Flow Rate (l/min) Speed (km/h) x Swath width* (m ) x 100 * At 50 cm nozzle height above ground Precision Fluid Delivery Technology
© Copyright 2024 Paperzz