build
you can
r
upon ou
s!
product
portrait
Our company is a leading manufacturer and supplier of snake spacers in Germany, Austria and other
European Union countries.
In over thirty years we specialized
on this product. Our know-how
ensures maximum safety and quality.
From 1981 to 1989
our company produced the UTH snake spacers
for the company Eisen-Uth on a special machine
that was designed and constructed in-house.
It was the first production of this type of
spacers in Germany.
In 1990
we took over the production and distribution
of the UTH-spacers.
In 1995
a new production facility was erected.
In 2005
the production of the Aaron snake spacers
was started.
Years of experience as well as constant development and improvement in the production
of spacers has lead to a continuous increase
of the production volume.
history
Production
Construction
Stock and delivery
Pallets
We produce snake spacers from
rolled wire coils with wire cold
rolling mills and welding machines.
We guarantee a short delivery time
from a well-assorted stock and with
selected forwarding agencies.
The pallets are divided into units
of 25 pieces.
we offer two types of snake spacers:
200 cm
HEIGHT
2-11 cm
200 cm
HEIGHT
3-40 cm
20 cm
20 cm
UTH
Aaron
snake spacers
snake spacers
length 200 cm · width 20 cm
height 2 - 11 cm
length 200 cm · width 20 cm
height 3 - 40 cm
Our UTH spacers are accredited
Europe-wide. The internal quality
control is subject to high quality
criteria that fulfill international re-
Our Aaron spacers are externally
tested and certified according to
the requirements of the »DBVMerkblatt Unterstützungen« cited
quirements.
in DIN 1045 and Eurocode 2.
products
product
information
The spacers are used to fix the
position of the upper reinforcement
layer, the distance to the lower one
and the concrete cover thickness.
The spacers can also be used to define the distance of two reinforcement layers in walls.
The spacing depends on the type of
the reinforcement. Typically 50 to
70 cm can be assumed.
Please follow the instructions of the
structural engineer.
B
A
D
D
F
C
E
position of snake spacer
Usually the spacers are arranged
The spacers withstand the weight
A
snake spacer
linearly and need to be sufficiently
of the common reinforcement and
temporarily an additional usual
B
UPPER REINFORCEMENT
fixed to keep the reinforcement in
its planned position.
load during the construction work.
C
LOWER REINFORCEMENT
Exceeding point loads caused by
D
SPACER
reinforcement steel mesh rolls,
E
FORMWORK / BLINDING CONCRETE
charging buckets and similar loads
F
NO CONTACT BETWEEN C AND E
must be avoided without additional
support.
ideenreich.co.at
J. Häuslschmid Gmbh
Mayerhofen 2
T + 49 8683 / 89 70 0
[email protected]
84529 Tittmoning
F + 49 8683 / 89 70 50
www.haeuslschmid.de
Germany