SIPOS 5 Flash/HiMod
Recommended spare parts and
often used accessories
Electric Actuators
 Rotary Actuators 2SA5
 Linear Actuators 2SB5
 Part-turn Actuators 2SC5 and 2SG5
for types
2S 5
Issue 07.17
Subject to changes without notice!
-
-
3
4
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Base order No.
1)
(2SY5 + part No.)
Explosion views
Short description
see attachment...
part No.
8 years
Recommended spare parts
2 years /
commissioning
Suggested minimum
quantity
for spare parts for
operating time [%]
Delivery
period
Spare part definition
+ detailed description
[weeks]
Page
Electronics
....001-.....-....
Electronics unit
f, g, i, k
5
10
4
3-5
....041-.....
Electronics housing cover
f, g, i, k
2
2
2
6
....055-.....
PC board plugs
f, g, i, k
5
2
7
a, b
2
4
8-9
2
9
Mechanical
....216-…..
....218-…..
Output shaft insert A
Gasket set for commissioning
all depictions
Gasket set, complete
5
10
-
-
50
....220-.....
Signaling gear, complete
a, b, c, d, e
5
15
2
10
....225-…..
Cover for position recording
a, b, c, d, e, p
5
5
2
11
....250-.....
Hand manual
a, b, c, d, e, p
5
5
4
12
....252-.....
Handle / hand crank / hand wheel
a, b, c, d, e, p
5
5
2
13
Often used accessories
Delivery
period
Order No.
Short description
Detailed description
[week]
COM-SIPOS PC parameterization program
2SX5100-3PC02
1
Parking socket
2SX5303-0PS01
2
14
Separate mounting
2SX5300-. GA . .
4
15
Attachments
f,g
(explosion views)
i,k
a
Electronics
Mechanical
14

ECOTRON
- Connections, housings, control electronics
16

PROFITRON/HiMod
- Connections, housings, control electronics
17

Rotary actuator
- 2SA5 . 1/2/3/4.-
18
b
- 2SA5 . 5/6/7/8.-
19
- 2SB5 . 1/2/3/4.-
20

Linear actuator
- 2SB5 . 5/6.-
21
p

small Part-turn actuator
- 2SG5 . . .-
22
e

Part-turn actuator
- 2SC5 . . .-
23
c
d
1)
Page
Numbers printed in bold are part Nos. of the explosion views!
Page 2
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Electronics
2SY5001-
Electronics unit
Version:
silver-gray coating (similar RAL7037), completely assembled, including mounting parts for mounting to the
actuator's gear unit and mounting instruction.
Connection openings are covered for transport/stocks.
(including the parts 010 – 016, 034, 035, 041 and 042 that are used depending on the version).
Notes:
- Electronics units are function-tested and are documented with a separate serial number and
order number (2SY5...-) and are specified on a neutral rating plate. A wiring diagram is included.
- Current data such as the number of elapsed hours of the motor cannot be imported from the original
electronics unit. Wherever applicable, maintenance intervals must be reparameterized.
Definition:
see below!
Identical electronics unit:
Determining spare parts with importing of all actuator-specific data in the EEPROM by the supplier.
(Electronics unit can only be used for absolutely identical actuator versions, e.g. rotary actuators with 37-125Nm and 5-40 rpm.)
Example: supplied type
2 S A 5 0 3 1 - 2 C D 0 0 - 3 A B 3
A→0
B→1
C→2
G→3
Identical electronics unit
B→B
D→D
E → S 1)
E → T 1)
J→J
2 S Y 5 0 0 1 - 0 C D 3 0 - 3 A B 3
bold = relevant data positions
B
D
S (small electronics unit resp. motor up to1.5 kW)
T (big electronics unit resp. motor 3 or 5.5 kW)
J
bold = shifted data positions
Actuator-neutral electronics unit:
Determining spare parts exclusively taking into account the data relevant to the version
(Electronics unit largely actuator-neutral. Actuator type, torques or cut-off forces and speed, output speed or positioning time are reimported
from the old unit via the serial interface using the PC parameterization program COM-SIPOS, Order No. 2SX5100-3PC02 and are placed
in the replacement unit's EEPROM.)
Example: supplied type
2 S C 5 5 4 5 - 1 C E 1 7 - 4 DG 4
B→B
D→D
E → S 1)
E → T 1)
J→J
Actuator-neutral electronics unit
Note:
2 S Y 5 0 0 1 - 5 P S 0 0 - 4 DG 4
bold = relevant data positions
B
D
S (small electronics unit resp. motor up to 1.5 kW)
T (big electronics unit resp. motor 3 or 5.5 kW)
J
bold = shifted data positions
The actuator-neutral electronics unit for modulating actuators 2S.55..- can also be used for standard actuators 2S.50!
The actuator-neutral electronics unit for continuous modulating actuators 2S.58..- can also be used for modulating actuators
2S.55 and for standard actuators 2S.50!
1) electronics unit for 3 phase power supply
Version
Actuator types
small electronics unit „S“
2SA501., 2SA502., 2SA503., 2SA504.-.C, 2SA551., 2SA552., 2SA553., 2SA554.-.C, 2SB551., 2SB552., 2SB553., 2SB554., 2SC5... and 2SG5...;
HiMod: 2SA581., 2SA582., 2SA583., 2SA584.-.C, 2SB581., 2SB582., 2SB583. and 2SB584.
big electronics unit „T“
2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.;
HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586.
Y070.085/EN
Page 3
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5001 -
-
Electronics unit
0
5
8
for standard 2S.50
for modulating duty 2S.55
for HiMod 2S.58
List price
(actuator-neutral version can also be used for 2S.50)
(actuator-neutral version can also be used for 2S.55 and 2S.50)
add. cost
Rotary actuators 2SA5
A
B
C
D
E
P
*)
B
D
J
S
T
Linear actuators 2SB5
1,25 – 10 rpm
2,5 – 20 rpm
5 – 40 rpm
25-320 mm/min
160 –8 resp. 80-10 sec/90°
10 – 80 rpm
20 – 160 rpm
actuator-neutral  requires “0” in 11th and 12th place of order No.
without
1x AC 110-115 V
1x AC 220-230 V
3x AC 190-200 V
3x AC 380-460 V
without
small electronics unit (motor up to 1.5 kW)
big electronics unit (motor 3 or 5.5 kW)
Rotary actuators 2SA5
*)
*)
0
1
2
3
4
5
6
7
8
2SA5.1.
2SA5.2.
2SA5.3.
2SA5.4.
2SA5.5.
2SA5.6.
2SA5.7.
2SA5.8.
3
4
A
B
C
D
E
F
G
H
J
K
L
A
B
2SB5.1.
2SB5.2.
2SB5.3.
2SB5.4.
2SB5.5.
2SB5.6.
Part-turn actuators 2SC5 resp. 2SG5
2SC5.0.
2SC5.1.
2SC5.2.
2SC5.3.
2SC5.4.
2SC5.5.
2SC5.6.
2SG5.0.
2SG5.1.
2SG5.2.
D
E
F
G
H
J
K
L
3
4
without
actuator-neutral resp. for rotary actuator 2SA5
for linear actuator 2SB5
for part-turn actuator 2SC5
for small part-turn actuator 2SG5
without
Control electronics ECOTRON
Control electronics PROFITRON/HiMod
without
without add-ons for electronics unit
Relay board
PROFIBUS DP with V1 and V2 services (V2 services only with PROFITRON/HiMod) - 1-channel
PROFIBUS DP with V1 and V2 services (only with PROFITRON/HiMod) - 2-channel
MODBUS RTU - 1-channel
MODBUS RTU - 2-channel (only with PROFITRON/HiMod)
PROFIBUS DP - 1-channel, Micromaster compatible (incl. part 033)
PROFIBUS DP - 2-channel, Micromaster compatible (incl. part 033)
for HART
for HART + relay board
for HART with parameterization
without
standard software-function
Positioner
without
for standard (only PROFITRON)
for modul. duty (only PROFITRON)
for HiMod
Process controller
for modul. duty (only PROFITRON)
for HiMod
travel dependent output speed adjustment (only PROFITRON)
Positioner + travel dependent output speed adjustment for modul. duty (only PROFITRON)
for HiMod
external analog output speed setpoint (only PROFITRON)
Positioner + external analog output speed setpoint
for modul. duty (only PROFITRON)
for HiMod
Positioner with proportional control / split-range functionality for modul. duty (only PROFITRON)
for HiMod
travel dependent freely adjustable positioning times (only PROFITRON)
Positioner + travel dependent freely adjustable
for modul. duty (only PROFITRON)
positioning times
for HiMod
Process controller + travel dependent freely adjustable
for modul. duty (only PROFITRON)
positioning times
for HiMod
C
*)
Linear actuators 2SB5
actuator-neutral resp.
0
1
2
3
Part-turn actuators 2SC5 resp. 2SG5
for direct connection
for round plug / field bus interface resp. for electrical isolation of analog signals
without
without
without
without
Differentiation only necessary if the data is not read out of the EEPROM of the old unit with the PC parameterization program COM-SIPOS (Order No. 2SX5100-3PC02) via the
serial interface RS 232 or Bluetooth resp. the fieldbus interface RS 485 (a change of the actuator type as also of the factory parameters is not possible via fieldbus) and is read into the
replacement electronics. Actuator-neutral electronics unit: 2SY5001-.P.00-....
Page 4
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Additional features for electronics unit 2SY5001-… (add. "-Z" to order No.)
add. cost
add. features
ECOTRON
PROFITRON
Setting/programming
Customer plate
Language for rating plate
SIPOS 5 Micromaster
(delivered until 2001)
Other
M
S
M
P
P
S
K
V
Y
Y
Y
Y
1
2
1
4
4
3
7
5
0
1
3
.
8
1
8
1
2
8
0
0
5
1
3
.
Y 9 9
B 0 0
B . .
S 3 1
P 1 5
C2 1
C5 0
C5 1
C
C
C
C
C
E
E
K
6
6
6
6
6
2
2
5
0
1
2
3
9
1
3
1
P 4 0
S 6 0
S 6 1
T 0 6
special wiring diagram
(only applicable for the
customer connection)
Finish paint
C
D
L
L
L
Y
.
.
3
3
3
3
.
.
0
2
8
5
Automatic motor stop period heater
Analog actual position value 4-20mA (only standard version)
Automatic motor stop period heater
prepared for „non-intrusive
Control PC board prepared for „non-intrusive“ (only in combination with „S31“)
prepared for external COM-SIPOS interface
for modulating duty with reduced cycles S4/S5 (only standard version)
Test to IEC 61800-2
Torque dependent cut-off in end position:
Parameterization to customer requirement  specify serial number!
Binary and analog inputs freely usable via fieldbus
project dependent parameterization:
Y12, Y14, Y15, Y17, Y19, Y50, Y90
Customer specific software-programming
with freely definable text
Rating-plate foreign-language/English:
AR (B65), CS (B55), DA (B62), EL (B60), EN (B49), ES (B51), FI (B54), FR (B50),
IT (B52), PL (B57), PT (B64), RO (B59), RU (B53), SK (B61), SV (B56), TR (B63),
ZH (B58)
Connection electronics unit to gear unit acc. to SIPOS 5 Micromaster
Connection with PG-threads (only applicable for PROFIBUS connection)
special plug connection with view glass,
without
without
without
on request
without
without
with „C10“
with „C11“
Bluetooth interface
PROFITRON
(Cover made of Macrolon)
HiMod (instead of external COM-SIPOS interface!)
Bluetooth interface
PROFITRON
(Cover made of metal)
HiMod (instead of external COM-SIPOS interface!)
Binary inputs OPEN/CLOSE for 120 V AC
Parameterization for project Lünen with signaling output 1 via relay
Binary inputs OPEN/CLOSE/STOP/EMERGENCY for 230 V AC (external power supply)
Binary inputs OPEN/CLOSE for 120 V AC (internal power supply)
Protective circuit for position feedback (V58) removed from the control board
Version with safety relay
Space heater for electronics unit - India
Protection class IP 68
for ECOTRON and PROFITRON
with „L38“
for HiMod
prepared for magnetic position sensor
Local controls without bush buttons
Electronics housing cover
small electronics unit (motor up to 1.5 kW)
made of metal
big electronics unit (Motor 3 or 5.5 kW)
Temperature range -30°C to +60°C
project dependent wiring diagram:
C10, C11, C15, C16, C17, C18, C23, C25,
D00, D01, D02, D03, D04, D05
unpainted
Double thick-film paint 150 µm (instead of 80 µm)
Very high corrosion protection, corrosivity category C5 with long protection time
Top coat of paint for colors other than RAL7037:  specify required color!
Σ List price = List price + Σ add. cost
Electronics unit
Y070.085/EN
without
without
without
without
without
without
.......... [...]
(Stell-E001)
Page 5
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5041 -
List price
Electronics housing cover
(silver-gray coating (similar RAL7037), complete with push buttons, operating foil,
O-ring and mounting parts)
3
3
3
3
4
4
4
4
8
8
ED
MC
ED
MC
ED
MC
ED
MC
MC
MC
0
0
3
3
0
0
3
3
0
3
ECOTRON
1
1
4
4
1
1
4
4
1
4
small electronics unit (motor up to 1.5 kW)
big electronics unit (motor from 3 kW) 1)
PROFITRON small electronics unit (motor up to 1.5 kW)
big electronics unit (motor from 3 kW) 1)
HiMod
small electronics unit (motor up to 1.5 kW)
big electronics unit (motor from 3 kW) 1)
standard
made of metal (S61)
standard
made of metal (S61)
standard
made of metal (S61)
standard
made of metal (S61)
made of metal
Additional features (add. "-Z" to order No.)
add. cost
add. features
Push buttons
HiMod
S60
C50
Finish paint
L32
L38
Y35
without push buttons
prepared for „Bluetooth“
made of Macrolon
small electronics unit
big electronics unit 1)
Double thick-film paint 150 µm (instead of 80 µm)
(only metal version)
Very high corrosion protection,
(only metal version)
corrosivity category C5 with long protection time
Top coat of paint for colors other than RAL7037:  specify required color!
Σ List price = List price + Σ add. cost
Padlock
Protection cover for the local control station
.......... [...]
Order No.: 2SX5302-0VS00
Order No.: 2SX5302-0SD00
Electronics housing cover (Stell-E041)
1)
big electronics unit
Version
big electronics unit (from 3 kW)
Page 6
Actuator type
2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.;
HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586.
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
2SY5055 - 0 S T 1 0
Description
PC board plugs
List price
[...]
complete set for power and control wire connections incl. markers
(including the plug versions X1, X2.1, X2.2, .X3.1 and X3.2)
Y070.085/EN
Page 7
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Mechanical
2SY5216-
Output shaft insert A
Version:
depending on the version with thrust washers, thrust needle rims, spigot ring, shaft sealing ring (includes part 217)
Definition: To uniquely define the spare part, include the data positions of the actuators for which use is intended in the order
number of the spare part.
Example: supplied type
Output shaft insert A for F14 flange
2 S A 5 5 4 3 - 0 C E 1 0 - 3 B A 3
bold = relevant data positions
2 S Y 5 2 1 6 - 4 E A 3 0
bold = shifted data positions
Order No.
Description
add. features
2SY5216 -
EA
Output shaft insert A 1)
Rotary actuator standard
1
2
3
4
5
6
7
8
Rotary actuator modulating duty
9-30 Nm
18-60 Nm
37-125 Nm
75-250 Nm
150-500 Nm
300-1000 Nm
600-2000 Nm
1200-4000 Nm
2) 3)
2)
<< Enquire with stating the serial number if necessary! >>
10-20 Nm
20-40 Nm
40-80 Nm
87-175 Nm
175-350 Nm
350-700 Nm
700-1400 Nm
1400-2800 Nm
Flange DIN ISO 5210 DIN 3210
0
1
2
3
4
5
6
F07
F10
F12
F14
F16
F25
F30
Shaft
Type
0
9
H0A
A
A
DIN
--G0
--G1/2
G3
G4
G5
standard
9-30
18-60
37-125
75-250
150-500
300-1000
600-2000
1200-4000
modul. duty
10-20
20-40
40-80
87-175
175-350
350-700
700-1400
1400-2800
ISO 5210
3210
on request
List price
adjacent
Additional features  see following page
Output shaft insert A
(Stell-E216)
1)
Since mid 2002 modified parts are used. Enquire with stating the serial number (see name plate) if necessary!
For replacements before mid 2002: 2nd block „EE“ instead of „EA“!
2)
Since end 2007 modified parts are used. Enquire with stating the serial number (see name plate) if necessary!
nd
For replacements before end 2007: 2 block „EE“ instead of „EA“!
3)
Beginning 2009 modified parts will be used. Inquire with stating the serial number (see name plate) if necessary!
Page 8
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Additional features for Output shaft insert A 2SY5216-.E... (add. "-Z" to order No.)
add. cost
add. features
Acme screw thread
1)
Special thread / design
non-corroding
Y18
Y21
Y70
2)
for gear size 1
gear size 3 2)
gear size 4 2)
Flange F14 / G1/2 and F16 / G3
Flange F25 / G4
Flange F30 / G5
Output shaft type A with special thread / design
A-insert (stem nut) made of stainless steel
Σ List price = List price + Σ add. cost
Order No.
Description
2SY5218 -
DS 1 0
on request
on request
.......... [...]
List price
Gasket set
(O-rings, square seals and shaft sealing rings, complete)
0
Recommended gasket set for commissioning for 2S.5-actuators
(O-rings for electronics housing cover, signaling gear hood and
connection cover/hood)
Gear size 1 2)
Gear size 3 2)
Gear size 4 2)
2SG5
1
3
4
6
Additional features (add. "-Z" to order No.)
add. cost
Kurzangabe
Ambient condition
T09
Temperature range -20°C to +90°C
for gear unit
for
recommended gasket set
Gear size 1 1)
Gear size 3 and 4 1)
Σ List price = List price + Σ add. cost
Gasket set
on request
.......... [...]
(Stell-E218)
1) Add. cost for bushings with acme screw thread LH according to DIN 103, Part 2.
The acme screw thread must be expressly stated, e.g. Tr 16 x 4 LH DIN 103.
2)
Gear size 1
Gear size 3
Gear size 4
Y070.085/EN
Rotary actuators
standard
modul. duty
2SA501.2SA5.1.2SA502.2SA5.2.-
2SA503.2SA504.2SA505.2SA506.2SA507.2SA508.-
2SA5.3.2SA5.4.2SA5.5.2SA5.6.2SA5.7.2SA5.8.-
Linear actuators
modul. duty
2SB5.1.2SB5.2.-
2SB5.3.2SB5.4.2SB5.5.2SB5.6.-
Part-turn actuators
standard
modul. duty
2SC500.2SC550.2SC501.2SC551.2SC502.2SC552.2SC503.2SC504.2SC505.2SC553.2SC506.2SC554.-
Page 9
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5220 -
MG
List price
Signaling gear, complete 1) 2)
(complete with potentiometer mounted and adjusted)
contains the parts 221 and 222 used depending on the version
0
0
5
5
0
0
0
0
2
3
2
3
for standard
SIPOS 5 Flash
for modul. duty
SIPOS 5 Flash
without mechanical position indicator
with mechanical position indicator
without mechanical position indicator
with mechanical position indicator
Additional features (add. "-Z" to order No.)
add. cost
add. features
Standard actuator
in S4/S5 duty
> 4020 revs/stroke
non-contact type
position transmitter
K70
for modulating duty with reduced cycles S4/S5
P34
signaling gear for > 4020 revs/stroke (only 2SA5)
P40
magnetic position sensor (instead potentiometer)
Σ List price = List price + Σ add. cost
on request
.......... [...]
Signaling gear (Stell-E220)
1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part 036.
2) Secure screws with Loctite 222!
Page 10
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5225 -
00
List price
Cover for position recording
(complete with O-ring and mounting parts)
0
0
0
6
8
MA
MD
MN
MH
MN
for Flash 2SA5,
2SB5,
2SC5
for 2SG5
for HiMod 2S.58
for signaling gear, without mechanical position indicator
for signaling gear, with mechanical position indicator
for non-intrusive position encoder „P41“
made of metal, silver-gray coating
(similar RAL7037)
Additional features (add. "-Z" to order No.)
add. cost
add. features
Cover made of metal
K51
Protection class IP 68
for Flash standard
with „L38“
without
with „L38“
without
for „P41“
S71
S72
Ambient condition
T09
Finish paint
L32
L34
L38
Y3 5
Signaling gear hood made of metal,
silver-gray coating (similar RAL7037)
Flat metal cover,
for deliveries from September 2012,
silver-gray coating (similar RAL7037)
Temperature range -20°C to +90°C
for gear unit
Double thick-film paint 150 µm
(instead of 80 µm) (only metal version)
Painting signaling gear hood
Very high corrosion protection,
corrosivity category C5
with long protection time
(only metal version)
for Flash standard
for „P41“
for „P41“
for Flash standard, cover made of metal
for HiMod 2S.58
for Flash standard
for „P41“
for Flash standard
for Flash standard
for „P41“
for 2SG5
for HiMod 2S.58
Top coat of paint for colors other than RAL7037:  specify required color!
Σ List price = List price + Σ add. cost
Cover for position recording
Y070.085/EN
.......... [...]
(Stell-E225)
Page 11
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5250 -
List price
Hand manual 1)
(silver-gray coating (similar RAL7037), depending on the version complete with
support plate, compression spring, connecting cable, O-ring, centrifugal lock for
gear size 4, handle and mounting parts)
1
3
1
3
4
5
6
HU
HU
HM
HM
HU
HU
HU
1
1
1
1
1
1
0
for Flash
0
0
0
0
0
0
0
for HiMod
for Flash and HiMod
2SG5
with crank 60mm
Hand manual gear size 1 2)
with crank 90mm
Hand manual gear size 3 2)
with hand wheel
Hand manual gear size 1 2)
Hand manual gear size 3 2)
Hand manual 2SA5.5/6, 2SB5.5/6
Hand manual 2SA5.7/8
Hand wheel, complete
Additional features (add. "-Z" to order No.)
add. cost
add. features
Chain wheel drive
V00
Hand wheel
Direction of rotation
V2
V2
V2
K5
5
7
8
1
T0
L3
L3
Y3
9
2
8
5
Ambient condition
Finish paint
2)
for gear size 1
gear size 3 2)
2SG5
Hand wheel instead of hand crank
Direction of ratation not indicated on the actuator
Direction of rotation reference at the hand wheel/crank in counter-clockwise direction
Protection class IP68
gear size 12)
gear size 32)
gear size 42)
Temperature range -20 °C to +90 °C for gear unit
Double thick-film paint 150 µm (instead of 80 µm)
Very high corrosion protection, corrosivity category C5 with long protection time
Top coat of paint for colors other than RAL7037:  specify required color!
Σ List price = List price + Σ add. cost
on request
.......... [...]
Hand manual (Stell-E250)
1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part 036.
2)
Gear size 1
Gear size 3
Gear size 4
Page 12
Rotary actuators
standard
modul. duty
2SA501.2SA5.1.2SA502.2SA5.2.-
2SA503.2SA504.2SA505.2SA506.2SA507.2SA508.-
2SA5.3.2SA5.4.2SA5.5.2SA5.6.2SA5.7.2SA5.8.-
Linear actuators
modul. duty
2SB5.1.2SB5.2.-
2SB5.3.2SB5.4.2SB5.5.2SB5.6.-
Part-turn actuators
standard
modul. duty
2SC500.2SC550.2SC501.2SC551.2SC502.2SC552.2SC503.2SC504.2SC505.2SC553.2SC506.2SC554.-
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Order No.
Description
add. features
2SY5252 -
List price
Handle 1) / hand crank / hand wheel
(hand crank / wheel with silver-gray coating (similar RAL7037))
1 GM 0 6
1 GM 1 1
for Flash
for Flash and HiMod
6 GM 0 0
2SG5
1 HH 0 0
for Flash
3 HH 0 0
1 HM 0 0
for HiMod
3 HM 0 0
4 HH 0 0
for Flash and HiMod
5 HH 0 0
Additional features (add. "-Z" to order No.)
Handle gear size 1 2) and 3 2) for hand crank
Handle gear size 4 2) for hand wheel and
handle for HiMod hand wheel gear size 1 2) and 3 2)
Handle for hand wheel
Hand crank 60 mm with handle gear size 1 2)
Hand crank 90 mm with handle gear size 3 2)
Hand wheel with handle gear size 1 2)
Hand wheel with handle gear size 3 2)
Hand wheel with handle for 2SA5.5/6 and 2SB5.5/6
Hand wheel with handle for 2SA5.7/8
add. cost
add. features
Hand wheel
Direction of rotation
Finish paint
V2
V2
V2
L3
L3
Y3
5
7
8
2
8
5
Hand wheel instead of hand crank
Direction of ratation not indicated on the actuator
Direction of rotation reference at the hand wheel/crank in counter-clockwise direction
Double thick-film paint 150 µm (instead of 80 µm)
Very high corrosion protection, corrosivity category C5 with long protection time
Top coat of paint for colors other than RAL7037:  specify required color!
Σ List price = List price + Σ add. cost
on request
.......... [...]
Handle / hand crank / hand wheel (Stell-E252)
1) Secure screw with Loctite 243!
2)
Gear size 1
Gear size 3
Gear size 4
Y070.085/EN
Rotary actuators
standard
modul. duty
2SA501.2SA5.1.2SA502.2SA5.2.-
2SA503.2SA504.2SA505.2SA506.2SA507.2SA508.-
2SA5.3.2SA5.4.2SA5.5.2SA5.6.2SA5.7.2SA5.8.-
Linear actuators
modul. duty
2SB5.1.2SB5.2.-
2SB5.3.2SB5.4.2SB5.5.2SB5.6.-
Part-turn actuators
standard
modul. duty
2SC500.2SC550.2SC501.2SC551.2SC502.2SC552.2SC503.2SC504.2SC505.2SC553.2SC506.2SC554.-
Page 13
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Accessories
Order No.
Description
2SX5100 - 3 P C 0 2
List price
[...]
COM-SIPOS
PC parameterization program
(for commissioning, programming, diagnosis, maintenance and visualization)
Scope of supply



USB stick COM-SIPOS
Order No.
PC parameterization program
User manual DE and GB/US (on USB stick)
Zero-modem cable + USB adapter
Description
2SX5303 - 0 P S 0 1
List price
[...]
Parking socket
(for direct and plug connection, grey surface coating)
Scope of supply


Parking socket
Page 14
Parking socket
Cover with screws
(Stell-PSD)
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Accessories
Order No.
Description
add. features
2SX5300 -
GA
List price
Installation kit for separate mounting
(anthracite anodized, complete with mounting bracket, tubular steel stirrup and,
depending on version, with O-rings, mounting parts, caps or heavy-gauge
threaded joint and all parts needed for electrical connection such as covers and
plugs etc.)
Add. version
of the original
delivery
4
8
0
0
1
0
0
1
3
5
0
3
5
0
Length of
connecting cable
S41 + R70
+ R71
+ R72
S47 + R70
+ R71
+ R72
3m
5m
10 m
3m
5m
10 m
Version
of
connection
(a)
(b)
(a)
Fixed cable connection
Connecting cable with connection plug hoods (electronics unit and gear unit) completely assembled.
Cable ends ready for plugging in.
(b)
Fixed cable connection for variable lengths
Connecting cable with connection plug hood (electronics unit) and with free ends towards the gear unit,
completely assembled. The cable ends to the connection plug hood on the gear unit side must be
connected locally after individual cutting to length and in accordance with the included connection diagram.
Cable ends ready for plugging in.
Additional features (add. "-Z" to order No.)
add. cost
add. features
Ambient condition
Finish paint
T09
L32
L38
Temperature range -20°C to +90°C for gear unit
Silver-gray coating (similar RAL7037)
Very high corrosion protection, corrosivity category C5 with long protection time
Σ List price = List price + Σ add. cost
.......... [...]
Separate mounting, version shown 2SX5300-4GA..
Y070.085/EN
Page 15
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Electronics unit ECOTRON (motor up to 1.5 kW) (Stell55)
Electronics unit ECOTRON (motor from 3 kW) (Stell57)
Page 16
Attachment f, g
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Electronics unit PROFITRON/HiMod (motor up to 1.5 kW) (Stell54)
Electronics unit PROFITRON/HiMod (motor from 3 kW) (Stell56)
Y070.085/EN
Attachment i, k
Page 17
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Gear unit 2SA5. 1/2/3/4.- (Stell93)
Output shaft B1
Output shaft insert
Reducing flange
Output shaft A
Page 18
Attachment a
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Gear unit 2SA5. 5/6/7/8.- (Stell94)
Output shaft B1
Output shaft insert
Reducing flange
Output shaft A
Y070.085/EN
Attachment b
Page 19
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Gear with stroke unit 2SB5. 1/2/3/4.- (Stell98)
Page 20
Attachment c
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Gear with stroke unit 2SB5. 5/6.- (Stell89)
Y070.085/EN
Attachment d
Page 21
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
small part-turn gear 2SG5...- (Stell71)
Page 22
Attachment p
Y070.085/EN
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Gear with part-turn unit 2SC5...- (Stell90)
Y070.085/EN
Attachment e
Page 23
Recommended spare parts and often used accessories
SIPOS 5 Flash/HiMod
Definition of spare parts
Issue 07.17
Subject to changes without notice!
© SIPOS Aktorik GmbH
Im Erlet 2 • D-90518 Altdorf
www.sipos.de
Y070.085/EN