®
The flame resistant Feather Weight Coverall was
developed for the oil and gas industry and designed
to help keep workers cool and comfortable. This
coverall is lightweight, non-abrasive and breathable;
a coverall you actually don’t mind wearing in warm
weather. Benchmark’s flame resistant 5.5 oz. twill is
made from combed cotton ring spun yarns, which
yields a durable and lightweight material. The FR
properties do not wash or wear out and remain
effective for the life of the garment. The coverall is
non-allergenic, skin safe, and will not react with
sweat.
FLAME RESISTANT
4025FR
Benchmark FR Twill, 5.5 oz.
ATPV = 6 cal/cm
HRC 1
COMPLIANCE
ATPV = 6 cal/cm
HRC 1
NFPA 2112 Tested
NFPA 70e
OSHA 1910
ASTM 1506
NESC 2012
BENEFITS
Lightweight & Breathable
Reduces Heat Exhaustion
Ideal for Multi-Layering
Safe to Wear Against Skin
RED
FEATURES
Hi-Temp Zipper & Snap Closure
Zippers on the Chest Pockets
Seven Pockets
Pass-Thrus
Back Elastic Waist
Back Gussets
Adjustable Inseam
Size
S
M
L
XL
2XL
3XL
4XL
5XL
....................................................................................................
Chest
34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
BenchmarkFR.com
888-360-0663
FEATHERWEIGHT
Highest Quality
ADJUSTABLE INSEAM OR HEM
Lowest
Priced
Highest
Priced
Lowest Quality
FOLD UP
TAB DOWN
FOLD DOWN
SIZECHART
S
M
L
XL
2XL
3XL
4XL
5XL
Chest
34 - 36
38 - 40
42 - 44
46 - 48
50 - 52
54 - 56
58 - 60
62 - 64
Waist
29 - 30
32 - 34
36 - 38
40 - 42
44 - 46
48 - 50
52 - 54
56 - 58
33¾ - 34
34 3 /8 - 34 5 /8
35 - 35¼
Men’s Coveralls
Sleeve Length
Inseam**
32 1/2 - 32 3 /4 33 1/8 - 33 3 /8
35 5 /8 - 35 7/8 36¼ - 36½
36 7/8 - 37 1/8
Coverall inseams are adjustable and can be shortened by the wearer: Short (5’2” - 5’7”), Regular (5’8” - 6’), Long (6’1” - 6’3”)
** Coveralls can also be permanently hemmed to length: Short (30”), Regular (32”), and Long (34”)
WASHINSTRUCTIONS
Recommended Options: Home Wash, Dry Cleaning, Industrial or Commercial Wash
Our wash instructions are simple and mostly require that you leave out extra chemicals
during the laundering process. Benchmark FR garments will remain flame resistant for the
life of the garment provided they are cared for properly. Detailed wash instructions are
inside each garment. To keep them looking their best machine wash warm and tumble dry
low heat. Use store purchased soft powder or liquid detergent. Do not use lye based soap,
chlorine bleach, oxygenating agents or acid rinses (common to industrial laundries). Iron
without steam. Clean garment if soiled with flammable material and repair garments with
like materials if damaged. Wash once every six months regardless of use (ASTM F2757).
ADDONS
PATCHES
REFLECTIVE
TRANSFERS
CUSTOM
SIZES
REFLECTIVE
STRIPING
BenchmarkFR.com
EMBROIDERY
888-360-0663
SCREEN
PRINT
CUSTOM
HEM