The Style - Felling Trailers

FT-10 T (Utility Tilt)
12’ + 4’ deck length
FT-6 DT (Dump Trailer)
5’ x 10’ dump box
The
RL-100
Style:
Quality - Craftsmanship - Pride
Utility Tilt Line
STANDARD EQUIPMENT
•
•
•
•
3,500 lb. (1,588 kg) GVWR
(1) 3,500 lb. axle (4” drop)
Hydraulic Surge Brakes
(2) ST205/75R15 LRC radial tires
on 5 hole white modular wheels
• 2,000 lb. swivel jack
• 15” loaded deck height
• 6º-10º approximate loading angle
(dependent on deck length)
FT-3 T (Utility Tilt) 74” x 10’
(Other widths and lengths available)
STANDARD EQUIPMENT
•
•
•
•
FT-6 T (Utility Tilt) 6’ x 12’ (shown w/Opt. 7,000 lb. drop-leg jack)
•
•
•
•
(Other widths and lengths available)
6,000 lb. (2,721 kg) GVWR
(1) 6,000 lb. axle (4” drop)
Hydraulic Surge Brakes
(2) ST225/75R15 LRD radial tires
on 6 hole white modular wheels
2,000 lb. swivel jack
15” loaded deck height
(4) tie downs
8º-10º approximate loading angle
(dependent on deck length)
STANDARD EQUIPMENT
•
•
•
•
FT-10 T (Utility Tilt) 12’ + 4’ Tilt
(Other widths and lengths available)
•
•
•
•
9,980 lb. (4,527 kg) GVWR
(2) 6,000 lb. axle (4” drop)
Hydraulic Surge Brakes
(4) ST225/75R15 LRD radial tires
on 6 hole white modular wheels
7,000 lb. drop-leg jack
15” loaded deck height
(6) tie downs
8º-10º approximate loading angle
(dependent on deck length)
• D.O.T. approved LED lighting
STANDARD EQUIPMENT
•
•
•
•
FT-3 (Utility) 74” x 10’
2,900 lb. (1,315 kg) GVWR
(1) 3,500 lb. axle (4” drop)
No Brakes
(2) ST205/75R15 LRC radial tires
on 5 hole white modular wheels
• 2,000 lb. swivel jack
• 15” loaded deck height
• 4’ full width steel ramp
(Other widths and lengths available)
FT-12 IT-SP (Industrial Tilt - Stationary Platform)
FT-24-2 with Opt. Hydraulic Tail
16’-20’ deck lengths with 4’-6’ stationary platforms available
24’-28’ deck lengths available
Designed & Engineered
For The Long Haul
STANDARD EQUIPMENT
•
•
•
•
9,980 lb. (4,527 kg) GVWR
(2) 6,000 lb. axle (4” drop)
Hydraulic Surge brakes
(4) ST225/75R15 LRD radial tires
on 6 hole white modular wheels
• 7,000 lb. drop-leg jack
• 15” loaded deck height
• (6) tie down (inside back: 2 D-rings,
FT-10 FP (Pan Series) 79” x 14’
front: 2 corner tie downs, center: 2 weld-on
tie downs)
(Other lengths available)
• (2) 4’ 6” spring-assist channel type ramps
• D.O.T. approved LED lighting
STANDARD EQUIPMENT
• 9,980 lb. (4,527 kg) GVWR
(3-4 yd. dumpster)
• (2) 6,000 lb. axle (4” drop)
• Hydraulic Surge brakes
• (4) ST225/75R15 LRD radial tires
on 6 hole white modular wheels
• 7,000 lb. drop-leg jack
• Single hydraulic cylinder
• 5’ slide-out ramps
with storage under rear of trailer
• Double rear swing-out doors
• (4) D-rings
• 24” loaded deck height
• 45º dump angle
• Tread plate fenders
• D.O.T. approved LED lighting
FT-10 DT-HD 80” x 12’
(Other lengths available)
STANDARD EQUIPMENT
•
•
•
•
•
•
•
•
•
•
•
6,000 lb. (2,721 kg) GVWR (2 yd. dumpster)
(1) 6,000 lb. axle (4” drop)
Hydraulic Surge brakes
(2) ST225/75R15 LRD radial tires
on 6 hole white modular wheels
2,000 lb. swivel jack
Single hydraulic cylinder
Double-acting spreader end gate
(8) Stake pockets (3 on each side & 2 in front)
24” loaded deck height
42º dump angle
Tread plate fenders
FT-6 DT 5’ x 10’
Shown with optional 5’ Landscape Gate
(Other widths and
lengths available)
FT-50 MX-TD (Tilt Deck) with Opt. Winch
FT-7 OT (Open
Top Utility) 12’-14’
38’-42’ deck lengths available
deck lengths available
Other
Trailers’ Brochures Available
L=Angle • GN=Gooseneck • DE=Drop deck with E channel frame • MX=Semi Step Deck • SPT=Stationary Platform Tilt • IT=Industrial Tilt
To learn more about us, have us mail you a specific full color brochure, or locate our nearest
dealer, go to www.felling.com or give us a call at 1-800-245-2809.
Your
TRAILER Dealer:
Manufactured & Distributed by:
Felling Trailers, Inc.
1525 Main Street South • Sauk Centre, MN 56378
(320) 352-5239 • (320) 352-5230 FAX
Merle J. Felling, President
Check out our Web Site at: www.felling.com
E-mail us at: [email protected]
Call
1-800-245-2809 for your nearest dealer
© 2009 Felling Trailers, Inc. Form No. RL-100 1/09 Printed in U.S.A.