RECONSTRUCTION AND PERFECT ENDS TREATMENT
Benef its:
restores shine, long-lasting nourishment and hydration.
STEP 1 SHAMPOO
Apply suf f icient quantity of ENHANCING SHAMPOO to damp hair and massage in gently , ensuring that the product forms plenty of
foam. Do so twice. Towel-dry carefully to eliminate excess water.
ENHANCING SHAMPOO
With a slightly acid pH, this gentle shampoo hydrates and prepares the hair for subsequent reconstruction treatment.
Contains Allantoin, Avocado Oil, Jojoba Oil and extract of Epilobium.
1
STEP 2 APPLICATION
•
•
Apply a suf f icient quantity of REVITAL MASK depending on the quantity of hair and degree to which it is damaged.
•
•
•
Cover with a cap or f ilm and leave on for 8/10 minutes.
Massage each lock of hair in your hands to facilitate the product’s penetration and ensure even distribution, thereby helping
the revitalization process.
For very damaged hair, use a heat source to enhance product penetration.
Af ter treatment time has passed, remove the cap and rinse thoroughly with warm water until all product has been eliminated.
REVITAL MASK
This is a professional treatment able to repair, strengthen and nourish hair fibres and bulbs deep-down.
Contains silk proteins to increase hydration, extracts of stem cells from a specific variety of Swiss apple (Uttwiler
Spatlauber)and sweet almond extract, which penetrate deep-down, restoring hair powerfully. Thanks to the inclusion of
UV filters, it also protects against atmospheric agents and the sun’s rays in particular.
STEP 3 DRYING AND FLAT IRONING
•
•
•
Now blow dry.
Apply Thermo Repair to the ends and particularly damaged parts of dry hair without rinsing.
Flat iron 3 to 5 times at a temperature ranging between 180°C and 230°C depending on hair type (use a higher temperature
for stronger, darker hair, reduce the temperature for f iner, lighter hair).
THERMO REPAIR
Immediately seals cuticles and split ends. Immediately regenerates damaged hair fibres. Thanks to the special application method
(high temperature flat iron) and its composition, Thermo Repair has an immediate yet long-lasting effect that can be strengthened
by subsequent applications, giving extraordinary visual results right from the first application.
Mix of ceramides and derivatives of Limnanthes alba (or “white meadowfoam”), which, once activated by the iron heat, act
rapidly and remain active on the hair even after 3-4 washes.
2
BOTOX SENSATION TREATMENT
THERMO REPAIR TOP UP
Benef its: Its action is an immediate hair “top up” in all respect giving maximum plumping, volumizing, reinforcing ef fect, for a sensational
brightness and a top sof tness. Decide the type of desired treatment depending on the result that you want to get on the hair: THERMO REPAIR
TOP UP YOUR VOLUME, THERMO REPAIR TOP UP YOUR POST COLOR, THERMO REPAIR TOP UP YOUR FORCE, THERMO REPAIR TOP UP EXTREME,
THERMO REPAIR TOP UP YOUR ENDS.
THERMO REPAIR TOP UP YOUR VOLUME
BENEFITS: increases the volume of hair thanks to its revitalizing and plumping action, instantly gives vitality and body. Suitable for f ine, worn-out,
damaged, medium or thick hair without volume.
• SHAMPOO: Wash hair with KERATIN PLUS GOLD SHAMPOO (Step 1) to eliminate impurities and residual.
• MIXING: Prepare 40 ml of mousse with: 5 ml of THERMO REPAIR TOP UP and 35 ml of warm water. Mix to obtain a homogenous mousse;
• APPLICATION: Apply on hair with the brush 1 cm from the roots, lock by lock, sof tly massaging and combing to eliminate any excess. Leave
on 15 minutes under heat source. Rinse out with cold water for 10/15 seconds thin hair; medium and/or thick hair should be rinsed out only
in the presence of excess product.
• DRYING AND IRONING: Blow-dry hair with a brush. Straight hair with f lat iron to complete the treatment. Flat iron temperature: f ine hair 180°C
(356°F). For medium and thick hair from 180°C to 210°C (356°F-410°F).
1
THERMO REPAIR TOP UP YOUR POST COLOR
BENEFITS: gives brightness and brilliance to the color, nourishes and repairs the hair f ibers. Suitable for all hair types (f ine, medium, thick) colored
or bleached.
• SHAMPOO: Rinse the color with ENHANCING SHAMPOO.
• MIXING: Prepare 30 ml of mousse with: 5 ml of THERMO REPAIR TOP UP and 25 ml of warm water (quantity suggest for medium hair). Mix
to obtain a homogenous mousse.
•
•
APPLICATION: Apply on hair with the brush 1 cm from the roots, lock by lock, with a sof t massage combing to eliminate any excess. Leave
on 15 minutes under heat source. Rinse out with cold water for 10/15 seconds thin hair; medium and/or thick hair should be rinsed out only
in the presence of excess product.
DRYING AND IRONING: Blow-dry hair with brush. Straight the hair with f lat iron to complete the treatment. Flat iron temperature: all types of hair
180°(356°F).
THERMO REPAIR TOP UP YOUR FORCE
BENEFITS: gives force and strengthens the hair tex ture decreasing the “breaking point” of the capillary f ibers. Furthermore, thanks to its intensive action
restores the cuticles and the open capillary f ibers.
• SHAMPOO: Wash hair with KERATIN PLUS GOLD SHAMPOO (Step 1) to eliminate the impurities and residual.
• MIXING: Prepare 40 ml of mousse with: 5 ml of THERMO REPAIR TOP UP and 35 ml d of warm water. Mix to obtain a homogenous mousse.
• APPLICATION: Apply on hair with the brush 1 cm from the roots, lock by lock, sof tly massaging and combing to eliminate any excess. Rinse
out with cold water for 10/15 seconds thin hair; medium and/or thick hair should be rinsed out only in the presence of excess product.
• DRYING AND IRONING: Blow-dry hair with brush. Straighten the hair with f lat iron to complete the treatment. Flat iron temperature: f ine hair 180°
(356°F). For medium and thick hair from 180°C to 210°C (356°F-410°F). For a silky ef fect, iron 7 / 8 times each lock.
THERMO REPAIR TOP UP EXTREME
BENEFITS: regenerates and revitalizes ex tremely damaged hair that requires shock action!
•
•
•
•
SHAMPOO: Wash hair with KERATIN PLUS GOLD SHAMPOO (Step 1) to eliminate the impurities and residual.
MIXING: Prepare 30 ml of mousse with: 10 ml of THERMO REPAIR TOP UP and 20 ml of warm water. Mix to obtain a homogenous mousse.
APPLICATION: Apply on hair with brush 1 cm from the roots, lock by lock, sof tly massaging and combing to eliminate any excess. Leave on
15 minutes under heat source. Rinse out with cold water for 10/15 seconds thin hair; medium and/or thick hair should be rinsed out only in
the presence of excess product.
DRYING AND IRONING: Blow-dry hair with brush. Straighten the hair with f lat iron to complete the treatment. Flat iron temperature: f ine hair 180°
(356°F). For medium and thick hair from 180°C to 210°C (356°F-410°F).
THERMO REPAIR TOP UP YOUR ENDS
BENEFITS: moisturizes, nourishes and strengthens hair repairing and giving instantly vitality to lengths and hair ends. Suitable for damaged hair with
ruined ends. Af ter performing the most suitable service according to the type of result you want to get on the hair (volume, strength or shining post
color) proceed with the application of THERMO REPAIR PERFECT ENDS.
• APPLICATION: Apply THERMO REPAIR PERFECT ENDS on dry hair especially on ends and particularly damaged areas, without rising.
• IRONING: Run the f latiron from 3 to 5 times at a temperature between 180°C and 230°C (356°F and 446°F) depending on the hair type (use a
temperature higher for stronger and dark hair, reduce the temperature for f iner and bleached hair).
2
THERMO REPAIR EQUALIZER TREATMENT
Benef its:
Revolutionary and innovative treatment that guarantees a signif icant reduction in the risk of breakage, creating a
stronger base for the application of ex tensions.
Enhances hair gloss by supplementing its structure with nutrients needed to restore health, beauty and uniformity to hair af ter
ex tension application. Lasts 1 to 2 months. Also recommended for maintaining ex tensions.
STEP 1 SHAMPOO
•
•
Shampoo twice for untreated or colored hair;
Shampoo once for bleached blonde / severely over-processed /severely damaged hair.
1
STEP 2 APPLICATION
Blow dry:
• 70% untreated and colored hair;
• 50% bleached blonde / over-processed / damaged hair.
Wear disposable gloves, divide hair into sections and spray EQUALIZER on each section at 0.5 cm from the skin. Make sure the
treatment is applied to the full length of the hair. Massage each section and comb through to remove any excess product.
Leave on for 15 minutes under a source of heat and cover hair with a disposable plastic cap.
Af ter the leave on time, rinse with warm water for 15 seconds to just remove excess product.
STEP 3 BLOW DRY AND FLAT IRON
Blow dry 100%.
Use electric hair iron at: 200°C for colored and bleached hair; 210°C for natural, untreated hair.
Assess the temperature to be used based on hair structure and your diagnosis.
Run the hair iron 6-7 times and check the reaction/endurance of ends and really damaged areas.
TIPS
Install ex tensions soon af ter the treatment. If the treatment is performed on a client with ex tensions, be careful not to run f lat iron on ex tensions bonds.
THERMO REPAIR EQUALIZER
Extraordinary strengthening treatment to be used before installing extensions or to maintain hair. Thanks to the high percentage
of Ceramide 3 and Limnanthes Alba and special active agents, it regenerates damaged and brittle hair, making it look like
extensions.
Formulated with Meadows Foam for its nourishing and moisturizing action and Ceramide 3 for its restructuring action. Free
from parabens and allergens, is a concentrate of light well-being for hair.
2