Product Specifications

Product Specifications
Project: King Abdul Aziz University - Laboratory, K.S.A.
Washer-Disinfector G 7883 CD AE TA DK ADP SST (Mat. No. 05919770)
Design
- Front-loading unit with bottom-hinged door, slanted fascia
panel, without baskets
- Freestanding unit without lid / can be built under
- Spaceframe casing
- Fascia panel with aluminium profile, brushed and lacquered
- Surface materials and finish: Miele brushed finish 2, 220-grain
Features
- Stainless-steel cabinet
- Docking system for upper baskets and mobile units
- Buzzer, acoustic signal at end of programme
- Programme continuation in event of power outage
- Serial interface for process documentation
Circulation pump
- Throughput [l/min]: 400
- Max. power rating [kW]: 0.7
- Max. pressure [bar]: 0.58
- PP housing
- PVDF impeller
Cleaning technology
- Freshwater system, max. temperature 93°C
- Drain pump DN 22, head height 100 cm
- Max. power rating – Drain pump [kW]: 0.08
- Length of drain hose: 150 cm
- 2 NTC sensors for controlling and redundantly monitoring temperature
- 2 stainless-steel spray arms
- Inlet pipe: Stainless steel
- Connection hoses: Fabric-reinforced
- Flowmeter (Tolerance <2.5%)
- Circulation filters: 4-fold filtration: Large surface filter, coarse filter, glass splinter filter, micro-fine filter
Inner cabinet (material code/grade)
- Base:
- Side panels:
- Roof:
- Door inner panel:
- Inner cabinet dimensions H I W I D [mm]:
- Useable volume [l]:
(1.4435 / 0.5 mm)
(1.4301 / 0.4 mm)
(1.4301 / 0.4 mm)
(1.4401 / 0.7 mm)
500 / 535 / Top 474, Bottom 516
approx. 125
Controls/programmes
- MTN Multitronic Novo Plus, electronic controls, 10 programmes
Water supply connection:
- 4 inlet hoses, ½" with ¾" threaded union
- Inlet hose length: 170 cm
- 1 x Cold water
- 1 x Cold water DK
- 1 x Hot water
- 1 x Demineralised water
- 1 x Demineralised water feed pump
- 1 x drain hoses/machine, DN 22
- 1 x Drainage DK
0.5-10 bar flow pressure [50-1000 kPa]
0.5-10 bar flow pressure [50-1000 kPa]
0.5-10 bar flow pressure [50-1000 kPa]
0.5-10 bar flow pressure [50-1000 kPa]
0.085-0.5 bar [8.5-50 kPa]
Electrical connection
- 3 AC 220 V 60 Hz, supply lead approx. 1.6 m, 5 x 5.25 mm²
- Heating [kW]: 6.0
- Total rated load [kW]: 6.7
- Fuse rating [A]: 3 x 20
Dispenser systems
- 1 door dispenser for powder detergents
- 1 door dispenser for liquid surfactant
- 1 DOS 10/30 dispenser pump for liquid acidic agents
- 1 DOS 60/30 dispenser pump for liquid detergent
- 1 drawer with 2 supply containers, 5 l each
Water softener
- Monobloc water softener for cold and hot water to max 70°C
Steam condenser
- Aerosol
Drying unit
- Pre-filter: Class 4
- Particulate filter: HEPA filter S-Class EU13
- Rated loads (fan, heater bank, total) [kW]: (0.3; 1.8; 2.1)
- Air throughput [m³/h]: 55
- Temperature controls [°C]: in 1°C increments [50-99]
- Time settings: in 1-minute increments [1-99]
Dimensions/Weight
- External dimensions H / W / D [mm]: 820 / 900 / 700
- Basket clearance [mm]: 275
- Weight, empty [kg]: 101
Sound emissions:
- Freestanding: 64.9 dB (A)
- Built-under unit: 61.3 dB (A)
Heat dissipation
- Heat dissipation to installation room: 0.5 kWh or 1.4 MJ
- Heat dissipation via baskets/load: 0.5 kWh or 1.4 MJ
(Multi-tier unit with 40 kg load)
Test certificates
- VDE, EMC, DVGW, IP X1, MPG CE 0366
Baskets / inserts for Washer-Disinfector
E 196 Basket set TA (consists of O 195, E 388, E 106, 2 x AK12):
O 195 Upper basket/carrier
E 388 Injector basket ½ TA
 Open front
 For beakers / small components
 Stacking height 145 mm
 Built-in spray arm
 H 215, W 531, D 475 mm
 Left half: 16 injector jets to support narrow-necked
glassware
 Right half: free to stack with inserts, e.g. with E 106
 Stacking height with upper basket: 284 mm
Stacking height without uppe basket: 488 mm
 Connection for drying unit
E 106 Insert ½
AK 12 Insert ½
 To support wide-mouthed glassware, measuring
 For funnels, beakers, wide-necked glassware, small
glasses, etc.
components with plastic lids, plugs, etc.
 10 spring hooks, H 175 mm
 For placement in the O 195 upper basket
 16 spring hooks, H 105 mm, spacing approx. 60 mm  H 67 (127), W 225, D 442 mm
 H 186, W 195, D 430 mm