Tariff
Description
===========================================================================
8201.10.00
SHOVEL HEADS, GRAIN, ALUMINIUM, having ALL of the following:
(a) length NOT greater than 400 mm;
(b) width NOT greater than 340 mm;
(c) weight NOT greater than 800 g
Op. 17.08.1995
Dec. 28.11.1995
- TC 9509820
8201.30.00
PARTS,HAND TOOL, steel, being ANY of the following:
(a) mattock heads;
(b) pick heads;
(c) hoe heads;
(d) rake heads
Op. 19.07.2010
Dec. 11.10.2010
- TC 1032751
8201.30.00
MATTOCKS OR PICKS OR HOES OR RAKES
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302742
AXES, firemen’s
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341640
KNIVES, cane cutters’
Op. 21.01.1985
Dec. 25.05.1987
- TC 8732774
8201.40
8201.40
8201.40
MATCHETS (machetes), having BOTH of the following:
(a) blade length NOT less than 450 mm;
(b) blade thickness NOT less than 3 mm
Op. 21.01.1985
Dec. 25.05.1987
- TC 8732775
8201.40.00
AXES OR HATCHETS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302744
SHEARS, foot-rot
Op. 21.06.1988
Dec. 09.09.1988
- TC 8805780
8201.50
8201.50
GRASS SHEARS, having BOTH of the following:
(a) stainless steel or teflon coated carbon steel blades;
(b) blade adjustment allowing blades to swivel to three cutting
planes
Op. 15.04.1991
Dec. 27.02.1992
- TC 9201382
8201.50.00
SHEARS, POULTRY
Op. 15.10.2012
8201.50.00
8201.50.00
Dec. 02.01.2013
- TC 1239258
TOOL SETS, comprising ALL of the following:
(a) trowels;
(b) secateurs;
(c) forks
Op. 05.08.2008
Dec. 31.10.2008
- TC 0825007
SECATEURS OR SHEARS, one handed
Op. 16.09.2008
Dec. 05.12.2008
- TC 0831307
8201.50.00
PRUNING SETS, garden, consisting of secateurs and pruning saw
Op. 30.10.2008
Dec. 16.01.2009
- TC 0837712
8201.50.00
SHEARS, grass, having a blade adjustment allowing the blades to
swivel to three cutting planes
Op. 14.01.1994
Dec. 22.04.1994
- TC 9401326
8201.50.00
SECATEURS, BY-PASS
Op. 04.01.2000
8201.50.00
Dec. 17.03.2000
- TC 0000072
SECATEURS OR PRUNERS OR SHEARS, ONE HANDED, bypass design
Op. 14.03.2003
Dec. 17.07.2003
- TC 0302745
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8201.60.00
SETS, GARDEN HAND TOOL, consisting of ALL of the following:
(a) pruning shear;
(b) lopping shear;
(c) hedge shear
Op. 20.06.2014
Dec. 10.09.2014
- TC 1420943
8201.60.00
SHEARS OR LOPPERS, two handed
Op. 16.09.2008
Dec. 05.12.2008
- TC 0831308
SHEARS, HEDGE, two handed
Op. 12.02.1998
Dec. 24.04.1998
- TC 9801302
PRUNING SHEARS, TWO HANDED, anvil design
Op. 14.03.2003
Dec. 17.07.2003
- TC 0302746
SCYTHES
Op. 06.12.1983
- TC 8341643
8201.60.00
8201.60.00
8201.90
8201.90
8201.90.00
8201.90.00
Dec. 06.12.1983
SHEARS, sheep, but NOT including footrot shears
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341645
FORKS, garden, weight NOT exceeding 210 grams
Op. 01.01.2012
Dec. 30.11.2011
- TC 1134436
GOLF DIVOT REPAIRERS
Op. 01.01.2012
- TC 1134437
Dec. 30.11.2011
8201.90.00
TOOL SETS, NOT exceeding 500 grams, comprising ALL of the following:
(a) trowel (spade);
(b) cultivator;
(c) fork
Op. 27.08.1993
Dec. 13.12.1993
- TC 9310022
8201.90.00
TOOLS, garden, individual weight NOT exceeding 300 grams, being
ANY of the following:
(a) trowel (spade);
(b) cultivator;
(c) transplanter
Op. 13.01.1994
Dec. 26.04.1994
- TC 9401307
8201.90.00
TOOL SETS, garden, NOT exceeding 900 grams, comprising at least
ANY three of the following:
(a) trowel (spade);
(b) cultivator;
(c) fork;
(d) transplanter
Op. 13.01.1994
Dec. 26.04.1994
- TC 9401308
8201.90.00
SICKLES
Op. 07.07.1994
8201.90.00
Dec. 07.10.1994
- TC 9406014
HAND TOOLS, AGRICULTURE OR HORTICULTURE OR FORESTRY, being ANY of
the following:
(a) bulb planters and/OR trowels;
(b) potting trowels;
(c) cultivators;
(d) lawn aerators;
(e) edgers;
(f) log splitters;
(g) single OR double pronged hoes;
(h) timber wedges;
(i) post hole diggers;
(j) potting scoop;
(k) top soil spreader;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(l) weeders;
(m) weeders and/OR cultivators;
(n) cultivators and/OR tillers;
(o) rakes and/OR hoes;
(p) gutter cleaners
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302740
8202.10
SAWS, permanently combined with a mitre joint assembly appliance
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341663
8202.10
SAWS, but NOT including ANY of the following:
(a) hacksaws;
(b) bow saws;
(c) keyhole saws and the like
Op. 26.02.1988
Dec. 26.02.1988
- TC 8733329
BOW SAWS
Op. 01.07.1992
Dec. 13.08.1992
- TC 9205319
HAND SAWS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302747
8202.10
8202.10.00
8202.20
BANDSAW BLADING, in coil, unjoined, being of the hardened edge
type, having the following specifications:
(a) blade width of 31-41 mm (inclusive), a gauge/thickness from
1.07 mm to 1.27 mm (inclusive) and having a vari-tooth pitch
from 1.4 to 2.5 t.p.i;
(b) blade width of 50-54 mm (inclusive), having a gauge/thickness
from 1.27 mm to 1.60 mm and having a vari-tooth pitch from
1.4 to 2.5 t.p.i
Op. 27.07.1992
Dec. 03.12.1992
- TC 9206946
8202.20.00
BANDSAW BLADING, in coils, NOT welded OR brazed, in widths NOT
less than 1.5 mm and NOT greater than 80 mm, being ANY of the
following:
(a) hardened tooth;
(b) hardened edge;
(c) grit edge
Op. 22.12.2011
Dec. 22.12.2011
- TC 1140654
8202.20.00
BAND SAW BLADING, tungsten carbide grit edge
Op. 07.06.1993
Dec. 10.09.1993
- TC 9305191
8202.20.00
BLADES OR BLADING, BI-METAL, in coils, unjoined (welded or brazed)
in widths from 1.5 mm to 100 mm (inclusive) being ANY of the
following:
(a) hardened tooth;
(b) hardened edge;
(c) welded edge
Op. 12.10.1999
Dec. 10.12.1999
- TC 9909944
8202.31
BLADES, saw, circular, dia exceeding 1.2 m, having inserted
replaceable teeth, with working part of steel
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341656
8202.31
TOOLS, key cutting machine
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341666
8202.31.00
BLADES, CIRCULAR, PAPER LOG SAW, being alloy steel containing
chromium AND molybdenum AND vanadium
Op. 22.04.2016
Dec. 20.07.2016
- TC 1614897
8202.31.00
BLADES, CIRCULAR SAW, high speed steel, having ALL of the
following:
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(a) blade diameter NOT less than 40 mm;
(b) blade thickness NOT less than 1 mm;
(c) blade centre hole diameter NOT less than 20 mm
Op. 20.03.2013
Dec. 24.06.2013
- TC 1309981
8202.31.00
BLADES, SAW, having ALL of the following:
(a) cutting teeth per blade NOT less than 32;
(b) blade diameter NOT less than 40 mm;
(c) blade thickness NOT less than 1.5 mm;
(d) blade centre hole diameter NOT less than 40 mm
Op. 31.01.2007
Dec. 05.07.2007
- TC 0710057
8202.39.00
BLADES, SAW AND/OR GRINDER, being ANY of the following:
(a) tungsten carbide tipped;
(b) polycrystalline diamond tipped;
(c) diamond tipped
Op. 21.08.2013
Dec. 18.11.2013
- TC 1328530
8202.91
BLADES, power, hacksaw, having
Op. 06.12.1983
Dec.
BLADES, jigsaw or reciprocating
tools
Op. 01.01.1988
Dec.
8202.91
8202.91.00
8202.91.00
8202.99
8202.99
a length of 650 mm or greater
06.12.1983
- TC 8341654
saw, for power operated hand
01.01.1988
- TC 8807183
BLADES, hacksaw, tungsten carbide grit edge
Op. 06.05.1994
Dec. 26.08.1994
- TC 9404562
SAW BLADES, straight
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302748
BLADES, coping saw
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341652
BLADES, fret saw
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341653
8202.99
BLADES, jigsaw or reciprocating saw, for power operated hand
tools
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341655
8202.99
BLADES, bow saw
Op. 01.07.1992
Dec. 13.08.1992
- TC 9205318
BLADES, HOLE SAW
Op. 19.03.2015
Dec. 15.06.2015
- TC 1511243
8202.99.00
8202.99.00
BLADES, HOLESAW, tungsten carbide tipped high speed steel
Op. 24.09.2012
Dec. 27.12.2012
- TC 1236323
8202.99.00
HOLESAWS, tungsten carbide grit edge
Op. 26.04.1993
Dec. 30.07.1993
- TC 9305408
BLADES, holesaw, carbide tipped
Op. 28.10.1993
Dec. 04.02.1994
- TC 9312637
8202.99.00
8203.10
FILES, precision, including needle files, having numerical cuts
(character of teeth) of 000, 00, 0, 1, 2, 3, 4, 5, 6, 7 or 8
Op. 01.07.1983
Dec. 01.07.1983
- TC 8333980
8203.10
SHARPENERS, steel edged snow ski
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341863
REAMERS, gas cutter or welder tip
Op. 25.10.1985
Dec. 10.04.1987
- TC 8534170
8203.10
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8203.10
FILES, milled tooth, having teeth cut from a flat bar by a milling
operation (whether or not subsequently heated and curved in
section) and having the teeth NOT higher than the uncut portion
of the bar
Op. 10.11.1987
Dec. 02.12.1987
- TC 8735320
8203.10
RASPS, comprising a handle
punched sheet metal blade
pass through holes in the
Op. 19.09.1988
or holder and an interchangeable
whereby the material being worked can
blade
Dec. 19.09.1988
- TC 8808180
8203.10.00
FILES OR RASPS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302774
NIPPERS, ceramic tile
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341721
PULLERS, nail, lever operated
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341725
8203.20
8203.20
8203.20
TOOLS, crimping, but NOT including crimping tools put up in packs
containing electrical connectors
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532098
8203.20
PLIERS, snipe nose, whether or not equipped with side cutter,
but NOT including pliers having a length of 110 mm or greater
but NOT exceeding 230 mm
For the purposes of TC 8632338 plier type and dimension are as
described in International Standard ISO 5742
Op. 18.02.1986
Dec. 12.03.1986
- TC 8632338
8203.20
NIPPERS, diagonal cutting, but NOT including nippers having a
length of 120 mm or greater but NOT exceeding 230 mm
For the purposes of TC 8632339 nipper type and dimension are
as described in International Standard ISO 5742
Op. 18.02.1986
Dec. 12.03.1986
- TC 8632339
8203.20
NIPPERS, end cutting, but NOT including nippers having a length
of 140 mm or greater but NOT exceeding 230 mm
For the purposes of TC 8632340 nipper type and dimension are
as described in International Standard ISO 5742
Op. 18.02.1986
Dec. 12.03.1986
- TC 8632340
8203.20
PINCERS, carpenters" or construction workers", as described in
International Standard ISO 5742
Op. 18.02.1986
Dec. 12.03.1986
- TC 8632343
8203.20
PLIERS, snipe nose, NOT equipped with a cutting edge AND having
plain jaws as described in International Standard ISO 5742
Op. 18.02.1986
Dec. 18.02.1986
- TC 8633992
8203.20
PLIERS, snipe nose, tip cutting, having cutting surfaces located
towards the tip of the jaw
Op. 18.02.1986
Dec. 18.02.1986
- TC 8633995
8203.20
NIPPERS, oblique cutting, but NOT including nippers having a
length of 120 mm or greater
For the purposes of TC 8633996, nipper type and dimension are
as described in International Standard ISO 5742
Op. 18.02.1986
Dec. 18.02.1986
- TC 8633996
8203.20
PLIERS, safety wire twisting, having a spiral wire twisting
mechanism
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 18.02.1986
Dec. 18.02.1986
- TC 8634173
8203.20
PLIERS OR WRENCHES, toggle action, having BOTH of the following:
(a) locking jaw mechanism;
(b) jaw release mechanism
Op. 18.02.1986
Dec. 18.02.1986
- TC 8634425
8203.20
PLIERS, lever assisted or toggle lever assisted
For the purposes of TC 8634426, lever assisted and toggle
lever assisted are as described in International Standard
ISO 5742
Op. 18.02.1986
Dec. 18.02.1986
- TC 8634426
8203.20
PLIERS, engineers" (combination) or linesmen"s, but NOT including
pliers having a length of 140 mm or greater but NOT exceeding
245 mm
For the purposes of TC 8635229 plier type and dimension are
as described in International Standard ISO 5742
Op. 04.12.1986
Dec. 04.12.1986
- TC 8635229
8203.20
PLIERS, retaining ring, reverse action
Op. 18.02.1986
Dec. 16.12.1986
- TC 8635245
8203.20
PLIERS, spring band loaded, self-opening, having a weight NOT
exceeding 35 g
Op. 19.05.1987
Dec. 06.10.1987
- TC 8733935
8203.20
TOOLS, hand, non-sparking, composed wholly (except for handles,
if any) of beryllium copper
Op. 10.09.1987
Dec. 23.03.1988
- TC 8734620
8203.20
NIPPERS, bonsai pruning, having BOTH of the following:
(a) end cutting;
(b) concave cutting edge
Op. 15.03.1988
Dec. 18.07.1988
- TC 8803432
8203.20
PLIERS, being ANY of the following types as described in
International Standard ISO 5742:
(a) flat nose;
(b) round nose;
(c) circlip, external or internal;
(d) slip joint (NOT being multiple slip joint);
(e) gaspipe;
(f) fencing tool (NOT being button plier fence tool)
Op. 12.10.1988
Dec. 12.10.1988
- TC 8808667
8203.20
PLIERS, multiple slip joint, but NOT including pliers having a
length of 125 mm or greater but NOT exceeding 400 mm
For the purposes of TC 8901857 plier type and dimension are
as described in International Standard ISO 5742
Op. 26.04.1989
Dec. 26.04.1989
- TC 8901857
8203.20
BLANKS, plier, or nipper, incorporating end or side cutters, but
NOT including sheep ear punching plier blanks or wire stripper
blanks
For the purposes of TC 8905614 "blanks" are goods:
(a) the cutters of which have NOT been induction hardened;
(b) have not been subjected to ANY of the following
finishing processes:
(i) painting;
(ii) blackening (by dipping in a chemical solution);
(iii) final polishing;
(iv) branding;
(v) plating;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8203.20
8203.20
(vi) lacquering;
(vii) plastic hand grip fitting;
(viii) packaging for retail sale
Op. 15.09.1988
Dec. 05.10.1989
- TC 8905614
TWEEZERS
Op. 04.01.1991
Dec. 21.03.1991
- TC 9100913
PLIERS/PINCERS, cable or wire stripping
Op. 16.09.1992
Dec. 17.12.1992
- TC 9209039
8203.20.00
PLIERS, being ANY of the following:
(a) aviation slip pliers;
(b) bent nose pliers;
(c) combination pliers, length NOT less than 210 mm;
(d) cutting pliers;
(e) end nipper pliers;
(f) groove joint pliers;
(g) linesman pliers, length NOT less than 210 mm;
(h) lock grip pliers;
(i) long nose pliers;
(j) long reach pliers;
(k) round nose pliers;
(l) slip joint pliers;
(m) snap ring pliers;
(n) straight nose pliers;
(o) welding clamp pliers;
(p) wire stripper pliers
Op. 17.12.2008
Dec. 27.03.2009
- TC 0844180
8203.20.00
KITS, TENSIONING AND JOINING, FENCE AND/OR TRELLIS WIRE,
comprising BOTH of the following:
(a) wire tensioning and joining tool;
(b) wire gripping connectors
Op. 23.06.2008
Dec. 12.09.2008
- TC 0813999
8203.20.00
PLIERS, finger ring cutting, incorporating an abrasive cutting
wheel
Op. 07.01.1994
Dec. 15.04.1994
- TC 9401225
8203.20.00
PLIERS, long nose, carbon steel, having a length of 150 mm
Op. 17.01.1994
Dec. 22.04.1994
- TC 9401348
8203.20.00
NIPPERS, diagonal cutting, carbon steel, having a length of 150 mm
Op. 17.01.1994
Dec. 22.04.1994
- TC 9401349
8203.20.00
PLIERS OR CUTTERS, insulated, complying with IEC 900 standard,
tested to 10 000 V
Op. 25.01.1994
Dec. 06.05.1994
- TC 9402008
8203.20.00
PLIERS, spring loaded with insulated handles, being ANY of the
following:
(a) needle nosed pliers, length NOT exceeding 153 mm;
(b) long nose pliers, length NOT exceeding 135 mm;
(c) bent nose pliers, length NOT exceeding 125 mm;
(d) end nippers, length NOT exceeding 115 mm;
(e) flat nose pliers, length NOT exceeding 125 mm;
(f) round nose pliers, length NOT exceeding 100 mm;
(g) combination pliers, length NOT exceeding 165 mm;
Op. 13.01.1999
Dec. 18.06.1999
- TC 9900286
8203.20.00
PLIERS, being EITHER of the following:
(a) multiple slip joint;
(b) pliers NOT exceeding 170 mm in length
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 16.08.2001
8203.20.00
8203.30
8203.30
Dec. 11.12.2001
- TC 0107155
PULLERS AND/OR EXTRACTORS, HAND TOOL
Op. 14.03.2003
Dec. 26.05.2004
- TC 0405018
CUTTERS, wire, shear action
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341690
NIBBLERS, sheet metal
Op. 06.12.1983
- TC 8341811
Dec. 06.12.1983
8203.30.00
NIPPERS, diagonal, spring loaded with insulated handles, length NOT
exceeding 125 mm
Op. 13.01.1999
Dec. 26.03.1999
- TC 9900293
8203.40
CUTTERS, pipe, adjustable, being EITHER of the following types:
(a) hinged, having a cutting capacity of 33 mm or greater;
(b) rotary, having a cutting capacity of 140 mm or greater
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341686
8203.40
CUTTERS, internal, capable of cutting tubing having an ID in
the range of 31 mm to 102 mm (both inclusive)
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341688
8203.40
PUNCHES, leather, but NOT including round hollow punches having
a dia in the range of 1.5 mm to 12.7 mm (both inclusive)
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341727
8203.40
PUNCHES, sheet metal, hand held key operated
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341728
PUNCHES, single hole, hand operated, stationery
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341729
8203.40
8203.40
CUTTERS, cable, capable of cutting metal cable having a dia of
8.7 mm or greater
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341777
8203.40
DEHEADERS, steel drum
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341781
8203.40
CUTTERS, metal cable, cutting capacity 8.7 mm or greater
Op. 02.10.1984
Dec. 02.10.1984
- TC 8434669
8203.40
CUTTERS, pipe or tube, but NOT including pipe cutters capable
of cutting galvanised or steel pipe within the range 12 mm to
50 mm outside diameter (both inclusive)
Op. 25.08.1989
Dec. 23.01.1990
- TC 8906117
8203.40.00
BOLT OR PIPE OR TUBE CUTTERS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302775
KEYS, allen or hexagon, dia exceeding 12 mm
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341684
8204.11
8204.11
SPANNERS OR WRENCHES, slogging, incorporating a striking face
for hammer tightening, but NOT including such spanners or wrenches
put up in packs with goods OTHER THAN such spanners or wrenches
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341740
8204.11
SPANNERS OR WRENCHES, crowfoot, of the flare nut or open end
type, but NOT including spanners or wrenches put up in packs
with goods OTHER THAN crowfoot spanners or wrenches of the flare
nut or open end type
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 28.05.1985
Dec. 28.05.1985
- TC 8532092
8204.11
SPANNERS OR WRENCHES, hook or pin type, but NOT including such
spanners or wrenches put up in packs containing goods OTHER THAN
such spanners or wrenches
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532096
8204.11
SPANNERS OR WRENCHES, flare nut, including combination type, but
NOT including ANY of the following:
(a) spanners or wrenches put up in packs containing goods OTHER
THAN flare nut spanners or wrenches including combination
type;
(b) spanners or wrenches having an opening at one or both ends
in the following sizes:
(i) SAE or AF : 3/8 in. to 3/4 in. (both inclusive),
7/8 in., 1 in. or 1 1/8 in.;
(ii) Metric
: 9 mm to 15 mm (both inclusive), or 17 mm
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532102
8204.11
SPANNERS, tubular, double ended, but NOT including ANY of the
following:
(a) spanners put up in packs with goods OTHER THAN tubular
spanners;
(b) spanners or packs containing spanners, having an opening
at one or both ends in ANY of the following sizes:
(i) Whitworth : 3/16 in. to 5/8 in. (both inclusive);
(ii) Metric
: 8 mm to 19 mm (both inclusive);
(iii) SAE
: 5/16 in. to 1 1/8 in. (both inclusive)
Op. 04.06.1985
Dec. 06.06.1985
- TC 8532145
8204.11
SPANNERS OR WRENCHES, podger, construction or structural, but NOT
including spanners or wrenches put up in packs with goods OTHER
THAN podger spanners or wrenches
Op. 30.05.1985
Dec. 04.06.1985
- TC 8532149
8204.11
SPANNERS OR WRENCHES, half moon ring, but NOT including ANY of the
following:
(a) spanners or wrenches put up in packs with goods OTHER THAN
half moon ring spanners or wrenches;
(b) spanners or wrenches or packs containing spanners or
wrenches, having an opening at one or both ends in ANY of
the following sizes:
(i) SAE or AF : 1/2 in. to 5/8 in. (both inclusive);
(ii) Metric
: 10 mm to 13 mm (both inclusive);
(iii) Whitworth : 1/4 in. or 5/16 in.;
(iv) BS
: 5/16 in. or 3/8 in.
Op. 30.05.1985
Dec. 03.06.1985
- TC 8532151
8204.11
SPANNERS OR WRENCHES, open end type, but NOT including ANY of the
following:
(a) spanners or wrenches put up in packs with goods OTHER THAN
open end type spanners or wrenches;
(b) spanners or wrenches or packs containing open end type
spanners or wrenches having one or both ends in ANY of the
following sizes:
(i) SAE or AF : 7/32 in. to 1 5/8 in. (both inclusive);
(ii) Metric
: 4 mm to 27 mm (both inclusive), 30 mm,
32 mm or 36 mm;
(iii) Whitworth : 1/8 in. to 3/4 in. (both inclusive),
7/8 in. or 1 in.;
(iv) BS
: 3/16 in. to 3/4 in. (both inclusive),
7/8 in., 1 in. or 1 1/8 in.
Op. 30.05.1985
Dec. 03.06.1985
- TC 8532152
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8204.11
SPANNERS OR WRENCHES, being ANY of the types listed in TABLE A,
but NOT including ANY of the goods listed in TABLE B
TABLE A
(a) ring;
(b) combination (ring and open end);
(c) flexible head;
(d) box wrench
TABLE B
(a) spanners or wrenches put up in packs with goods OTHER THAN
those listed in TABLE A;
(b) spanners or wrenches or packs containing spanners or
wrenches having one or both ends in ANY of the following
sizes:
(i) SAE or AF : 7/32 in. to 1 7/8 in. (both inclusive),
2 in. to 2 1/4 in. (both inclusive),
2 3/8 in., 2 1/2 in., 2 5/8 in.,
2 3/4 in., 2 15/16 in. or 3 1/8 in.;
(ii) Metric
: 4 mm to 28 mm (both inclusive),
30 mm, 32 mm, 36 mm, 38 mm, 41 mm, 46 mm,
50 mm or 55 mm;
(iii) Whitworth : 1/8 in. to 3/4 in. (both inclusive),
7/8 in., 1 in. or 1 1/8 in.;
(iv) BS
: 3/16 in. to 3/4 in. (both inclusive),
7/8 in., 1 in., 1 1/8 in. or 1 1/4 in.
Op. 30.05.1985
Dec. 05.06.1985
- TC 8532153
8204.11
SPANNERS OR WRENCHES, ratcheting box (ring) type, having hexagonal
or bi-hexagonal ratcheting box (ring) type openings at both ends,
but NOT including spanners or wrenches put up in packs with goods
OTHER THAN ratcheting box (ring) type spanners or wrenches
Op. 30.05.1985
Dec. 03.06.1985
- TC 8532156
8204.11
TOOLS, hand, non-sparking, composed wholly (except for handles,
if any) of beryllium copper
Op. 06.11.1987
Dec. 24.05.1988
- TC 8735139
8204.11
KEYS, torx recess type
Op. 24.06.1988
8204.11.00
- TC 8805912
SPANNERS OR WRENCHES, being ANY of the types listed in TABLE A,
but NOT including ANY of the goods listed in TABLE B
TABLE A
(a) ring;
(b) combination (ring and open end);
(c) flexible head;
(d) open end
TABLE B
(a) spanners or wrenches put up in packs with goods other than
those listed in TABLE A;
(b) spanners or wrenches or packs containing spanner or wrenches
having one or both ends in ANY of the following sizes:
(i) SAE or AF : 7/32" to 1.5/8" (both inclusive);
(ii) METRIC
: 4 mm to 28 mm (both inclusive) 30 mm, 32 mm
(iii) WHITWORTH:
(iv) BS
:
Op. 11.08.1993
8204.11.00
Dec. 22.09.1988
36 mm;
1/8" TO 1" (both inclusive);
2BA, 1/4" to 1.1/8" (both inclusive)
Dec. 12.11.1993
- TC 9307351
WRENCHES, torque, hexagon, in the following diameter sizes:
0.71 mm;
0.89 mm;
1.27 mm;
1.50 mm;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
2.00 mm;
2.50 mm
Op. 16.03.1993
Dec. 02.07.1993
- TC 9308756
8204.11.00
SPANNERS OR WRENCHES, insulated, complying with IEC 900 standard,
tested to 10 000 V
Op. 25.01.1994
Dec. 06.05.1994
- TC 9402007
8204.11.00
NUTDRIVERS, SAE or AF, in ANY of the following sizes:
(a) 3/16" (5 mm);
(b) 1/4" (6 mm);
(c) 5/16" (8 mm);
(d) 11/32" (9 mm);
(e) 3/8" (10 mm);
(f) 7/16" (11 mm);
(g) 1/2" (13 mm)
Op. 25.07.1994
Dec. 11.11.1994
- TC 9406322
8204.11.00
TORQUE WRENCHES, dial indicating, having ANY of the following head
attachments:
(a) fixed square drive;
(b) ratchet square drive
Op. 14.02.1995
Dec. 01.06.1995
- TC 9501949
8204.11.00
SPANNERS, drop forged
Op. 02.12.1998
Dec. 05.02.1999
- TC 9810512
8204.11.00
SPANNERS AND WRENCHES, non adjustable, being ANY of the following:
(a) combination open end and ring;
(b) open end;
(c) ring
Op. 16.08.2001
Dec. 02.11.2001
- TC 0107157
8204.11.00
SPANNERS OR WRENCHES, hand operated, non adjustable
Dec. 06.06.2003
- TC 0302749
Op. 14.03.2003
8204.11.00
HAND TOOLS, being EITHER of the following:
(a) allen key sets;
(b) hex keys
Op. 14.03.2003
Dec. 26.05.2004
- TC 0405019
8204.12
WRENCHES, lever, of the clamp, plier or vice type, but NOT
including oil filter wrenches
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341738
8204.12
SPANNERS, plumbers, basin, incorporating replaceable jaws and
swivelling handles, but NOT including such spanners put up in
packs with goods OTHER THAN such spanners
Op. 30.05.1985
Dec. 03.06.1985
- TC 8532150
8204.12
WRENCHES, pipe, adjustable, being ANY of the following:
(a) offset, having a jaw opening parallel to the handle;
(b) vertical, being wrenches which do NOT incorporate a handle
but have provision to accept, as a handle, a 1/2 in.
(12.7 mm) square rod or a 1/2 in. (12.7 mm) drive socket
wrench handle;
(c) compound leverage, being wrenches which incorporate ALL of
the following:
(i) threaded adjustment of the jaw opening;
(ii) chain pipe clamp;
(iii) a compound leverage handle
Op. 09.07.1985
Dec. 09.07.1985
- TC 8532899
8204.12
SPANNERS OR WRENCHES, being ANY of the types listed in TABLE A,
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
but NOT including ANY of the goods listed in TABLE B
TABLE A
(a) ring;
(b) combination (ring and open end);
(c) flexible head;
(d) box wrench
TABLE B
(a) spanners or wrenches put up in packs with goods OTHER THAN
those listed in TABLE A;
(b) spanners or wrenches or packs containing spanners or
wrenches having one or both ends in ANY of the following
sizes:
(i) SAE or AF : 7/32 in. to 1 7/8 in. (both inclusive),
2 in. to 2 1/4 in. (both inclusive),
2 3/8 in., 2 1/2 in., 2 5/8 in.,
2 3/4 in., 2 15/16 in. or 3 1/8 in.;
(ii) Metric
: 4 mm to 28 mm (both inclusive),
30 mm, 32 mm, 36 mm, 38 mm, 41 mm, 46 mm,
50 mm or 55 mm;
(iii) Whitworth : 1/8 in. to 3/4 in. (both inclusive),
7/8 in., 1 in. or 1 1/8 in.;
(iv) BS
: 3/16 in. to 3/4 in. (both inclusive),
7/8 in., 1 in., 1 1/8 in. or 1 1/4 in.
Op. 01.01.1988
Dec. 01.01.1988
- TC 8534480
8204.12
WRENCHES, toggle action, having BOTH of the following:
(a) locking jaw mechanism;
(b) jaw release mechanism
Op. 01.01.1988
Dec. 01.01.1988
- TC 8735365
8204.12
SPANNERS OR WRENCHES, hook or pin type, but NOT including such
spanners or wrenches put up in packs containing goods OTHER THAN
such spanners or wrenches
Op. 01.01.1988
Dec. 01.01.1988
- TC 8803110
8204.12
WRENCHES, adjustable, but NOT including ANY of the following:
(a) pipe wrenches having a length of 850 mm or less, which
incorporate a threaded adjustment for the jaw opening;
(b) adjustable wrenches (OTHER THAN of the kind described in
(a) above) having a length of 125 mm or less;
(c) oil filter wrenches;
(d) torque wrenches
Op. 17.06.1991
Dec. 17.06.1991
- TC 9104505
8204.12.00
SPANNERS, adjustable, insulated, complying with IEC 900 standard,
tested to 10 000 V
Op. 25.01.1994
Dec. 06.05.1994
- TC 9402009
8204.12.00
WRENCHES, torque, digital, having ALL of the following:
(a) interchangeable head system;
(b) LED readout;
(c) capable of storing, recalling and displaying measured torque
values in internal memory;
(d) RS232C input/output port
(e) accuracy better than + 1% plus, 1 digit of each measured
value
but NOT including torque wrenches of the following types:
(i) ratchet deflection beam type;
(ii) ratchet type dual signal.
Op. 26.10.1994
Dec. 23.02.1995
- TC 9408549
8204.12.00
SPANNERS AND WRENCHES, adjustable, non calibrated
Op. 16.08.2001
Dec. 21.11.2001
Item 50 applies unless otherwise stated.
- TC 0110440
Tariff
Description
===========================================================================
8204.12.00
WRENCHES, ADJUSTABLE
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302750
8204.20
HANDLES FOR SOCKETS, 6.35 mm (1/4 in.) drive, whether imported
separately or as a set consisting solely of such handles
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341701
8204.20
SPANNERS OR WRENCHES, crowfoot, of the flare nut or open end type,
but NOT including such spanners or wrenches put up in packs
containing goods OTHER THAN crowfoot spanners or wrenches of
flare nut or open end type
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532103
8204.20.00
SPANNER SOCKET SETS, having BOTH of the following:
(a) NOT less than six sockets;
(b) ratchet handle,
and NOT less than one of the following:
(i) bit;
(ii) bit holder;
(iii) wrench;
(iv) universal joint;
(v) extension bar;
(vi) bit socket;
(vii) hex key;
(viii) bit driver
Op. 11.12.2008
Dec. 25.03.2009
- TC 0843479
8204.20.00
SOCKETS AND/OR SOCKET ACCESSORIES, being ANY of the following:
(a) sockets;
(b) reducers;
(c) tommy bars with sliding T (T handles);
(d) extensions;
(e) ratchets with coupler;
(f) reversible ratchets;
(g) couplers;
(h) universal joints;
(i) L-handles;
(j) speed braces;
(k) converters;
(l) swivel handles;
(m) driving handles (socket drivers);
(n) ratchet adaptors
Op. 01.11.2000
Dec. 05.01.2001
- TC 0009108
8204.20.00
INTERCHANGEABLE SPANNER SOCKETS, with OR without handles
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302751
8205.10
GIMLETS
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341793
WRENCHES, tap, bar type
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341865
8205.10
8205.10.00
8205.10.00
DRILLING TOOLS, HAND AND/OR BIT BRACE RATCHET
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302776
TAP WRENCHES, HAND TOOL
Op. 14.03.2003
- TC 0406336
Dec. 28.06.2004
8205.20
HAMMERS, panel beaters", OTHER THAN ball pein or leather face
hammers
Op. 17.01.1986
Dec. 17.01.1986
- TC 8534984
8205.20
HAMMERS, non-sparking, composed wholly (except for handles, if
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
any) of beryllium copper
Op. 10.09.1987
Dec. 09.09.1988
- TC 8734619
8208.20.00
KNIVES, WOOD SAW MACHINE, being EITHER of the following:
(a) chipping knives;
(b) edging knives
Op. 26.11.2010
Dec. 28.02.2011
- TC 1052172
8208.20.00
BLADES, log peeling machine
Op. 09.06.2010
Dec. 30.08.2010
- TC 1025828
8208.20.00
BLADES, PLANER, double edged, tungsten carbide tipped
Op. 08.04.2009
Dec. 29.06.2009
- TC 0911985
8205.20.00
HAMMERS AND/OR AXES, DRYWALL, handheld
Op. 25.03.2009
Dec. 19.06.2009
- TC 0910417
8205.20.00
HANDLES, HAMMER, IMPACT ABSORBING, comprising BOTH of the
following:
(a) rubber moulded outer skin;
(b) internal steel wire core
Op. 24.06.2008
Dec. 12.09.2008
- TC 0814218
8205.20.00
HAMMERS, reboundless
Op. 22.04.1993
Dec. 23.07.1993
- TC 9305328
8205.20.00
MALLETS AND HAMMERS having ALL of the following:
(a) coiled leather head NOT exceeding 70 mm diameter;
(b) wooden handle;
(c) able to strike sharpened cutting edges without splitting;
(d) not including mallets with changeable or replaceable tips
Op. 21.12.1992
Dec. 04.06.1993
- TC 9308641
8205.20.00
HAMMERS OR SLEDGE HAMMERS OR MALLETS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302752
SHAVES OR SPOKESHAVES
Op. 25.05.1984
- TC 8431720
8205.30
Dec. 17.07.1984
8205.30
PLANES, wholly or principally of metal (but NOT including size
No. 4 or equivalent smooth planes, whether smooth or corrugated
bottom)
Op. 16.09.1985
Dec. 06.01.1986
- TC 8534384
8205.30
CHISELS, wood carving, NOT being chisels having BOTH of the
following:
(a) rectangular blade cross-section;
(b) cutting edge at 90 degrees to blade length
Op. 23.12.1987
Dec. 24.05.1988
- TC 8803207
8205.30.00
CHISELS, WOODWORKING, but NOT including wood turning chisels AND
all steel wood chisels
Op. 03.12.2013
Dec. 07.04.2014
- TC 1340109
8205.30.00
PLANES
Op. 23.08.2013
Dec. 17.10.2013
- TC 1334735
8205.40
SCREWDRIVERS, offset, being screwdrivers which have the blade at
an angle of 90 degrees to the body or handle
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341825
8205.40
SCREWDRIVERS, having 4 shoulders in parallel, capable of
preventing "slipping" or "riding up" under torque
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341828
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8205.40
8205.40
8205.40
SCREWDRIVERS, torque limiting
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341829
SCREWDRIVERS, spiral ratchet type
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341831
KEYS, torx recess type, and sets thereof
Op. 02.07.1987
Dec. 28.04.1989
- TC 8734010
8205.40
SCREWDRIVERS, OTHER THAN allen, pozidriv, phillips or slotted
head types
Op. 10.11.1987
Dec. 26.08.1988
- TC 8735318
8205.40
SCREWDRIVERS, non-sparking, composed wholly (except for
handles, if any) of beryllium copper
Op. 10.09.1987
Dec. 15.09.1988
- TC 8807082
8205.40
SCREWDRIVERS, torx recess type
Op. 01.01.1988
Dec. 22.09.1988
- TC 8807169
8205.40
SCREWDRIVERS, slotted head type with a tip width less than 3 mm,
or recessed head type with a blade point size less than zero point
Op. 21.10.1988
Dec. 23.12.1988
- TC 8809192
8205.40.00
POLES, DRILL, telescopic
Op. 18.02.2016
Dec. 02.05.2016
- TC 1607519
8205.40.00
SETS, SCREWDRIVER, comprising ALL of the following:
(a) Phillips head screwdrivers;
(b) flat blade screwdrivers;
(c) cases or hanging racks
Op. 27.05.2008
Dec. 08.08.2008
- TC 0810248
8205.40.00
SCREWDRIVERS
Op. 16.12.2008
Dec. 06.03.2009
- TC 0844020
8205.40.00
SCREWDRIVERS, ball point or ball end, plastic handle, steel shaft
and blade
Op. 17.11.1993
Dec. 04.03.1994
- TC 9313251
8205.40.00
SCREWDRIVERS, insulated, phillips or flat blade, complying with
IEC 900 standard, tested to 10 000 V
Op. 25.01.1994
Dec. 06.05.1994
- TC 9402011
8205.40.00
SCREWDRIVER SETS, being ANY of the following:
(a) single handle and at least 3 interchangeable flat blade bits
and 2 interchangeable Phillips head bits; OR
(b) 6 screwdrivers comprising 2 or more Phillips head screwdrivers
3 mm or less in width and 3 or more flat blade screwdrivers
3.5 mm or less in width; OR
(c) 8 screwdrivers, insulated to 1 000 V, comprising flat blade
screwdrivers of 6 mm, 5 mm, 4 mm and 2.5 mm in width and 3
Phillips head screwdrivers
Op. 19.10.1995
Dec. 02.02.1996
- TC 9511383
8205.40.00
CARE KITS, SUNGLASSES, comprising ALL of the following:
(a) screwdriver;
(b) lens cleaning cloth;
(c) cleaning fluid;
(d) plastic case
Op. 17.12.2002
Dec. 14.03.2003
- TC 0211902
8205.51
BALLERS, melon
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8205.51
8205.51
8205.51
8205.51.00
8205.51.00
8205.51.00
8205.51.00
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341762
STEELS, knife sharpening
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341838
SERVERS, ice-cream
Op. 29.06.1987
Dec. 17.11.1987
- TC 8733826
CAN OPENER with corkscrew attachment
Op. 17.12.1990
Dec. 12.06.1991
- TC 9100366
HOUSEHOLD TOOLS, CAKE LEVELLER AND SLICER
Op. 30.01.2014
Dec. 23.04.2014
- TC 1404450
SLICERS, FOOD, having BOTH of the following:
(a) plastic body;
(b) metal blades
Op. 19.06.2013
Dec. 02.09.2013
- TC 1320352
CHIPPERS, POTATO
Op. 17.05.2013
Dec. 05.08.2013
HOUSEHOLD TOOLS, being ANY of the following:
(a) whisks;
(b) graters;
(c) food scoops;
(d) ice cream scoops;
(e) vegetable peelers;
(f) garlic presses;
(g) lemon presses or squeezers;
(h) meat hammers;
(i) pizza cutters;
(j) food slicing guides
Op. 19.02.2013
Dec. 18.04.2013
- TC 1316284
- TC 1313175
8205.51.00
HOUSEHOLD TOOLS, being a combined apple corer AND wedger
Op. 09.10.2012
Dec. 27.12.2012
- TC 1238296
8205.51.00
HOUSEHOLD TOOLS, being a combination grater AND zester AND juicer
Op. 25.01.2012
Dec. 16.04.2012
- TC 1202951
8205.51.00
HOUSEHOLD TOOLS, being garlic presses incorporating a slicer
Op. 28.09.2011
Dec. 04.01.2012
- TC 1133088
8205.51.00
HOUSEHOLD TOOLS, having a metal working edge OR surface, being
ANY of the following:
(a) corn cob strippers;
(b) strawberry slicers;
(c) strawberry stem removers;
(d) potato and/or rice presses;
(e) avocado slicers;
(f) bean slicers
Op. 29.04.2010
Dec. 19.07.2010
- TC 1019457
8205.51.00
SETS, COOKIE CUTTER, consisting of NOT less than 3 metal cutters
Op. 25.02.2010
Dec. 07.05.2010
- TC 1009893
8205.51.00
CUTTERS, COOKIE AND/OR SCONE
Op. 22.02.2010
Dec. 07.05.2010
- TC 1009268
HOUSEHOLD TOOLS, SOFT FRUIT SLICER
Op. 22.02.2010
Dec. 07.05.2010
- TC 1009265
8205.51.00
8205.51.00
HOUSEHOLD TOOLS, being ANY of the following:
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(a) can openers;
(b) graters;
(c) peelers
Op. 18.02.2010
Dec. 07.05.2010
- TC 1008759
8205.51.00
CHRISTMAS TREE COOKING KIT, comprising ALL of the following:
(a) wooden base;
(b) wooden stems;
(c) biscuit or cookie cutters;
(d) piping bag
Op. 22.10.2009
Dec. 04.01.2010
- TC 0939734
8205.51.00
HOUSEHOLD TOOLS, being zesters
Op. 08.07.2009
Dec. 18.09.2009
- TC 0923927
UTENSILS, being EITHER of the following:
(a) mashers;
(b) whisks
Op. 25.09.2007
Dec. 13.06.2008
- TC 0812043
SNUFFERS, CANDLE, base metal
Op. 08.07.2008
Dec. 26.09.2008
- TC 0816567
8205.51.00
8205.51.00
8205.51.00
SETS, KITCHEN TOOLS, base metal, comprising NOT less than any
three of the following:
(a)whisk;
(b)masher;
(c)spatula;
(d)meat tenderiser;
(e)egg flip or egg turner
Op. 08.07.2008
Dec. 26.09.2008
- TC 0816585
8205.51.00
BOTTLE OPENERS, other than diecast, made from EITHER of the
following:
(a) plastic and stainless steel;
(b) stainless steel
Op. 29.07.2008
Dec. 17.10.2008
- TC 0823645
8205.51.00
CUTTERS, POLYVINYL CHLORIDE FILM, hand operated, comprising BOTH
of the following:
(a) sliding head with metal cutting blade;
(b) self adhesive strip
Op. 10.10.2008
Dec. 14.01.2009
- TC 0834899
8205.51.00
HOUSEHOLD TOOLS, being ANY of the following:
(a) apple corers;
(b) egg slicers;
(c) egg cutters;
(d) jar openers;
(e) knife sharpeners;
(f) nut crackers;
(g) tea bag squeezers
Op. 29.10.2008
Dec. 16.01.2009
- TC 0837715
COOKIE CUTTERS
Op. 08.12.2008
- TC 0842988
8205.51.00
Dec. 27.02.2009
8205.51.00
HOUSEHOLD TOOLS, hand operated bottle opener, comprising cork screw,
knife or foil cutter and self adjusting flexible lever
Op. 28.05.1993
Dec. 10.09.1993
- TC 9305091
8205.51.00
BOTTLE OPENER, with cork screw and knife attachments
Op. 02.04.1993
Dec. 28.10.1993
- TC 9309052
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8205.51.00
FIRESIDE TOOL SETS, black finish, having ALL of the following:
(a) hearth brush;
(b) poker;
(c) shovel;
(d) tool stand
Op. 27.04.1995
Dec. 22.08.1995
- TC 9505187
8205.51.00
TOOLS, MULTI-PURPOSE, incorporating a number of different working
attachments which fold or insert into the housing
Op. 24.07.1995
Dec. 27.11.1995
- TC 9509593
8205.51.00
SLICERS, CHEESE, having BOTH of the following:
(a) stainless steel slotted blade;
(b) handle
Op. 02.10.1995
Dec. 07.01.1996
- TC 9511022
SHREDDERS OR GRATERS, CHEESE, having BOTH of the following:
(a) stainless steel perforated blade;
(b) handle
Op. 02.10.1995
Dec. 07.01.1996
- TC 9511023
8205.51.00
8205.51.00
SHARPENERS, KNIFE, being industrial diamond coated steel sharpening
fingers, with OR without stabilising handles and safety hand guards
Op. 15.07.2002
Dec. 04.10.2002
- TC 0206192
8205.51.00
SHARPENERS, KNIFE AND HAND TOOL, having concave composite steel
blade with two sharpening edges bonded into an aluminium
handle
Op. 14.05.2003
Dec. 01.08.2003
- TC 0305685
8205.51.00
SHARPENERS, KITCHEN KNIVES, comprising ANY of the following:
(a) tungsten carbide knife edge restorers;
(b) diamond coated steel sharpening fingers;
(c) hardened stainless steel honing fingers
Op. 21.05.2004
Dec. 30.07.2004
- TC 0404929
8205.51.00
EXTRACTORS, CORK, having BOTH of the following:
(a) dual spikes;
(b) hinged handles
Op. 24.06.2004
Dec. 03.09.2004
- TC 0406258
DRIVERS, impact, screw or nut
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341752
AWLS
Op. 06.12.1983
- TC 8341761
8205.59
8205.59
Dec. 06.12.1983
8205.59
CLEANERS, paint brush or paint roller, incorporating mechanisms
for holding and rotating the brush or roller
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341773
8205.59
CUTTERS, tile
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341780
DRESSERS, grinding wheel
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341783
PENS, etching, tungsten carbide tipped
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341787
KEYS, drill chuck
Op. 06.12.1983
- TC 8341803
8205.59
8205.59
8205.59
8205.59
Dec. 06.12.1983
KNIVES, being ANY of the following:
(a) artists" painting;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(b) paint scraping OR stripping;
(c) putty OR filling;
(d) scoring, interior decorating or wallpapering
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341804
8205.59
EXTRACTORS, lamp
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341806
8205.59
NAILERS, magazine fed, operated by striking the nailer pin with
a mallet, capable of using staples or T-nails having a length
of 25 mm or greater
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341810
8205.59
RATCHET HANDLES, for imparting leverage at a 90 degrees angle to
screwdrivers incorporating a hexagonal nut
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341820
8205.59
REMOVERS, staple
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341823
8205.59
SHAPERS OR SWAGES, bandsaw, gang saw or circular saw
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341833
8205.59
SPLITTERS, metal nut
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341836
RESTORERS, thread pitch
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341841
8205.59
8205.59
TOOLS, chain breaker, bicycle or motorcycle
Op. 07.02.1983
Dec. 07.02.1983
- TC 8341843
8205.59
TOOLS, jewellers", but NOT including ANY of the following:
(a) ring setting plates or punches;
(b) doming or swaging blocks;
(c) mandrels;
(d) ring bending tools;
(e) swage bars
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341854
8205.59
GUNS, mastic dispensing
Op. 07.02.1984
8205.59
8205.59
8205.59
Dec. 07.02.1984
- TC 8341857
STRAIGHT EDGES, painting or wallpapering
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341858
PICKERS, textile
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341860
TOOLS, chainsaw chain repairing
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341868
8205.59
TOOLS, flat strapping, including tools which tension and seal
the strapping, but NOT including wire tying tools
Op. 23.01.1984
Dec. 23.01.1984
- TC 8430215
8205.59
TOOLS, leather working
Op. 02.04.1984
Dec. 12.06.1984
- TC 8430267
8205.59
BENDERS, tube, being a tool body with interchangeable bending
jigs and formers
Op. 09.10.1984
Dec. 05.07.1985
- TC 8433269
8205.59
TOOLS, bending, metal bar, rod or tube, mechanical lever type
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 31.01.1985
Dec. 31.01.1985
- TC 8530333
8205.59
SETTING TOOLS, saw, but NOT including setting tools for bandsaws
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532095
8205.59
TOOLS, crimping, electrical connector, but NOT including such
tools put up in packs containing electrical connectors
Op. 27.05.1985
Dec. 27.05.1985
- TC 8532100
8205.59
GUNS, ear piercing, but NOT including such goods imported with
ear studs
Op. 30.05.1985
Dec. 03.06.1985
- TC 8532155
8205.59
TOOLS, engraving or etching, metal printing plate making
Op. 25.03.1986
Dec. 13.06.1986
- TC 8632910
8205.59
TOOLS, cleaving, optical glass fibre
Op. 24.06.1986
Dec. 04.12.1986
- TC 8634319
PUNCHES, alpha or numeric
Op. 08.04.1985
- TC 8733096
8205.59
Dec. 15.04.1987
8205.59
TROWELS, brick, (NOT being rectangular OR square trowels), steel
blade, blade length 250 mm or greater
Op. 20.05.1987
Dec. 23.09.1987
- TC 8733892
8205.59
TOOLS, locksmiths", being ANY of the following:
(a) lock picks;
(b) key extractors;
(c) tension tools;
(d) plug holders;
(e) plug followers;
(f) car opening tools (commonly known as Slim Jims)
Op. 15.09.1987
Dec. 29.01.1988
- TC 8734672
8205.59
TOOLS, combination, containing ALL of the following within
a single body:
(a) awl;
(b) can/bottle opener;
(c) combination plier;
(d) file;
(e) knife blade;
(f) screwdriver blades
Op. 07.10.1987
Dec. 12.02.1988
- TC 8735252
8205.59
GLASS CUTTERS
Op. 06.11.1987
Dec. 23.05.1988
- TC 8735280
8205.59
TOOLS put up in packs, provided that ALL components of those packs
are individually goods to which Item 50 in Schedule 4 to the
Customs Tariff Act 1987 would apply by virtue of Commercial
Tariff Concession Orders made under Part XVA of the Customs Act
Op. 11.02.1988
Dec. 02.05.1988
- TC 8801474
8205.59
STEELS, knife sharpening
Op. 01.01.1988
Dec. 01.01.1988
- TC 8802956
8205.59
TOOLS, hand, non-sparking, composed wholly (except for handles,
if any) of beryllium copper
Op. 10.09.1987
Dec. 24.05.1988
- TC 8803098
8205.59
TOOLS, carpet or linoleum laying, being ANY of the following:
(a) awls, carpet;
(b) boxes, mitre;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(c) clamps, carpet;
(d) claws, pulling;
(e) cutters:
(i) carpet;
(ii) cookie;
(iii) cushion back;
(iv) cushion lock;
(v) loop pile;
(vi) seam;
(vii) strip;
(f) cutting and hammering tools;
(g) door pin tools;
(h) driving bars, magnetic;
(i) groovers;
(j) hammers, staple;
(k) kickers, knee;
(l) lifters, moulding;
(m) removers, staple;
(n) repair tools, instant;
(o) rollers:
(i) extendable;
(ii) lino;
(iii) seam;
(iv) wall;
(p) spreaders, carpet;
(q) squeezers, seam;
(r) stair tools;
(s) stretcher tools;
(t) strippers, floor;
(u) supports, corner;
(v) tack holders, magnetic;
(w) trimmers:
(i) bar;
(ii) carpet;
(iii) corner;
(iv) tucking;
(v) wall;
(x) trowels, stand up;
(y) tubes for stretchers, auto-lock;
(z) turning tools
Op. 20.10.1988
Dec. 12.01.1989
- TC 8809179
8205.59
TOOLS, tungsten tipped being EITHER of the following:
(a) points;
(b) pitching tools
Op. 23.08.2013
Dec. 18.10.2013
- TC 1334964
8205.59
TOOLS, riveting, but NOT including riveting tools suitable for
smooth stemmed blind rivets which have a diameter within the
range of 3.175 mm to 6.350 mm (both inclusive)
Op. 01.01.1988
Dec. 22.01.1990
- TC 8909080
8205.59
BLACKHEAD REMOVERS
Op. 04.01.1991
Dec. 21.03.1991
- TC 9100910
8205.59
TOOLS, deburring with interchangeable cutting blade
Op. 11.01.1991
Dec. 11.06.1991
- TC 9101181
8205.59
APPLICATORS, hand held, adhesive tape dispensing, incorporating
a metal cut off blade
Op. 14.01.1992
Dec. 13.08.1992
- TC 9204771
8205.59
STRIPPERS, coaxial wire and cable
Op. 16.09.1992
Dec. 17.12.1992
Item 50 applies unless otherwise stated.
- TC 9209037
Tariff
Description
===========================================================================
8205.59
8205.59
TOOLS, cable and wire stripping, clam-shell type
Op. 16.09.1992
Dec. 17.12.1992
- TC 9209038
STRIPPING TOOL, cable and wire, pistol grip
Op. 16.09.1992
Dec. 17.12.1992
- TC 9209040
8205.59.00
SQUEEZING TOOLS, POLYETHYLENE PIPE, having a rounding capacity
diameter NOT less than 16 mm and NOT greater than 63 mm
Op. 29.03.2016
Dec. 15.06.2016
- TC 1611613
8205.59.00
ROUNDING TOOLS, mechanical, galvanized steel, including ALL of
the following:
(a) threaded tree rods;
(b) open-end wrenches;
(c) nuts;
(d) carry bag
Op. 30.12.2015
Dec. 06.04.2016
- TC 1600022
8205.59.00
EXTERNAL BEAD REMOVERS, POLYETHYLENE PIPE HAVING AN OUTSIDE
DIAMETER NOT EXCEEDING 630 MM
Op. 30.12.2015
Dec. 05.04.2016
- TC 1600020
8205.59.00
SQUEEZING TOOLS, POLYETHYLENE PIPE, having a rounding capacity
diameter NOT less than 20 mm and NOT greater than 63 mm
Op. 21.12.2015
Dec. 17.03.2016
- TC 1545579
8205.59.00
SCRAPERS, PIPE END, having NOT less than five of the following:
(a) threaded spindles, with OR without cross handles AND/OR
adjustment knobs;
(b) length setting catches;
(c) piloting arm carriers;
(d) piloting arm having a cylindrical handles;
(e) blade holders AND blades;
(f) scraper blades;
(g) tensioning heads;
(h) cylindrical heads;
(i) star knobs
Op. 17.08.2015
Dec. 02.11.2015
- TC 1531950
8205.59.00
SCRAPERS, including high carbon steel blades
Op. 03.08.2015
Dec. 26.10.2015
- TC 1529901
PARTS, CAULKING GUN, being metal plunger discs
Op. 19.02.2015
Dec. 11.05.2015
- TC 1507244
8205.59.00
8205.59.00
HANDTOOLS, being powder actuated fasteners with OR without
magazine
Op. 30.07.2013
Dec. 21.10.2013
- TC 1325577
8205.59.00
HAND TOOLS, being ANY of the following:
(a) mitre boxes;
(b) wood and/or paint scrapers;
(c) oil cans;
(d) tackers and/or staplers;
(e) callipers;
(f) cement groovers and/or edgers;
(g) tile borers;
(h) tile cutters;
(i) floats;
(j) grout spreaders;
(k) trowels;
(l) adhesive spreaders;
(m) sanders;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(n) suction cups;
(o) hammer tackers;
(p) staple guns;
(q) plasterer's hawks;
(r) splatter guns;
(s) fibro cutters;
(t) joint rakers;
(u) tuck pointers;
(v) jointer, brick;
(w) tank and/or washer cutters;
(x) tap reseaters;
(y) honing guides;
(z) riveters;
(aa) tack lifters;
(ab) brick carriers;
(ac) brick line blocks;
(ad) grout removers;
(ae) glass cutters;
(af) chalk line reels
Op. 14.03.2003
Dec. 28.08.2013
8205.59.00
8205.59.00
TIERS, CONCRETE REINFORCING BAR
Op. 05.04.2013
Dec. 01.07.2013
PARTS, MASTIC GUN, being any of the following:
(a) reducer;
(b) reducer flange;
(c) bulkhead;
(d) bulkhead bung;
(e) bulkhead adaptor;
(f) bulkhead insert;
(g) return pusher;
(h) handle;
(i) plunger;
(j) plunger rod;
(k) drive rod;
(l) cartridge support;
(m) sleeves;
(n) frame assembly;
(o) yoke;
(p) release plate;
(q) catch plate;
(r) zinc knob;
(s) plastic cap;
(t) barrel;
(u) nozzle holder
Op. 14.09.2012
Dec. 10.12.2012
- TC 1328271
- TC 1311878
- TC 1235912
8205.59.00
SETS, FASTENING HAND TOOL, explosive charge operated
incorporating a strip magazine, including ALL of the following:
(a) safety glasses;
(b) ear plugs;
(c) allen keys;
(d) brushes;
(e) manuals;
(f) clips;
(g) steel balls;
(h) carry case
Op. 29.11.2010
Dec. 28.02.2011
- TC 1052240
8205.59.00
EXTRACTORS, FUSE REMOVAL, EXPLOSIVE ORDNANCE, including BOTH of
the following:
(a) clamping jaws;
(b) coil spring and latch cable drums
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 02.04.2009
Dec. 26.06.2009
- TC 0911262
8205.59.00
WRENCH LEVER KITS, FUSE REMOVAL, EXPLOSIVE ORDNANCE, including
ALL of the following:
(a) mounting frames;
(b) cable reels;
(c) cable pullers;
(d) canvas equipment holdall
Op. 02.04.2009
Dec. 26.06.2009
- TC 0911258
8205.59.00
HAND TOOLS, being ANY of the following:
(a) battery terminal cleaners;
(b) brake adjustment tools;
(c) door clip and spring removers;
(d) grease guns;
(e) piston ring compressors;
(f) pickup tools;
(g) tie rod end separators;
(h) valve lifters;
(i) windscreen removers
Op. 19.03.2009
Dec. 12.06.2009
- TC 0909454
TUBE CONNECTORS
Op. 13.09.2005
- TC 0512185
8205.59.00
Dec. 25.11.2005
8205.59.00
TOOLS, GRABBING, REACHING AND RETRIEVING, comprising BOTH of the
following:
(a) jaws or magnet grippers;
(b) squeeze handles or triggers or scissor controls
Op. 21.11.2006
Dec. 09.02.2007
- TC 0618737
8205.59.00
TOOLS, repair, tyre valve or tube
Op. 08.02.1993
Dec. 14.05.1993
- TC 9308223
8205.59.00
PULLERS, being extracting tools, whether OR not in sets
Op. 22.11.1993
Dec. 04.03.1994
- TC 9313309
8205.59.00
TOOLS, riveting, capable of riveting ALL of the following sizes:
(a) 2.4 mm;
(b) 3.2 mm;
(c) 4.0 mm;
(d) 4.8 mm
Op. 14.01.1994
Dec. 22.04.1994
- TC 9401324
8205.59.00
TOOLS, fastening, explosive charge operated with disc magazine, but
NOT including the following:
(a) accessories;
(b) tool boxes
Op. 03.05.1994
Dec. 05.08.1994
- TC 9404498
8205.59.00
TOOLS, grabbing or retrieving incorporating ALL of the following:
(a) retractable claw fingers or magnet;
(b) flexible shaft and squeeze handle operation
Op. 16.06.1994
Dec. 16.09.1994
- TC 9405211
8205.59.00
PARTS OF FASTENING TOOLS, operated with disc magazine explosive
charges
Op. 06.10.1994
Dec. 13.01.1995
- TC 9407978
8205.59.00
TOOLS, CORNER FINISHING, gypsum drywall joints
Op. 07.11.1994
Dec. 06.03.1995
8205.59.00
- TC 9408770
TOOLS, MULTI-PURPOSE, incorporating a number of different working
attachments which fold or insert into the housing
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 19.07.1995
Dec. 27.11.1995
- TC 9509061
8205.59.00
TOOLS, MULTI-PURPOSE, incorporating a number of different working
attachments which fold or insert into the body
Op. 10.08.1995
Dec. 20.11.1995
- TC 9509574
8205.59.00
TOOLS, SECURITY SHIELD, HEXAGONAL CABLE CONNECTOR
Op. 26.04.1996
Dec. 16.08.1996
- TC 9606342
TOOLS, FLANGE SPREADING, PIPE
Op. 23.05.1996
Dec. 06.09.1996
- TC 9607789
8205.59.00
8205.59.00
STAPLING HAMMERS OR PLIERS OR TACKERS, manually operated, with
staple storage magazine
Op. 17.11.1997
Dec. 06.02.1998
- TC 9710130
8205.59.00
TOOLS, TAPING AND FINISHING, being ANY of the following:
(a) internal angle applicators;
(b) hand operated flat finish box OR corner box finishers;
(c) broad knives;
(d) cement mixers;
(e) corner rollers;
(f) block OR universal sanders;
(g) tapers
Op. 13.02.1998
Dec. 11.05.1998
- TC 9801341
8205.59.00
TIGHTENERS, CHAIN, HAND OPERATED
Op. 03.06.1998
Dec. 14.08.1998
- TC 9804765
TOOLS, CABLE TIE
Op. 04.06.1998
Dec. 21.08.1998
- TC 9804818
REAMERS, tapered from 4 mm to 20 mm
Op. 26.03.1999
Dec. 18.06.1999
- TC 9902168
TOOLS, TERMINATING, TELEPHONE WIRE, hand held
Op. 22.09.2000
Dec. 01.12.2000
- TC 0008061
PARTS, FOR ANY OF THE FOLLOWING:
(a) drill pipe slips;
(b) drill collar slips;
(c) casing safety clamps
Op. 04.11.1983
Dec. 04.11.1983
- TC 8334657
8205.59.00
8205.59.00
8205.59.00
8205.70
8205.70
GRIPS, wire, having a safe load capacity exceeding 900 kg
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341795
8205.70
JIGS, arrow fletching
Op. 06.12.1983
Dec. 06.12.1983
- TC 8341801
8205.70
OILWELL PUMPING EQUIPMENT, being ANY of the following:
(a) wire line clamps;
(b) polished rod clamps;
(c) stuffing box clamps;
(d) polished rod grips;
(e) tubing tongs;
(f) non-spark bell nipples
Op. 11.12.1985
Dec. 01.06.1987
- TC 8632015
8205.70
BOXES OR GUIDES, mitre
Op. 28.08.1986
8205.70
Dec. 12.01.1987
- TC 8634908
DOVETAIL JIGS and attachments, fully adjustable, in sizes 12 inch
or 24 inch
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 26.07.1991
Dec. 13.11.1991
- TC 9106933
8205.70.00
SETS, PIPE CLAMP, consisting of ALL of the following:
(a) pipe holder with ratchet strap;
(b) carrier bars;
(c) pulling strap with holder;
(d) pulling shoes;
(e) pulling slides including ratchet
Op. 13.11.2015
Dec. 10.02.2016
- TC 1541491
8205.70.00
KITS, DRILL JIG, consisting of ALL of the following:
(a) square drivers;
(b) drill bits;
(c) collars;
(d) screws;
(e) plugs;
(f) hexagonal key;
(g) DVD;
(h) manuals AND/OR project plans;
(i) drill jigs
Op. 08.10.2015
Dec. 04.01.2016
- TC 1537725
8205.70.00
TEST CLAMPS, VERTICAL CONNECTION SYSTEM, SUBSEA, incorporating a
blind hub OR blind flange
Op. 14.09.2012
Dec. 03.12.2012
- TC 1235263
8205.70.00
GUTTER CLAMPS, LADDER, having adjustable locking jaw
Op. 05.04.2011
Dec. 20.06.2011
- TC 1111524
8205.70.00
CABLE LOCKS, hand adjustable, comprising ALL of the following:
(a) zinc alloy casings;
(b) sintered steel locking wedges;
(c) stainless steel springs
Op. 28.04.2009
Dec. 17.07.2009
- TC 0914019
8205.70.00
TONGS, having a working load or torque capacity of 3 000 N.m or
greater
Op. 05.01.1994
Dec. 15.04.1994
- TC 9401186
8205.70.00
WORK STANDS, bicycle, complete with adjustable holding clamp
Op. 24.11.1994
Dec. 13.03.1995
- TC 9409181
8205.70.00
GRIPS, CABLE, being any of the following:
(a) lashing wire grips;
(b) figure 8 grips;
(c) pvc covered conductor come-along grips
but NOT including stocking, sock or mesh type pulling grips
Op. 11.05.1995
Dec. 29.09.1995
- TC 9505463
8205.70.00
WORK STATIONS, PRINTED CIRCUIT BOARD, comprising ALL of the
following:
(a) cast iron base;
(b) adjustable work holder clips to hold the printed circuit
board;
(c) magnifying glass with adjustable arm
Op. 13.11.1995
Dec. 11.03.1996
- TC 9512518
8205.70.00
TOGGLES, STRAINING, HIDE
Op. 19.02.1998
Dec. 01.05.1998
- TC 9801538
PIPE SQUEEZE OFF TOOLS
Op. 08.12.1998
Dec. 05.03.1999
- TC 9810668
8205.70.00
8205.70.00
VICES
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8205.70.00
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302754
CLAMPS
Op. 14.03.2003
Dec. 06.06.2003
- TC 0302773
8205.70.00
GRABS, ROPE OR WIRE, having BOTH of the following:
(a) gravity operated internal spring;
(b) breaking load NOT less than 1 900 kg
Op. 09.07.2004
Dec. 01.10.2004
- TC 0406963
8205.90.00
KITS, HAND TOOL, non-magnetic, non-sparking, including NOT less
than ANY 5 of the following categories:
(a) shovels;
(b) picks;
(c) pry bars;
(d) hammers;
(e) chisels;
(f) scrappers
Op. 09.07.2009
Dec. 25.09.2009
- TC 0924291
8206.00.00
TOOL KITS, BICYCLE, in cases OR boxes OR saddle bags, consisting
of NOT less than a combination of ANY two of the following
categories:
(a) screwdrivers;
(b) spanners;
(c) cassette lock-ring removal tools;
(d) wrenches;
(e) freewheel turners tools;
(f) crank arm removal tools;
(g) crank extractor tools;
(h) spoke adjuster;
(i) metal tyre levers;
(j) bottom bracket AND/OR headset locking ring tools;
(k) bottom bracket removal tools;
(l) socket tool adaptors;
(m) freewheel removing tools;
(n) hex keys;
(o) wrench sockets;
(p) crank arm dust cap tools;
(q) cable cutters;
(r) multipurpose folding tools;
(s) chain remover tools;
(t) chain rivet extractor tools;
(u) chain fixing pliers;
(v) chain cleaning tools,
with OR without ANY of the following:
(i) tyre patches;
(ii) tyre cement;
(iii) grease;
(iv) plastic tyre lever;
(v) crank extractor nut;
(vi) chain wear indicator;
(vii) valve adaptors;
(viii) chain cleaner brush
Op. 11.04.2014
Dec. 14.07.2014
- TC 1412675
8206.00.00
SETS,
(a)
(b)
(c)
(d)
(e)
(f)
(g)
TOOL, COMPRESSION, consisting of ALL of the following:
operating instructions;
transport case;
pipe cutter;
compression tool;
expander tool;
cleaning brush;
lubricant gel
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 08.04.2011
Dec. 04.07.2011
- TC 1112020
8206.00.00
KITS, TOOL, COMPRESSION, consisting of ALL of the following:
(a) operating instructions;
(b) transport case;
(c) pipe cutter;
(d) compression jaws;
(e) compression tool;
(f) expander heads;
(g) expander tool;
(h) cleaning brush;
(i) lubricant gel
Op. 15.04.2009
Dec. 10.07.2009
- TC 0912435
8206.00.00
TOOL SETS, comprising tools in NOT less than five of the
following categories:
(a) sockets;
(b) ratchets;
(c) universal joints;
(d) extension bars;
(e) wrenches;
(f) pliers;
(g) screwdrivers;
(h) screwdriver bits;
(i) knives
Op. 17.12.2008
Dec. 08.04.2009
- TC 0910009
8206.00.00
TOOL SETS, comprising tool box and NOT less than ANY five of the
following:
(a) pliers;
(b) hammers;
(c) spanners;
(d) socket sets comprising interchangeable spanner sockets and
handles;
(e) punches;
(f) chisels;
(g) hex keys;
(h) hacksaws
Op. 17.07.2007
Dec. 21.09.2007
- TC 0711515
8206.00.00
KITS, TOOL, comprising not LESS than ANY two of the following:
(a) allen keys;
(b) chisels;
(c) crimpers;
(d) files;
(e) hammers;
(f) multi grips;
(g) pliers;
(h) punches;
(i) saws;
(j) screwdrivers;
(k) shears;
(l) snips;
(m) sockets;
(n) spanners;
(o) wrenches
Op. 15.09.2008
Dec. 05.12.2008
- TC 0831549
8206.00.00
TOOL SETS, consisting of ALL of the following:
(a) screwdriver set;
(b) long nose locking pliers;
(c) curved jaw locking pliers
Op. 18.10.1993
Dec. 21.01.1994
Item 50 applies unless otherwise stated.
- TC 9310994
Tariff
Description
===========================================================================
8206.00.00
KITS, COMPUTER SERVICE, comprising ALL of the following:
(a) zippered case
(b) plastic leaded computer chip (PLCC) extractor;
(c) wire cutters;
(d) long nose pliers;
(e) component tube;
(f) desoldering pump;
(g) solder in dispensing tube;
(h) integrated circuit (IC) inserter (14 and 16 pin);
(i) 1/4 inch and 3/16 inch (nominally 6.35 mm and 4.76 mm) Philips
head screwdriver bits;
(j) flat head and Philips head screwdrivers;
(k) double ended torque bit;
(l) 1/4 inch and 3/16 inch (nominally 6.35 mm and 4.76 mm) Hex
driver bits;
(m) driver handle;
(n) insulated tweezers;
(o) needle nose tweezers;
(p) pearl catch;
(q) IC extractor;
(r) cleaning brush;
(s) 5.9 inch (nominally 150 mm) shifting spanner;
(t) crimping tool;
(u) heat sink clip;
(v) soldering aid set, comprising:
(i) fine-point and slotted end probe;
(ii) scraper and end wire brush probe;
(iii) angle scriber and scraper probe;
(iv) aluminium heat sink;
(v) 170 mm tweezers
Op. 23.11.1995
Dec. 11.03.1996
- TC 9512964
8206.00.00
KITS, COMPUTER SERVICE, comprising ALL of the following:
(a) zippered case;
(b) plastic-leaded computer chip (PLCC) extractor;
(c) wire cutters;
(d) long nose pliers;
(e) component tube;
(f) 1/4 inch and 3/16 inch Hex driver bits (nominally 6.35 mm and
4.76 mm);
(g) driver handle
(h) double-ended torque bit;
(i) integrated circuit (IC) inserter (14 and 16 pin);
(j) flat-head screwdrivers, 75 X 5 mm and 75 x 3 mm;
(k) Philips head screwdrivers, size number 1 and 0;
(l) insulated tweezers;
(m) pearl catch;
(n) IC extractor
Op. 23.11.1995
Dec. 12.03.1996
- TC 9512981
8207.13
BITS, rock drill, rotary tricone type, having provisions for air
or fluid circulation
Op. 01.07.1996
Dec. 03.05.1996
- TC 9602726
8207.13
BITS, rotary percussive rock drilling, but NOT including ANY
of the following:
(a) bits designed for use with down-the-hole percussive
hammers capable of drilling holes with a nominal diameter
of 88 mm or greater;
(b) bits designed for use with top-hole percussive hammers
capable of drilling holes with a nominal diameter of 100 mm or
greater;
(c) integral drill steels;
(d) rods with bits, being ANY of the following:
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(i) tapered drill rods;
(ii) extension rods;
(iii) speed rods (male/female);
(iv) drifter rods;
(v) shank rods;
(vi) guide rods
Op. 01.07.1996
Dec. 30.04.1996
- TC 9602858
8207.13.00
PARTS, DRILLING MACHINE, being ANY of the following:
(a) teeth;
(b) horizontal directional drilling (HDD) drill bits;
(c) rock drill bits;
(d) pilot drill bits;
(e) bars;
(f) round shank bits;
(g) drilling interchange bar system, consisting of ALL of the
following:
(i) interchange bars;
(ii) bar holders;
(iii) screw connectors,
(h) scraper blades;
(i) shank assemblies, consisting of BOTH of the following:
(i) shank bit holder;
(ii) drill bits
Op. 27.06.2016
Dec. 19.09.2016
- TC 1620979
8207.13.00
SCRAPERS, BORING HEAD, TUNNEL BORING MACHINE
Op. 27.06.2007
Dec. 23.12.2009
- TC 0949849
8207.13.00
PARTS, FOUNDATION DRILLING MACHINE, being ANY of the following:
(a) casing shoes or coring tools weld on bars having BOTH of
the following:
(i) three or more tungsten carbide inserts; and
(ii)length NOT greater than 110 mm;
(b) casing shoes or coring tools quick change bars with three
or more tungsten carbide inserts;
(c) flat teeth with a height NOT less than 155 mm
NB Conical tools are excluded from this order
Op. 27.06.2007
Dec. 23.12.2009
- TC 0949848
8207.13.00
BITS, TOP HAMMER, ROTARY, PERCUSSIVE, consumable type, having a
diameter of less than 68 mm
Op. 04.10.1996
Dec. 31.01.1997
- TC 9611260
8207.19
BITS, rock drill, having BOTH of the following:
(a) cutting structure of diamonds (whether or not natural
diamonds);
(b) dia exceeding 450 mm
Op. 01.07.1996
Dec. 03.05.1996
- TC 9602668
8207.19
BLANKS, tool, consisting of a synthetic polycrystalline diamond
layer bonded to a tungsten carbide substrate
Op. 01.07.1996
Dec. 02.05.1996
- TC 9602670
8207.19
BITS, rock drill, rotary tricone type, having provisions for air
or fluid circulation
Op. 01.07.1996
Dec. 02.05.1996
- TC 9602725
8207.19.00
PARTS, EARTH BORING TOOL, being cast iron picks incorporating a
spray nozzle
Op. 11.02.2013
Dec. 06.05.2013
- TC 1305046
8207.19.00
TOOLHOLDERS, ROAD HEADER AND TUNNELING MACHINES, being either:
(a) forged blocks; or
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(b) forged blocks with a fitted, replaceable internal sleeve
NB Sleeves are excluded from this TCO
Op. 27.06.2007
Dec. 23.12.2009
- TC 0949846
8207.19.00
CANOPY TUBE DRILLING SYSTEM, including BOTH of the following:
(a) casing tube, incorporating grout relief valves, having
tube connection bending strength NOT less than 20.6 kNm;
(b) reamers
Op. 01.07.2009
Dec. 25.09.2009
- TC 0922650
8207.19.00
DRILL BITS, single use, cast iron
Op. 19.05.2009
Dec. 14.08.2009
- TC 0916937
DRILL RODS, integral
Op. 01.07.1996
- TC 9602857
8207.19.00
Dec. 27.03.1996
8207.19.00
BITS, ROCK DRILL, DIAMOND CUTTING STRUCTURE, diameter NOT less than
215.9 mm and NOT greater than 444.5 mm
Op. 01.07.1996
Dec. 02.07.1996
- TC 9605754
8207.19.00
NOZZLES, ROCK DRILL BIT, DIAMOND CUTTING STRUCTURE
Op. 01.07.1996
Dec. 02.07.1996
- TC 9607206
8207.19.00
BITS, CORING, POLYCRYSTALLINE DIAMOND OR NATURAL DIAMOND CUTTING
STRUCTURE
Op. 01.07.1996
Dec. 02.07.1996
- TC 9607207
8207.19.00
BITS, OIL/GAS DRILLING, polycrystalline diamond (PDC) and natural
diamond (ND) cutting structure, having ALL of the following:
(a) whirl reducing capability;
(b) hydraulic cleaning and cooling features;
(c) back up secondary cutting structure of natural diamond
impregnated studs;
(d) in all sizes greater than 105.77 mm
Op. 01.07.1996
Dec. 02.07.1996
- TC 9607209
8207.19.00
BITS, ROCK DRILL, button type, air or fluid flushing
Op. 01.07.1996
Dec. 01.07.1996
- TC 9608773
8207.19.00
HOLE ENLARGER, incorporating seamless rotating cutting wheels, and
parts as follows:
(a) wear rings;
(b) body;
(c) locking rings;
(d) ball rings;
(e) conical bushing;
(f) lubricant cylinders;
(g) caps;
(h) blind plugs;
(i) ball retainers;
(j) wedges;
(k) counterweights;
(l) shafts;
(m) wear sleeves;
(n) plungers;
(o) cutter wheels;
(p) lubricant pistons
Op. 10.09.1996
Dec. 15.11.1996
- TC 9610518
8207.19.00
BITS, DRILLING, OIL AND GAS, POLYCRYASTALLINE DIAMOND (PDC), having
ALL of the following:
(a) bit whirl resistance;
(b) hydraulic cleaning of cutting structure;
(c) with or without impregnated diamond secondary cutter
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
structure;
(d) in all sizes greater than 105.77 mm diameter
Op. 29.05.1996
Dec. 08.01.1997
- TC 9612690
8207.19.00
NOZZLES, ROTARY TRICONE ROCK DRILL BIT
Op. 01.07.1997
Dec. 12.09.1997
- TC 9705688
8207.19.00
PARTS, 600 MM OR GREATER DIAMETER ROCK DRILLING RAISE BORER, being
ANY of the following:
(a) stems;
(b) saddles;
(c) cutters;
(d) base heads;
(e) segments;
(f) segment supports;
(g) extension segment;
(h) wear pads;
(i) wedges
Op. 05.12.1997
Dec. 27.02.1998
- TC 9710726
8207.19.00
AUGER PIERS, EARTH BORING, BUILDING FOUNDATION, self locking
Op. 10.05.2004
Dec. 23.07.2004
- TC 0404599
8207.20
PLATES, wire drawing, multi-holed
Op. 22.12.1987
Dec. 23.05.1988
- TC 8800419
DIES, WIRE DRAWING, tungsten carbide
Op. 27.05.2014
Dec. 18.08.2014
- TC 1417768
8207.20.00
8207.20.00
DIES, DRAWING, 28 mm x 14 mm, having ALL the following
specifications:
(a) steel cased with a fixed tungsten carbide nib finished to a
lead angle of 11 degrees and an exit angle of 26 degress
+/- 0.25 degrees;
(b) sizes range from 0.150 mm to 1.800 mm (inclusive) with a
surface finish roughness of RA=0.4, maximum tolerance
+/- 0.001 mm;
Op. 02.05.1995
Dec. 06.10.1995
- TC 9505281
8207.20.00
DIES, WIRE DRAWING, tungsten carbide nib having an inside diameter
NOT exceeding 7 mm in steel case with internal polished form
Op. 04.03.1997
Dec. 23.05.1997
- TC 9701916
8207.30
PUNCHES, cross recess screwhead
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341923
8207.30
PATTERN PRICKERS, PERFORATING PUNCHES OR PERFORATING TUBES, single
or double edged
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341954
8207.30
DIES, tungsten carbide, powder metal compacting press
Op. 07.02.1984
Dec. 09.09.1986
- TC 8633407
8207.30
PUNCHES, sheet metal, hand held, key operated
Op. 17.07.1986
Dec. 09.03.1988
- TC 8634573
DIES, DRILL POINT
Op. 24.11.2006
- TC 0618922
8207.30.00
Dec. 02.03.2007
8207.30.00
PUNCH UNITS, for aluminium can body making machine
Op. 04.01.1995
Dec. 28.04.1995
- TC 9500611
8207.30.00
FIN ROLLS, HEAT EXCHANGER FIN FORMING MACHINES
Op. 06.07.1998
Dec. 11.09.1998
Item 50 applies unless otherwise stated.
- TC 9802950
Tariff
Description
===========================================================================
8207.30.00
ROLLERS, FIN FORMING MACHINE, consisting of individual plates
having ALL of the following:
(a) eccentricity (circular runout) NOT greater than 0.005 mm;
(b) parallelism NOT greater than 0.05 mm;
(c) flatness NOT greater than 0.05 mm
Op. 07.07.1998
Dec. 11.09.1998
- TC 9805915
8207.30.00
TOOLS AND DIES, necking, aluminium can body
Op. 23.09.2003
Dec. 12.12.2003
- TC 0312042
8207.40
DIES, button (thread cutting), high speed steel, ground thread
For the purposes of TC 8533688 "high speed steel" means steel
that contains:
(a) NOT less than 0.60% by weight of carbon; and
(b)
(i) chromium; or
(ii) vanadium; or
(iii) cobalt; and
(c)
(i) molybdenum and tungsten, in such percentages by
weight that the sum of the number equal to the
percentage of tungsten and the number equal to
twice the percentage of molybdenum is NOT less
than 13.5%; or
(ii) NOT less than 7% by weight of molybdenum; or
(iii) NOT less than 14% by weight of tungsten
Op. 07.02.1984
Dec. 07.02.1984
- TC 8533688
8207.40
TOOLS, having tips made from EITHER of the following:
(a) high speed tool steel having EITHER of the following:
(i) a content NOT less than 22% by weight of tungsten;
(ii) a content NOT less than 12% by weight of cobalt;
(b) high speed vanadium steel capable of machining steel
containing NOT less than 10% by weight of manganese
Op. 01.01.1988
Dec. 01.01.1988
- TC 8632739
8207.40.00
THREAD ROLLING DIES, thread rolling machinery, planetary action,
having a thread rolling capacity 16 mm to 30 mm inclusive, capable
of rolling thread on both ends of the bolt simultaneously
Op. 17.08.1993
Dec. 19.11.1993
- TC 9307442
8207.40.00
THREAD ROLLING DIES, SELF TAPPING SCREWS
Op. 06.06.1995
Dec. 29.09.1995
- TC 9505989
8207.40.00
COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, but NOT including
tool bodies imported with tool tips plates OR sticks
Op. 15.12.1997
Dec. 27.02.1998
- TC 9711101
8207.40.00
PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY
of the following:
(a) anvil;
(b) axial support;
(c) bellevile washer;
(d) cassette;
(e) chipbreaker;
(f) coolant adaptor;
(g) drive key;
(h) insert key;
(i) boring head clamp pin;
(j) plug;
(k) setting gauge;
(l) sleeve (NOT being tungsten carbide);
(m) adjusting screw;
(n) anvil screw;
(o) arbor screw;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(p) axial support screw;
(q) blanking screw;
(r) cassette screw;
(s) locking screw;
(t) retaining screw;
(u) belleville washer screws;
(v) wedge screw;
(w) eccentric cam;
(x) level pin;
(y) clamp stud;
(z) shim;
(aa) shim pin;
(ab) driving wedge;
(ac) lock nut;
(ad) punch;
(ae) clamp;
(af) shim screw;
(ag) lock pins;
(ah) boring bar clamp;
(ai) toggle lever;
(aj) retainer pin;
(ak) nest;
(al) support blade;
(am) locating pin;
(an) cartridge;
(ao) clamping sleeve;
(ap) wedge clamp holder;
(aq) wedge clamp tool block;
(ar) nozzles (NOT being tungsten carbide);
(as) clamp;
(at) wedge;
(au) centre pin;
(av) O ring;
(aw) mounting washer (NOT being tungsten carbide);
(ax) spring and pin;
(ay) stop screw;
(az) coolant deflector;
(ba) magnetic sleeve;
(bb) blade screw;
(bc) taper pin;
(bd) location roller;
(be) eccentric pin;
(bf) insert seat including cassette;
(bg) top clamp;
(bh) adjustment element
Op. 29.06.1998
Dec. 11.09.1998
- TC 9805626
8207.50
BITS for braces, fencing and wagon, square taper shanked, having
a twist of NOT less than 200 mm and an overall length of NOT less
than 300 mm
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341886
8207.50
DRILLS, taper shank with coolant hole, Imperial dia Size 15/32 in.
or greater but NOT exceeding 2 in., but NOT including drills
of ANY of the following Imperial Sizes:
(a) 1/2 in.;
(b) 5/8 in.;
(c) 23/32 in.;
(d) 25/32 in.;
(e) 29/32 in.;
(f) 1 in.;
(g) 1 1/16 in.;
(h) 1 3/16 in.;
(i) 1 1/2 in.
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 07.02.1984
8207.50
8207.50
Dec. 07.02.1984
- TC 8341913
DRILLS, twist, wholly tungsten carbide
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341914
DRILL TIPS, tubular, tungsten carbide coated
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341995
8207.50
BITS, machine tool, being woodworking drilling bits, but NOT
including ANY of the following:
(a) dowelling bits having a dia exceeding 6.2 mm but NOT
exceeding 15.9 mm;
(b) flat power bits having a dia exceeding 9.5 mm but NOT
exceeding 25.4 mm;
(c) machine bits with scotch pattern noses or jennings pattern
noses;
(d) router bits;
(e) single flute wood bits having a dia exceeding 1.50 mm
but NOT exceeding 9.55 mm;
(f) twin flute wood bits having a dia exceeding 6.2 mm but
NOT exceeding 12.7 mm;
(g) wood screw pilot bits NOT capable of drilling holes having
a depth exceeding 38 mm
For the purposes of TC 8431291 the machine bits excluded may
be of the solid centre type or the double twist type
Op. 01.04.1984
Dec. 01.01.1988
- TC 8431291
8207.50
DRILLS, high speed steel, dia NOT exceeding 0.29 mm
Op. 14.07.1987
Dec. 26.02.1988
- TC 8733998
8207.50
BITS, core, tungsten carbide tipped
Op. 06.01.1988
Dec. 03.11.1988
- TC 8800659
8207.50
STEPDRILLS, multistep, single flute, capable of drilling and
deburring more than 5 individual hole sizes in metal, wood, plastic
and the like
Op. 22.04.1988
Dec. 14.11.1990
- TC 8804779
8207.50
DRILLS, glass, metal bonded, having a dia exceeding 115 mm
Op. 26.04.1989
Dec. 31.07.1989
- TC 8903162
8207.50.00
ROUNDING RINGS, POLYETHYLENE PIPE, galvanised steel, having ALL
of the following:
(a) rounding capacity diameter NOT less than 63 mm and
NOT greater than 250 mm;
(b) hinged;
(c) nut AND thread closure
Op. 26.08.2015
Dec. 16.11.2015
- TC 1532734
8207.50.00
CORERS, DIAMOND TIPPED, having a diameter NOT greater than
600 mm
Op. 11.03.2014
Dec. 11.06.2014
- TC 1408893
8207.50.00
BITS, MASONRY CORE, having ALL of the following:
(a) diamond segments;
(b) hex shank drive;
(c) diameter NOT less than 6 mm AND NOT greater than 50 mm
Op. 15.10.2013
Dec. 23.12.2013
- TC 1334347
8207.50.00
TUBES, DRILL BIT, having a length NOT greater than 2 metres
Op. 22.03.2013
Dec. 25.06.2013
- TC 1310247
8207.50.00
SAW DRILLS, being drill bits that use the first 25mm (one inch) or
so of the drill bit to drill through the desired material, then use
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
the rest of the special shaft as a cutting tool or saw
Op. 17.09.1993
Dec. 31.12.1993
- TC 9310250
8207.50.00
GUN DRILLS, having ALL of the following:
(a) being ANY of the following:
(i) carbide tipped;
(ii) solid carbide;
(iii) solid carbide heads;
(b) having ALL the following:
(i) standard driver;
(ii) coolant channels through centre;
(iii) tip off centre;
(c) but NOT including ANY of the following:
(i) diameter exceeding 5.99 mm but NOT exceeding 25.3 mm;
(ii) length NOT greater than 300 mm
Op. 01.02.1995
Dec. 23.06.1995
- TC 9501331
8207.50.00
DRILLS, GUN, as follows:
(a) being ANY of the following;
(i) carbide tipped;
(ii) solid carbide;
(iii) solid carbide heads,
(b) having ALL of the following;
(i) standard driver;
(ii) coolant channels through centre;
(iii) tip off-centre,
(c) having EITHER of the following;
(i) length greater than 300 mm;
(ii) length less than or equal to 300 mm, with outside
diameter less than 6 mm or greater than 25.3 mm
Op. 26.10.1995
Dec. 02.02.1996
- TC 9511526
8207.50.00
DRILL BITS, MASONARY, HAMMER, having BOTH of the following:
(a) slotted shank;
(b) hammer proof carbide tip
Op. 25.12.1995
Dec. 31.03.1996
- TC 9600818
8207.50.00
DRILL BITS, ELECTRO-PNEUMATIC ROTARY HAMMER, tungsten carbide
tipped, having a shank geometry of EITHER of the following:
(a) slotted drive;
(b) triangular
Op. 11.08.1997
Dec. 17.10.1997
- TC 9706979
8207.50.00
COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, but NOT including
tool bodies imported with tool tips, plates or sticks
Op. 15.01.1998
Dec. 27.03.1998
- TC 9800403
8207.50.00
DRILLS, chisel tip auger
Op. 05.02.1998
8207.50.00
Dec. 17.04.1998
- TC 9801081
BITS, AUGER, scotch pattern
Op. 19.04.1999
Dec. 09.07.1999
- TC 9902708
8207.60
BROACHES, involute form, toothed length 762 mm or greater
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341894
8207.60
BROACHES, spline, involute form
Op. 07.02.1984
Dec. 01.01.1988
8207.60
- TC 8341898
BROACHES, spline, of the hexagonal, square, rectangular, serrated,
straight sided or keyway types, length of tooth area 762 mm or
greater
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341899
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8207.60
REAMERS, adjustable
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341924
8207.60
BITS, machine tool, being woodworking boring bits, but NOT
including ANY of the following:
(a) dowelling bits having a dia exceeding 6.2 mm but NOT
exceeding 15.9 mm;
(b) flat power bits having a dia exceeding 9.5 mm but NOT
exceeding 25.4 mm;
(c) machine bits with scotch pattern noses or jennings pattern
noses;
(d) router bits;
(e) single flute wood bits having a dia exceeding 1.50 mm
but NOT exceeding 9.55 mm;
(f) twin flute wood bits having a dia exceeding 6.2 mm but
NOT exceeding 12.7 mm;
(g) wood screw pilot bits NOT capable of drilling holes having
a depth exceeding 38 mm
For the purposes of TC 8632394 the machine bits excluded may be
of the solid centre type or the double twist type
Op. 01.01.1988
Dec. 01.01.1988
- TC 8632394
8207.60.00
BROACHES, tungsten carbide tipped, having ALL of the following:
(a) cutter diameter NOT less than 17.5 mm and NOT greater than
100 mm;
(b) cutting depth NOT greater than 75 mm;
(c) side lock shank OR one touch shank;
(d) full circle cutting surface
Op. 15.01.2009
Dec. 14.04.2009
- TC 0901175
8207.60.00
TOOLS, being oil and gas well casing reaming shoes
Op. 22.08.2007
Dec. 02.11.2007
- TC 0713255
8207.60.00
CONVERSION AND MODIFICATION EQUIPMENT, AUTOMOTIVE ENGINE COMPONENT
MANUFACTURING AND/OR ASSEMBLY MACHINES, being ANY of the
following:
(a) double over-head cam engine head boring bars or indexible
carbide insert borers;
(b) cyclinder block, cylinder head, bearing bridge or oil pan
boring bars or indexible carbide insert borers
Op. 21.08.1995
Dec. 08.12.1995
- TC 9509870
8207.60.00
COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, but NOT including
tool bodies imported with tool tips, plates or sticks
Op. 15.01.1998
Dec. 27.03.1998
- TC 9800407
8207.70
CUTTERS, gear shaper, single, paired or in tandem, being ANY of
the following:
(a) chain sprocket, disc type;
(b) extended boss;
(c) gear shaving;
(d) helical, for continuous tooth double helical gears;
(e) helical disc;
(f) hub;
(g) rack;
(h) shank;
(i) special form;
(j) spline disc;
(k) spur disc
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341901
8207.70
CUTTERS, square shoulder milling, in the form of square shoulder
shell mill types or end milling types, incorporating parallel
shanks or morse taper shanks and having indexable throwaway
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
cutting inserts
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341904
8207.70
HOBS, having a dia 38 mm or less OR 204 mm or greater
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341919
8207.70
LAPS, for rounding holes in die ejector pin holes
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341920
ROLLING RACKS, serration
Op. 07.02.1984
- TC 8341929
8207.70
Dec. 07.02.1984
8207.70
TOOLS, having tips made from EITHER of the following:
(a) high speed tool steel having EITHER of the following:
(i) a content NOT less than 22% by weight of tungsten;
(ii) a content NOT less than 12% by weight of cobalt;
(b) high speed vanadium steel capable of machining steel
containing NOT less than 10% by weight of manganese
Op. 01.01.1988
Dec. 01.01.1988
- TC 8632742
8207.70
BURRS, rotary, being interchangeable tools for power operated
hand tools
Op. 11.03.1987
Dec. 04.06.1987
- TC 8732928
8207.70
KEY SEATING MACHINE CUTTERS
Op. 01.01.1988
Dec. 01.01.1988
- TC 8904498
8207.70.00
TOOLS, OR TOOL HEADS, MILLING, DOWNHOLE, OIL AND GAS WELL
Op. 06.11.2008
Dec. 30.01.2009
- TC 0838646
8207.70.00
CONVERSION AND MODIFICATION EQUIPMENT, AUTOMOTIVE ENGINE COMPONENT
MANUFACTURING AND/OR ASSEMBLY MACHINES, being ANY of the following:
(a) double over-head cam engine head milling cutters OR indexible
carbide insert milling cutters;
(b) cylinder block, cylinder head, bearing bridge OR oil pan
milling cutters OR indexible carbide insert milling cutters
Op. 18.08.1995
Dec. 08.12.1995
- TC 9509853
8207.70.00
COMPOSITE TOOL BODIES (HOLDERS), metal working, having an
effective cutting diameter NOT exceeding 205 mm but NOT
including tool bodies imported with tool tips, plates OR sticks
Op. 22.09.1997
Dec. 12.12.1997
- TC 9708400
8207.70.00
PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY
of the following:
(a) anvil;
(b) axial support;
(c) bellevile washer;
(d) cassette;
(e) chipbreaker;
(f) coolant adaptor;
(g) drive key;
(h) insert key;
(i) boring head clamp pin;
(j) plug;
(k) setting gauge;
(l) sleeve (NOT being tungsten carbide);
(m) adjusting screw;
(n) anvil screw;
(o) arbor screw;
(p) axial support screw;
(q) blanking screw;
(r) cassette screw;
(s) locking screw;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(t) retaining screw;
(u) belleville washer screws;
(v) wedge screw;
(w) eccentric cam;
(x) level pin;
(y) clamp stud;
(z) shim;
(aa) shim pin;
(ab) driving wedge;
(ac) lock nut;
(ad) punch;
(ae) clamp;
(af) shim screw;
(ag) lock pins;
(ah) boring bar clamp;
(ai) toggle lever;
(aj) retainer pin;
(ak) nest;
(al) support blade;
(am) locating pin;
(an) cartridge;
(ao) clamping sleeve;
(ap) wedge clamp holder;
(aq) wedge clamp tool block;
(ar) nozzles (NOT being tungsten carbide);
(as) clamp;
(at) wedge;
(au) centre pin;
(av) O ring;
(aw) mounting washer (NOT being tungsten carbide);
(ax) spring and pin;
(ay) stop screw;
(az) coolant deflector;
(ba) magnetic sleeve;
(bb) blade screw;
(bc) taper pin;
(bd) location roller;
(be) eccentric pin;
(bf) insert seat including cassette;
(bg) top clamp;
(bh) adjustment element
Op. 29.06.1998
Dec. 11.09.1998
- TC 9805623
8207.80
BLANKS, tool, consisting of a synthetic polycrystalline diamond
layer bonded to a tungsten carbide or stainless steel substrate
Op. 30.12.1987
Dec. 23.06.1988
- TC 8800729
8207.80
COMPOSITE TOOL BODIES (HOLDERS), metal working, but NOT including
tool bodies imported with tool tips, plates, sticks or the like
Op. 20.07.1987
Dec. 02.05.1988
- TC 8802324
8207.80.00
PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY
of the following:
(a) anvil;
(b) axial support;
(c) bellevile washer;
(d) cassette;
(e) chipbreaker;
(f) coolant adaptor;
(g) drive key;
(h) insert key;
(i) boring head clamp pin;
(j) plug;
(k) setting gauge;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(l) sleeve (NOT being tungsten carbide);
(m) adjusting screw;
(n) anvil screw;
(o) arbor screw;
(p) axial support screw;
(q) blanking screw;
(r) cassette screw;
(s) locking screw;
(t) retaining screw;
(u) belleville washer screws;
(v) wedge screw;
(w) eccentric cam;
(x) level pin;
(y) clamp stud;
(z) shim;
(aa) shim pin;
(ab) driving wedge;
(ac) lock nut;
(ad) punch;
(ae) clamp;
(af) shim screw;
(ag) lock pins;
(ah) boring bar clamp;
(ai) toggle lever;
(aj) retainer pin;
(ak) nest;
(al) support blade;
(am) locating pin;
(an) cartridge;
(ao) clamping sleeve;
(ap) wedge clamp holder;
(aq) wedge clamp tool block;
(ar) nozzles (NOT being tungsten carbide);
(as) clamp;
(at) wedge;
(au) centre pin;
(av) O ring;
(aw) mounting washer (NOT being tungsten carbide);
(ax) spring and pin;
(ay) stop screw;
(az) coolant deflector;
(ba) magnetic sleeve;
(bb) blade screw;
(bc) taper pin;
(bd) location roller;
(be) eccentric pin;
(bf) insert seat including cassette;
(bg) top clamp;
(bh) adjustment element
Op. 29.06.1998
Dec. 11.09.1998
- TC 9805624
8207.90
CUTTERS, router, solid carbide, having BOTH of the following:
(a) spiral cut flutes;
(b) a dia of 1.0 mm or greater but NOT exceeding 2.4 mm
Op. 01.09.1983
Dec. 22.06.1984
- TC 8333813
8207.90
EXTRACTORS, screw threading tap
Op. 06.12.1983
Dec. 06.12.1983
8207.90
- TC 8341791
ACCESSORIES, SPIRAL RACHET SCREWDRIVER, being ANY of the
following:
(a) adaptors;
(b) countersink bits;
(c) drill points;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(d) screwdriving bits
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341884
8207.90
BITS, screwdriving, having 4 shoulders in parallel, capable of
preventing "slipping" or "riding up" under torque
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341889
8207.90
BITS, screwdriving, power tool, including bits with finder sleeves
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341890
8207.90
BITS, wire wrapping or wire unwrapping tool
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341891
DRESSERS, diamond, truing grinding wheel
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341911
8207.90
8207.90
TOOLS, interchangeable, composed wholly of beryllium-copper or
aluminium-bronze alloys
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341950
8207.90
STAMPS, leather
Op. 21.02.1984
Dec. 21.02.1984
- TC 8341952
8207.90
TOOLS, having tips made from EITHER of the following:
(a) high speed tool steel having EITHER of the following:
(i) a content NOT less than 22% by weight of tungsten;
(ii) a content NOT less than 12% by weight of cobalt;
(b) high speed vanadium steel capable of machining steel
containing NOT less than 10% by weight of manganese
Op. 01.01.1988
Dec. 01.01.1988
- TC 8632744
8207.90
NIBBLERS, sheet metal, being attachments for electric drills
Op. 18.04.1986
Dec. 11.07.1986
- TC 8633204
8207.90
HOBS, gear cutting, inserted blade type, having replaceable blade
sections
Op. 17.12.1986
Dec. 21.08.1987
- TC 8636251
8207.90
SCREWDRIVER BLADES, interchangeable, OTHER THAN allen, pozidriv,
phillips or slotted head types
Op. 10.11.1987
Dec. 26.08.1988
- TC 8735317
8207.90
SCUTCH COMBS
Op. 12.01.1988
8207.90
Dec. 05.04.1988
- TC 8800432
CHISELS, electro-pneumatic rotary hammer
Op. 27.01.1988
Dec. 02.03.1988
- TC 8801178
8207.90
EXPANDING OR CLEANING TOOLS, boiler tube, heat exchanger tube or
condenser tube, being interchangeable tools for machine tools
or power operated hand tools
Op. 15.02.1988
Dec. 11.07.1988
- TC 8801634
8207.90
WHEELS, glass sheet edging, diamond impregnated, concave pencil
type
Op. 11.05.1988
Dec. 18.07.1988
- TC 8804481
8207.90
POWER TOOL SETS, comprising BOTH of the following:
(a) screwdriver bits;
(b) nut drivers
Op. 10.02.1989
Dec. 03.04.1989
- TC 8901085
8207.90
TOOLS, interchangeable, masonry, being EITHER of the following:
(a) scrapers;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8207.90
8207.90.00
(b) lettering and carving
Op. 16.06.1989
Dec. 23.04.1990
- TC 8904739
BLADES, deburring tool
Op. 11.01.1991
Dec. 16.05.1991
- TC 9101183
TOOL HEADS, DRILL POLE
Op. 18.02.2016
Dec. 02.05.2016
- TC 1607521
8207.90.00
CORE CUTTERS, POLYETHYLENE PIPE, including ALL of the following:
(a) pilot drill;
(b) adaptors;
(c) core cutter diameter NOT less than 46 mm and NOT greater
than 400 mm
Op. 14.12.2015
Dec. 07.03.2016
- TC 1544722
8207.90.00
KITS, HOLE SAW, consisting of ALL of the following:
(a) hole saw blades;
(b) arbor;
(c) pilot drill,
with OR without EITHER of the following:
(i) ejector springs;
(ii) carry case
Op. 18.03.2015
Dec. 07.06.2015
- TC 1511083
8207.90.00
PARTS, HANDHELD INTERCHANGEABLE ELECTRIC TOOL, being scrapers
Op. 10.12.2013
Dec. 03.03.2014
- TC 1340737
8207.90.00
TOOLS, DEBARKER, being tool body AND/OR cutting tip
Op. 23.08.2012
Dec. 19.11.2012
- TC 1231254
8207.90.00
ROTARY PROFILE CUTTERS, carbide
Op. 02.08.2012
Dec. 15.10.2012
- TC 1227988
8207.90.00
ACCESSORIES, HAND TOOL, interchangeable, being ANY of the
following:
(a) grinding discs;
(b) rasping bits;
(c) cutting blades;
(d) polishing discs
Op. 01.05.2012
Dec. 23.07.2012
- TC 1213968
8207.90.00
PARTS, EXPANDER TOOL, being expander heads
Op. 11.10.2010
Dec. 07.01.2011
- TC 1045784
KITS, HOLESAW, comprising ALL the following:
(a) holesaw blades;
(b) mandrels;
(c) arbors, with OR without adapters;
(d) carry case
Op. 15.02.2010
Dec. 01.07.2010
- TC 1024835
HOLESAWS
Op. 09.11.2009
Dec. 08.02.2010
- TC 1006522
GUIDE SHOES, CASING, OIL AND GAS WELL
Op. 07.05.2009
Dec. 31.07.2009
- TC 0915419
8207.90.00
8207.90.00
8207.90.00
8207.90.00
8207.90.00
8207.90.00
HOBS, GEAR CUTTING, spiral bevel
Op. 22.08.2006
Dec. 17.11.2006
HOLESAWS, diamond coated
Op. 07.09.2006
Dec. 24.11.2006
- TC 0613940
- TC 0616925
CRIMPING JAWS, interchangeable, with or without carry case
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 29.10.2008
Dec. 23.01.2009
- TC 0837559
8207.90.00
HEXAGON BIT AND DRIVER SETS, comprising NOT less then ANY 3 of
the following:
(a) adapters;
(b) drill bits;
(c) hexagon head driver bits;
(d) screw guides;
(e) replacement screws;
(f) screw driver bits;
(g) nut drivers;
(h) bit holders
Op. 19.11.2008
Dec. 27.02.2009
- TC 0840298
8207.90.00
HOLESAWS, comprising ALL of the following:
(a) carbide tipped blade;
(b) arbor;
(c) pilot drill
Op. 28.10.1993
Dec. 04.02.1994
- TC 9312636
8207.90.00
CUTTERS, router, solid carbide, having ALL of the following:
(a) spiral cut flutes;
(b) a diameter of 0.8 mm to 3.175 mm;
(c) tool shank diameter of 3.175 mm
Op. 03.03.1994
Dec. 10.06.1994
- TC 9403546
8207.90.00
INTERCHANGEABLE HEADS, 16 or 22 mm diameter female recess, being
ANY of the following spanner types:
(a) fixed square drive;
(b) open end;
(c) flare (crowsfoot) end;
(d) ratchet square drive;
(e) ring end
Op. 14.02.1995
Dec. 05.06.1995
- TC 9501886
8207.90.00
COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, but NOT including
tool bodies imported with tool tips, plates or sticks
Op. 15.01.1998
Dec. 27.03.1998
- TC 9800404
8207.90.00
PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY
of the following:
(a) anvil;
(b) axial support;
(c) bellevile washer;
(d) cassette;
(e) chipbreaker;
(f) coolant adaptor;
(g) drive key;
(h) insert key;
(i) boring head clamp pin;
(j) plug;
(k) setting gauge;
(l) sleeve (NOT being tungsten carbide);
(m) adjusting screw;
(n) anvil screw;
(o) arbor screw;
(p) axial support screw;
(q) blanking screw;
(r) cassette screw;
(s) locking screw;
(t) retaining screw;
(u) belleville washer screws;
(v) wedge screw;
(w) eccentric cam;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(x) level pin;
(y) clamp stud;
(z) shim;
(aa) shim pin;
(ab) driving wedge;
(ac) lock nut;
(ad) punch;
(ae) clamp;
(af) shim screw;
(ag) lock pins;
(ah) boring bar clamp;
(ai) toggle lever;
(aj) retainer pin;
(ak) nest;
(al) support blade;
(am) locating pin;
(an) cartridge;
(ao) clamping sleeve;
(ap) wedge clamp holder;
(aq) wedge clamp tool block;
(ar) nozzles (NOT being tungsten carbide);
(as) clamp;
(at) wedge;
(au) centre pin;
(av) O ring;
(aw) mounting washer (NOT being tungsten carbide);
(ax) spring and pin;
(ay) stop screw;
(az) coolant deflector;
(ba) magnetic sleeve;
(bb) blade screw;
(bc) taper pin;
(bd) location roller;
(be) eccentric pin;
(bf) insert seat including cassette;
(bg) top clamp;
(bh) adjustment element
Op. 29.06.1998
Dec. 11.09.1998
- TC 9805625
8207.90.00
8208.10
TOOLS, PERCUSSION, HYDRAULIC BREAKER
Op. 06.08.1998
Dec. 16.10.1998
- TC 9806955
BLADES, cutting, pneumatic hand held nipper
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341970
8208.10
BLADES, shear or nibbler cutter, portable sheet metal cutting
power tool
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341991
8208.10
KNIVES OR CUTTING BLADES, strapping and tying machine
Op. 01.01.1988
Dec. 01.01.1988
- TC 8735881
8208.10
KNIVES OR CUTTING BLADES, gear making machine
Op. 28.01.1988
Dec. 06.06.1988
- TC 8802015
8208.10.00
SLITTING KNIVES, STEEL COIL SLITTING LINE, metal, having BOTH of
the following:
(a) thickness NOT less than 3 mm and NOT greater than 30 mm;
(b) accuracy tolerance of blade plus OR minus 0.003 mm
Op. 16.12.2011
Dec. 19.03.2012
- TC 1141972
8208.10.00
SLITTER KNIVES, having ALL the following:
(a) outside diameter NOT greater than 450 mm;
(b) thickness NOT greater than 40 mm;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(c) lapped surface
Op. 19.02.2010
8208.10.00
Dec. 03.05.2010
SLITTER KNIVES, having ALL the following:
(a) outside diameter NOT greater than 450 mm;
(b) thickness NOT greater than 40 mm;
(c) lapped surface
Op. 19.02.2010
Dec. 03.05.2010
- TC 1009023
- TC 1009023
8208.20.00
PARTS, HANDHELD INTERCHANGEABLE ELECTRIC TOOL, being wood
cutting blades
Op. 10.12.2013
Dec. 04.03.2014
- TC 1340738
8208.20
KNIVES, thicknessing planer, high speed steel, having ALL of the
following:
(a) length of 100 mm or greater but NOT exceeding 700 mm;
(b) thickness NOT exceeding 1 mm;
(c) 2 cutting edges
For the purposes of TC 8634807 "high speed steel" means steel
that contains:
(a) NOT less than 0.60% by weight of carbon; and
(b)
(i) chromium; or
(ii) vanadium; or
(iii) cobalt; and
(c)
(i) molybdenum and tungsten, in such percentages by weight
that the sum of the number equal to the percentage of
tungsten and the number equal to twice the percentage
of molybdenum is NOT less than 13.5%; or
(ii) NOT less than 7% by weight of molybdenum; or
(iii) NOT less than 14% by weight of tungsten
Op. 25.08.1986
Dec. 17.07.1987
- TC 8634807
8208.20
BLADES, log de-barking machine
Op. 01.01.1988
Dec. 17.06.1988
- TC 8804000
8208.30
KNIVES OR PLATES, meat grinder/mincer, having a dia NOT exceeding
85 mm
Op. 01.02.1984
Dec. 01.02.1984
- TC 8341987
8208.30
PARTS FOR MEAT EMULSIFYING MACHINES, being ANY of the following:
(a) cutting head with feeding disc;
(b) cutting ring;
(c) insert ring;
(d) cutting head with feeding spiral
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341993
8208.30
KNIVES AND CUTTING BLADES, fruit or vegetable, being replacement
parts for industrial/commercial food processing machines
Op. 10.12.1987
Dec. 24.04.1989
- TC 8735835
8208.30
SCRAPERS, being the working tool for hog de-hairing machines
Op. 24.11.1989
Dec. 26.07.1990
- TC 9000153
8208.30.00
PARTS, BLENDER, being stainless steel cross blades
Op. 03.08.2015
Dec. 19.10.2015
- TC 1529900
8208.30.00
KNIVES, spiral machine, meat slicing, angles 10 degrees/20 degrees,
10 degrees/33 degrees and 10 degrees/20 degrees/33 degrees
Op. 24.05.1993
Dec. 27.08.1993
- TC 9304993
8208.40.10
KNIVES, CHIPPING, LOG REDUCING HEADS, being two angled chipping
faces at 53 degrees to each other, having ALL of the following;
(a) length NOT greater than 95 mm;
(b) width NOT greater than 74 mm;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(c) thickness NOT greater than 16 mm
Op. 07.03.2007
Dec. 25.05.2007
- TC 0703653
8208.90
BANDS, paper perforating, flexible steel, offset printing press
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341963
8208.90
KNIVES OR CUTTING BLADES, cylindrical, leather skiving machine
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341973
8208.90
KNIVES OR CUTTING BLADES (OTHER THAN rotary slitting knives),
envelope window cutting machine
Op. 07.02.1984
Dec. 01.01.1988
- TC 8341974
8208.90
KNIVES OR CUTTING BLADES (OTHER THAN press knives or leather
splitting knives), footwear making machinery
Op. 07.02.1984
Dec. 01.01.1988
- TC 8341979
8208.90
KNIVES OR CUTTING BLADES, strapping and tying machine
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341986
8208.90
RULES, steel, creasing, cutting or perforating
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341994
BLADES, loop pile cutting machine
Op. 29.10.1984
Dec. 29.10.1984
- TC 8433572
8208.90
8208.90
KNIVES OR CUTTING BLADES, industrial sewing machine
Op. 10.12.1987
Dec. 18.07.1988
- TC 8735870
8208.90
KNIVES OR CUTTING BLADES, non-circular, portable electric cloth
cutting machine
Op. 12.02.1988
Dec. 29.09.1988
- TC 8801545
8208.90
BAND KNIVES, continuous steel, rubber, cork or leather splitting
Op. 20.04.1988
Dec. 01.09.1988
- TC 8803845
8208.90
SHEAR BLADES, molten glass gob, high speed steel, capable of
operating at temperatures in excess of 800 degrees C
Op. 22.03.1991
Dec. 18.09.1991
- TC 9103038
8208.90.00
PARTS, HANDHELD INTERCHANGEABLE ELECTRIC TOOL, being cutting
blades
Op. 10.12.2013
Dec. 03.03.2014
- TC 1340739
8208.90.00
CLEAN CUT ASSEMBLIES, FOURDRINIER PAPER MACHINE, including ALL
of the following:
(a) brackets;
(b) litefit support plates;
(c) girders;
(d) blades
Op. 04.10.2012
Dec. 27.12.2012
- TC 1237652
8208.90.00
KNIVES OR CUTTING BLADES, domestic sewing machine
Op. 12.10.1993
Dec. 21.01.1994
8208.90.00
- TC 9310931
KNIVES OR CUTTING BLADES, SPIRAL, being ANY of the following:
(a) carpet shearing;
(b) leather shaving;
(c) hide fleshing;
(d) leather frizzing;
(e) textile shearing;
(f) sheepskin shearing
Op. 19.02.1998
Dec. 01.05.1998
- TC 9801537
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
8208.90.00
KNIVES, CIRCULAR, ROTARY PAPER LOG SAW, being alloy steel containing
chromium, molybdenum and vanadium
Op. 10.09.1998
Dec. 23.11.1998
- TC 9808058
8209.00
TOOL BLANKS AND INSERTS, cutting, consisting of a layer of cubic
boron nitride and a cemented tungsten carbide substrate
Op. 02.08.1988
Dec. 23.06.1989
- TC 8807853
8209.00
SAW TOOL BLANKS OR SAW TIPS, tungsten carbide, being tips preground
to an accuracy of + or - 0.001 in.
Op. 15.09.1989
Dec. 25.01.1991
- TC 9100532
8209.00
TIPS, cobalt base alloy, rectangular, having a width of .090 inches
to .450 inches
Op. 19.07.1991
Dec. 11.11.1991
- TC 9106676
8209.00.00
NIBS, WIRE DRAWING DIE, tungsten carbide
Op. 27.05.2014
Dec. 18.08.2014
- TC 1417773
8209.00.00
BLANKS, tungsten carbide, being ANY of the following:
(a) rectangles;
(b) squares;
(c) triangles;
(d) rods;
(e) cones;
(f) cylinders;
(g) strips
Op. 16.05.2014
Dec. 11.08.2014
- TC 1416442
8209.00.00
BIT INSERTS, ROCK DRILLING MACHINE, tungsten carbide, unfinished
blank AND/OR finished insert
Op. 16.05.2014
Dec. 11.08.2014
- TC 1416444
8209.00.00
INSERTS, METAL WORKING MACHINE TOOL
Op. 16.12.2013
Dec. 12.03.2014
- TC 1341371
8209.00.00
INSERTS, METAL CUTTING MACHINE TOOL, cubic boron nitride
Op. 14.10.2011
Dec. 04.01.2012
- TC 1134603
8209.00.00
TIPS, saw, sintered tungsten carbide, double bevel, left and right
hand
Op. 30.03.1993
Dec. 12.07.1993
- TC 9308980
8209.00.00
INSERTS, METAL CUTTING, MACHINE TOOL, having BOTH of the following:
(a) cemented carbide substrate material;
(b) ceramic coating
Op. 04.05.1998
Dec. 17.07.1998
- TC 9803729
8210.00
APPLIANCES, BISCUIT SHAPING, hand held, which may also dispense
cream or fill cakes
Op. 07.02.1984
Dec. 07.02.1984
- TC 8341998
8210.00
CRUSHERS, ice, domestic, hand operated
Op. 07.02.1984
Dec. 01.01.1988
- TC 8342001
8210.00
SLICERS, food, circular blade, domestic, hand operated
Op. 07.02.1984
Dec. 07.02.1984
- TC 8342005
8210.00
SLICERS, vegetable, hand operated, whether or not including
protective carriages for use therewith
Op. 16.04.1986
Dec. 08.09.1986
- TC 8633270
8210.00
CHOPPERS, food
Op. 02.02.1988
Item 50 applies unless otherwise stated.
Dec. 18.07.1988
- TC 8801821
Tariff
Description
===========================================================================
8210.00
MINCERS, meat
Op. 12.10.1988
Dec. 02.05.1989
- TC 8809632
8210.00
GRINDING MILLS, salt or pepper, being tableware essentially of
plastic or glass and combinations thereof, but NOT including
wooden mills or mills which contain wooden parts
Op. 04.09.1990
Dec. 27.09.1991
- TC 9007688
8210.00.00
FOOD PROCESSORS, hand operated, whether OR not in sets, having
NOT less than three of the following:
(a) choppers;
(b) graters;
(c) raspers;
(d) slicers;
(e) peelers
Op. 28.03.2014
Dec. 21.07.2014
- TC 1410881
8210.00.00
SETS, HOUSEHOLD, comprising ALL of the following:
(a) can opener;
(b) ice cream scoop;
(c) pizza cutter;
(d) peeler
Op. 11.09.2009
Dec. 27.11.2009
- TC 0933953
MILLS, GRINDING, SALT AND PEPPER, wooden
Op. 09.05.2006
Dec. 21.07.2006
- TC 0608063
UTENSILS, being ice cream spoons
Op. 25.09.2007
Dec. 13.06.2008
- TC 0812046
SUSHI MAKERS
Op. 12.06.2008
- TC 0812468
8210.00.00
8210.00.00
8210.00.00
Dec. 15.08.2008
8210.00.00
OPENERS, CAN, having a hand operated mechanical mechanism
Op. 08.07.2008
Dec. 03.10.2008
- TC 0816565
8210.00.00
EGG BEATERS, hand operated
Op. 12.11.2008
Dec. 30.01.2009
- TC 0839656
8210.00.00
DISPENSERS, dough, hand held, capable of shaping and dispensing
doughnut and pancake batter
Op. 02.12.1992
Dec. 12.03.1993
- TC 9210478
8210.00.00
SIFTERS, flour, domestic, hand operated
Op. 19.08.1993
Dec. 26.11.1993
- TC 9307480
8210.00.00
EXTRACTORS, cork, Archimedean action, being EITHER of the following:
(a) without built in foil cutter; OR
(b) in sets with a separate foil cutter
Op. 22.02.1994
Dec. 03.06.1994
- TC 9402374
8210.00.00
SCOOPS, ICE CREAM
Op. 21.05.1998
8210.00.00
Dec. 31.07.1998
- TC 9804359
CORK EXTRACTOR, lever type
Op. 25.06.1998
Dec. 04.09.1998
- TC 9805523
8211.10.00
SETS, KNIFE, self-sharpening, comprising BOTH of the following:
(a) knife;
(b) sharpening scabbard
Op. 18.11.2010
Dec. 07.02.2011
- TC 1051157
8211.10.00
SETS, BARBECUE, having NOT less than six steak knives and ANY of
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
the following:
(a) scraper;
(b) tongs;
(c) carving knife;
(d) wooden block
Op. 22.02.2010
Dec. 07.05.2010
- TC 1009273
8211.10.00
SETS, KNIFE, including stainless steel knives and ANY of
the following:
(a) bone saw;
(b) shears;
(c) sharpener;
(d) cutting board;
(e) gloves
Op. 22.12.2009
Dec. 12.03.2010
- TC 0949854
8211.10.00
SETS, BARBECUE, comprising BOTH of the following:
(a) scraper;
(b) knives
Op. 30.06.2009
Dec. 18.09.2009
- TC 0922438
8211.10.00
FILLET KITS, containing stainless steel knives and NOT less
than two of the following:
(a) stainless steel scissors;
(b) sharpener;
(c) gloves;
(d) cutting board;
(e) carry case
Op. 20.02.2009
Dec. 15.05.2009
- TC 0906067
8211.10.00
SETS, KITCHEN KNIVES, TITANIUM, having two wooden blocks
Op. 15.08.2005
Dec. 28.10.2005
- TC 0510723
8211.10.00
HOBBY CRAFT TOOL SETS, having a weight NOT exceeding 700 gms,
comprising ANY of the following :
(a) hobby knife;
(b) assorted blades;
(c) mitre box;
(d) razor saw blade
Op. 21.07.1993
Dec. 02.11.1993
- TC 9307066
8211.10.00
KNIVES, sets, with hollow ground cutting edge and blade thickness
not exceeding 1.6 mm, with or without knife block
Op. 24.09.1993
Dec. 07.01.1994
- TC 9310308
8211.10.00
SETS, assorted articles, comprising of kitchen knives and
self sharpening receptacle/s, with or without receptacle
mounting brackets or self sharpening kitchen shears
Op. 07.10.1993
Dec. 14.01.1994
- TC 9310865
8211.10.00
UTENSILS, comprising ALL of the following:
(a) combination tool, having ALL of the following:
(i) slicer;
(ii) scraper;
(iii) cutting edge;
(iv) tenderising prongs;
(b) serving tongs;
(c) at least three unplated table knives
Op. 16.02.1998
Dec. 24.04.1998
- TC 9801387
8211.10.00
KNIFE SETS, KITCHEN, stainless steel, having a HRC (hardness
Rockwell code) of 54 to 58, being BOTH of the following:
(a) minimum of 2 kitchen knives;
(b) with OR without the following:
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(i) shears;
(ii) sharpening steel;
(iii) knife block
Op. 18.09.2002
Dec. 03.12.2002
- TC 0208604
8211.10.00
SETS, KNIFE KITCHEN, stainless steel, having BOTH of the following:
(a) minimum of two (2) knives;
(b) having ANY of the following:
(i) spatula;
(ii) potato peeler;
(iii) sharpening steel;
(iv) carving fork
Op. 09.04.2003
Dec. 04.07.2003
- TC 0303900
8211.10.00
SETS, KITCHEN KNIFE, stainless steel, including knives, with OR
without ANY of the following:
(a) sharpening steel;
(b) fork;
(c) kitchen shears;
(d) knife block
Op. 17.04.2003
Dec. 04.07.2003
- TC 0304252
8211.91.00
KNIVES, TABLE, unplated
Op. 19.12.1996
Dec. 13.03.1997
- TC 9613132
8211.92.10
PARING KNIVES, having stainless steel blades AND plastic handles
Op. 11.10.2012
Dec. 07.01.2013
- TC 1238553
8211.92.10
KNIVES, KITCHEN, having stainless steel blades AND plastic
handles, being ANY of the following:
(a) bread knives;
(b) utility knives;
(c) cooks knives;
(d) santoku knives
Op. 12.10.2012
Dec. 07.01.2013
- TC 1238794
8211.92.10
SETS, consisting of BOTH of the following:
(a) glass platter;
(b) cheese knife with metal blade
Op. 02.06.2011
Dec. 22.08.2011
- TC 1117570
KNIVES, KITCHEN, stainless steel
Op. 23.10.2002
Dec. 21.01.2003
- TC 0209944
8211.92.10
8211.92.90
KNIVES, being EITHER of the following:
(a) display knives, having ALL of the following:
(i) decorated handle;
(ii) blunt blade;
(iii) blade of steel of EITHER 430 or 420 J2 grade;
(b) snap-off cutters
Op. 27.09.1996
Dec. 22.11.1996
- TC 9612476
8211.94
BLANKS, knife blade, being goods classified under subheading
8211.94.10, OTHER THAN blanks for table knives
For the purposes of TC 8633550 blanks are blades which have
NOT been subjected to ANY of the following:
(a) polishing;
(b) sharpening;
(c) branding;
(d) handle fitting;
(e) tempering
Op. 28.05.1986
Dec. 23.02.1988
- TC 8633550
8211.94
BLADES, trimming knife, replaceable
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 09.03.1988
Dec. 24.05.1988
- TC 8802925
8215.20.00
SETS, CHEESEBOARD, consisting of ALL of the following:
(a) wooden cheeseboard incorporating a pull-out side draw;
(b) NOT less than three cheese knives;
(c) cheese fork
Op. 11.01.2012
Dec. 26.03.2012
- TC 1201194
8215.20.00
SETS, BARBECUE, including NOT less than ANY two of the following:
(a) tongs;
(b) multipurpose utensil;
(c) scraper;
(d) brush
Op. 01.04.2011
Dec. 20.06.2011
- TC 1111094
8215.20.00
SETS, BARBECUE, comprising BOTH of the following:
(a) multi-purpose lifting tool;
(b) tongs
Op. 18.11.2010
Dec. 07.02.2011
- TC 1051469
8215.20.00
SETS, BARBEQUE, consisting of BOTH of the following:
(a) scraper;
(b) tongs
Op. 22.02.2010
Dec. 07.05.2010
- TC 1009277
8215.20.00
SETS, HOUSEHOLD, comprising ALL of the following:
(s) turner;
(b) spoon;
(c) spaghetti server;
(d) whisk
Op. 11.09.2009
Dec. 27.11.2009
- TC 0933955
SETS, CARVING, comprising ALL of the following:
(a) knife;
(b) fork;
(c) board
Op. 30.06.2009
Dec. 18.09.2009
- TC 0922440
8215.20.00
8215.20.00
SETS, CHEESE BOARD, comprising ALL of the following:
(a) cheese knives;
(b) cheese fork;
(c) cheese board incorporating a magnetic knife holder
Op. 30.06.2009
Dec. 18.09.2009
- TC 0922439
8215.20.00
SETS, KITCHEN TOOLS, comprising NOT less than ANY two of the
following:
(a) skimmer;
(b) ladle;
(c) spaghetti server
Op. 29.07.2008
Dec. 17.10.2008
- TC 0823646
8215.20.00
BARBECUE SETS, comprising BOTH the following:
(a) multi-purpose utensil having ALL the following functions:
(i)
fish slicer;
(ii) plate scraper;
(iii) cutting edges;
(iv) meat tenderising prongs
(b) metal bristled barbecue cleaning brush having a metal plate
scraper
Op. 26.07.1993
Dec. 29.10.1993
- TC 9307158
8215.20.00
BARBECUE PACKS, comprising BOTH of the following:
(a) multi-purpose utensil having ALL of the following functions:
(i) fish slicer;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(ii) plate scraper;
(iii) cutting edges;
(iv) meat tenderising prongs;
(b) food serving tongs
Op. 26.02.1993
Dec. 04.06.1993
- TC 9308556
8215.20.00
UTENSIL SET, unplated stainless steel, consisting of:
(a) slotted spoon;
(b) large ladle;
(c) slotted turner;
(d) fork;
(e) solid spoon;
(f) five hook rack
Op. 02.03.1994
Dec. 03.06.1994
- TC 9403518
8215.20.00
SETS OF UNPLATED IMPLEMENTS, consisting of ALL of the following:
(a) knives;
(b) forks;
(c) spoons;
(d) spatula;
(e) salad cutlery;
(f) ladles;
(g) sugar tongs;
Op. 27.12.1994
Dec. 12.09.1995
- TC 9500461
8215.20.00
SETS, CUTLERY, UNPLATED, having two OR more of ANY of the following
OR any combination of the following:
(a) knives;
(b) forks;
(c) spoons
Op. 04.12.1996
Dec. 28.02.1997
- TC 9612777
8215.20.00
BARBECUE SETS, stainless steel, comprising at least three (3) of
the following:
(a) fork;
(b) tongs;
(c) spatula;
(d) cleaning brush;
(e) corn cob holders;
(f) salt and pepper shakers;
(g) skewers
Op. 11.11.1999
Dec. 31.01.2000
- TC 9908643
8215.20.00
SETS, CARVING, stainless steel, comprising ALL of the following:
(a) knife;
(b) fork;
(c) sharpening steel
Op. 09.04.2003
Dec. 27.06.2003
- TC 0303899
8215.20.00
SETS, UNPLATED IMPLEMENT, stainless steel, comprising BOTH of
the following:
(a) minimum of three (3) knives;
(b) having at least four (4) of the following:
(i) carving fork;
(ii) spatula;
(iii) sharpening steel;
(iv) potato peeler;
(v) lemon decorator;
(vi) lemon zester;
(vii) tying OR larding needles;
(viii) fish knife;
(ix) oyster knife;
(x) shears;
(xi) apple corer;
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
(xii) cleaver;
(xiii) icing funnel;
(xiv) potato baller and/OR melon baller
Op. 09.04.2003
Dec. 04.07.2003
- TC 0303901
8215.99
8215.99
8215.99
TONGS, food serving
Op. 22.11.1988
Dec. 12.01.1989
- TC 8809911
KNIVES, fish or butter, unplated
Op. 26.10.1989
Dec. 11.01.1990
- TC 8907754
CAKE/PIE SERVERS, unplated
Op. 22.04.1991
Dec. 09.10.1991
- TC 9103952
8215.99
UTENSILS, barbecue, multi-purpose, incorporating ANY four of the
following features:
(a) fish splicer (spatula);
(b) plate scraper;
(c) cutting edge;
(d) meat tenderising prongs;
(e) bottle opener;
(f) fat drainer
Op. 07.02.1992
Dec. 14.05.1992
- TC 9201845
8215.99
HOUSEHOLD TOOLS, unplated, being ANY of the following:
(a) spoons;
(b) forks
(c) fish knives;
(d) butter knives;
but NOT including household tool souvenirs
Op. 04.11.1998
Dec. 24.12.1998
- TC 9811020
8215.99.00
PALLET KNIVES, CAKE DECORATING
Op. 14.05.2014
Dec. 28.07.2014
- TC 1416098
8215.99.00
FORKS, APPETISER, stainless steel and plastic, having novelty
handles
Op. 01.08.2012
Dec. 15.10.2012
- TC 1227732
8215.99.00
KITCHENWARE OR TABLEWARE, being stainless steel pizza lifters
having a beechwood handle
Op. 29.12.2011
Dec. 03.04.2012
- TC 1142585
8215.99.00
TABLEWARE AND/OR KITCHENWARE, being stainless steel AND plastic
tongs
Op. 24.06.2011
Dec. 12.09.2011
- TC 1120784
8215.99.00
KITCHENWARE, stainless steel AND plastic, being combination
serving spoon and tong
Op. 24.06.2011
Dec. 12.09.2011
- TC 1120789
8215.99.00
KITCHENWARE, stainless steel, being hand held fish slicers
- TC 1117574
Op. 02.06.2011
Dec. 15.08.2011
8215.99.00
SETS, KITCHEN UTENSIL, comprising ALL of the following:
(a) grater;
(b) tongs;
(c) can opener
Op. 10.07.2009
Dec. 25.09.2009
- TC 0924409
8215.99.00
UTENSILS, being ANY of the following:
(a) spatulas;
(b) spaghetti servers;
(c) turners
Item 50 applies unless otherwise stated.
Tariff
Description
===========================================================================
Op. 25.09.2007
8215.99.00
8215.99.00
8215.99.00
Dec. 13.06.2008
- TC 0812048
UTENSILS, being EITHER of the following:
(a) corn holders;
(b) BBQ cleaning scrapers
Op. 29.10.2008
Dec. 16.01.2009
- TC 0837719
SCOOPS, BBQ
Op. 08.12.2008
Dec. 27.02.2009
- TC 0842984
FORKS OR SPOONS, TABLE, unplated
Op. 05.02.1997
Dec. 21.04.1997
- TC 9701039
8215.99.00
HOUSEHOLD IMPLEMENTS, unplated, being ANY of the following:
(a) spoons;
(b) forks;
(c) fish knives;
(d) butter knives
Op. 02.10.1998
Dec. 11.12.1998
- TC 9808928
8215.99.00
HOUSEHOLD TOOLS, unplated, being EITHER of the following:
(a) ladles;
(b) skimmers
Op. 12.11.1998
Dec. 22.01.1999
- TC 9810035
8215.99.00
SKEWERS, BARBECUE, stainless steel
Op. 11.11.1999
Dec. 31.01.2000
Item 50 applies unless otherwise stated.
- TC 9908642